Always check the case length. .357 does stretch after only a couple reloadings depending on the load. It can be very important to prevent high pressure to have the case the correct length.
Getting into this rabbit hole of reloading. So far have a reloading bible on the way and watching tons of videos to get a good idea on where I want to start. I have been taking notes on equipment used, steps, and experience tips. Thank you sir for your well informative video and sharing your knowledge.
Enjoyed watching from the beginning to the end. I actually learned. About the crimping where the LED jumps out of the case when being fired never heard that before thank you
Went to my first gun show, and was informed of Lee's tooling and reloading. Looked for a video for reloading 357 Magnum loads for my D.E. and how-to steps, and you Sir...nailed this video with great comments and step by step processes you took and watched for. Great Job!! I think I could nail this process as a first time re-loader.
Nice explanation. I just purchased an SP101 .357, 3incher, and as soon as I get all the components I will handload. Thanks for being thorough and wasting no time.
I love the .357 Mag round and the great thing about it, like other Pistol rounds when you fire it through a rifle instead of the your S&W 686 it changes the characteristics of the round.
Your probably good for 250+fps faster from a rifle. I love the idea and practice having rifles and revolvers in the same cartridge. Watch this video you will enjoy it. th-cam.com/video/ZCpfFLLANr4/w-d-xo.html
I've been reloading ammo for around 15 years now to include.357 and I still watched the entire 33min and 30sec of your video lol great job. Right now all my reload stuff is in storage do to me moving these videos are the next best thing thank you
I'm 73 and have been reloading for 50+ years. My first press was a Pacific single stage press. Then, I moved up to a Hornady auto-indexing progressive press and later got rid of it. The only times I've ever gotten a squib was on that progressive press. Now, I use a Dillon 550C and 'i have to spin the shell plate by hand. Haven't had a squib since I got the Dillon. I didn't like having to readjust the dies between reloading 38's and 357"s, so I've bought a second set of 38/357 dies. Now, I have 2 sets of 38/357 dies, one dedicated to 38's and the other dedicated to 357. I also use a beam balance to get my charge weight, but i shoot for just under my target weight, then i use a Powder Trickler to come up to exact weight.
I have been loading the 357 Mag for 40 years. My favorite loads" 125g HP from Rem, Win, Hornady 17.8g of IMR 4227, cci 550, 18.0g of H110, cci 550 both of these loads are in the 1800 fps area with 6" barrels 158g Lyman SWC with gas check 14-15g of AA2700 185-200g SWC from GT Bullets Unique powder, 850 fps, unreal accuracy with both of these bullets I killed half a dozen coyotes with my 6" GP 100 with the 125s when I lived in Az, but have owned many Rugers, S&W's in this caliber. The GP 100 in some models allow you to swap out the front sight to a beaded sight and a V notch rear sight, which allows for a very fine hold. The 125g load with the 4227 is a good 100-yard load in a gun that has good sights and an improved trigger.
I would like to point out that different books state different max. loads so it is useful to study more than one book to determine your load especially if you are near minimum or maximum charge. As an example the Speer reloading manual shows a max. of 17.8 grains for a 158 grain bullet and shows a much slower muzzle velocity of 1330 fps from a pistol and 17.5 grains of H110 for the max. in the rifle and a muzzle velocity of 1866 fps.
My son gave me a Ruger GP100 in 357 for christmas. i went to buy ammo. Holy Crap. $53 bucks for 200 rds want to get into reloading, but know nothing about it. your video was a big helpin pointing me in the right direction, thank you.
Great Video, Thanks for taking the time to take the viewers through the process from start to finish. Especially explaining everting step by step. Found it very informative. Two thumb’s up.
Nice video. I just got my self a GP100 this week and this guy at the range convinced me to start reloading for it. I can't believe it's a dollar a round for you. My local cabelas has 50 158 grain rounds for $22 and some change.
Only been reloading for about 4 months and .308 only, but I’m just about to start reloading .357 Magnum and this video is exactly what I was looking for. I have the same Lee die set you have, and was unsure about the case flaring, but now my questions have been answered and I feel I can get started with the 250 cases I have already prepped. Good video.
Great reloading 101 video, I have just started thinking I want to reload a lot of the brass I have been saving and so far this has been the best how to video I have seen. You took us through the cleaning and saying what you used for that all the way to finished project with lots of great details on press use. Thank you very much for all the info, looking forward to checking out some of your other videos now.
I feel like I'm way, WAY too much of a casual shooter to get into reloading, seeing how much work it is and how expensive the tools are, maybe some other day when I live in a place that has the space for the press and such. Thank you for the detailed video about the process!
In the overall scheme of many years of active shooting, reloading is very cost effective. The equipment isn't that expensive, but it depends on what you buy. Most of my simple equipment is Lee and i've been using the same stuff for 25 years. it has paid for itself. It is still cheaper than buying factory ammo for all of your shooting. Now, if you hunt a couple times a year and maybe one or 2 range sessions a year with just a couple different guns maybe reloading isn't for you. It is a fun and relaxing hobby, at least for me. Some people make it seem much more complicated than it really is.
Enjoyed the video I did notice you changed powder throw techniques a couple of times. I try to do everything the same way every time. Especially when throwing powder to maximum loads.
I know the video is old but I loaded some XTP Hornady 125 with 18.4 gr of H-110 straight out of the Hornady load data I have the lee book and the Lyman book as well but I use the Hornady book mostly. Good video though
This is probably the best reloading video i've watched. Nothing but information comes out of your mouth...no bs...great demo. I am using the same press and dies. I am also reloading the same bullet. I set up my dies last night only to find I don't have any small pistol primers. Can I use CCI small rifle primers? I am seeing mixed opinions and vague explanations on how it can be done. Thanks! Subbed!
@@biged7175 Thanks for asking. GP100 7 shot stainless steel 357mag. I called the shop I normally purchase my powder and primers from...they want $200 for a 1000. Ridiculous. I called a friend who helped me get into reloading...he GAVE me 500 small pistol Magnum primers. I gave him 500 rounds of various bullets. He didn't want anything for the primers...but I told him he needed to be humble and accept just like I was for the primers.
Hi Big Ed! Beautiful video! Can I ask you a question about recharging even if it's been years since your video? With an average dose of powder for range shooting can I use standard primers or is it always better to use magnum in 357 caliber? Congratulations for your video! Explanation and perfect skill in reloading!!
This is a great class on reloading! My wife and I are debating getting into reloading .38sp and .357, and this video made me feel like we could do this. We watch about an hour to 90 minutes of shows a night, and I think this is something I could do while we do that. How long, from start to finish, do you think it takes to reload 100 rounds once you get it all dialed in?
Nice video, thanks. I'm a precision long shooter/loader amatuer. You're loading hot and the powder dispenser tends to vary more than a little if you check it with a precision scale. I'm guessing your not worried about the variance of powder even though it's a hot load? It really saves time vs a precision scale so.... THoughts? Just bought a colt python.
Your very right and I agree 100% for handgun rounds 20-40 fps does not matter, bench resting and firing magnum revolver rounds hundreds of yards does not interest me. Watch my .308 reloading video I'm rocking a powder trickle for precise charges. th-cam.com/video/Yhry9WGtKXg/w-d-xo.html
The packet your dies are in has "carbide sizing die" written above it. You DO NOT have to lube straight wall handgun cases with carbide dies. I have reloaded probably ten thousand rounds of .357 mags, .38 special, 327 & 32HR mags . Never lubed a single case or had one stuck. I' was using Lyman & Hornady carbide dies. The following quote is a Lee product description of the four die carbide set like yours: "Carbide dies do not require the cases to be lubricated prior to use like non-carbide dies."
I have already found that if you don't have the flare/decapping die adjusted correctly you get waaay too much flare and I'm going to assume a bunch of scrap brass if I can't rework them in the sizer. Thoughts? I have purchased a digital caliper (Harbor Freight $8.50 on sale) and am going to take another run at it.
Thanks for the reply, yes the video does show that so it is less of a question than an "aw crap". I ran a bunch through before I saw your video and apparently overflared a bunch of cases while also decapping. Now I am resizing them to try to salvage some of them.
This is the best video about reloading 357 that I have found on TH-cam. You explained every step very well and made it very easy to follow, so thank you for that. I just bought a S&W 686 plus 4" and shooting it does get $$$. I ordered a LEE single stage reloader kit along with the LEE dies. Where do you buy your primers, bullets, and powder from?? Once again, great video I'll watch your others for sure. Thanks again.
Great comprehensive tutorial video, I’ve hand cast some 158 gr swc I’ve also gas checked them would these heads be treated as almost the equivalent of the hornady heads you are using? I’m using alliant unique any guide for a safe hot load for these?
Great video with good information... Why do you lube your cases ? It caught me eye as most all die sets have a resizer die that does not require case lube on straight wall cases , inside the die is a carbide ring ... Around 1966 is when i first bought a resizer die that was carbide TI and i really like that idea of not having to use lube on my cases ..
This is one of my most frequently asked questions. I'm just in that habit of lubing everything I work in the marine biz, so everything gets lube, it can't hurt. th-cam.com/video/MHzC6cLUlZc/w-d-xo.html
How much does it end up costing to get started with this? Does it take a long time before you start saving money (labor excluded ofc)? Is there a general rule of thumb for how many times you can safely reload the dame case before it becomes risky or are there any signs that a case is too worn to reuse? Sorry about all the questions. Interesting video!
You will save money over time the larger the round the more you save. I would buy a reloading manuel and ready it. Your question about brass life is a good one but many possible awnser.
RCBS makes an excellent tool for inserting primers. It's more expensive than the Lee but well worth it IMHO. I prefer to hand prime because of the greater feel and control of that operation. Plus, I can sit and watch videos and bust out hundreds of cases doing it that way. To each his own though.
Thank You! I'm new to reloading, and I'm going to be reloading .357 magnum! I think this one of the best videos on .357 magnum! Did these loads work out? Have you fire them yet?
Thank you for the video. Well made, pleasure to watch. I am reloading with the same powder and here is the question: I've got same weight projectile 158grains, but round nose one, should I use same charge of powder, or the type of bullet will make a difference in velocity? I appreciate your attention to this matter. Happy shooting!
The only thing that really matters is the weight of the bullet (grains) and if its lead or full metal jacket. If there FMJ 158's than load the, with the same charge, what revolver are you using?
Those plated bullets are a gimmick, they are just lead bullets made to look like FMJ for a rule of thumb I would subtract 10% from max loads for lead bullets or look up a load for lead 158's. Also your K frame will like those better, I run mine from an L frame 686.
I'm thinking about starting to reload for my Marlin rifle in .357. Is there any other information specific to reloading 357 for rifles that might be worth noting?
ED: I have a question. First, I enjoyed your video. I have been hand-loading since the mid 1960's I load 38/357, 380 auto, 9mm, 38 super, .40 S&W, 45 acp, 45 long colt.and 44 spl. I have the same LEE die set you have. I have Carbide sizing dies for all my straight wall cases including 30 carbine and I have never put any lube on a case during my re-sizing operation while using the carbide sizing die. Is this just an extra step you take. I use the lube on any rifle cases with a shoulder and one wildcat case that I make necking a .45 ACP case to 9MM. Keep up the good work.
I think it is a step that slows you down and is a messy step. Especially with carbide dies. Should not have a problem with shells sticking with these straight wall cases like this. It is not necessary at all.
Quality information, thank you very much! I do have one set of questions remaining: If you'd have to trim the rounds, at what point would you do so ? Right after cleaning them ? And do you trim them to the exact length the book tells you to? Does the resizing step affect that length at all ?
+Frederik Claeyssens Most handgun cases with straight walls will not need trimming. Watch this video I made it might help. th-cam.com/video/mFjS_My9PMU/w-d-xo.html&spfreload=10
Thanks. This was a great informative video. Question: Can you extract the old primer and then put the cases in the tumbler to clean out the primer well?
Great video but I too have some questions. I will be reloading for a 16" .357 Henry Rifle. I know I will need a slower burning powder to get the velocities I want in the longer barrel, so could you recommend a powder and a bullet weight for self defense?
+Lee Greger For the henry I would just load H110 max loads your splitting hairs after that. 357 for self defense just buy Hornady 125's XTP JHP there one of the gold standards for self defense.
H110 or W296 are the same powder, and it's a true "magnum pistol" powder which will give you the velocities you need. I also use Hornady 125 gr XTP bullets and they work really nice out of my Henry Big Boy. (and out of my revolver, too, but with more fireball)
I would follow my lead and run my loads, they work great from a 6" revolver and will be faster out of a 16 rifle. Use hornady xtp bullets and Hogdon H110 powder
I have loaded and hunted with the .357 for many years. I use both handguns and rifles. I have harvested many deer and 3 elk with my .357. I use slower burning powders such as 2400 or Blue Dot so I can load hot and not explode my handguns if I should mix up the loads. From my 2 inch revolver there is a lot of flame if I use the rifle charges but the firearm is just fine it's just a waste of powder.
This is a great vid! I've been wanting to start reloading. You made it easy to understand. I have a 686+ (4 in). It's expensive to run a couple hundred rounds every other week at the range. My question, how cheap can I make warm loaded 357 just for plinking? That's kind of my biggest concern is how much I'll save compared to 20 bucks a box of 50 at wally world.
The big cost of reloading is the projectile second is primers, you should be able to get 100 .357 bullets for $20 which means you could load 50 rounds for $13-$15 dollars.
Great video, thanks for posting. Im curious, depending on charge and type of cases, what's a typcial lifespan of the brass? Can you re-use more than twice?
+Scott S I have some 9mm that I have loaded 6-7 times and it's still fine. I would keep loading 357's untill the case cracks or primer pockets are to loose.
+Big ED thanks for the prompt reply and information. That makes the overall cost per round much less if I don't have to buy new brass each time. I'm just researching reloading now to gain a better understanding. Don't have a smith though, just got a Alfa proj 357 6" barrel
A good trip for the cleaning media in the shell tumbler. Go to a pet store and buy crushed walnut shells. It's used as a bedding material for lizards and it works great. Was way cheaper too.
@@ClearWater7.62 Read/buy a reloading manual first, watch my video's more carefully there are a bunch of them uploaded. For me squib loads and mashing the case pushing in a projectile.
The worst part of reloading is case prep. Once case prep is done loading it is easy. I always have to say to beginners you don't have to polish the brass. Make sure it is clean but no more is really necessary. Tarnished brass shoots just as well as polished brass. I've even spoken to reloaders that say polishing thins the brass over just a few times. The best advice I can give a new loader is, get a good reloading manual and read it. Then read it again.
One thing also, keep accurate records. Label your loads when you put them in the plastic cases. I have a cork board over my bench. I enter all the loading data on file cards for each caliber and pin them on the board, as well as a notebook which I keep my records. Good video on .357 loading.
4 yrs later. Good instructional video. Living in Illinois 2020 during the pandemic and riots, not being able to find ammo, made me want to reload
This Covid thing......... Great to get into reloading better to have been doing it for some time.
Always check the case length. .357 does stretch after only a couple reloadings depending on the load. It can be very important to prevent high pressure to have the case the correct length.
Great advice!
That was very interesting. From a newbies point of view I'll be re-watching this over and over. Cheers
Thank you I'm glad it helps.
Getting into this rabbit hole of reloading. So far have a reloading bible on the way and watching tons of videos to get a good idea on where I want to start. I have been taking notes on equipment used, steps, and experience tips. Thank you sir for your well informative video and sharing your knowledge.
Good luck!
Thank you Big Ed for getting me started on my reloading journey. This is the video that got me going!
Enjoyed watching from the beginning to the end. I actually learned. About the crimping where the LED jumps out of the case when being fired never heard that before thank you
Went to my first gun show, and was informed of Lee's tooling and reloading. Looked for a video for reloading 357 Magnum loads for my D.E. and how-to steps, and you Sir...nailed this video with great comments and step by step processes you took and watched for. Great Job!! I think I could nail this process as a first time re-loader.
Glad I could help!
Probably the best reload 101 I have ever seen. Thank you.
Jăz Bold your welcome.
Great video and discussion. I am just starting to load 357 appreciate your input.
Nice explanation.
I just purchased an SP101 .357, 3incher, and as soon as I get all the components I will handload.
Thanks for being thorough and wasting no time.
Cool revolver! Thank you.
I love the .357 Mag round and the great thing about it, like other Pistol rounds when you fire it through a rifle instead of the your S&W 686 it changes the characteristics of the round.
Your probably good for 250+fps faster from a rifle. I love the idea and practice having rifles and revolvers in the same cartridge. Watch this video you will enjoy it.
th-cam.com/video/ZCpfFLLANr4/w-d-xo.html
Great video. And I like the way you explain what happening crimp isn’t applied correct. Made me understand it much better.
I've been using sunseed corn cob pet bed letter with nu finish works like a charm just loaded 40 45colts last night
From one Big ED to another....thanks for this. Very thorough and very well done.
I've been reloading ammo for around 15 years now to include.357 and I still watched the entire 33min and 30sec of your video lol great job. Right now all my reload stuff is in storage do to me moving these videos are the next best thing thank you
Good stuff I'm happy I could help.
I'm 73 and have been reloading for 50+ years. My first press was a Pacific single stage press. Then, I moved up to a Hornady auto-indexing progressive press and later got rid of it. The only times I've ever gotten a squib was on that progressive press. Now, I use a Dillon 550C and 'i have to spin the shell plate by hand. Haven't had a squib since I got the Dillon. I didn't like having to readjust the dies between reloading 38's and 357"s, so I've bought a second set of 38/357 dies. Now, I have 2 sets of 38/357 dies, one dedicated to 38's and the other dedicated to 357. I also use a beam balance to get my charge weight, but i shoot for just under my target weight, then i use a Powder Trickler to come up to exact weight.
Thank you for the comment, I only use the powder trickle for rifle rounds. I'd love to buy a 550 Dillon!
I have been loading the 357 Mag for 40 years.
My favorite loads"
125g HP from Rem, Win, Hornady
17.8g of IMR 4227, cci 550,
18.0g of H110, cci 550
both of these loads are in the 1800 fps area with 6" barrels
158g Lyman SWC with gas check
14-15g of AA2700
185-200g SWC from GT Bullets
Unique powder, 850 fps, unreal accuracy with both of these bullets
I killed half a dozen coyotes with my 6" GP 100 with the 125s when I lived in Az, but have owned many Rugers, S&W's in this caliber.
The GP 100 in some models allow you to swap out the front sight to a beaded sight and a V notch rear sight, which allows for a very fine hold. The 125g load with the 4227 is a good 100-yard load in a gun that has good sights and an improved trigger.
Great comments those are some barn burners!
Great video! Awesome explanation!! Thank you! Getting ready to load 357 myself. This video really helps start me on the track.
Glad I could help.
I would like to point out that different books state different max. loads so it is useful to study more than one book to determine your load especially if you are near minimum or maximum charge. As an example the Speer reloading manual shows a max. of 17.8 grains for a 158 grain bullet and shows a much slower muzzle velocity of 1330 fps from a pistol and 17.5 grains of H110 for the max. in the rifle and a muzzle velocity of 1866 fps.
My son gave me a Ruger GP100 in 357 for christmas. i went to buy ammo. Holy Crap. $53 bucks for 200 rds want to get into reloading, but know nothing about it. your video was a big helpin pointing me in the right direction, thank you.
$53 for 200 rounds of .357 Mag is cheap I bet its for 100 rounds. Don't forget to buy some .38 special.
@@biged7175 you're right,it was 100. even worse. :( .38 special will work?
@@ericdavenport2662 yes 38 specials can be shot out of a .357 all day great for learning or beginners.
@@biged7175 thanks for the info
Great Video, Thanks for taking the time to take the viewers through the process from start to finish. Especially explaining everting step by step. Found it very informative. Two thumb’s up.
Thanx Tom glad I could help.
This has been a tremendous help for me as someone new to reloading.
Glad it helped.
Nice video. I just got my self a GP100 this week and this guy at the range convinced me to start reloading for it.
I can't believe it's a dollar a round for you. My local cabelas has 50 158 grain rounds for $22 and some change.
I can buy 357 mag for $30 a box of 50 I reload most of my 357 now.
Only been reloading for about 4 months and .308 only, but I’m just about to start reloading .357 Magnum and this video is exactly what I was looking for. I have the same Lee die set you have, and was unsure about the case flaring, but now my questions have been answered and I feel I can get started with the 250 cases I have already prepped. Good video.
gapster46 Thank you, here's my 308 video
th-cam.com/video/Yhry9WGtKXg/w-d-xo.html
Nice intro to reloading. Very organized, which is crucial when dealing with ammo. Mistakes can break your toys, blow your fingers off, etc.
Thank you.
I have a Dillon 550C progressive press as well as a single stage press
Thanks for the video!
Man I’m new to reloading, so I never knew of a time when primers were $3.50 for 100 😂 I wish it was still like that.
Thanks for your time!
Your welcome.
Great reloading 101 video, I have just started thinking I want to reload a lot of the brass I have been saving and so far this has been the best how to video I have seen. You took us through the cleaning and saying what you used for that all the way to finished project with lots of great details on press use. Thank you very much for all the info, looking forward to checking out some of your other videos now.
+woodturningjohn Thank you, I will keep them coming.
Cool, just watched the G17 4 video and on the carrying with an empty chamber one at the moment.
+woodturningjohn Thank you feel free to Subscribe, I have a 44 Mag reloading video in the works.
Already did :) enjoying the stuff so far and ready to start collecting reloading supplies.
I'm just starting to reload 357 and have same press and dies as you. Perfect. Thank you.
Great video for a newbie. Thanks.
Thank you for making this video. I had no idea what was involved in reloading, this was a great education.
Your welcome Glad it helps.
I feel like I'm way, WAY too much of a casual shooter to get into reloading, seeing how much work it is and how expensive the tools are, maybe some other day when I live in a place that has the space for the press and such. Thank you for the detailed video about the process!
In the overall scheme of many years of active shooting, reloading is very cost effective. The equipment isn't that expensive, but it depends on what you buy. Most of my simple equipment is Lee and i've been using the same stuff for 25 years. it has paid for itself. It is still cheaper than buying factory ammo for all of your shooting. Now, if you hunt a couple times a year and maybe one or 2 range sessions a year with just a couple different guns maybe reloading isn't for you. It is a fun and relaxing hobby, at least for me. Some people make it seem much more complicated than it really is.
an amazing amount of knowledge transfer going on here. great video.
Thank you, I'll be cooking up a 10MM video soon.
Enjoyed the video I did notice you changed powder throw techniques a couple of times. I try to do everything the same way every time. Especially when throwing powder to maximum loads.
Good call, this video might have been made over two days.
Thanks for the great video.
I’m getting into reloading and this video is so very good, I have saved in my library as reference 👍👍👍
Thank you glad I could help, I've made a bunch of reloading videos.
Loading my .357's as well, and I'm using Titegroup. 👍
Thank you. Enjoyed and got some questions answered.
+Steven Holmes Excellent Glad it helped.
Very well done.
Thank you.
I started out thinking about saving money by reloading but now I shoot triple the ammo. Funny how that works. Good video.
Lol same thing kinda happened to me.
Good video my friend.
It is a good case for wet tumbling deprimed cases with steel media.
Thanks again.
You got it!
Big ED
Subscribed !
I will contribute to your topics as best I can.
I no doubt will have questions.
Thanks
And God bless.
tjmooremusic thank you.
tjmooremusic thank you, feel free to post any question or comment you please.
I know the video is old but I loaded some XTP Hornady 125 with 18.4 gr of H-110 straight out of the Hornady load data I have the lee book and the Lyman book as well but I use the Hornady book mostly. Good video though
I'm a big fan of reloading when I'm using multiple books!
Man you got a voice for radio .
Thank you.
Great info. Thanks!
This is probably the best reloading video i've watched. Nothing but information comes out of your mouth...no bs...great demo. I am using the same press and dies. I am also reloading the same bullet. I set up my dies last night only to find I don't have any small pistol primers. Can I use CCI small rifle primers? I am seeing mixed opinions and vague explanations on how it can be done. Thanks!
Subbed!
Thank you, I've never tried subbing rifle for pistol primers..... What kind of revolver you shooting them outta?
@@biged7175 Thanks for asking. GP100 7 shot stainless steel 357mag. I called the shop I normally purchase my powder and primers from...they want $200 for a 1000. Ridiculous. I called a friend who helped me get into reloading...he GAVE me 500 small pistol Magnum primers. I gave him 500 rounds of various bullets. He didn't want anything for the primers...but I told him he needed to be humble and accept just like I was for the primers.
@@brobdingnagianone900 Cool Ruger, I'm glad you got primer to keep yah going.
Great video! Love the Frampton live album in the background!
Good content - should definitely listen to yourself from time to time - the repetition of right here, right there and go ahead is grating.
Great video, really well done.
+Mishael Sands Thank you
Thanks for the information
Your welcome Rick.
Hi Big Ed! Beautiful video! Can I ask you a question about recharging even if it's been years since your video? With an average dose of powder for range shooting can I use standard primers or is it always better to use magnum in 357 caliber? Congratulations for your video! Explanation and perfect skill in reloading!!
For range use its fine to use regular primers.
2022 now running about 80 for standard remington box of 50
Frampton comes alive -- LOVE IT. great video bro.
Lol thank you.
This is a great class on reloading! My wife and I are debating getting into reloading .38sp and .357, and this video made me feel like we could do this. We watch about an hour to 90 minutes of shows a night, and I think this is something I could do while we do that. How long, from start to finish, do you think it takes to reload 100 rounds once you get it all dialed in?
Oops, you answered at the end. Again, great video! Thank you so much.
Once your dialed in 1:30 minutes on a single stage press much quicker on turret press.
Big ED thanks for the awesome video! Thank you for replying. This seems easy to do.
Nice video, thanks. I'm a precision long shooter/loader amatuer. You're loading hot and the powder dispenser tends to vary more than a little if you check it with a precision scale. I'm guessing your not worried about the variance of powder even though it's a hot load? It really saves time vs a precision scale so.... THoughts? Just bought a colt python.
Your very right and I agree 100% for handgun rounds 20-40 fps does not matter, bench resting and firing magnum revolver rounds hundreds of yards does not interest me. Watch my .308 reloading video I'm rocking a powder trickle for precise charges.
th-cam.com/video/Yhry9WGtKXg/w-d-xo.html
I like all your videos. some guns are just better than others. I do not know the other guys, just prefer the way you show me how !!!!!
+Carbon Copy Thank you Will keep'm coming
Great video, 2 thumbs up!
Thank you!
Hay cuz you need to get out of NY and come down to Texas
The packet your dies are in has "carbide sizing die" written above it. You DO NOT have to lube straight wall handgun cases with carbide dies. I have reloaded probably ten thousand rounds of .357 mags, .38 special, 327 & 32HR mags . Never lubed a single case or had one stuck. I' was using Lyman & Hornady carbide dies.
The following quote is a Lee product description of the four die carbide set like yours:
"Carbide dies do not require the cases to be lubricated prior to use like non-carbide dies."
yup. straight cases and carbide dies, no lube needed.
I know I'm just used to lubing everything.
They don't require lube, but holy hell does it make everything just run a whole lot smoother. Especially on a progressive reloading press.
Just post it on TH-cam and I'll watch it. A deagle in .357 should be fine even firing the wildest +P loads remember that same gun rocks 50 ae.
Good video with each step explained well. I'm a newbie loader using an RCBS trying to learn from the tube and books.
Good move, feel free to post questions I also have other video's uploaded.
I have already found that if you don't have the flare/decapping die adjusted correctly you get waaay too much flare and I'm going to assume a bunch of scrap brass if I can't rework them in the sizer. Thoughts? I have purchased a digital caliper (Harbor Freight $8.50 on sale) and am going to take another run at it.
Not sure I understand your question, my video should show this.
Thanks for the reply, yes the video does show that so it is less of a question than an "aw crap". I ran a bunch through before I saw your video and apparently overflared a bunch of cases while also decapping. Now I am resizing them to try to salvage some of them.
Always resize 357 mags, flare only minimum to seat bullet.
Great 101 video thanks for posting
Your welcome.
Good stuff Ed. Do you have a light power .357 some thing on par with 38special +p so I can avoid the ring cased by shooting regular 38 special.
I always load and buy hot 357 and shoot 38's for fun. The ring stuff is garbage just clean your gun. Be shooting both for years.
Thank You for the informative video. Take Care.
This is the best video about reloading 357 that I have found on TH-cam. You explained every step very well and made it very easy to follow, so thank you for that.
I just bought a S&W 686 plus 4" and shooting it does get $$$. I ordered a LEE single stage reloader kit along with the LEE dies. Where do you buy your primers, bullets, and powder from??
Once again, great video I'll watch your others for sure. Thanks again.
+Eric Babula Sometimes I buy components locally or if I have a few hundred $$$ I will order stuff online.
Great comprehensive tutorial video, I’ve hand cast some 158 gr swc I’ve also gas checked them would these heads be treated as almost the equivalent of the hornady heads you are using? I’m using alliant unique any guide for a safe hot load for these?
I would look at reloading manuals in never push cast bullets at max I save that for FMJ
very nice ED
+Carbon Copy Thank you
Great video with good information... Why do you lube your cases ? It caught me eye as most all die sets have a resizer die that does not require case lube on straight wall cases , inside the die is a carbide ring ... Around 1966 is when i first bought a resizer die that was carbide TI and i really like that idea of not having to use lube on my cases ..
This is one of my most frequently asked questions. I'm just in that habit of lubing everything I work in the marine biz, so everything gets lube, it can't hurt.
th-cam.com/video/MHzC6cLUlZc/w-d-xo.html
good job.
Thank you.
How much does it end up costing to get started with this? Does it take a long time before you start saving money (labor excluded ofc)?
Is there a general rule of thumb for how many times you can safely reload the dame case before it becomes risky or are there any signs that a case is too worn to reuse? Sorry about all the questions. Interesting video!
You will save money over time the larger the round the more you save. I would buy a reloading manuel and ready it. Your question about brass life is a good one but many possible awnser.
I've never used a hand primer that I've liked more than a priming arm on a press.
RCBS makes an excellent tool for inserting primers. It's more expensive than the Lee but well worth it IMHO. I prefer to hand prime because of the greater feel and control of that operation. Plus, I can sit and watch videos and bust out hundreds of cases doing it that way. To each his own though.
Good stuff.
Great video, can I please get the name of the press and dies you are using? would appreciate it lots, thanks
There all RCBS
Big Ed, you took the mystery out of reloading. Thank you and I'm sorry you have Coumo for a gov. I know, I'm a Jersey boy originaly.
Your welcome, glad my video helped!
Much appreciated, very well explained!
Thank You! I'm new to reloading, and I'm going to be reloading .357 magnum! I think this one of the best videos on .357 magnum! Did these loads work out? Have you fire them yet?
Yes there great, I've got a batch of +P that I need to test.
When trying to teach someone to reload the first step is for the student to get a good reloading book and read it. Then read it again.
I agree!
th-cam.com/video/AcIcgDnuEoo/w-d-xo.html
Did you use regular small pistol primers or small magnum primer?
Great Video Thanks man ! Frampton Comes Alive up on the wall...
Good eye that one's signed by Peter Frampton also.
Thank you for the video. Well made, pleasure to watch. I am reloading with the same powder and here is the question: I've got same weight projectile 158grains, but round nose one, should I use same charge of powder, or the type of bullet will make a difference in velocity? I appreciate your attention to this matter. Happy shooting!
The only thing that really matters is the weight of the bullet (grains) and if its lead or full metal jacket. If there FMJ 158's than load the, with the same charge, what revolver are you using?
Thank you for quick reply. I use S&W 65-3 K frame 4' barrel revolver. Bullets .357 round nose #57945 "Berry's" superior plated bullets.
Those plated bullets are a gimmick, they are just lead bullets made to look like FMJ for a rule of thumb I would subtract 10% from max loads for lead bullets or look up a load for lead 158's. Also your K frame will like those better, I run mine from an L frame 686.
Thank you, Big ED, I will load those as lead bullets. Have you tried 110 grains xtp with H110 powder?
I don't really see the need to load 110's I load alot of 125's JHP there the gold standard for .357 mags.
THANK YOU !!!
Awesome! Great video
+Elias Aguilar Thank you
I'm thinking about starting to reload for my Marlin rifle in .357. Is there any other information specific to reloading 357 for rifles that might be worth noting?
ED: I have a question. First, I enjoyed your video. I have been hand-loading since the mid 1960's I load 38/357, 380 auto, 9mm, 38 super, .40 S&W, 45 acp, 45 long colt.and 44 spl. I have the same LEE die set you have. I have Carbide sizing dies for all my straight wall cases including 30 carbine and I have never put any lube on a case during my re-sizing operation while using the carbide sizing die. Is this just an extra step you take. I use the lube on any rifle cases with a shoulder and one wildcat case that I make necking a .45 ACP case to 9MM. Keep up the good work.
Put it this way a little lube can't hurt with metal on metal.
I think it is a step that slows you down and is a messy step. Especially with carbide dies. Should not have a problem with shells sticking with these straight wall cases like this. It is not necessary at all.
@@ResistTheNonsense it can't hurt it's a dry lube that costs 5 cents and takes 5 seconds.
Quality information, thank you very much!
I do have one set of questions remaining: If you'd have to trim the rounds, at what point would you do so ? Right after cleaning them ?
And do you trim them to the exact length the book tells you to? Does the resizing step affect that length at all ?
+Frederik Claeyssens Most handgun cases with straight walls will not need trimming. Watch this video I made it might help.
th-cam.com/video/mFjS_My9PMU/w-d-xo.html&spfreload=10
Great video man...i wanna get into reloading!!
Thank you it's fun and will save you $$
Is the factory crimp die really necessary with 357 magnum?
DrunkMouse2030 magnum revolver rounds need heavy roll crimps, no joke.
Yes that is a must. If you skip the crimp you'll have binding issues due to bullets moving what is referred to jumping the crimp
Thanks. This was a great informative video. Question: Can you extract the old primer and then put the cases in the tumbler to clean out the primer well?
+Lou Park Tumblers won't really clean out primer pockets, you need liquid sonic cleaners to accomplish that.
My experience with that is you get media (walnut shells) lodged in the pocket. It's annoying to have to pick it out.
I agree, I clean then resize/deprime
Great video but I too have some questions. I will be reloading for a 16" .357 Henry Rifle. I know I will need a slower burning powder to get the velocities I want in the longer barrel, so could you recommend a powder and a bullet weight for self defense?
+Lee Greger For the henry I would just load H110 max loads your splitting hairs after that. 357 for self defense just buy Hornady 125's XTP JHP there one of the gold standards for self defense.
Thanks!
H110 or W296 are the same powder, and it's a true "magnum pistol" powder which will give you the velocities you need. I also use Hornady 125 gr XTP bullets and they work really nice out of my Henry Big Boy. (and out of my revolver, too, but with more fireball)
Joe Zasada
Thank you.
I would follow my lead and run my loads, they work great from a 6" revolver and will be faster out of a 16 rifle. Use hornady xtp bullets and Hogdon H110 powder
I was under the impression that with carbide dies, you don't need to lube the cases.
I have loaded and hunted with the .357 for many years. I use both handguns and rifles. I have harvested many deer and 3 elk with my .357. I use slower burning powders such as 2400 or Blue Dot so I can load hot and not explode my handguns if I should mix up the loads. From my 2 inch revolver there is a lot of flame if I use the rifle charges but the firearm is just fine it's just a waste of powder.
great video, thumbs up!
Thank you, love reloading big revolver rounds.
This is a great vid! I've been wanting to start reloading. You made it easy to understand. I have a 686+ (4 in). It's expensive to run a couple hundred rounds every other week at the range. My question, how cheap can I make warm loaded 357 just for plinking? That's kind of my biggest concern is how much I'll save compared to 20 bucks a box of 50 at wally world.
The big cost of reloading is the projectile second is primers, you should be able to get 100 .357 bullets for $20 which means you could load 50 rounds for $13-$15 dollars.
Big ED thanks!
@@biged7175 what primers and bullets do you recommend for the budget practice reloads. 50 rounds at 26 $ at Walmart at the moment :(
@@TrueMesa CCI, Remington or Winchester primers shoot lead bullets and you will save money. Over FMJ's
@@biged7175 can lead bullets be purchased?
Late to the party, but such a good video. Subscribed.
Thank you!
Great video, thanks for posting. Im curious, depending on charge and type of cases, what's a typcial lifespan of the brass? Can you re-use more than twice?
+Scott S I have some 9mm that I have loaded 6-7 times and it's still fine. I would keep loading 357's untill the case cracks or primer pockets are to loose.
+Big ED thanks for the prompt reply and information. That makes the overall cost per round much less if I don't have to buy new brass each time. I'm just researching reloading now to gain a better understanding. Don't have a smith though, just got a Alfa proj 357 6" barrel
+Big ED what type of brass do you recommend ?
+Scott S I would go on gun broker and buy starline, but most common 357 brass works just fine since its strong to begin with.
Will do. I'm up in Canada so I'm unsure if they ship up to us, but I appreciate the info again, Cheers!
A good trip for the cleaning media in the shell tumbler. Go to a pet store and buy crushed walnut shells. It's used as a bedding material for lizards and it works great. Was way cheaper too.
Great videos from a fellow upstate in the communist republic of NY!
Lol Thank you.
This was really helpful I subscribed thanks buddy
Thank you.
thank you sir !
Do you only have to debur old or used casings? I see that you didn't here.
Cases only need to be deburred if there trimmed.
@@biged7175 is there a way to check how tight to crimp? And what is probably the most common mistake to have a bad reload?
@@ClearWater7.62 Read/buy a reloading manual first, watch my video's more carefully there are a bunch of them uploaded. For me squib loads and mashing the case pushing in a projectile.
@@biged7175 thanks
The worst part of reloading is case prep. Once case prep is done loading it is easy. I always have to say to beginners you don't have to polish the brass. Make sure it is clean but no more is really necessary. Tarnished brass shoots just as well as polished brass. I've even spoken to reloaders that say polishing thins the brass over just a few times. The best advice I can give a new loader is, get a good reloading manual and read it. Then read it again.
I agree 100% Take a look at this video i made.
th-cam.com/video/AcIcgDnuEoo/w-d-xo.html
One thing also, keep accurate records. Label your loads when you put them in the plastic cases. I have a cork board over my bench. I enter all the loading data on file cards for each caliber and pin them on the board, as well as a notebook which I keep my records. Good video on .357 loading.
I do Cheeky, every case filled with reloads is labeled also I have a book with all my batches it usually explained at the end of each video.
@@biged7175 that is a very good practice!
with your Lee carbide die, why do you still lube your cases?