The box on this video is better design than the one showing on your website, this one has terminals vertical rather than side by side which makes it easy to use a copper busbar to connect several boxes stacked together. Are you calling this one the Version 2?
Napkin Math: $350 for kit + batteries. Can source EVE MB31 314 Ah for $75 each random internet quote, so 75*16 = $1,200. That's $1,550 for a 15-16 kWh, 48V battery. Assuming SZH will beat batter price, so consider $1,550 ceiling. Everything plus shipping. Compared to EG4 LifePower4 V2 at $1,200 (plus shipping) for 5 kWh, so $3,600 for 3 to get 15 kWh. Thus, approx $2,000 savings for DIY w/this kit. I don't see fans, so passively cooled vs actively cooled. Maybe room to add fans in that empty space being filled w/foam? Starmax might want to reconsider that "stackable up to 15 high" bit on the website. Heat rises. Plus structural. That'd be 1,620 kg or 3,500 lbs in a stack!
That is one of the best battery designs I have seen. Do you ship to Brazil? If so please advise how you import them and the cost associated? I would really like to be able to build these to sell here. Are you happy to send me some samples?
Nice, it's better You sell Already Made Project like this for Beginner. Some may prefer to build there's from scratch While some are willing to but afraid 😅
Bruh, you mean this size, or smaller size but same design ? If you want 25.1v just parralel 2 cells each. You can even do 12v this way, only then parralel 4 cells.
she has a cheerful face. How much would it cost for a sample? dpp to florida. May i have a manaul or spec sheet for the battery components thanks. Do you also sell a inverter to match it?
Very Dangerous, no real protection, accidentally dropping a spanner against the frame might create a short thus causing an explosion. Yes that much current through a small spanner can make it vaporise in a blast. The only attempt at safety I saw was to wrap the driver in electrical tape. nowhere near sufficient.
Hello, why the ALM red Led is always ON ? (12:12 min) ...... Is it normal ? Thank you !!
Observing very carefully, this is because the Password not changed
Very Nice vidéo
The box on this video is better design than the one showing on your website, this one has terminals vertical rather than side by side which makes it easy to use a copper busbar to connect several boxes stacked together. Are you calling this one the Version 2?
thank you for comments, we will revise the picture on the website. Yes, it is upgrade version, canbe called as version 2))
Save $2,000 means nothing at all. Please include prices.
There have price on the website, but if you sent inquiry, there will have discount now!
Dear , what is the purpose to use Eva Foam between cells please
1. Make isolation
2. The case space a little bigger, use EVA to fullfill the empty case
Do you train people to learn manufacturing of lithium batteries?
good job 💪👍
Napkin Math: $350 for kit + batteries. Can source EVE MB31 314 Ah for $75 each random internet quote, so 75*16 = $1,200. That's $1,550 for a 15-16 kWh, 48V battery. Assuming SZH will beat batter price, so consider $1,550 ceiling. Everything plus shipping. Compared to EG4 LifePower4 V2 at $1,200 (plus shipping) for 5 kWh, so $3,600 for 3 to get 15 kWh. Thus, approx $2,000 savings for DIY w/this kit.
I don't see fans, so passively cooled vs actively cooled. Maybe room to add fans in that empty space being filled w/foam? Starmax might want to reconsider that "stackable up to 15 high" bit on the website. Heat rises. Plus structural. That'd be 1,620 kg or 3,500 lbs in a stack!
Very Nice...👍👍👍
That is one of the best battery designs I have seen. Do you ship to Brazil? If so please advise how you import them and the cost associated? I would really like to be able to build these to sell here. Are you happy to send me some samples?
How much compression
price
Nice, it's better You sell Already Made Project like this for Beginner.
Some may prefer to build there's from scratch While some are willing to but afraid 😅
Yes, we also sell the ready pack for customer)
@starmaxenergy Do 8KW Inverter and 20KW Project with Gotion Cell so that it will be portable
Give us a total price and kit. Don't want to have to give all my info out just for a quote
Can It be put vertical?
there have vertical type, next video will assemble vertical pack)
Total cost?
I wish there were 12.8 v and 25.1 versions of this
Bruh, you mean this size, or smaller size but same design ?
If you want 25.1v just parralel 2 cells each.
You can even do 12v this way, only then parralel 4 cells.
Friend, it can be in that way. the 25.6v 280ah DIY box already in our factory, following video will show it soon )
@@starmaxenergy ok Great
@@edwinbruckner4752 i.meant for a 24v system
she has a cheerful face.
How much would it cost for a sample? dpp to florida.
May i have a manaul or spec sheet for the battery components thanks.
Do you also sell a inverter to match it?
Thank you friend. Yes, we have inverter. Next video will show how to connect the battery to 6000w inverter)
❤❤
👍👍👍❤
Hallo 👍
💑💕💑💕💓🌷🌷🌷🌼🌼
Very Dangerous, no real protection, accidentally dropping a spanner against the frame might create a short thus causing an explosion. Yes that much current through a small spanner can make it vaporise in a blast. The only attempt at safety I saw was to wrap the driver in electrical tape. nowhere near sufficient.
Total cost?