Great video! A few things to note: 1. Highly recommend getting a cheap pair of extra arms for soldering (yes they are available). Beginners will benefit from this. 2. While most components you chose for the build, I would all newbies to rethink about going for cheaper options. Cheaper options related to proportionally worse quality and unreliable performance, which in turn, in the long run, ends up increasing your costs in the form of repair and replacements. Hence, I would recommend saving up and going for respectable brands. For instance, Emax eco 2 motors are only slightly higher priced than the DYS. 3. Frame - would recommend going for a frame with thicker arms like the TBS Source one v3 specially if this is a beginner focused build. Beginners will crash, and the better the frame, the higher the chance that they may not end up having to replace arms or plates. 4. When soldering, try removing the gummies so that they don’t get in the way or get damaged. Great work! Looking for more videos from you!
I went to thingiverse.com , in the search bar I typed my frame name “ZMR250” , downloaded all the required files . Then I sent the files to WhatsApp number +918910147936 , after one day I receive parts from couriers at my doorstep 😊
Hi, great video, can you make a part 2 as well in which you can explain the next step, like which controller you used, which goggles, what rates you used, how you setup everything, and how was the first flight made
Hi , thank you for your comment 🙂 I didn’t touch any PID, rates and filter settings it flies great out of the box:) no prop wash no oscillations . In the end of the video you can see my first ever maiden flight with this drone. It was easiest setup for me. No trouble shooting at all. I use same radio and goggles from my first video in the channel😊👍🏻
@@fpvindia3752 alright, that's great. But is there a video in which you shoe how to bind all three together ? Like basically , what step to do right after completing this quad
I have same frame with flysky I6 transmiiter Requirement is position hold gps hold cinematic footage pls suggest flight controller and receiver for flysky I6 transmiiter
For 4s batteries 35-40A is enough in most of the cases if you use 4s batteries. Go for more Amp if going to use 6s batteries . 60A is mostly required for 6s racing drones. Because it can withstand long current bursts. Also choose the motors wisely. There is 4s Motors and 6s motors. 6s will have lower KV numbers
Hi bro, great video. Just wanted to know how the screwdrivers are fairing, are they good or they'll start to strip eventually. Ive been looking for some good drivers but cant find any and those you are using are quite low priced and am a little skeptical about their quality. Thanks, cheers mate.
Well. The point here was not to make amazing build. The point was to make a budget friendly build of available parts in India.😊 thank you for your comment tho. Your second name looks like Russian.
Hey , is it possible to build a tiny whoop or something like that under 5000 inr ? Don't need camera and vtx. Just to be confident before building an actual drone.
@@fpvindia3752 Bro KINDLY help me regard dis pls 1. 6s or 8s charger to go right now I have 6s batt 2. Toolkitrc la lot of models which one to go pls seggest a model 3. Mobile charger head toolkitrc charger ku use panalaama 4. The FPV project trusted site ah bro Kindly guide me bro, Thanks in advance.
Nice one! Just a quick question, I can see you're recording the footage using the naked GoPro, would it be able to carry a non-naked one? I mean I have an Osmo Action and it's basically impossible to strip it down.
Fpv goggles available at rcmumbai . Just keep flying whenever you have free time. Before I use to fly almost everyday. Now I fly every weekend. I’m taking it very seriously and for me there is no excuses .
Hi, I have flysky i6 transmitter. Before moving into fpv I would like to build a 4s racing drone(line of sight) Is this setup enough for performing medium acro stunts?
Very easy. Just buy a more expensive VTX with more power. And also if you want to go for long range , you need a receiver which can receive signal from your radio for longer distance. For example "Crossfire nano"
Make a drone with 3 axis gimbal with long distance range setup using beginner controller with tbs attached n with good vtx like rush also beginners wud like to use there mobile phone as display of fpv cam so add otg reciever with has longer distance range...also it wud b good to use li- po rechargeable battery for both controller and drone
Hey:) unfortunately I’m not so rich to build crazy builds like the one that you described and keep purchasing the radios and otg receivers:) I can make a video only if I have sold my drone and building a new one or if someone asked me to build for them. So that’s the issue here. Maybe when I get more subscribers I will start making drones with the money that I earned in TH-cam:) but that’s in future😊
Bro i dont have money to buy fc and battery could you help me bro! Im poor but i have aa aim to become pro fpv piolet like you bro! Could you help me ! Please
Why don't you try a travel vlog + fpv its will be insane. I'm a traveler vlogger having @theurbantraveller channel I'm just staring to learn fpv. ❤️ Keep doing bro 🥳
Seriously I would like to do some vlogs. But I’m not that kind of a person who can easily talk on camera😊 But definitely going to try it out. Thanks for suggestions:) will check out your channel now.
@@fpvindia3752 Bro 25k is too much for me but still ill think upon it 25k mai full setup ajaegi?? and mereko drone banana nhi ata na mere pass usko bnane ke liye jo tools lagte hai wo hai toh 25k mai kya pura bana hua setup mil jaega mujhe?
@@fpvindia3752 ok bhai thank you for info but the problem is I dont know how to set up I dont know How to assemble the parts and I dont have equipments to assemble the fpv drone then what should I do
Hey guys, hope all are doing well, I found the same frame made out of carbon fibre . Link: robu.in/product/zmr250-qav250-quadcopter-frame/
which soldering are you using
with soldering wire pls
www.amazon.in/dp/B01MZ505UI/ref=cm_sw_em_r_mt_dp_YWM795EF1XGE2Z6MBA4N?_encoding=UTF8&psc=1
How much does it cost?
Bro please tell me the overall cost or give me a build one I will pay
21:38 HOLY CRAP that was smooooth
Great video!
A few things to note:
1. Highly recommend getting a cheap pair of extra arms for soldering (yes they are available). Beginners will benefit from this.
2. While most components you chose for the build, I would all newbies to rethink about going for cheaper options. Cheaper options related to proportionally worse quality and unreliable performance, which in turn, in the long run, ends up increasing your costs in the form of repair and replacements. Hence, I would recommend saving up and going for respectable brands. For instance, Emax eco 2 motors are only slightly higher priced than the DYS.
3. Frame - would recommend going for a frame with thicker arms like the TBS Source one v3 specially if this is a beginner focused build. Beginners will crash, and the better the frame, the higher the chance that they may not end up having to replace arms or plates.
4. When soldering, try removing the gummies so that they don’t get in the way or get damaged.
Great work! Looking for more videos from you!
Thank you so much for taking your precious time to write all this suggestions. I will definitely consider your thoughts!👍🏻
These are so neat bro 🥺 so satisfying to watch
Thank you 😊
This video was amazing
You are a best guardian 🙂
Haha thanks buddy:)
Hey! Great video man! Which city are you based out of?
Hey thanks! I’m from Bangalore
Another great video bro🔥❤️.... Your builds are awesome. BTW I got all the parts for my drone. hopefully i'll fly it pretty soon 🤩🙌🏽.
Hey:) congratulations 👏 Hope you enjoy your first flight
bhai, tumhra udne laga ya nhi ?
amazing video bro i still cant believe it... this drone is under 15k budget. video quality is hd? it was go pro footage or camera you installed?
It was gopro footage, so the drone is 15k and gopro costed me another 15k so total 30k
@@fpvindia3752 okay which go pro? footage was good, 30k without controller?
That was gopro hero 6 black. 30k only drone and camera
@@fpvindia3752 great job.. i really want this kind of drone but i am a newbie
😁
I can build for you . Text me on instagram.com/fpv.pilot.india
Great Video 👍🏻👍🏻
Thank you!
Bro which transmitter have you used?
I used Tango 2
The links for the product are not working please update
Hae.. i have a diff ques.. in todays time, since banggood dosent ship to india, where to buy a transmitter from.. im looking for a radiomaster 16s
Hi, contact me on instagram.com/fpv.pilot.India
Hii , What about the controller you use ? Can you give more details on that?
For this I used my tbs tango 2 pro
Bro how you maked your 3d printed part? Plz tell me
I went to thingiverse.com , in the search bar I typed my frame name “ZMR250” , downloaded all the required files . Then I sent the files to WhatsApp number +918910147936 , after one day I receive parts from couriers at my doorstep 😊
This drone price how much....?
Hi, great video, can you make a part 2 as well in which you can explain the next step, like which controller you used, which goggles, what rates you used, how you setup everything, and how was the first flight made
Hi , thank you for your comment 🙂 I didn’t touch any PID, rates and filter settings it flies great out of the box:) no prop wash no oscillations . In the end of the video you can see my first ever maiden flight with this drone. It was easiest setup for me. No trouble shooting at all. I use same radio and goggles from my first video in the channel😊👍🏻
@@fpvindia3752 alright, that's great. But is there a video in which you shoe how to bind all three together ? Like basically , what step to do right after completing this quad
I don’t have a video like that. I will definitely consider making one like that:) thank you for suggesting me.👍🏻
@@fpvindia3752 ty, basically, a video titled "best beginners guide from build to flight in india" kinda....
By which transmitter can we control it
Any transmitter if you install a proper receiver which is supported by your transmitter
What is the flight time ??
8-10 mins with 1800Mah battery cruising, no acro
just one doubt which camera did u use not the drone one the mounted one like GOPRO
In this video I used gopro 6 black
@@fpvindia3752 but how is it soo slim ?
Because it’s naked gopro 6. You can type in YT “naked gopro” and find out more details.
@@fpvindia3752 thank you ❤️
@@fpvindia3752 btw can u suggest me a cheap goggle and remote kit like for a beginners
I have same frame with flysky I6 transmiiter
Requirement is position hold gps hold cinematic footage pls suggest flight controller and receiver for flysky I6 transmiiter
Hi brother, how to choose esc amp which one is better??? 35,40, 60🤔
For 4s batteries 35-40A is enough in most of the cases if you use 4s batteries. Go for more Amp if going to use 6s batteries . 60A is mostly required for 6s racing drones. Because it can withstand long current bursts. Also choose the motors wisely. There is 4s Motors and 6s motors. 6s will have lower KV numbers
@@fpvindia3752 ok thanks. So 6s battery need high amp esc's correct 👍
40A will work with both 4s and 6s . I think 35A is little bit less for 6s
Hi bro, great video. Just wanted to know how the screwdrivers are fairing, are they good or they'll start to strip eventually. Ive been looking for some good drivers but cant find any and those you are using are quite low priced and am a little skeptical about their quality. Thanks, cheers mate.
Yeah it’s low quality, not using it anymore
@@fpvindia3752 could you suggest a good driver?
Yeah sure. Try ethix . Amazing set. I think available at RCmumbai or anubisrc
how much does this drone climb in altitude ?
Up until there is no more air
How can I connect my fsiyb reciver to mamba f405
Can’t suggest. I don’t use it
@@fpvindia3752 ok bro thanks for reply i really like the way u make the videos for us thanku
Thank you very much , your comment means a lot to me😊
Bro kindly do a complete vedio on beta flight for begginers plssss🙏🙏🙏🙏
Hey, sure will make it after I can understand it completely:)
@@fpvindia3752 bro ur vedio was soo keen It was soo begginer friendly kindly do vedios regularly bro
Live long stay blessed ❣️❣️❣️❣️
@@fpvindia3752 can u plss share ur Insta id so that I can ask my doubts over there plss
Cuz I'm a complete newbie bro 🥺
Sure , just text me on instagram.com/Fpv.pilot.india
Nice build video bro...
Thank you 🙏🏻
Hiii bro please give me flight countral link
Bro can u plss suggest a good budget radio transmitter plsss
Hi, text me on instagram.com/fpv.pilot.india
@@fpvindia3752 I hve texted bro 😍
Great vid tho this is a really outdated build (except the stack) you should really look into dated components
Well. The point here was not to make amazing build. The point was to make a budget friendly build of available parts in India.😊 thank you for your comment tho. Your second name looks like Russian.
@@fpvindia3752 I am just saying there are other better dated budget components. And yeah my last name is Russian
Are you Russian? Ты Русский?
@@fpvindia3752 I am not Russian but my family is
Total beginner here..whats to do after making it..what about battery controller and goggles...programming
Hi , can’t explain you here in comments section. You definitely need to do more research about fpv
@@fpvindia3752 do you have any video
Hey , is it possible to build a tiny whoop or something like that under 5000 inr ?
Don't need camera and vtx. Just to be confident before building an actual drone.
Hey, I think you can get a drone without fpv for around 5k . But still you gonna need batteries , charger and radio
link to the remote controller
Excellent 👍👍
Thank you👍🏻
I bought speedybee motor and have to check it with multimeter how to do bro pls guide me.
Solder it to ESC and check
@@fpvindia3752 Bro KINDLY help me regard dis pls
1. 6s or 8s charger to go right now I have 6s batt
2. Toolkitrc la lot of models which one to go pls seggest a model
3. Mobile charger head toolkitrc charger ku use panalaama
4. The FPV project trusted site ah bro
Kindly guide me bro, Thanks in advance.
where are you from?
Hi , I’m from Bangalore
What about the controller
Nice build bro BTW which receiver and transmitter u use
Thank you! I use tango 2 with crossfire nano
@@fpvindia3752 thanks bro for replying and which transmitter and receiver u suggest for beginner under 10 k
Radio master TX12 with any Frsky receiver
OK thankyou bro
@@fpvindia3752 bro I want to make a fov drone under 30 k can u suggest me some good parts
what happen if drone fly away beyond the range?
If GPS install it will try to rescue and return to home. If GPS not installed , it will just drop down from the sky wherever it is.
@@fpvindia3752 thank you bro.I am planning to build my own fpv.
Hope new videos about building fpv from you.
Subscribing you bro👍
Nice one! Just a quick question, I can see you're recording the footage using the naked GoPro, would it be able to carry a non-naked one? I mean I have an Osmo Action and it's basically impossible to strip it down.
This particular drone can carry even 2 full size gopro’s:) so your osmo will work just fine and drone will still fly pretty good 👍🏻
@@fpvindia3752 Really! Thanks a lot dude 👍✌
What is the weight?
Is it under 250g or high? let us know it can be reduced in same drone ?
5 inch fpv drone is impossible to make below 250g with battery
@@fpvindia3752 Then it will need licence and registration right?
Yes
Which transmitter and receiver used
I don’t remember
Bro the link for fc is unavailable can you suggest a good budget fc?
Thanks 🙏
Contact me on instagram.com/fpv.pilot.india
Where you buy fpv goggles how much
Where did you got flying practice
I have same fpv drone but I unable to fly like you
Fpv goggles available at rcmumbai . Just keep flying whenever you have free time. Before I use to fly almost everyday. Now I fly every weekend. I’m taking it very seriously and for me there is no excuses .
Music Name - Lavender Town (Mikel & Gamechops)
Most of the part are not available like FC ESC radios and all.... can you please give us any Indian website for this parts.....
It’s all Indian websites in the description. Maybe some products went out of stock
@@fpvindia3752 yes I saw that FC and ESC are not available on all indian website.. Can you suggest a stack for the same build as you did
Text me on instagram.com/fpv.pilot.india
Hi,
I have flysky i6 transmitter. Before moving into fpv I would like to build a 4s racing drone(line of sight) Is this setup enough for performing medium acro stunts?
If you plan to do acro in LOS, that radio is enough. However it’s extremely hard to do tricks in LOS.
awesome
Thank you 🙏🏻
Can you sell this to me at which cost ? can be build a best drone in 10 to 20k?
How to increase range?
Very easy. Just buy a more expensive VTX with more power. And also if you want to go for long range , you need a receiver which can receive signal from your radio for longer distance. For example "Crossfire nano"
@@fpvindia3752 Thanks
Is it for real? Total build cost is 12k?
Those days yes, now everything changed. It became hard to import drone parts from China so the parts prices hiked up.
Flight time
This is super old video. I don’t remember such details
What's camera use this drone
Caddx ANT + Gopro 6
Does it come with controller , or we need to purchase extra ??
Need to purchase extra
Total cost in inr
Please check video description. I have mentioned total cost there
Can I get the link of setting which you have done to this drone from beta flight
I don’t have the link, but I can help you out to setup your drone when you build it👍🏻
Ok @FPV India
What is the max range of this budget build??
Range test is in the end of the video
Range test is in the end of the video
Total cost?
Now same setup will cost 18k
@@fpvindia3752 do you take custom orders?
Yea of course, I can help you to build a drone. Please contact me on instagram.com/fpv.pilot.india
nice
What does it cost for all the required stuffs??
Approx 40k
Hi, most of the products in description are out of stock, can you give alternative product links 😀
Hi, that’s true. In fact it goes out of stock within few hours after I release video😊
hlo bhai please reply i want to make drone
Hey 👋🏻
@@fpvindia3752 i want to make fpv Racing drone under 10k its that possible
@@heyyMayurLive Maybe possible if you use second hand parts
Make a drone with 3 axis gimbal with long distance range setup using beginner controller with tbs attached n with good vtx like rush also beginners wud like to use there mobile phone as display of fpv cam so add otg reciever with has longer distance range...also it wud b good to use li- po rechargeable battery for both controller and drone
Hey:) unfortunately I’m not so rich to build crazy builds like the one that you described and keep purchasing the radios and otg receivers:) I can make a video only if I have sold my drone and building a new one or if someone asked me to build for them. So that’s the issue here. Maybe when I get more subscribers I will start making drones with the money that I earned in TH-cam:) but that’s in future😊
@@fpvindia3752 how much would this setup cost within 10 km distance range whole setup ?
40k minimum including goggles , transmitter , drone, charger , batteries, antennas
@@fpvindia3752 cool thanks for your response
Can you provide me the link for the hex screws and nuts for mounting PDB and FC together with the frame.
Check in robu.in
@@fpvindia3752 thnx for the website
just buy a 4in1 esc no need for pdb
Hi bro
I I have one drone make me total cost
Teach me bro
Hi, I don’t get you
@@fpvindia3752 You tell parts order Links
Text me on instagram.com/fpv.pilot.india
no need of programming ?
Programming required
total expens bro plz?
This video is too old.all the price changed.
Do you sell ? I need one bro
Hi, I don’t sell, but I can definitely help you to get one.
@@fpvindia3752 how bro I need your help , but not soo costly
Text me on instagram.com/fpv.pilot.india
Bro i dont have money to buy fc and battery could you help me bro!
Im poor but i have aa aim to become pro fpv piolet like you bro!
Could you help me ! Please
Why don't you try a travel vlog + fpv its will be insane. I'm a traveler vlogger having @theurbantraveller channel I'm just staring to learn fpv. ❤️ Keep doing bro 🥳
Seriously I would like to do some vlogs. But I’m not that kind of a person who can easily talk on camera😊 But definitely going to try it out. Thanks for suggestions:) will check out your channel now.
@@fpvindia3752 yeah just give it a try. For India fpv is rare so it might a good start
@@Balakumar-bb6vi you have fresh channel? Around 3 videos is that right? I’m not sure if that’s your channel
@@fpvindia3752 yeah that my channel. Just started last month😅
bhai I am a absolute beginner I want to get a fpv drone in budget and start it as an hobby can you help me Can I get one under 10krs??
No you can’t start with 10k , minimum 25k for practice setup.
@@fpvindia3752 Bro 25k is too much for me but still ill think upon it 25k mai full setup ajaegi?? and mereko drone banana nhi ata na mere pass usko bnane ke liye jo tools lagte hai wo hai toh 25k mai kya pura bana hua setup mil jaega mujhe?
aap poora setap kar sakate hain 25k, lekin mujhe hindee nahin aatee. English mein likhie:)
@@fpvindia3752 ok bhai thank you for info but the problem is I dont know how to set up I dont know How to assemble the parts and I dont have equipments to assemble the fpv drone then what should I do
You need ready to fly drone. Tiny whoop
Bro Can You Build one For me I'll give you your charges ? You insta ?
Sorry, I’m temporarily not building drones .