Hi. This is a great video, great guide. It helped my a lot , especially understanding how to remove the fairing of the 2023 Model (I have this model to). It would have also great if you could have showed us how to mount the fairing back on again (at least on side), but I understand that the exhaust change was in the middle of the attention. Your bike looks great with the new exhaust. Sound is fantastic!!! Ballsy... Enjoy it , because the new CBR ones, starting from 2024 are quite more complicated as they predecessors. Thank you again...and ride safely.
The audio including on your last video when riding sounded fine, your voice and the sound of the exhaust. Please keep your factory exhaust rather than flinging it. Your bike looks way easier than even an oil change on a Busa. Honda builds awesome bike for sure. Grat tips as you are learning your way thru the process. A Pit bull lift would make your work so much easier for general info Sir. The factory exhaust has a cat built in which is why I recommend keeping the factory for future, you may also need a programmer to go with the exhaust swap. Thank you for sharing with us and I will watch for the final video.
Preciate it man an yeah I did keep the stock exhaust for everything you said and for warranty purposes to. I do need to invest in a lift. That might be a Christmas gift to myself 😂😂. I think the next things I will do to it is a K&N air filter, Power Commander, and tune. After that I think I’ll be done with this bike. Preciate you watching and good comment😁
Hello Would you please show me how to attach your silencer to the exhaust line? I'm having trouble fitting mine to my cb650r. Good day to you Thank you so much
I had to tighten down my headers a little more. Also I put a little gasket sealer where the can meet the pipe just to ensure no leaks. A little over kill but it works 😁
So I just installed the same exhaust on my 2021 cbr650r and having the same issue with that last bracket piece not lining up. Did you figure it out or are we putting it in the wrong place?
Hey I had to rig it up lol. So basically I ordered some extra springs and exhaust hanger clamp from Amazon, and once I fit everything as best as possible, I put some gasket sealer around where it fits together along with an exhaust pipe clamp from the parts store, and just hooked everything with each other with the springs I ordered. As a perfectionist it’s not as clean as I want it but you can’t see anything with the fairings on. The bike looks really good going down the road and even standing beside it. Hope this helps😁
You did it wrong. At the end of video you shown a original bracket mounted with two screws from down. You have to uninstall this, use screw to mount dominator bracket from down side. Also movie it in 180 degrees
Best video out there for someone like me looking for install my exhaust today
Hi. This is a great video, great guide. It helped my a lot , especially understanding how to remove the fairing of the 2023 Model (I have this model to). It would have also great if you could have showed us how to mount the fairing back on again (at least on side), but I understand that the exhaust change was in the middle of the attention. Your bike looks great with the new exhaust. Sound is fantastic!!! Ballsy... Enjoy it , because the new CBR ones, starting from 2024 are quite more complicated as they predecessors.
Thank you again...and ride safely.
Agreed I’ll note that for future projects. Also for watching and glad it helped a bit
Thanks alot, this will be major support for tomorrow🫡
The audio including on your last video when riding sounded fine, your voice and the sound of the exhaust. Please keep your factory exhaust rather than flinging it. Your bike looks way easier than even an oil change on a Busa. Honda builds awesome bike for sure. Grat tips as you are learning your way thru the process. A Pit bull lift would make your work so much easier for general info Sir. The factory exhaust has a cat built in which is why I recommend keeping the factory for future, you may also need a programmer to go with the exhaust swap. Thank you for sharing with us and I will watch for the final video.
Preciate it man an yeah I did keep the stock exhaust for everything you said and for warranty purposes to. I do need to invest in a lift. That might be a Christmas gift to myself 😂😂. I think the next things I will do to it is a K&N air filter, Power Commander, and tune. After that I think I’ll be done with this bike. Preciate you watching and good comment😁
Thanks for sharing, sounds good
Deciding on buying this exact exhaust. How has it held up over the last year since this video?
Im always worried about getting in trouble removing the catalytic converter.
Nice video bro!
This is with or without db-killer?
Hey bro we have same prob on the exhaust not hook up to anything, mind sharing how you fix it? Thanks
Hello
Would you please show me how to attach your silencer to the exhaust line?
I'm having trouble fitting mine to my cb650r.
Good day to you
Thank you so much
sexy machine, I have '99 CBR600F4 & '21 CBR1000RR
Those are 2 awesome bikes safe riding to you😁💪🏾💯
How did you get rid of the ticking sound? I just installed my exhaust and it also has that ticking sound even when the bike is running warm
I had to tighten down my headers a little more. Also I put a little gasket sealer where the can meet the pipe just to ensure no leaks. A little over kill but it works 😁
I can’t find a single cbr650r at any dealer here in Vegas idk y
Man best wishes to you. Hope one will pop up soon for you
So I just installed the same exhaust on my 2021 cbr650r and having the same issue with that last bracket piece not lining up. Did you figure it out or are we putting it in the wrong place?
Hey I had to rig it up lol. So basically I ordered some extra springs and exhaust hanger clamp from Amazon, and once I fit everything as best as possible, I put some gasket sealer around where it fits together along with an exhaust pipe clamp from the parts store, and just hooked everything with each other with the springs I ordered. As a perfectionist it’s not as clean as I want it but you can’t see anything with the fairings on. The bike looks really good going down the road and even standing beside it. Hope this helps😁
You did it wrong. At the end of video you shown a original bracket mounted with two screws from down. You have to uninstall this, use screw to mount dominator bracket from down side. Also movie it in 180 degrees
Can u explain better for me please?@@HerosInDiapers
Definitely too quiet