2002 2013 toyota camry Matrix Rav4 Highlander Lexus 2.4 Timing Chain Replacement step by step part1
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2022
- 2010-2012 LEXUS HS250H 2.4L 2362CC L4 DOHC, (16 VALVE), ENG CODE "2AZFXE"
2009-2010 PONTIAC VIBE 2.4L 2362CC L4 DOHC, (16 VALVE), VIN CODE "0"
2010 SCION TC 2.4L 2362CC L4 DOHC, (16 VALVE), ENG CODE "2AZFE"
2005-2009 SCION TC 2.4L 2398CC L4 DOHC, (16 VALVE), ENG CODE "2AZFE"
2002-2009 TOYOTA CAMRY 2.4L 2362CC L4 DOHC, (16 VALVE), ENG CODE "2AZFE"
2007-2011 TOYOTA CAMRY 2.4L 2362CC L4 ELECTRIC/GAS DOHC, (16 VALVE), ENG CODE "2AZFXE"
2009-2010 TOYOTA COROLLA 2.4L 2362CC L4 DOHC, (16 VALVE), ENG CODE "2AZFE"
2001-2007 TOYOTA HIGHLANDER 2.4L 2362CC L4 DOHC, (16 VALVE), ENG CODE "2AZFE"
2009-2013 TOYOTA MATRIX 2.4L 2362CC L4 DOHC, (16 VALVE), ENG CODE "2AZFE"
2001-2003 TOYOTA RAV4 2.0L 1998CC 122CU. IN. L4 DOHC, (16 VALVE), ENG CODE "1AZFE"
2004-2008 TOYOTA RAV4 2.4L 2362CC L4 DOHC, (16 VALVE), ENG CODE "2AZFE"
2002-2008 TOYOTA SOLARA 2.4L 2362CC L4 DOHC, (16 VALVE), ENG CODE "2AZFE"This Is How You Can Replace The Timing Chain On Toyota 2.4 Engine From Beginning to End Part1 - ยานยนต์และพาหนะ
Thank you. You seem to be the only person that did a step by step.
thank you.
Saludos, y si es por fuga de aceite, por esa parte, hay que realizar el mismo proceso
ola saludos tambien, depende donde este la fuga, cualquier fuga q venga d adentro del area d cadena d tiempo si. gracias por compartir.
Would it be best just to take the engine out to do this job if you have the time too
there is no need but that is up to you, it still can be done with engine in the car.
What is that star bit?
loved the video, i looked over your channel but i cant find part 2?
thanks for visiting my channel, there was a delay with p2 and it is coming out in the first week of january 2023 sorry for the inconvenience.
@@JM-AUTO thanks for the update
El mio tira aceite por el time belt cover tengo que hacer todo eso para poner el nuevo empaque
hi love your videos always so thorough! question for you...my 2004 camry 2.4 has a problem but im not sure what it is. axels are good and transmission is good and it has a recent tune up but when i put it in drive nd give it the gas the car bucks but there are no check engine lights....when it bucks the the revs stay the same its not like its going from 1500 rpm to 4000 rpm. i cant fiigure it out...do you know what can cause the bucking?
hi and thanks for watching my videos, do you all letters P R N D are highlighter when ever they need to? in so many cases this is the neutral safety switch that is loosing some of the positions already, also rusty brockets that are attached to that transmission cable doe to rust they dont allow the shifter or neutral safety switch to complete the change to another gear, also wornout or weak drive gears in the transmission but to find out if this is the issue put the car in drive in a slope with out the foot in the brake pedal and the car is supposed to move forward if the drive gears are still in good condition. also misadjusted transmission cable.
@@JM-AUTO yes aall the prndl light up. its not gears slipping. what do you think about possible stretched / worn timing chain , can that cause bucking when accelerating?
@@CAFEX24 There are a number of things that may cause the car to hesitate when accelerating such as low fuel pressure, dirty or faulty mass air flow sensor, clogged, dirty fuel injectors, faulty throttle position sensor or a bad fuel pump, dirty vvt solenoid control vaves. all of this might happen with out check engine light in the instrument cluster. personally i dont think it is the timing chain, does the engine shake?.
@@JM-AUTO no shaking at all...starts up nicely and idles great! but everytime i take off it goes vroom, vroom, vrooom....lol. tranny shifts fine too. even when i accelerate in park its smooth ...only in drive does it hesitate, i should try replacing the maf and clean out the tb. thanks alot!
Transmission sensor under the air filter
Muy Bien, tienes El link para la parte 2
ola amigo, estara asta 11/25/22 mis disculpas con tigo y gracias por venir a mi canal.
How did you do the video in both English and Spanish? Looks like the same video on both. God bless you Yahshua /Jesus is coming Soon
hi, yes I have to translate it from english to spanish since I first got my TH-cam channel in english and one year later I created my other channel in spanish, I appreciate your comment, time and support thanks again.
What miles should the timing chain be replaced?
between 80.000 and 120.000 miles, As a general rule, if oil was changed on a regular basis, the timing chain should last the lifetime of the engine. but the guides, tensioners and other timing chain components wont last that long. thanks for visiting my channel and God bless you and your family as well.
If it's a chain and not a rubber belt I think I'll leave mine for the life of the engine and hope it lasts.
The tensioners n guides don't last the life of the car n the chain wears out n finally it looses time.
There is no way that drill had enough torque to break those 14 and 17mm bolts did you break them with a breaker bar before filming?
I loose them first to save time with video.