I use a telescoping paddle. That bar like the Explorer has though is handy. I so wish Yamaha would copy that platform, then make one that isn't absurdly priced.
Thanks brother. And congratulations on being my first Denmark comment. Keep watching and subscribe especially if you’ve got a Fishpro. Lots of good information on my channel to help make your fishing experiences much more successful and enjoyable.
My Minn Kota is an ulterra riptide salt water version. 54 inch shaft 80 pound thrust which is more than plenty strong enough. I use a 24 V lithium battery(only 25pounds).
Hello there I’m all the way over the other side of the world in Australia 🇦🇺 I have a Fishpro Trophy and am looking to fabricate my own mount and like what you have done, if I email you could you please send me some details as well
Yes I will be selling them soon. I’m still working out manufacturing and shipping. I’m doing my best to lower the cost to the consumer. This went from an idea in my head in March. To being patented, built, tested and redesigned over the summer. Now I’m moving from fabrication to mass manufacturing. All of this takes time. Please subscribe to my channel and follow for updates. Also email me and I can send you more information. I use this to talk directly to any potential customers. My email address is…. oneoffoutdoors@gmail.com Thanks for your interest and questions and keep living live one-off!!!
I currently have no design for that model of Jetski. Right now my only working design is on the Sea-Doo fish pro. There are a long list of reasons, but basically it comes down to these. Seadoo‘s platform for the ski is more conducive to fishing from than any model out there. It has to do with the placement of their steering column and storage compartment being very near the rider. Also, it has a long flat nose. This creates a very level and balanced surface for the extra weight that is placed on the nose of the ski. Additionally, it has built-in cleats below the riders hands, which serve as excellent anchor points. It also has very deep foot wells and an extended rear deck platform that makes the Fishpro very buoyant and almost impossible to tip over. Add to that all of the fishing equipment that is already stock on that model, well it saves the owner quite a bit of money and time in building the perfect fishing vessel for himself. I hope all of this makes sense. I’ll be putting out some videos in the spring highlighting the points I pointed out, as well as many others as to why the Fishpro is just a far superior fishing vessel. Now if you want to get into engine, mechanics, durability, and things like that well, yes Kawasaki and Yamaha take the lead in those areas. Thanks again for your interest. Keep me in mind if you ever switch over to a Fishpro to serve as your fishing vessel.
Everything you need to know about my latest battery setup can be seen in this video. It also covers my double live well setup. th-cam.com/video/KyYBdVI8ir8/w-d-xo.htmlsi=wLH68ep80SpfhAxX
Why not just use the already attached bow rope? No need for $2K worth of trolling motor just to have something to pull on. If I were that concerned about shallow water debris I would sooner invest in a collapsible kayak paddle no more than it's going to be needed. If you need a trolling motor for your particular fishing, then that is another matter.
Thanks for your comments. This is just showing one particular circumstance in which the trolling motor can be used in many other ways than other than fishing. The JetSki allows you to get from point A to point B much faster than a kayak. At 50 miles an hour you can get to where you’re going and start fishing ASAP. If you’re launching your JetSki by yourself, you can also use the trolling motor to spot lock and hold a position off to the side of the boat ramp while you go and park your vehicle. Most of the freshwater boat ramps don’t have docks close by that you can just tie to. So this is a big help. Then of course, there are the obvious benefits of a trolling motor when it comes to many styles of fishing.
I use a collapsing boat hook. Its 4 to 8 ft telescoping. I keep it in a rod holder or foot well with floats on either end so I wont lose it. The idea of a troll motor is awesome but its too expensive for me. I use my bass boat for serious fishing, its much more comfortable. JMHO
Contact me through my email and I can send you some information on ordering and when they may become available. This email will place you in line so when they become available I can contact you to see if you are still interested in purchasing. Be sure and subscribe so you can get any updates as they become available. Thanks for your interest.
Contact me through my email address at oneoffoutdoors@gmail.com This will give me a way to contact you when they will be ready to purchase. I’ll respond to your email with a standard response that I send out. This will explain in detail where I am at in the manufacturing and delivery process. Thanks for your interest and make sure to subscribe to my channel for updates and helpful videos that will help improve your Fishpro experience.
Yes it comes naturally for me. I taught school for 32 years. Many of those years in physical science. So my brain always sees things through that spectrum. This contributed heavily to the concept and engineering of this mounting system. It is also what causes me to be in a constant state of modification and problem solving. So this one-off ideology has been with me forever. Thanks for your comments and subscribe so you can see all the other helpful design concepts coming soon.
![[HIGHLIGHT] หมีLIVEปะ? | EP.177 อำกันขนาดนี้ เชื่อแล้วว่าสนิทกันจริง](http://i.ytimg.com/vi/7eKtElnhI3Q/mqdefault.jpg)
I use a telescoping paddle. That bar like the Explorer has though is handy. I so wish Yamaha would copy that platform, then make one that isn't absurdly priced.
Great job.. 👍Greetings from Denmark.
Thanks brother. And congratulations on being my first Denmark comment. Keep watching and subscribe especially if you’ve got a Fishpro. Lots of good information on my channel to help make your fishing experiences much more successful and enjoyable.
Just got my fish pro. When we going fishing
What city and state are you in??
@@One-offOutdoors Pensacola Fl
We will be in Destin next summer. Catching sharks on the Fishpro the first 3 weeks of June
What shaft length do you recommend for the trolling motor and what size battery is recommended
My Minn Kota is an ulterra riptide salt water version. 54 inch shaft 80 pound thrust which is more than plenty strong enough. I use a 24 V lithium battery(only 25pounds).
Same for fresh water?
If you fish freshwater, you will not need the salt water version of the Minn Kota. The freshwater is less expensive. And much lighter in weight.
Nice rig Sir.... What material do you make these out of?
If you will email me, I will forward all that information to you. Go to….
oneoffoutdoors@gmail.com
Hello there
I’m all the way over the other side of the world in Australia 🇦🇺
I have a Fishpro Trophy and am looking to fabricate my own mount and like what you have done, if I email you could you please send me some details as well
Or better yet are you fabricating and selling them? If so what is the cost and can you organize freight to Sydney Australia
Yes I will be selling them soon. I’m still working out manufacturing and shipping. I’m doing my best to lower the cost to the consumer. This went from an idea in my head in March. To being patented, built, tested and redesigned over the summer. Now I’m moving from fabrication to mass manufacturing. All of this takes time. Please subscribe to my channel and follow for updates. Also email me and I can send you more information. I use this to talk directly to any potential customers. My email address is….
oneoffoutdoors@gmail.com
Thanks for your interest and questions and keep living live one-off!!!
Do you make this troll motor mount for a 2021 Yamaha fx svho limited?
I currently have no design for that model of Jetski. Right now my only working design is on the Sea-Doo fish pro. There are a long list of reasons, but basically it comes down to these.
Seadoo‘s platform for the ski is more conducive to fishing from than any model out there. It has to do with the placement of their steering column and storage compartment being very near the rider.
Also, it has a long flat nose. This creates a very level and balanced surface for the extra weight that is placed on the nose of the ski. Additionally, it has built-in cleats below the riders hands, which serve as excellent anchor points.
It also has very deep foot wells and an extended rear deck platform that makes the Fishpro very buoyant and almost impossible to tip over.
Add to that all of the fishing equipment that is already stock on that model, well it saves the owner quite a bit of money and time in building the perfect fishing vessel for himself.
I hope all of this makes sense. I’ll be putting out some videos in the spring highlighting the points I pointed out, as well as many others as to why the Fishpro is just a far superior fishing vessel.
Now if you want to get into engine, mechanics, durability, and things like that well, yes Kawasaki and Yamaha take the lead in those areas.
Thanks again for your interest. Keep me in mind if you ever switch over to a Fishpro to serve as your fishing vessel.
Well done 👌
Thanks 😁
will you post to Australia ?
I’m planning on it. When I get to the point where I can calculate shipping cost I’ll definitely be posting a video over shipping estimations.
What about the battery
Everything you need to know about my latest battery setup can be seen in this video. It also covers my double live well setup.
th-cam.com/video/KyYBdVI8ir8/w-d-xo.htmlsi=wLH68ep80SpfhAxX
Why not just use the already attached bow rope? No need for $2K worth of trolling motor just to have something to pull on. If I were that concerned about shallow water debris I would sooner invest in a collapsible kayak paddle no more than it's going to be needed. If you need a trolling motor for your particular fishing, then that is another matter.
Thanks for your comments. This is just showing one particular circumstance in which the trolling motor can be used in many other ways than other than fishing. The JetSki allows you to get from point A to point B much faster than a kayak. At 50 miles an hour you can get to where you’re going and start fishing ASAP. If you’re launching your JetSki by yourself, you can also use the trolling motor to spot lock and hold a position off to the side of the boat ramp while you go and park your vehicle. Most of the freshwater boat ramps don’t have docks close by that you can just tie to. So this is a big help. Then of course, there are the obvious benefits of a trolling motor when it comes to many styles of fishing.
I use a collapsing boat hook. Its 4 to 8 ft telescoping. I keep it in a rod holder or foot well with floats on either end so I wont lose it. The idea of a troll motor is awesome but its too expensive for me. I use my bass boat for serious fishing, its much more comfortable. JMHO
I need this for my trophy
Contact me through my email and I can send you some information on ordering and when they may become available. This email will place you in line so when they become available I can contact you to see if you are still interested in purchasing. Be sure and subscribe so you can get any updates as they become available. Thanks for your interest.
@@One-offOutdoors what's your email
oneoffoutdoors@gmail.com
Can I buy one
Contact me through my email address at
oneoffoutdoors@gmail.com
This will give me a way to contact you when they will be ready to purchase. I’ll respond to your email with a standard response that I send out. This will explain in detail where I am at in the manufacturing and delivery process. Thanks for your interest and make sure to subscribe to my channel for updates and helpful videos that will help improve your Fishpro experience.
Teach us 😁😁😁😁😁😁😁😁😁
Yes it comes naturally for me. I taught school for 32 years. Many of those years in physical science. So my brain always sees things through that spectrum. This contributed heavily to the concept and engineering of this mounting system. It is also what causes me to be in a constant state of modification and problem solving. So this one-off ideology has been with me forever. Thanks for your comments and subscribe so you can see all the other helpful design concepts coming soon.