Installing a Slotinvasion Guide on the NSR Porsche 908/03!
ฝัง
- เผยแพร่เมื่อ 22 ก.ค. 2024
- I am still tuning the NSR Porsche 908/03 and this week I added the Slotinvasion guide! Here is a step by step instruction on the install. Then we throw it on the track and see if we can set a track record.
#slotcarracing #slotcars #NSRPorsche #slotinvasion
www.buymeacoffee.com/twolines... - บันเทิง
G day Marty, the new guide was big improvement great review regards rhys
Yes, Eventually all of my cars will have them. Thanks Rhys!
Awesome instructions. Love the thicker SlotInvasion guides. Any tips on prepping new braid for beginners?
A tip: often on the guide, there is a slight flashing that sticks up from the horizontal base that can cause rubbing and rough turning. I often take a hobby knife or jewelers file and smooth those out. A 0.010" space also helps to make a smooth rotation (with a drop of oil) and pushed that guide into the slot ever so slightly.
But you got that baby humming on track!
Thanks Joseph! It is one of my favorite cars. So much fun to drive. Great tips!
The ferrules on the NSR leads would have fitted straight into the Slotinvasion guide, negating the need to solder the leads to the braids. Would also make changing the braids a lot easier.
Thanks Mark!
Way to go, Marty :) We can see just how fast and stable the car is in motion. All I would add is to make sure you have good quality, heat resistant grease on the moving parts.
Thanks to Slot Car Corner, I have grease! Thanks Darren!
Love your track mate!! Such a fast and suler quiet Carrera track. One thing i get annoyed by carrera track, and scalextric digital for that matter, is how noisy they are.
Seems you have felt underneath.....works wonders.
I went with low pile carpet. Really helps with noise. I hate noisy cars and track 😂 thanks!
Hey Marty- great video! - I agree, I been slowly changing my fleet of cars over to SlotInvasion guides, and with similar results.
Clint, I have changed out all of my favorite cars. The slotinvasion guide really is a top performance modification.
Hola 👋 MARTY buen video me gusto mucho te felicito costrui un porschevigual con molde de yeso y con una vacuformera lo realice y me quedo vastante bien hice lo mismo con un LOLA 280 COSWORT ese si realice el video para que veas como lo hago graciascamigo espero que lo veas en mis canales un saludo de Argentina 😉 AMIGO MARTY ABRAZO 🤗
Hola mi amigo. Gracias por el comentario. Voy a ver tu video!
Gracias 👌🙂 MARTY hice el Lola 280 que corrio en mi país en 1972 estuve presente en aquel momento tenía 14 años eran los 1000km de buenos aires sport fue una experiencia que nunca olvide al ygual que lade los 70y 71 estuve en todas esas ediciones lastima la del 73 que no se realizaron por el gp de f1 y gano Matra por 9 puntos el campeonato a Ferrari hubiera sido apasionante se mucho de la historia del automovilismo por eso me apasiona el slot es mi vida y la historia también yo explico mucho en el canal historia y pasión gracias 🙂 MARTY POR CONOSERNOS UN SALUDO AMIGO
Mis últimos videos son de la Ferrari 312 pb que debutó en Argentina en los 1000km de buenos aires 1971 y tuvo un accidente lo cuento en mi video estuve a 50 mt del accidente y cobtrui todas los modelos de 312 asta la última 312 que no partisipo para mi es un honor costruir tanta historia y mostrarla las costrui todas en cartón explico como hacerlas creo que te gustará
Great video Marty, if you can do the same with other cars and repeat the results that's science 😀 My next question would be how much weight can you take out of it by shortening all those wires (bet it's a few grams) and will that help the lap time further? Inertia and all that :) and if it increases instead of reduces lap time can you add the equivalent weight back in in different places and tune the handling that way? So much more science to be done here! Keep it up (but from one sound engineer to another, bring back the condenser mic with the pop shield )😁
Thanks so much! I was in a hurry and used my iPhone to record everything. Don't worry, I have not abandoned my setup. LOL. Yes, I need to shorten the wires, balance out the car with some lead, adjust the front tire ride height. I think I can get another .200 off the time. This car is fast and so much fun to drive. Thanks for the great comment and advice.
That NSR was whipping down and around that track. Love those long straights wonder how long your table is? Gonna go back and watch and old vid to find out.
It handles so well.. and is fast. My table is 8' x 20' and I have a few layout changes coming that will go to 24' long..
@@twolinesslotcars nice 👍 that’s one more 4x8 more than I’ve got. Gonna maybe look under the couch cushions and find some bucks to go pick up some lumber. I can hear my cars wanting just a bit more straight maybe I just have to bite the bullet and just do it.
@@heatmonster420 I like the fact that the cars can hit pretty close to top speed down the front stretch.. it is fun :)
Can you or have you done a video on controllers with finger control vs thumb control
I have not done a video about them but I could. I will add it to my list. Thanks Richard!
You don't have to solder the lead wires to the braid ... just use a grub screw .. much easier and holds just as well .. also makes it much easier to change out your braid ...
Thanks Chris. I didn’t have any grubb screws. I plan to change them out once I have them.
@@twolinesslotcars What size grub screws? I just got done updating my new NSR last night, I thought I did a pretty solid job but it doesnt even come close to my Slot.it cars in lap times, about 2 seconds off the pace. Going to post a vid later today, I still have the factory magnets in all of my cars, but I like fast at this point, I had a neo magnet in one of the slot it cars and it changed the way you drive to much. with just the factory magnet, you can still do a lot of drifting and a more natural feel to the car.
@@DogtownSlots something like this.. M2..
slotcarcorner.com/collections/1-32-set-screws/products/m22510-scc-m2-x-2-5mm-set-screws-black-anodized#