Stock K20 Civic MAKES BIG POWER on the DYNO
ฝัง
- เผยแพร่เมื่อ 15 ก.ย. 2024
- IMPORTSPORTS
Address: 7667 E Iliff Ave, Denver, CO 80231
Phone: (303) 752-2422
Website: importsports.net/
INSTAGRAMS:
@OFFICIALAUTOSAUCE
www.instagram....
@RON_AUTOSAUCE
www.instagram....
@JOSH_AUTOSAUCE
www.instagram....
HONDA TH-cam CHALLENGE!!!
SAVE THE DATE!!!
DATE: 06/02/2019
TIME: 2PM-8PM
LOCATION: GULFPORT DRAGWAY 17085 RACETRACK RD, GULFORT, MS 39503
FACEBOOK EVENT PAGE
/ 481419945696231
Great power with a great tune from Sam @ImportSports.
Hondahotwheels now it just needs a great driver 😂
I really would like to know what suspension you guys are running to make the swap compatible with the car. I just picked up a k20a2 for my eg hatch
Not surprised about the power. It’s on e85 and it’s just a healthy k. 🤘🏻
Best engines ever ;)
I've got a em2 coupe with a k20a2 swap, best choice i ever made !
Engine mods:
Ported RBC manifold (70mm)
70mm tegiwa throttle body
S2000 injectors with hybrid racing fuel rail
Toda 4221 header (with hondata thermal gasket)
Custom 3" exhaust
Custom 3,5" cold air intake
Doctronic ecu
M2 motorsport radiator
Stats: 271 hp / 268 Nm
Hell yea that’s dope 🔥
Really big torque just for 2.0.. i have same setup on my k24a3 engine, I will tune it in Doctronic in Austria.. Hope about 225whp/270nm..
S2000 injectors work?
@@h22eh6 sorry thats my bad ! Thats from a previous setup, now i run 550cc Grams injectors ;)
Forgot soms things in my original post, was in a hurry, and they are pretty important to reach that power 😂
Wiseco 12.5 cp pistons
Dragcartel 2.2's
💪
Your in Denver , I thought everybody gets tuned at PFI Speed.
i think thier dyno is only open for high power outputs lol
PFI is the shitz
Same is the man
Good power! Good seeing the progress, you and Josh have been pretty consistent on content.
Why is Brent not tuning it. It's like disrespectful to tune a car in Colorado and it not be Brent.
I was just talking shit lol.
Kyle wouldn’t allow this
Kyle hate jermery he has nothing to do with auto sauce anymore@@b1razy
This is a car channel not a soap opera guys. Keep this rolling man. I see you creeping up on 10k subs.
Lazaro Garcia SUPER FACTS!!!!
Taking mine here in the next week or two to get my tune. Sam is a great guy and very helpful.
Man that hatch looks super nice with them rims and it sounds so mean and smooth at the same time 👍👍🔥
Yeaaaaaaah buddy !!!!
Sincerely cool chill dudes
Autosauce josh only 228 hp stock in denver awesome this is only the beginning hi ron cant wait to meet you this is tarypuston
Great numbers. Car looks badass
by stock you mean bigger injectors a tune and running e85
I made 226/161 on pump 93 Stock k20z1
That's What I'm Aiming For k20z1 On A EK Coupe
Hell yeah dude! Damn near same numbers here. 224/167 on 91.
I dont know how altitude or whatever works with power but here in Toronto, 220 minimum stock motor is the norm. My a2 made 226/162 stock on pump 91. Your on e85, I thought it would make more
MAXIIIMUS21 big fact but wat u did to ur a2 doe🤔bcuz I have one
My stock k20a2 made 229. I Definitely believe its stock.
Where Jeremy at............?????.....lol
Silver Stacker Bring Back Jeremy
Damn what kinda rolling start was that 😂
The K20 is the best. I have a turbo RSX-S myself here in Canada.
Its a fully build type r motor
Bro, you gotta put some proper radiator hoses on that little beast, stock Honda or nicer. Nice hatch and good power for sure
Where’s Jeremy
They kicked him out I’m Jeremys. Brother
I just made 228hp 194lb tq yesterday on my stock jdm k24a with pump gas. It still has the shit k24 intake manifold with a 70mm throttle body. I’m gonna swap to rbc and I should get some good graphs to compare.
Are you using a type s oil pump?
you would make more power if you got the RBC intake Manifold ( 06-11 civic si intake manifold) carries the power much better especially ported
killinIntegra big fact💪🏾
Wheel setup
Swap the injectors and fuel pump for E85 even stock can get good HP
Wilfred Díaz Vellón he did in the video.
Congrats on the nice gains !! 228hp on a stock motor is a huge deal.
Check out my race vids on a stock b20vtec on basemap. You might like it
How much was Sam's Dyno time for that tune
Check that throttle cable i think use can get better throttle time
My z1 did 227 161 with an rbc tho good numbers esp for the high altitude
How much tq you making ?
K20 with bolt ons. Make 220whp all the time. No suprise here
Not Sure that’s what we are surprised about! Only bolt ons here are the header and injectors, plus we are at an altitude level of 5,000 feet.
The header, injectors, E85 and Hondata made the power
@@Autosauce I tune these in Edmonton AB with a DA over 5000ft I get 210-220 Whp on K20s quite routinely :D Congrats on a successful bulid
Tuners surprised cause its a DynoDynamics dyno. They usually read low hp #'s.
lol big power lol
Great job!! Sounds really good too...
Hes in 5151 performance, stupid fast
Lol idk why you’re tuner didn’t believe the horsepower numbers 😂, those motors do that ALL DAY LONG even with that simple of a setup.
How much power do you believe e85 adds.
An fittings don’t need teflon tape or else they leak
Tell me that’s double clutch when y’all racing ?
Where jeramy
Any aftermarket header, intake, exhaust and manifold
You’re gonna break something if you keep clutching it from a roll. Lol
Twisted_717 It would be great if there was a TH-camr how not to granny shift video.
402CarKid I know what’s involved, but clutch kicking does not help tune different cam angles 😂😂
402CarKid listen to the beginning of the video and when he races. He dips the clutch and dumps it when the third beep comes
402CarKid 12:15 12:30 and the beginning
Why is he revving during a roll🤔
Kinda sounded like a downshift
Possible to fit k24A with ps using Egk2 mount?
RBC intake manifold fs
Damn. Still not Jeremy. Still waiting on that build update! I know yall reading these comments and some reason refuse to reply! Keep us updated! Is he yalls secret weapon you don't speak of something? LMK!!! And no PFISpeed Tune? DahFawwk?
Yeah Ron is being a lil ass wipe about it y dont he just say where he is or what happened acting like girls I swear
Yeah. Grown men. Common!
@@jayrodz3122 Why is Jeremy in jail? Is it true that he got caught with that bro "bruh" arrested after having sex in a parking lot!!! Ewwwwwwwwwww!
What the hell are u taking about
Ditch the intake manifold
yakuza??
“How much you think it’ll make?” Like 10-15 minutes.
yeah let’s just call it 30....
how much rpm limit on tuning???
Ok but k20a are capable of that. Nothing too shocking
Stop hitting the limiter .. you'll bent a valve
What motor is it?
You woulda got soooo many more views if you took it to Brent. Come on guys get with the program!!! Jeremy and pfi all in one video woulda been great.
Bruh thats fucking crazy you should hsve done it with stock injrctors to see because i dynoed mine and it has stage 2 cams skunk2, full exhaust headers , cai. I just bought a rbc 72 mm tb, injectors better headers and exhaust, fpr and yesh thsts fucking crazy im rocking a k20z1 and made 206 before sll the parts i bought
Oh shit the altitude levels where are you located
E85 healthy motor gives u that
👍👍from this guy
What bolt on are added? Other then header, intake and exhaust
1100cc injectors and E85.
@@Autosauce no aftermarket header or exhaust?
Cut the music
Clutch kicking it in a roll race? Lame. Also, why can’t ANY Honda driver avoid hitting redline?! Can someone seriously please explain this to me? Is it because you’re revving it past the numbers on the tach? Or do Honda drivers just like hearing rev limiter?
Sometimes it's hard learning the exact point to shift , because when you swap a k20 that revs to 8.500 rpm, and your stock tacho only goes to 7.000, and the max redline on the stock tacho is 7.800 or 8.000, your needle goes past that...
And after vtec engagement the revs climb pretty quick, so hard to judge the perfect shift.
Another reason is when you shift a little to early, you have the possibility to drop under the vtec engagement and have to climb up again. So better to shift a little to late, than to early ;)
#SAUCEBAUCE
Learn how to use that left pedal wtf are you doing hitting it when your rolling 😂
Where is Jeremy???
He fell off, he on that sauce
Where is he!!!!! I wanna know
They just ignore these comments I swear. You'd think they'd keep us informed!
Why do yall even care jeremy a loser
Nick Stevenson lmfao
it's stock but has IHE
No way its stock
#drivermod
#rondata
I have FBO on mine and only made 220whp 🥹