Lada Niva | Fourth gear is popping out. Lets fix it! part 1.
ฝัง
- เผยแพร่เมื่อ 23 ม.ค. 2023
- The Lada pops out of gear but only in fourth gear.
This is often due to a broken thrust washer- I will try to fix it in this video.
#lada #niva #gearbox
Instagram: / seasidegarageyt
Patreon: / seasidegarage
Music: www.epidemicsound.com - ยานยนต์และพาหนะ
![[TH] VALORANT Champions Seoul - Group Stage Day 6 - EDG vs G2](http://i.ytimg.com/vi/vS-fmO6SAjY/mqdefault.jpg)
great content as usual .Every time I get notification of one of your updates I smile. just keep on spannering I love it
happy to hear that! :)
You go one step forward and two back patience is definitely a virtue you have another great video keep it up and your spirit's
John
I found out the hard way, that the paper gaskets are actually very important.
When i re-geared the transfer case on my UAZ, i put a few of the covers back together, with just liquid-gasket. and that was enough to make the whole thing "Lock-up"
Turned out the gaskets were part of the tolerance. so i got the right paper gaskets in there, and it worked like a charm :)
Interesting... it makes sense! but still... that is some tight tolerances!
But right now its the best explanation I can find on my gearbox.. :)
I have a rule. If the factory put a gasket there, then it's meant to have a proper gasket. I only use silicone where the factory states to use it or where only silicone would do the job. It's always a pleasure to watch your diagnosis and your resultant repair. I've just bought a little 125cc bike as I remembered what fun I had when I was younger. I go everywhere on it now!
thx for your videos... I'm a rookie mechanic with 1.6 niva ...thanks for the videos :)
Thanks for watching! :)
Great video! Thanks for sharing!
Great stuff as always! Thanks for some Lada shenanigans!
good explanation
I think my Duster may have a "dry" sounding release bearing but its not got any worse over 6 months or so - at 73 miles with no record of a replacement clutch my plan is to see how it develops and if needs be replace and whilst I am there replace the clutch and replace the gearbox oil as well - I like the car and intend to look after it
The Pickup I changed a release bearing on a while back had been sounding like that for many many years... and used a lot!... They can last for a long time... :)
I like the Duster.... Drove the 4x4 in Iceland some years back...
bearings are interesting things, but my rule of thumb is if the bearing is making a noise its probably due to be replaced if its a sealed bearing, if not and its dry you might maybe get away with it, but worn down bearings can last for a long time with some luck, but ive seen stuff go pretty catastrophic and its never fun
a Lada gearbox? that reminded me a particularly weird West/East engine swap. A Samara engine an gearboc in a Citroên BX chassis and suspension. yay or nay?
Yay!...
This gearbox is pretty much out of a Fiat actually. :)
@@SeasideGarage it is, yes! Fiat 124 and Lada Riva are almost the same (body wise).
It does look like someone bodged that gearbox together (but then, given the state the car was in when you got it, it's no surprise!), gaskets do provide a means of spacing things properly, such as head gaskets in the engine (the thickness of them can change the compression too), and a lack of can cause problems with there not being enough clearances resulting in premature and excessive wear...
Yea... like my R5 with double headgasket... haha :D
I saw a lot of liquid gaskets in Niva, but there are not many who have problems, but workmanship is very important, but it would be healthier if there was a paper gasket.
Im going to fit a paper gasket :)
I don't know if it helps at all, but that transmission looks basically identical to the fiat 124 one, and the corresponding fiat part is part number 4326423.. if you have nearby suppliers that would have such a thing.
I got the part in the mail already... but thanks! I could have been lucky at the local old fiat dealer actually...
Hey come on! If you change the clutch plate and release bearing then you definitely have to the last part too. The 'fingers' are mostly rotten in or will show metal fatique soon.
At Auto doc you have complete clutches for more less than all the stress andtrouble a broken clutch will give you.
Its not worn... But I agree... I would say the same to others.. but still... I am going to reuse the old.. its looking brand new. time will tell if its a bad decision... It took a couple of hours to remove the gear box... its not a big deal really.
I am a new patreon. Great video enjoying catching up on all your videos. Would it be possible to have a seaside garage sticker for my MG3
Of course you can Ian! I wrote you in there and asked actually... but write me an email on Seppowashuus@gmail.com with address, and I will send you some! :D
can you weld the pipe from the one on to the other one??
Did consider it! but trying to get it out already distorted it... a new part is 18euroes and should arrive tomorrow I hope!
@@SeasideGarage Oh awesome
I do have parts for a lot of soviet cars if you are interested. Btw how's the trabant doing
The trabant is sold to a really capable guy who are taking good care of it... I actually visited him and the car a couple of days back! :)
@@SeasideGarageIt would be nice to make a short video whenever you have a chance to visit one of your old projects, it's free content for your channel and it's just interesting to see how the cars are doing IMO.
I know money is tight for you but get a clutch kit and be done with it, changing just the driven plate is not ideal, doing half a clutch often means doing it again.
The clever thing is to do that yes... but the clutch pressure plate looks like new ... :)