I am a clinical laboratory/phlebotomist student. This was part of an assignment. You had good details to remember while preparing, using and cleaning the device. Thank you. It was beneficial.
Nice explanation ..thanks However, we can not calibrate ours.. the device software we r working on ,has 2 problems: 1-it dosn't allow the sucktion pin out whenever selecting =) quality control (whuch includes the hi -low-normal modes) calibration ..and thus all the values shows 0.. 2- at the main menu when pressing=) calibrate now :it also doesnt push out the sucktion pin ..it just make make some kind of inside calibration or cleaning ..
1: you will have to contact the company on this. 2: the calibration does not require external samples. It uses fluids from the pack. So it sounds like it is doing this properly.
It is highly variable. Running tests does decrease the amount of solution in the pack, but the machine also uses the solution when sitting idle. We probably do 300-400 samples per year and we have had to replace the 800ml packs 2-3 times per year. The company can give you a more definite answer though.
I am a clinical laboratory/phlebotomist student. This was part of an assignment. You had good details to remember while preparing, using and cleaning the device. Thank you. It was beneficial.
I'm glad it was helpful. Please share with others!
Must be analyser be kept on all the time even when not in use? Can I unplug it when am not using it? Thanks
I believe it must be kept in and maintained even when not using it for extended periods.
What liquid should we fill in that FILL LINE ?? can we fill with distilled water or is there a prescribed liquid for it?
The company sells a liquid for that purpose.
Company produced filling soln.
There are a proper Líquid....I can send you a picture...
can u tell conventional method
Nice explanation...can you do video on troubleshooting
When i Run calibrate and say Na,CL and K is low what it's mean and what can I do?
It's hard to say. These machines can be finicky. Your best bet is to consult the troubleshooting section of the manual or contact the company. Sorry.
I am a medical technology student
And I have to praticals on determination of electrolyte levels I don't know what to do
what to do if the machine release result like this.
like the potassium result is *****
and the Na *****
It sounds like you are having electrode issues. You'll need to use your manual or call the company to fix it.
Any solution?
How to slove the error (fluid path!) ?
Sorry. You need to check the troubleshooting section of the manual for that.
The device we have is second hand and i am not sure if the device software is changed or modified
please have a device like this and is giving the message "error1" what should I do? can you help me.
I'm not sure but the back of the manual has a list of codes and what they mean. Sorry I couldn't help more.
I don't have the manual...
Perhaps contract the company to obtain a PDF version.
How clean electrode potassium
Sorry but I don't know remember. You will need to check the manual.
easylyte plus : result Na =135 , CL= 102 , but k = *** ? please how to fix this issue?
Perhaps a bad potassium electrode. Contact the company for help.
please show me the way electrical power circut don,t work how to replace it or can repair it
Sorry. I don't know. Hopefully someone else can help.
i hav some error in run easylyte analyzer can you help me
It can be a difficult machine to get running correctly. I'm currently having issues too. Your best bet is to contact the company.
It was very useful thank U
You are welcome.
Its very nice explanation, thanks. I wanna ask are there some similar videos about elektrode exchanges and pack usage ?
Sorry but the only other video I've made with this device is how to analyze a urine sample.
why the comes calibration error 6
I'm not sure. The manual has a trouble shooting section though. Try looking there.
Reagent pack RFID read error.That is called Error 6
nice
Thanks
Thank you.
Nice explanation ..thanks
However, we can not calibrate ours..
the device software we r working on ,has 2 problems:
1-it dosn't allow the sucktion pin out whenever selecting =) quality control (whuch includes the hi -low-normal modes) calibration ..and thus all the values shows 0..
2- at the main menu when pressing=) calibrate now :it also doesnt push out the sucktion pin ..it just make make some kind of inside calibration or cleaning ..
1: you will have to contact the company on this.
2: the calibration does not require external samples. It uses fluids from the pack. So it sounds like it is doing this properly.
potassium show nhi ho raha h
Hi, how many patients can be used for a 400ml reactive pack. thank's
It is highly variable. Running tests does decrease the amount of solution in the pack, but the machine also uses the solution when sitting idle. We probably do 300-400 samples per year and we have had to replace the 800ml packs 2-3 times per year. The company can give you a more definite answer though.
Bataye kya kare
How to avoid error 5 massge?
I'm not sure. You would have to check the trouble shooting section of the manual for that. Sorry.
Error 5 means theres something wrong with the solution pack installed.
good