Very nicely done. I do facilities maintenance and create content for my own channel, and really appreciate the way you put this together. Clear and concise. Thanks!
BTW - RTFM using the correct wiring available would have prevented (re)-run yet another wire from the control panel, at minimum utilize what's already available.
Thank you so much for the video and including the wiring. How are you liking the heater after some use? What size fuse did you use at the junction box? Im converting a cargo trailer and will be installing this. It will have a dedicated line so I'm hoping now power issues. Thanks so much again!!
I liked your idea of using the metal flex hose for your water lines but saw it wouldn't fully seat because of the turn knobs. Would you not have been able to shave down the plastic turn knobs so the metal fitting would seat down? Wondering because I'll be installing my tankless tomorrow. Appreciate you taking video of your install. PS does your pressure relief valve swivel at all? If I grab the white tubing and move it left or right the valve itself swivels with it. I would think it should hold tight but mine doesn't. Just wondering.
Probably could shave down the fittings, vice grips and a oscillating saw. My pressure relief valve does not swivel Glad this video helped, let us know how it goes 👍
@@frugalmcdogal8779 i forget, but doesn’t need to be very thick, not much amps running through it. Just at least match the size coming off the Fogatti.
Running the wire to the panel was the fix, the 12v power wire that ran through the IN-Command system didn’t want ti send power to that line so I bypassed directly to the panel.
Appreciate the video. I much prefer when things don't go perfectly in these videos, lot more value and realistically how it would go for many people.
@@DeepDoseMusic we try to keep it real 👍
Very nicely done. I do facilities maintenance and create content for my own channel, and really appreciate the way you put this together. Clear and concise. Thanks!
Thank you, filming everything makes it take twice as long, just hope it helps someone out there 👍.
BTW - RTFM using the correct wiring available would have prevented (re)-run yet another wire from the control panel, at minimum utilize what's already available.
@@abbiebeast In-Command wouldn’t allow it
Thank you so much for the video and including the wiring. How are you liking the heater after some use? What size fuse did you use at the junction box? Im converting a cargo trailer and will be installing this. It will have a dedicated line so I'm hoping now power issues. Thanks so much again!!
Welcome aboard, 15a and heres a link to the review video th-cam.com/video/qpKyO3ACOXU/w-d-xo.htmlsi=3CIjDfhGWPyIhfwI
I liked your idea of using the metal flex hose for your water lines but saw it wouldn't fully seat because of the turn knobs. Would you not have been able to shave down the plastic turn knobs so the metal fitting would seat down? Wondering because I'll be installing my tankless tomorrow.
Appreciate you taking video of your install.
PS does your pressure relief valve swivel at all? If I grab the white tubing and move it left or right the valve itself swivels with it. I would think it should hold tight but mine doesn't. Just wondering.
Probably could shave down the fittings, vice grips and a oscillating saw.
My pressure relief valve does not swivel
Glad this video helped, let us know how it goes 👍
Thought you needed to install pressure relief valve
@@tonywalls3473 nope, not on this one, i think the smaller one you have too. This one has one already.
You need a better bit for that drill!! I keep hearing the stripping of screws!! Haha. Looking to put one in for the same reason as you……wife!!!
@@Redneckf350 nope, no screws stripped, its and impact, not a drill
Good video!
Do you have a link or better description of the hose extenders ?
Would really appreciate it
They didn’t work so I didn’t add a link.
What size wire did you use to extend the controller wire?
@@frugalmcdogal8779 i forget, but doesn’t need to be very thick, not much amps running through it. Just at least match the size coming off the Fogatti.
@ good install guide. Thanks
@@frugalmcdogal8779 no problem
The wire you ran back to the panel. What was the problem and how did that fix it.?
Running the wire to the panel was the fix, the 12v power wire that ran through the IN-Command system didn’t want ti send power to that line so I bypassed directly to the panel.
Can you link where you got em 1/2 supply lines extender
@@aztec00001 they didn’t work amzn.to/3AknXwL
@@saltytrips why not? It didn’t fit?
@@aztec00001 explained in the video
How do you winterize this unit?
Haven’t even looked into it, we have no need too. I imagine just like you would the rest of the pipe, run anti freeze through it or blow it out.
This work propane?
Propane for heat, 12v for ignition and control panel.
🙏thank you
So everything that was supposed to work, didn't.... and everything that was an easy "drop-in" including mounting wasn't. LOL
Good content here!
Appreciate the support, thank you 🙏🏻!