I had problems with my Kaspa rig when I was doing this the way you're doing it. The rig would never shut down, when I told it to. So I had to update my Hive Kernel to the latest image (which is 110 currently) and then update the driver to 525.60.11. That allowed me to offset in the flightsheet. All those updates fixed that issue. You're running a pretty old Hive kernel (72) that's pre-merge. If anyone else runs in to this kind of problem, where the miner won't shut down on command, you may want to update drivers, the Hive kernel and make sure you're on the latest Lolminer. It works fine now and my 3070ti rig has an efficiency of 8.4 over 10 cards.
I watched this vid a few times back when i was mining Kaspa in the pre-asic days. i would love to see a vid for Karlsen and Pyrin since they are forks of the same algo!
Mike I noticed you are using a really old driver 510.x. You should upgrade to the latest driver it removes LHR and the cards get better efficiency. You should be on a driver newer than 520.x for best results.
Awesome stuff, Mike! Do you know if theres any benefits locking the memory on 16 series or 20 series cards as well? Would be awesome if you could make a vid on those cards as well!
Greetings dear friend! Could you make a video on how to achieve those numbers when using nicehhash on windows with the msi afterburner tool? Looking forward for another great content by you!
One thing missing from your video is how the different GPU MODELS can require lower or higher settings... Could you consider a follow up focusing on different makes and how their settings can vary ? Maybe focus on how the extra configuration arguments can increase or decrease stability? A little clarification to your instructional video here?... like can I put my hand up and ask questions? Cheers man
This is awesome. Thank you. I have the luxury of mining with no power costs. I have Circuits for 2-3 Rigs. I have about 17-19 3070s, 1 70ti, 1 3090, and a couple 3080s. I wanted to just keep all 3070s going but wondering if i should grip it and rip it with 3070ti and up GPUs?
This was very helpful! I always appreciate your efforts Mike. If you had some time again soon, I'm struggling to get my 20 series cards at their most efficient while preventing rejected shares. Do you have any advice on these cards? other than my 3070 and 3060 ti cards i'm also running 2070 and 2060 super cards
So I was able to Launch the new flight sheet with the --- commands but it doesn't show me the offset value only core and mem lock. no offset core of 400. Am I missing something? Thanks
Thanks very much for your video.I fuond my 3060Ti with hynix GDDR6 can't reach the efficient,cclk 1320 mlk 810 coff=400 if i rise the cclk=1410 the watts rise to 70w...
I have 14 cmp 50HX mining Kaspa on Hiveos. The hashrate on each gpu is 330 mh which seems reall high so im 1.67 ghs total. Which seems way too much correct me if im wrong.. Normally I do 50 to 60 mh is the average per gpu. I adjusted the over clocking ..but can't seem get the mh lower..not sure what to do? All I know it's been very unstable ..mining dynex nexa but kaspa has been most stable .can you recommend overclock settings mining kaspa..I'm using woolypooly pool..I'm new to mining
Thanks a ton..getting to work my rig after 2months.your extra config worked.anyway to increase hashrate for 3090?getting 810 now...was getting 1k plus last time
For some reason when I do the config arguments and then set the offset the offset overrides the arguments and I can get them to work together. If the arguments are set after then the core offset doest drop anything. Not sure if it's because I'm doing this on my CMP90HX cards
hey there, this locks can be used on other algorithms and/or operating systems?? So basically its the amount of mv it reduces (curve) under the default values for x frequency correct?
hey epic video i have a 3 card rig but its a mix one 3060 a 2060 and a 1660 iam using lolminer my core is 0 on afterbuner but in my flight sheet is locked @1450 mem is locked at 810 but on afterbuner its set at 210 for the 3060 and 110 2060 and 110 for the 1660 it mines then i come home from work and my rig is frozen up i have been gameing on it too ill have a vlog up today
@@Shevanovich I did the same settings in Windows of course. Those settings are just fine for windows too if you care to add the parameters to the bat file.
@alexwest5489 did locked core clock and core offset work both of them together in the bat file? Going by what you're saying that means your bat file has locked core clock + locked memory clock + fan speed?
Wow, i've never seen my pc reject lol miner like this. Google download don't want it, Brave download don't want it. hah Any ideas.. i'll go check online But ya, I saved 20w on the 3090's Mine on ! Thx man
what extra config arguments you put in gminer? I tried --mclock 810 and it gives me offsets memory not absolut. Lolminer gives me lots of errors and reboots.
exact the same oc copied from your screen... my EVGA 3080ti FTW3 (with the same vbios as yours) won't do 117w or anywhere below 130w ....i'd be better keep doing 1GH at 150w then core below 250 (doesn't matter 250 200 150 100.... power draw will get to the lowest possible point) --cclk 1950 --mclk 810 works to all of my 3080ti ... runs between 950ishMH[gigabyte models] - 1GH[evga models])
First!
Two videos in a week, you're spoiling us! Glad to see you back!
Glad to see you back posting again 😄 been missing you on here, you should do a Ergo/Kaspa dual Mining setup & OC guide
SICKKKKKKKKKK!!!!!!!
another epic one buddy KEEP EM COMING ...
YOU A G SIR!
I had problems with my Kaspa rig when I was doing this the way you're doing it. The rig would never shut down, when I told it to. So I had to update my Hive Kernel to the latest image (which is 110 currently) and then update the driver to 525.60.11. That allowed me to offset in the flightsheet. All those updates fixed that issue. You're running a pretty old Hive kernel (72) that's pre-merge. If anyone else runs in to this kind of problem, where the miner won't shut down on command, you may want to update drivers, the Hive kernel and make sure you're on the latest Lolminer. It works fine now and my 3070ti rig has an efficiency of 8.4 over 10 cards.
Thanks for the info buddy!
Thank you for your great video
My rtx 3070ti is doing 536MH at 60W ☺️👌
Thanks for the help! RTX miners are back online!
Mike you're awesome buddy. My power usaged dropped big time. Keep making these great video!!!
I like how you put all the cards on same rigs
next amd 5000 and 6000 series :D
Great video Mike! Love the content you rock dude!
Great video. I rewatched several times to fully comprehend all I could from your very informative style. Thanks so much dude!
Awesome video, pretty much doubled my efficiency on a 3060ti rig. Thank you
Thanks for the content and all the testing
Thanks for putting the work in getting these overclocks!
Love to see the 20 series as well man if possible
Great video good to see u back!
Thanks again Mike!
I watched this vid a few times back when i was mining Kaspa in the pre-asic days. i would love to see a vid for Karlsen and Pyrin since they are forks of the same algo!
I was able to trim about 15-20 watts off each of my 3070's with some tweaks based on the advice and settings in this video! Thanks!
Thank you boss, very good, 20 series if the boss with empty trouble to make a video, it seems that many people have demand, thank you boss
Red Fox your the F ing man. Thanks 😊
Thx dude , best setings for Kas
My friend, you are amazing. thank you very much for rtx 3090 graphics card
We will be glad if you prepare a video about dynex coin.
🔥🔥🔥🔥
Good video ✌🏼
Looking forward for $ERGO video.
Started mining with Red Fox Crypto, no plans on leaving in bear market. Good job as always, Mike!
Mike I noticed you are using a really old driver 510.x. You should upgrade to the latest driver it removes LHR and the cards get better efficiency. You should be on a driver newer than 520.x for best results.
Thank you for saving us from the shills
😂
Awesome stuff, Mike! Do you know if theres any benefits locking the memory on 16 series or 20 series cards as well? Would be awesome if you could make a vid on those cards as well!
Thanks!
Great video!
Greetings dear friend!
Could you make a video on how to achieve those numbers when using nicehhash on windows with the msi afterburner tool?
Looking forward for another great content by you!
One thing missing from your video is how the different GPU MODELS can require lower or higher settings...
Could you consider a follow up focusing on different makes and how their settings can vary ?
Maybe focus on how the extra configuration arguments can increase or decrease stability? A little clarification to your instructional video here?... like can I put my hand up and ask questions? Cheers man
Thanks Mike 👍👍
Anything for 20series and 10 series?
If u want to maximize then need to increase core clock which will increase watts. If want low power than this is great
Another quality video
This is awesome. Thank you. I have the luxury of mining with no power costs. I have Circuits for 2-3 Rigs. I have about 17-19 3070s, 1 70ti, 1 3090, and a couple 3080s. I wanted to just keep all 3070s going but wondering if i should grip it and rip it with 3070ti and up GPUs?
nice video Red fox, i had exact same oc setting for my 3080ti, getting same hashrate but cost more watts(130w+), any thoughts?
Thanks for informing
Please do 2000 series aswell
Interesting information, thank you! It will be more productive to earn on Crypton cryptocurrency after the market collapse.
good job Red fox......
This was very helpful! I always appreciate your efforts Mike.
If you had some time again soon, I'm struggling to get my 20 series cards at their most efficient while preventing rejected shares. Do you have any advice on these cards? other than my 3070 and 3060 ti cards i'm also running 2070 and 2060 super cards
Thanks so much! How about Amd series?
Best Video ever! Thanks men! Please same Vid. for AMD cards. Thank you
So I was able to Launch the new flight sheet with the --- commands but it doesn't show me the offset value only core and mem lock. no offset core of 400. Am I missing something?
Thanks
I just saved 400W, thanks.
Thanks very much for your video.I fuond my 3060Ti with hynix GDDR6 can't reach the efficient,cclk 1320 mlk 810 coff=400 if i rise the cclk=1410 the watts rise to 70w...
I have 14 cmp 50HX mining Kaspa on Hiveos. The hashrate on each gpu is 330 mh which seems reall high so im 1.67 ghs total. Which seems way too much correct me if im wrong.. Normally I do 50 to 60 mh is the average per gpu. I adjusted the over clocking ..but can't seem get the mh lower..not sure what to do? All I know it's been very unstable ..mining dynex nexa but kaspa has been most stable
.can you recommend overclock settings mining kaspa..I'm using woolypooly pool..I'm new to mining
Kaspa crypto futurr💪
nice video thanks dude what is the best wallet for kaspa ?
KDX is good.
have you try mining with 1660? is it worth to mine or scrap it? what about the new 4090?
Thanks a ton..getting to work my rig after 2months.your extra config worked.anyway to increase hashrate for 3090?getting 810 now...was getting 1k plus last time
I don't pay electricity so I want full stable oc😀
For some reason when I do the config arguments and then set the offset the offset overrides the arguments and I can get them to work together. If the arguments are set after then the core offset doest drop anything. Not sure if it's because I'm doing this on my CMP90HX cards
silly question: Does less voltage necesarily mean less temperature?
Redfox does setting core clock offset on arguments or setting the core on the flight sheet does the same?
hey there, this locks can be used on other algorithms and/or operating systems??
So basically its the amount of mv it reduces (curve) under the default values for x frequency correct?
Mike do you got any 40 series cards to do some numbers on?
Hey
video for Aleo mining pls
And rig setup
Firing my rigs back up this week and found this video. I have a 3070 rig and the watts in hiveos range from 55-72 but right there at 503.6 mhs.
Would you share the spreadsheet link you’re showing?
3080ti looks like silicon lottery.
So what’s the profitability??
hey epic video i have a 3 card rig but its a mix one 3060 a 2060 and a 1660 iam using lolminer my core is 0 on afterbuner but in my flight sheet is locked @1450 mem is locked at 810 but on afterbuner its set at 210 for the 3060 and 110 2060 and 110 for the 1660 it mines then i come home from work and my rig is frozen up i have been gameing on it too ill have a vlog up today
u can ust go in oc settings and do all. why the fuzz ....just my opinion
I get 820m/s on a 3080 on bzminer. Anyway I'm done with mining busy selling a gpu a day and bying and trading. Making more money that way.
Anyone has OC suggestion for rx 6600, rx 5600 or vega 56?
Hello, 6600 i suggest you 1400cclk 1mclk and 700/650/1280. if is doesn't work, up a little bit voltages values.
I got on my 3060 - 315,5 mhs 42W (software)
Thanks for the video, please type in the title hiveOS only for similar videos.
It is not HiveOs only, I did the same in Windows with LOL miner. All works well under Windows
@alexwest5489 mining in windows and doing the same settings is different.
@@Shevanovich I did the same settings in Windows of course. Those settings are just fine for windows too if you care to add the parameters to the bat file.
Here is an example LOL (hope, youtube will let through): --cclk 1410 --coff 400 --mclk 810
@alexwest5489 did locked core clock and core offset work both of them together in the bat file?
Going by what you're saying that means your bat file has locked core clock + locked memory clock + fan speed?
Hi, great video! Best values for 3070 ti and 3080 for --lock_cclock ,--lock_mclock ?
this is not secret ı use thisOC about 3 month ;) but thnx for all awesome video that u make :)
Please turn on CC for me thanks.
Getting 1.12 GH/s on my 3090.
how to mine kaspa on windows
im getting tons of crashing errors using these now with the same GPUs
human error.. LOL.. sorry .. but im saving about 80 w now for the same hash rate.. THANKS
@@NickleNinja2 couldn't get 100 watt per gpu for 3080
Wow, i've never seen my pc reject lol miner like this. Google download don't want it, Brave download don't want it. hah
Any ideas.. i'll go check online But ya, I saved 20w on the 3090's Mine on !
Thx man
Firefox
try any coin for KASPA + ??? DUAL COİN efficent?
Tried it and it wasn't great. Might revisit in the future.
@@RedFoxCrypto add zil on bzminer... profitable everyday since August at 12c power
what extra config arguments you put in gminer? I tried --mclock 810 and it gives me offsets memory not absolut. Lolminer gives me lots of errors and reboots.
gminer is losing --lock_cclock after a while mining also...
@@archivesincomplete What I did was using nvtools: nvtool --setcoreoffset 350 --setclocks 1500 --setmem 5001
@@JoaoCSpeixoto bro thank you so much
My one CVP fpga is doing 10 GHs on kaspa -- one card.... Lol
I really need to get my FPGA on KASPA.
i m using gminer for ergo+kaspa better than lolminer
exact the same oc copied from your screen... my EVGA 3080ti FTW3 (with the same vbios as yours) won't do 117w or anywhere below 130w ....i'd be better keep doing 1GH at 150w then
core below 250 (doesn't matter 250 200 150 100.... power draw will get to the lowest possible point)
--cclk 1950
--mclk 810
works to all of my 3080ti ... runs between 950ishMH[gigabyte models] - 1GH[evga models])
@@archivesincomplete Update to lolminer 1.65, this bug was fixed.
But 3080 ti lie about power draw, at the wall you have to plus ~20 w, I have one.
@@ramondiaz6044 all models or only EVGA models?
学习了硬币
Hey Mike does it work when dual mining is done? Kaspa n ergo?