Just installed Lamin-x on my head and tail light this morning. Pretty thick stuff. I managed to get away with a hair dryer but had to use it on the high setting. The heat makes a HUGE difference in how workable the material is
You can use a hair dryer! 1000's of ppl use them. You only need soapy water, a card and the wrap! Use degreaser to clean first and make sure to wipe it all off! Couple minutes later and you're done!
Awesome video! I like your personality but at the same time quick and to the point. Helped a lot. I'm pretty confident I can do this even tho tint can be well..... tough Nice seeing the relationship with your dad as well! Seems like a cool guy!
Lol! Separating the layers....been there... finally used two pieces of tape ,one on either side of the film to separate. Use this film for everything from Nail art, to costume and makeup ,crafts..bags ,phone cases and wind chimes!jewelry .even food buffet accent decor! Did not know about the heat part.. and didn't realize that there was a top layer of clear film! I just picked it up online for craft projects.
Danny, I just had a phone call from Xzibit. He and Mad Mike told to advise you install a few monitors into the front seats and also a few around each headlight. That will make car sick, promise!)
Dude your dad and I need to customize our mustangs together! Lol Mbrp street is the best exhaust for that car trust! Or the mbrp race for a louder exhaust but its the deepest tone for an ecoboost and not annoying
I have an 2015 ecoboost and in my opinion the magnaflow competition series cat back is the best exhaust for what you described. The street system is just not enough sound so I wouldn't waste my money on that.
Nice video! I attempted to do the same exact neofilm on my 2005 solara. It was hard as hell and the end result was terrible lol. You make it look too easy lol
Danny Courtney I don't know if u r willing to spend this much but check out an armytrix exhaust plus is a valve control so he can be loud and quiet not a lot people have the armytrix exhaust systems so I don't know how hard it will be to get ur hands on but they do make some of the best sounds exhausts out there it is definitely worth a look
Danny, a suggestion for the exhaust is the Dbx series muffler from Flowmaster, because its design is more for the turbo cars than n/a and it limits if not removes the higher pitch sounds in an exhaust ( its main focus is the tin can sound )
Oh man... Danny, you gotta get pops sporting your "#Coldstartnation" tee and then with the mods to the Ecoboost, we got to get him some Purple Drank!!! Thumbs up Bro!!!
I didn't realize it had a protective film on the outside and i was bummed when i started seeing scratches as i was putting it on but you saved me! Looks way cleaner when i peeled it off right now! is it alright to shout you out in the video i post my vid of my tint install?!
+Justin O'Sully yea man it's the best feeling pulling back that protective film and ya man go for it and send me the link when u upload it so I can see how u did!
Im doing it the wrong way on my motorcycle visor. The film is wasted. Now i know to work this stuff out. Im gonna try again. Can i use soap on water to make it kind of slippery when squeezing the water off?
Do you get pulled over for this? I want to do exactly this to my civic coupe but I live in New York. As far as I understand, the headlight tint laws just say 70% of light haS to filter through and I’m assuming the transparent iridescent doesn’t block any light at all bc it’s not a dark tint. Any advice for me?
Would you say this Neo chrome film be almost like a iridescent peral in color or what it looks almost like that? Like ive seen stuff like this go by other names?
Lmao, lots of things can go wrong. You can snap some plastics, loose screws , mismatch screws, forget how they was on, and so on. Why complicating things without the need to?
Really really should be slightly soapy water. And a lubricant instead of water for Clay barring. Yeah you can get away with go low tech as possible but why not use the small things that help?
Danny you have an awesome relationship with your dad man that's really cool man
Don't be fooled by the camera
More videos with your pops it's good to see something new involved with family....Family is forever 🙌
so is herpes
the father and son spending time together is priceless 👍👍👍
I hope that when my child is older I can spend quality time like this with them.
did you neochrome your dad's glasses
😀😀
Resonator delete with Roush Axle backs and CAI. Also a emailed tune from Cobbs!
LeikkLeikk also agree! And exhaust can go with anything most sound good
Could you switch on the headlamp to see the final effect, please?
Yes!! I need to see them on at night!
@@grape_ringpop it doesn’t affect that
Danny Courtney feat. Daddy Courtney
Just installed Lamin-x on my head and tail light this morning. Pretty thick stuff. I managed to get away with a hair dryer but had to use it on the high setting. The heat makes a HUGE difference in how workable the material is
You can use a hair dryer! 1000's of ppl use them.
You only need soapy water, a card and the wrap!
Use degreaser to clean first and make sure to wipe it all off! Couple minutes later and you're done!
You could totally tell your pops enjoy being in your video right on dude!
+jose Perez more for the future!
Awesome video! I like your personality but at the same time quick and to the point.
Helped a lot. I'm pretty confident I can do this even tho tint can be well..... tough
Nice seeing the relationship with your dad as well! Seems like a cool guy!
+Quinn's Cars thanks my man!
This would look SICK on a black or white car surprised how sick it looked on that red color!!!
Your dad is awesome dude! He reminds me of my grandpa who owned an IROC Z camero. My grandpa was always buying red camaros lol
Subtle effect but looks cool, adds uv protection, and doesn't affect headlight performance. Nice.
Lol! Separating the layers....been there... finally used two pieces of tape ,one on either side of the film to separate. Use this film for everything from Nail art, to costume and makeup ,crafts..bags ,phone cases and wind chimes!jewelry .even food buffet accent decor! Did not know about the heat part.. and didn't realize that there was a top layer of clear film! I just picked it up online for craft projects.
At 4:00 his voice where he says “you can see it” triggered SIRI on my iphone 😂😂wtf
Your dad is cool as heck Danny
+Joshua Tellez thanks man!
dannys dad is a ricer, "maybe some more pin striping" lmao keep it up danny im liking the vids
Cool to see your dad is the video. Love to see what you guys do with the mustang
Borla cat back for the ecoboost mustang! Super deep sound
Gonna try on my Eclipse looks sick
Your dad is a true OG
Amazing new idea for my camaro, amazing video filled with amazing plp. Ty for this video!
#throtl36 NEEDS these!
+throtl agreed
Email us, we will have them in the mail right away!
suprised how good those eco boost mustangs handle
+Sean Johnson me too
Really good job brilliant its good that your dad helped that its self is brilliant 👍🇬🇧
Your dad is awesome. Reminds me of my dad lol
good to see dad so superlative!
You won't get that v8 sound coming from a 4 cylinder but mbrp race series catback will give you a deep sound
Danny, I just had a phone call from Xzibit. He and Mad Mike told to advise you install a few monitors into the front seats and also a few around each headlight. That will make car sick, promise!)
Definitely needs a tune!
Dude your dad and I need to customize our mustangs together! Lol Mbrp street is the best exhaust for that car trust! Or the mbrp race for a louder exhaust but its the deepest tone for an ecoboost and not annoying
I love it! Doing this on my Honda Civic
I have an 2015 ecoboost and in my opinion the magnaflow competition series cat back is the best exhaust for what you described. The street system is just not enough sound so I wouldn't waste my money on that.
Nice video! I attempted to do the same exact neofilm on my 2005 solara. It was hard as hell and the end result was terrible lol. You make it look too easy lol
hahaha danny your dad is awesome. I can't wait to see the kids with your dad. Get an x mid pipe exhaust. heard those sound great
this is way too awesome!!!!!! please provide the direct link to the product please. thanks
The video would be nothing without the Hawaiian shirt! 😊👍
would it be easier to remove the headlights and apply the film?
+Dinsdale Drummond I don't think so, on the car it is stable
Dinsdale Drummond not the new mustang. to get the headlights off you have to remove the entire bumper
I have a 16 ecoboost easiest and cheapest exhaust with really good sound is a muffler delete and resonator delete if you want it loud.
Thumbs this video all the wayyyyyyyyy upp
Danny Courtney I GOTCHU FAMMM
Danny Courtney it won't let me. I can only do one normal thumb up.
Danny Courtney Awesome looking stuff! I would love to do this on my 3rd gen TL once my Headlights are done getting modified.
Great content Danny Keep up the awesome videos 👌🏻
Danny Courtney I don't know if u r willing to spend this much but check out an armytrix exhaust plus is a valve control so he can be loud and quiet not a lot people have the armytrix exhaust systems so I don't know how hard it will be to get ur hands on but they do make some of the best sounds exhausts out there it is definitely worth a look
Look into the R serious that's the most aggressive sounds they have to offer at the moment you won't regret it trust
luis flores sounds good
Stoked for the mustang mods!
I'm here because I'm trying this tomorrow
hope to see Daddy Courtney in future videos, you need a mad blow off valve for the mustang and a bit more boost!!
+Daniel Zanon agreed
As an Australian i need to add one more thing, some mad skids!!
Your dad is awesome! More of him in videos!!
+Austin Surber sounds good
your dad had something else to say and you just edited it out at the end lmao that's was pretty funny
+Jesus Abreu didn't have to do with the video
how u gonna not show it with the headlights on
for the eco boost mustang. MBRP has a deep sounding exhaust.
Best way to put headlight tint to get full coverage is to remove the whole headlight assembly.
Danny, a suggestion for the exhaust is the Dbx series muffler from Flowmaster, because its design is more for the turbo cars than n/a and it limits if not removes the higher pitch sounds in an exhaust ( its main focus is the tin can sound )
The mustang ecoboost borla exhaust was amazing
Great video! Cool to see your dad
The 3m headlight tint I used is 1.8mm thick. If you're is thicker I think that's pretty excessive
Danny great video! I am on the premiumautostyling site and did u order the Neo Silver Chrome Tint?
+T Torres1183 I order the neo chrome that looked the most clear
Yes, its NEO SILVER!
Premium Auto Styling how much should I order for the headlights of my 2016 Focus ST
Does it affect the brightness of the headlights at all?
it's gonna be hard to get a v6 sound out of it but one of my friends has his straight piped with 5 inch tips. hope this helps =)
Armytrix is the way to go for the exhaust
Yo thank you for this vid !
the stang looks dope danny, :D
CARVEN EXHAUST 💪🏼 have it in my v8
Oh man... Danny, you gotta get pops sporting your "#Coldstartnation" tee and then with the mods to the Ecoboost, we got to get him some Purple Drank!!! Thumbs up Bro!!!
I didn't realize it had a protective film on the outside and i was bummed when i started seeing scratches as i was putting it on but you saved me! Looks way cleaner when i peeled it off right now! is it alright to shout you out in the video i post my vid of my tint install?!
+Justin O'Sully yea man it's the best feeling pulling back that protective film and ya man go for it and send me the link when u upload it so I can see how u did!
How does it look at night
Cool video and helps alot but you didnt show when you made the cut out using exacto knife
Hey👋🏼 I'm the guys from the picture of your car swapped with miley! Did you like it😂
+Félix Mercier I thought it was cool!
dads got drip
Im doing it the wrong way on my motorcycle visor. The film is wasted. Now i know to work this stuff out. Im gonna try again. Can i use soap on water to make it kind of slippery when squeezing the water off?
U can use one drop of soup per 16 ounce bottle of water
dude you are awesome
keep it up
I just really like his shirt.
Do you get pulled over for this? I want to do exactly this to my civic coupe but I live in New York. As far as I understand, the headlight tint laws just say 70% of light haS to filter through and I’m assuming the transparent iridescent doesn’t block any light at all bc it’s not a dark tint. Any advice for me?
Do the other front lights
love your channel
Did you guys fix the back of the car yet?
+Charles Salway yes we did!
Aren't you supposed to not use alcohol on headlights because it ruins the plastic?
Would you say this Neo chrome film be almost like a iridescent peral in color or what it looks almost like that? Like ive seen stuff like this go by other names?
I got a Mustang too you should help me out with my headlights and wrapping my roof.👌🏻 SD
Which is the product you used? Most of the ones I can find don't have the outside film.
mbrp race exhaust its pretty awesome
Maybe this is a dumb question but wouldn't be easier to remove the whole headlight and wrap it then? Great video btw! 👍 Up
If you find removing the bumper easier than sure lmao
@@danielluczak4695 lmao?
Lmao, lots of things can go wrong. You can snap some plastics, loose screws , mismatch screws, forget how they was on, and so on. Why complicating things without the need to?
Can you do one on a headlight that has bumps on it like the Subaru Imprezas or Hyundai coupe
Roush axle back exhaust
Got it for my hooptie it’s cold af in nd buuut I have a heat gun so I should be ok.
looks good, good job!! when is premium going to hire you?
+nrstreak good question hahaha
SOOOOOOON! Danny's actually really good!
What difference in mercury and neo chrome...
Black widow muffler will make it sound savage
David Haynes you mean a ralsh exhaust?
Nicholas Few huh
Anybody knows the exact tint? I like this exact one. Just a light shade
Bring back the old outro!
Link for the wrap you bought? I bought some crappy wrap last time
I think it goes more into white or black cars
Hey I live by Escondido! Can you do mine or guide me? I always mess these things up plus I don't have a cool dad :)
Black roof wrap
Any disturbance in the light shed
I like your dads shirt.I want it.
Love it this!!!
Really really should be slightly soapy water. And a lubricant instead of water for Clay barring. Yeah you can get away with go low tech as possible but why not use the small things that help?
i love ur dad
Where did you get that vinyl film at and what is it called?