Reminder that orders for these kits close on the 30th of November so if you are interested in getting one contact me via email at chris@tofuautoworks.com or by using the contact form on my website. Full info and pricing are in the video description. tofuautoworks.com/contact/ Please note that these kits are currently only being sold in New Zealand and international sales will start early next year. If you live outside of NZ and still would like to place an order please email me to have your name added to the waitlist.
The design is spot on! Transition lines between shapes ale subtle but distinguishable. It all fits so nicely! Panel gaps are perfect and surface finish is on another level. That is some long-term planning and you have so much patience and skill! Not only on the execution side but on the design also. Keep up the awesome work!
I will be wrapping up this project as it is but have plans for a few long term additions to it like a roof spoiler and other things, but those will wait until later.
Just a small upper "tail" type spoiler along with a tiny , below the window "flick" would look sick...or...a 3pc thin wraparound that "extended" both rear quarters from the taillights, upward, like an inch-1.5" extension, that blended into the top which itself, stuck out, and just _barely_ upwards.... think U or C shaped 3pc that literally extended the entire rear quarters and top lip of the hatch (as a tail) that looked like one piece.... maybe even starting flush at the lower taillights and extending further as you got further up to the top of hatch.... I know I've seen something I'm trying to describe on a vehicle before, just trying to think what the hell it was on lol.... maybe it was a Renault 5 Turbo hatch extension or something (nope, just checked, that spoiler goes around the top edge of the roof like 3pcs, I'm talking about just extending the _rear_ of the vehicle itself with a little lip...but I definitely seen it somewhere 😅)
I built fiberglass boats for 35 years, it's funny how similar your methods are to the ones we used in r&d. I can say you absolutely do it right, not cutting corners. In one of your earlier videos there was discussion about wedges, something we would do on complex parts that had cutouts like a gas filler etc., Drill a hole in the cutout area, countersink it and scuff it, tape it off Cut a piece of 3/8" (9.5mm) copper tubing about 6" (150mm) long and flare the end. Slide this into the hole half-way, coat it with a bit of resin filler before sliding it down so it squishes out a bit with the flared end flush on the parts surface. Smooth it out, after it hardens just sand it and pull the tape, polish it. You end up with a copper tube opening into the part When you're ready to pull the part, just stick an airblower into the copper tube from the outside and it'll pop the part off without effort Idk if it helps here but it does make pulling parts easy
Thanks mate, a lot of the advice I've gotten over the years has been from boat builders, you guys are the masters at fiberglass. I've heard about all these tricks for air to release parts and I'll look into it in the future with larger parts like if I ever wanted to make a mould of a full front clip or a hard-top for my miata. But these small pieces pop out of their moulds almost too easily with that semi permanent release agent.
Woke up early on a sunday was anoyed at its 7am here in uk.... Made so much better by waking up to a tofu notification has juat made my weekend, keep. Constantly learning with every video... Thankyou
33:03 This is crazy, I think I would change the taillights too, I don't know why but it reminds me of some old BMWs, congrats, I can't describe how good it's looking
I just wet sanded and polished the headlights on my car, twice… put a layer of clear coat on after the first try and it went terribly wrong. Probably the wrong kind of clear and maybe too cold. The paint was cracked all over.I couldn’t leave it. So the next day I did it all again. The skin on some of my fingers are almost gone. But I’m very satisfied with my work, doing all the steps and getting a god result in the end. watching this episode reminded of how much I learned about sanding from channel. Thank you!
This thing is SO COOL!! It's been a long time coming, I hope you're as excited to put it together as we are to see you pushing closer to the finish line. The Sky-gea is truly amazing!!
Woke up at 3am here in the states and can’t sleep. Open my phone and booom tofu time!!! Amazing work, just amazing to watch the craftsmanship. Spot on!!
Hola Amigo, cada vez que veo tus videos me quedo loco con lo bien y la perfección que lo haces, muy profesional y que muy pocos lo hacen, Seguí así y muchos éxitos. Saludos de Argentina!!!
Oh gawd i feel the emptiness coming in few months. I guess you could make the hood/bonnet rear corners longer to follow the a-pillar and front fender/wing contour a bit nicer. Only if theres room for wipers/windshield/a-pillar. Also, this kit in CF would be 😍. Great work as always!
I’m always blown away by your work. But a thought just occurred to me, not only are you working on the Stagea but youre running your own business at the same time and editing these videos too. You’re a hard working man! One question, do you sleep? 😂
You ever see like a masterfully done tattoo and you're like "this is so incredibly done The artistry the execution absolutely fantastic" but it's like a tattoo of a goat banging a carrot. That is sort of how I feel about this car project.
Looks great!! Looking forward to a sick paint job!!! Also, have you given any thought to the interior? To give it a bit of that SEMA feel??? All the best!
Reminder that orders for these kits close on the 30th of November so if you are interested in getting one contact me via email at chris@tofuautoworks.com or by using the contact form on my website. Full info and pricing are in the video description.
tofuautoworks.com/contact/
Please note that these kits are currently only being sold in New Zealand and international sales will start early next year. If you live outside of NZ and still would like to place an order please email me to have your name added to the waitlist.
Well then looks like I have to wait 😊
It’s going to be incredible seeing these in the wild.
Tofu auto works
80% sanding
20% magic
Only 80%?
The magic lies within the sanding 🧙♂️
The design is spot on! Transition lines between shapes ale subtle but distinguishable. It all fits so nicely! Panel gaps are perfect and surface finish is on another level. That is some long-term planning and you have so much patience and skill! Not only on the execution side but on the design also. Keep up the awesome work!
This kit makes me want to buy one just to stick the kit on!!!!
Roof spoiler please, master craftsman at work
I will be wrapping up this project as it is but have plans for a few long term additions to it like a roof spoiler and other things, but those will wait until later.
@@TofuAutoWorks #spoilers XD i was wondering about that...... and the tail end of the car. looking good Dude!
Just a small upper "tail" type spoiler along with a tiny , below the window "flick" would look sick...or...a 3pc thin wraparound that "extended" both rear quarters from the taillights, upward, like an inch-1.5" extension, that blended into the top which itself, stuck out, and just _barely_ upwards.... think U or C shaped 3pc that literally extended the entire rear quarters and top lip of the hatch (as a tail) that looked like one piece.... maybe even starting flush at the lower taillights and extending further as you got further up to the top of hatch.... I know I've seen something I'm trying to describe on a vehicle before, just trying to think what the hell it was on lol.... maybe it was a Renault 5 Turbo hatch extension or something (nope, just checked, that spoiler goes around the top edge of the roof like 3pcs, I'm talking about just extending the _rear_ of the vehicle itself with a little lip...but I definitely seen it somewhere 😅)
@@TofuAutoWorks 👍That "infamous" rear end😬But the car looks Orsum Dude👍
I built fiberglass boats for 35 years, it's funny how similar your methods are to the ones we used in r&d. I can say you absolutely do it right, not cutting corners.
In one of your earlier videos there was discussion about wedges, something we would do on complex parts that had cutouts like a gas filler etc.,
Drill a hole in the cutout area, countersink it and scuff it, tape it off
Cut a piece of 3/8" (9.5mm) copper tubing about 6" (150mm) long and flare the end.
Slide this into the hole half-way, coat it with a bit of resin filler before sliding it down so it squishes out a bit with the flared end flush on the parts surface.
Smooth it out, after it hardens just sand it and pull the tape, polish it.
You end up with a copper tube opening into the part
When you're ready to pull the part, just stick an airblower into the copper tube from the outside and it'll pop the part off without effort
Idk if it helps here but it does make pulling parts easy
Thanks mate, a lot of the advice I've gotten over the years has been from boat builders, you guys are the masters at fiberglass.
I've heard about all these tricks for air to release parts and I'll look into it in the future with larger parts like if I ever wanted to make a mould of a full front clip or a hard-top for my miata. But these small pieces pop out of their moulds almost too easily with that semi permanent release agent.
Two words
PERFECT CRAFTSMAN
Woke up early on a sunday was anoyed at its 7am here in uk.... Made so much better by waking up to a tofu notification has juat made my weekend, keep. Constantly learning with every video... Thankyou
33:03 This is crazy, I think I would change the taillights too, I don't know why but it reminds me of some old BMWs, congrats, I can't describe how good it's looking
Just 30 seconds in but just standing there like this... she's a beauty!!!
Wataru Kato would be proud of your work.
GOODNESS! That. Is. Awesome! I can't wait to see it painted. I hope it gets a front splitter and spoiler too. Well done and congratulations!
so little bodywork needed is a testament to how well you made your kit... amazing work as always
Even the sheep said its looking good. Cant wait to see it once the car is fully painted
Looking SO good!!! Amazing effort and skillset 👏
I just wet sanded and polished the headlights on my car, twice… put a layer of clear coat on after the first try and it went terribly wrong. Probably the wrong kind of clear and maybe too cold. The paint was cracked all over.I couldn’t leave it. So the next day I did it all again. The skin on some of my fingers are almost gone. But I’m very satisfied with my work, doing all the steps and getting a god result in the end.
watching this episode reminded of how much I learned about sanding from channel. Thank you!
Great job !! Love the whole project .... 💪
This thing is SO COOL!! It's been a long time coming, I hope you're as excited to put it together as we are to see you pushing closer to the finish line. The Sky-gea is truly amazing!!
Your attention to all of the details is on another level! Love how this project is turning out and looking forward to the finished product
Molto bello!! A mio gusto però troverei una leggera soluzione aerodinamica anche per la parte superiore del portellone posteriore.
IVe been watching this guy for awhile now. and ive never heard him make a noise ever. but that low spot at 8:15
Stunning and beautifully well crafted, how I wish it were mine... paired with those wheels, makes it a complete package!
Still this is one of the coolest builds ever 🎉
Woke up at 3am here in the states and can’t sleep. Open my phone and booom tofu time!!! Amazing work, just amazing to watch the craftsmanship. Spot on!!
This man has an unhealty obsession with sanding! Sheez... But his attention to detail is second to none!
Watching this was like medication to my mental health.. feeling ready to accepting monday
Holy cow, i'm so stoked to see this thing finished 😍 it definetely came a long way.
Can't wait to see it in the final colour!
Perfect, just got home from work (9am UK), time to watch!
You must of worked a terrible shift
This looks absolutely amazing, you should be proud of your work!
The B-roll with the noises from the country side, the gravel driveway, everything just squeals Forza Horizon
Dang all your parts always come out looking amazing you definitely have mastered fiberglass can’t wait tell you start doing carbon fiber!
Hi; This Wagon needs a back wing and a beautiful paintwork. Go the extreme because its worth it. Top master craftsmanship Tofu.
お疲れ様です！
遂にプラサフまで来ましたね！
いつも素晴らしい出来で尊敬します。
完成までもう一息！
無理せず頑張ってください！
Looks fantastic! All that hard work paid off!
Really clean build! Can't wait to see it painted
I'm so ready to see this thing painted
That looks mint as! Worth the many many hours of sanding!!
⭐Thats one Orsum tow rig⭐Churr Much👍
Unreal work as always mate! I can see why everyone is saying it needs a spoiler. final piece of the puzzle I reckon!
Epic! I’d love to see a little wing or lip off the top of the boot/trunk hatch
The right colour is going to set this car off!
Это реально очень круто. Мужик ты Красава 👍 .
Машина смотрится очень интересно, и вызывающе. Без внимания на дороге она не останется.
Жму руку 🤝
Just watching all this sanding is making my back hurt. You must have an amazing chiropractor!
Can't wait to see this finished, it's looking so good so far!
Just needs an epic spoiler. Good work!
Can’t wait to see the results. Love your project, mate
Hola Amigo, cada vez que veo tus videos me quedo loco con lo bien y la perfección que lo haces, muy profesional y que muy pocos lo hacen, Seguí así y muchos éxitos.
Saludos de Argentina!!!
“With no more moulds to make I don’t know what to do…”
Time to find a VR38DETT and get a big tin of Bayside Blue
Looks so clean!
Best ASMR channel on youtube🎉🎉🎉❤❤❤
Amazing work matey! Keep up the great content, it's much appreciated 👍 👌 😊
Que ganas de verlo rodando y pintado,eres un máquina muy muy bien trabajo felicidades un saludo desde Cádiz España
Geat Tofu 🎉.
Bon travail de préparation.
Awww yisss, primer time!
Perfect fit 🎉. Just amazing!!!
The end of an era! Almost.
Oh gawd i feel the emptiness coming in few months. I guess you could make the hood/bonnet rear corners longer to follow the a-pillar and front fender/wing contour a bit nicer. Only if theres room for wipers/windshield/a-pillar. Also, this kit in CF would be 😍. Great work as always!
Look Amazing man seriously piece of art
I wish to build my one 🙊🙉🙈😎🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏
Just beautiful sir
Looks fantastic!!!
Almost ready for the VR38 swap!
Tofu master adds putty to a part I thought was finished 6 parts ago. Here we go again. 😉
Wow, what a wonderfull work 👍👍👍👍👍👍 Best regards from Germany
Have you thought about adding some sort of spoiler to the upper portion of the liftgate?
One day I will buy one of tofu shops kits
Yes please, I've been living of cup-ramen and sanding dust for 3 years.
*dayummmmm looking beautiful!*
Looks incredible
塗装が楽しみです。
完成が早く見たいです！
Patience is a virtue.
💕Gøöd things take time 😎🙏
素晴らしい👍完成が楽しみ
Bayside blue 👌👌
This epic build better end up an epic colour like Midnight Purple or Millennium Jade 😅
Those parts look sooo nice.
I’m always blown away by your work. But a thought just occurred to me, not only are you working on the Stagea but youre running your own business at the same time and editing these videos too. You’re a hard working man! One question, do you sleep? 😂
@@derekbarker5870 I get a few ZZZ's in between sanding strokes
Beautiful car good job
Stunning , I’m hoping you choose midnight purple or millennium jade 😎
fire mate!
Great work can’t wait to see the results!!
Brutal!!! Gran trabajo 👌🏻👌🏻👌🏻
You ever see like a masterfully done tattoo and you're like "this is so incredibly done The artistry the execution absolutely fantastic" but it's like a tattoo of a goat banging a carrot. That is sort of how I feel about this car project.
ATBGE (awful taste but great execution) haha. These strange builds are kinda my whole deal. Making cars that everybody likes is boring.
perfection
any plans on a spoiler for the rear. i think a mid spoiler and a BIG WANG would suit it so well
это выглядит нереально круто!!
To realy complete this I think you need to do the 4 door handles from GTR🔥🔥🔥
support from indonesia , sucses bro✨
Super!!!!! 👍👍👍👍🔥🔥🔥🔥
Lookin mean in grey 👍
amazing job, when will the hood latch area get some love?
I had someone ask me once why I was sanding perfectly smooth paint . I had to explain to them that if I didn't the new paint would just fall off .
maybe you can do the gtr style taillights on the back and rear bumper
Looks great!! Looking forward to a sick paint job!!!
Also, have you given any thought to the interior? To give it a bit of that SEMA feel???
All the best!
It looks nice but i thing it needs a wing or a Spoiler in the end 😊
Sick. However imo I think it's missing a roof spoiler to finish it off 👌
The RS6 Avant of Nissans.
You need more big wheels ❤
Задние расширения нужно было поднять до нижней линии остекления. Передняя часть смотрится хорошо, а задняя инородно.
Looks aweosme. What colour will you be painting the car? Midnight purple?
YO! thats nice
Big day!
Bro really took 2 years to finish it damn
very very nice :)