anyone else here because they are getting a 2 stroke soon and never had a 2 stroke before only a 4 stroke and now you have no idea on how much oil to put in? no just me okay
No... because when you mix oil with gasoline, they will not separate from each other. They're "miscible" (mixable). On the other hand, for example, you mix water with oil, the oil will settle at the bottom. They are not miscible.
What engine kit would you recommend for a 1980's 20" BMX bike. I will be using it mostly during the winter in Minnesota on the frozen lake with studded tires. Thanks!!
I would love to see a build for an Orange County chopper bicycle because I want to buy a kit but don't know what kit to get that would fit on my bike without having to do modifications
sigh this explains why I was having problems I put in almost a 60%/40% when it is supposed to be %90/10% was under the impression you used the bottle itself for mixed fuel so its 8 ounces for 1 gallon of fuel and there are 3.5 litres in one gallon. I tried to get a Metric bottle but you just can't get one.
How do you change the oil on a 2 stroke motor? My neighbor asked me that today. I had to share this cause I am still laughing about that question but it wasn't a dumb question cause he didn't know. I just showed him this video just now and told him that every tank is adding oil to the motor. I don't know how the oil works in a 2 stroke but I know it burns with the gas and it lubricates the engine as it is burning it. I know more about 4 stroke motors but I do mess with 2 stroke carbs and I have replaced the igniter, electric box that gives spark to the spark plug a few times. Normally the spark box don't go bad but my friend has a cheap Chinese ebike and I replaced it 3 times within the past 5 or so years. I started with a new plug but it barely sparked, so I ordered the spark box, which that's what the Ebay listing called it and he was good for 2 years. He doesn't have a drivers license and that's his transportation and I think my neighbor is in the same boat as my friend. The break in process that you said is what my neighbor is going to do right now. Thanks for sharing this video cause I was able to share this with him and the limited experience that I have with 2 stroke motors. I am thinking about doing a 4 stroke or ebike eventually but for the time being, I have a regular bike for exercise or for a 2nd form of transportation but eventually I want a fatbike with some kind of motor on it. I have a truck but gas prices and insurance are going up and I may go down to not having a vehicle. I used to have a motorcycle and I miss riding it but insurance was getting ridiculous but a motorized bike would probably give me that same joy, without having to pay insurance. I am sure that is why people are going this route but cops are getting harder with motorized bikes and it's almost as if they are on the insurance company's side. I think it's depends on how you ride the bike as well, if they see people not following the road laws and they are reckless driving, that's when they pull you over.
Question, my gas scooter calls for 25:1, i believe that would be the break in period. After I can go 32:1 or 40:1. Now if I switch to 32:1 or 40:1 do I have to manually adjust the carburetor idle and fuel mix screws? If I wanted to do a weeks test for each mix and check the plugs for fouling, and do comparisons on temperatures with different fuel mix, isn't it important to adjust the carburetor each time to the correct fuel mix after it warms up??
Whats the adjustments for an Evo 2x Big Wheel 50cc Gas Scooter ? I would like to get one. But, I'm afraid my dyslexia might get in the way of understanding. Can you please simplify this for me. ty.
To help me out and probably everyone else can u do more exhaust vids and please include the BBR Tuning 2-Stroke Long Shot Extended Exhaust Muffler Pipe
Video has helpful, Thanks. what i'll really like to know, how do you adjust the high/low carburetor screws on a two cycle engine.a brushcutter to be exact.
hey I brought a brand new bike motor kit and its a 50cc 2 stroke motor its all ready to run but i need to know how to mix the fuel with the oil and how much to mix for that 50cc 2 stroke cuz i don't want to mess up on it
how could you verify that existing gas tank has correct mix of fuel and Oil? is there a device to do this? or strips that change color? or a basic test kit with chemicals to add and then compare to a color chart?
Hey I can’t seem to fit my engine on right. I have to put it a little cricket because of a part sticking out of it. It rubs on my pedal. Do u know how I can fix that
... what's the best gas to use? ... I run high test with 5.2ml syntech per gal. problem is, I'll go for a ride but, when I turn it off, a couple of hours later, it won't start. ... also, what's the best spark plug to use besides the champion j17lm?
My one I got of of eBay tells me to run 15:1 for the first 3 tanks is that a good idea or not just sounds a bit rich and the spark plug may not get enough spark To ignite it get back to me Please
it should be good for about a month , even longer in an airtight steel container as plastic containers still allow gas to evaporate and spoil especially mixed, definitely should mix just enough to fill the tank
Sorry for such question but wondering if gasoline is the same as petrol? And if it is, then what kind of petrol should I use Leaded or Unleaded? Thanks!
10 ปีที่แล้ว
Yes is petrol, best to use unleaded, is more environment friendly.
I bought a engine from zeda they say synthetic and synthetic blends are harmful to these little engines I'm not sure that I believe that . What do you think about this , please let me know and thank you .
for every 16 parts of gas you need 1 oil. So in the video he uses 1 gallon of gas. there are 128 Ounces in 1 gallon. Now divide 16 into 128. You then get 8. so you'd use 8 parts oil with 1 gallon of gas.
If u have 10 gallons, that means 10*128= 1280 Ounces gas. If you want a ratio of 16 gas to 1 oil, that means you wanna have 16 times less oil than gas, so 1280/16= 80 ounces of oil. Another way would be the following : we know that for 1 gallon gas, you need 8 ounces oil. So for 2 gallons gas, you'd need 16 ounces oil... 3 gallons gas, 24 ounces oil... etc. Hope this helps !
hey I have a question if you run your engine with a little bit more oil than your supposed to is that bad 4 ounces is the lowest I saw on the video what if I run 6 ounces is that bad I have a brand new engine I have to break in
If it's a 2-stroke engine...Yes In a 4-stroke engine, the gasoline is poured into the little gas tank, while the oil is poured into another part of the engine, just like a car.
I'm using Walmart Super Tech oil for 2-stroke jet skis / outboard engines. I'm not hearing any fire. Will that oil work or it might be the magneto that is bad? I'd really appreciate your help!
So i have this pocket bike 49cc or 47 i don`t know for sure but it starts and if i go to maximum acceleration for 2-3 seconds it works but after that it dies do you know why ....... i just bought it and i don`t know how to make the gas and oil mixture maybe that`s the problem i think i`ve putted to much oil in the gas Also i`m from Europe>Romania i don`t know your measurements Another question would be >can i put like 90% gas 10% oil like 90 ml of gas with 10 ml of oil?
how bad is it really to skip break in i have the first like weak of just spewing oil everywhere right i have don 3/4 of a gank of 16:1 would it kill my engine to just go straight into 20:1 on the next fill? i understand engine life this and that but will it just were out faster or will it lock up or something
What type of oil SAE 10W30, etc? I'm in Japan, so I can't have this oil shipped here. Is there a specific type for 2 stroke motors, like for chainsaws? Please advise.
i think i added too much oil... the whole small bottle in my mixture 3.5 gallon... smh what can i do to make this thing start.. had it for over a year and never turned on.
Take a cough syrup measure and you 2 stroke oil, when you go to the Gas Station. I need to take a calculator as well. Ok, fill your tank. Read how much gasoline you paid for. In the US, that number will be in tenths of a gallon, if you are using a Motorized Bicycle tank. multiply that number by 128 [as per ounces] Divide that number by your ratio. That's how much 2 stroke oil you want to use, in ounces. Hope that makes sense to you.
stupid question. :p I had my bike going REALLY fast but now it's going soooooo bloody slooooow. (1/2 the speed) any ideas? could it be the mixture? (18:1)
+Ëinsmen Brumude thanks for the reply I got it to work a while ago the clutch was loose. and the bolt to lock the clutch that's on the clutch lever broke so I used zip ties. I know ghetto but then I found a $2 replacement and works like a charm :)
ok so my motor fuel mix starting was 6 ounces of oil but I used 8 ounces for the first 3 fill ups. Now the motor will not start back up at all. after the 3rd fill up, I have to use 4 ounces of oil after the 3 fill up. Any ideas how to get the motor started again
Nah when I got mine fist built. I was coming home from school and a saw my dad trying to start it out of the window and when I got off the bus he had started it and went full throttle (went prob 15 back then cus engine was still new) and never broke it in. But it still runs today and never had an issue. And every time I used it I always used 46:1. Which gave it some more speed. But I will always remember that.
if i get it right you need to ride 20-30 minutes (especially at first runs ) ., how long you need to wait "on average " for motor to cool down and to engage it again ?(for first break in first gallon , and on regular basics)
This is what the autoparts store guy convinced me to buy. But I feel like it's wrong. I'm not putting it in the tank until I'm sure. (They usually don't really know much in there, blind leading the blind.)
Michael Heaton You can use those mixes. We recommend mixing the fuel yourself so that you know what you're giving your motor and get a feel for how lean or rich you want to run your bike.
mixing your own is better you know what you put in and when to adjust...these engine fuel ratios are not a 1 size fits all..varies by the enviroment you live in...and is your engine is tuned or not ...for me living in new england(eastcoast) with a mild tuned 2 stroke..#70 jet, 19:1...some may run more lean then me ..like any where from 3 2:1 to 50:1 ...i recommend 16:1 for the first 3 gallon...from there 19:1 or 20:1 for the remainning life of the engine .
So if I mix the oil with the gas, 1 Gallon of gas and I do 30:1, then once I mix 1 gallon, can I fill the rest up with gas or is it EVERY gallon you have to have oil? Like if I have a 5 gallon gas can, then I do 1 gallon mix oil, then do I just top off the gas can with gas and no more oil?
Hi, you've probably figured this out by now but you add in a certain amount of 2-stroke oil per gallon, for instance if you want a 32:1 gas/oil ratio you add 4 ounces of oil per gallon of gas, so if you want to mix 5 gallons with oil for a 32:1 ratio you would add 20 ounces of 2-stroke oil. I mix mine in 1 gallon batches though so I can experiment with different ratios.
He said a 20:1 ratio. This reply is late, but that means that if you are going to use 1 gallon of gas, or 128 ounces, you need to use a little more than 6 oz of oil.
I just bought a new 80cc bike and when I start it to ride were do I put the choke all the way on 100percent or 50percent 0r 75percent. because the motor is brand smacking new
Only use 2 stroke oil that is designed for air cooled 2 stroke engine. Never use tcw3 2 stroke oil because it won't run right. Tcw3 is intended for out board use. Use Jaso FD certified air cooled 2 stroke oil, known as lawn equipment oil if you want you want to make your motor last longer and keeping them running at peak performance.
@@alexhickey5633 may I ask why you use this method? Ive been told to start with a 40:1 ratio for break in and then switch to 50:1. People have me so confused I need to know what's right,
@@devonlamb1606 part of it has to do with the metals being very soft in the first few startups. The 30:1 mix doesnt allow wear to happen, just cure the metal. 30:1 all the time will choke up the engine with carbon. Which is why you go to 40:1 mixtures. 40:1 of the cheap stuff allows it to actually break in properly. Break in is a small amount of wear happening btw just so everything seats together nicely. As for the 40:1 full synthetic well thats to just keep it running for thousands of miles troublefree. I find 50:1 wears these out too fast cos at the end of the day its still cheap metals we're dealing with
my neighbor is a 2 stroke engine mechanic and he says you need to break it in at 5 mph or lower only. is that correct? you said 20. he thinks 20 might ruin the engine.
Think I did like 20:1 for one tank then no less than 25:1 after. I've got over 2000 miles on it. Also only full synthetic, air cooled quality chainsaw oil.
You can run that stuff at 40:1 and it wont hurt a thing. Its advertised to be run at 50:1 but probably designed to be run as lean as 70:1 to ensure proper lubrication
Dam, i have my original top end at 2000 miles and ive ran all types of crap through mine, mainly contaminated petrol that has diesel in it. I know people who work in scrapyards so i get free stuff like that the odd time. 40:1 full synthetic oil in mine for 1800 or 1900 of those miles
@@adamdorris4081 theres a difference in over-doing the mix ratio too though. Anything richer than 30:1 in my experience caused huge carbon buildup in everything and scored up the cylinder real good
![ประสบการณ์ จ้าง Developer ที่ผมจะไม่มีวันลืม [ภาค1]](http://i.ytimg.com/vi/bzivN4KDg-k/mqdefault.jpg)
This is very helpful for people just getting into this
8ounce to 1 gallon is 16:1 ratio. My bicycle has half gallon tank . Which is probably common size.
In a previous video you recommended 40:1 craddle to grave. So which is it?
Appreciate the vid man, was wondering what i needed for my bike an this is perfect.
i have done 40:1 for 3 years with no problems whatsoever. Not one single issue.
anyone else here because they are getting a 2 stroke soon and never had a 2 stroke before only a 4 stroke and now you have no idea on how much oil to put in?
no just me okay
Me, gonna get my bike fixed and then get a 2 stroke kit.
Just got a motorized bike.. such a blast lol
Nice
Yep switching from 4 stroke I don’t know what type of oil to use and how much 😂
A ratio rite measure cup has everything on it you need...pints,cc,oz,and ratios from 16:1 all the way to 70:1 pre marked for easy mixing
It looks like the fuel filter is installed in the wrong direction. Check the filter's direction-indicating marks.
I was wondering do the engine used motor oil and the lower half of the motor
No... because when you mix oil with gasoline, they will not separate from each other. They're "miscible" (mixable).
On the other hand, for example, you mix water with oil, the oil will settle at the bottom. They are not miscible.
Very helpful videos you all post thanks for making it easier to run my bike
This guy should be a doctor. He’s got steady hands 🙌 👍
I was told 16:1 for the 100 mile break-in and 40:1 after that, please correct me if wrong.
40:1 always, craddle to grave. Never fails
What engine kit would you recommend for a 1980's 20" BMX bike. I will be using it mostly during the winter in Minnesota on the frozen lake with studded tires. Thanks!!
I would love to see a build for an Orange County chopper bicycle because I want to buy a kit but don't know what kit to get that would fit on my bike without having to do modifications
I'm doing a OCC Chopper build.
I have one and I put a mini bike jackshaft on it so the chain doesn't have clearance issues
Whats the recommended ratio to break in a yamaha banshee after rebuilt???
sigh this explains why I was having problems I put in almost a 60%/40% when it is supposed to be %90/10% was under the impression you used the bottle itself for mixed fuel so its 8 ounces for 1 gallon of fuel and there are 3.5 litres in one gallon. I tried to get a Metric bottle but you just can't get one.
So half a gallon would be 4 ounces?
Helpfull thanks I'm looking into getting one.. how about once the motor is broken in what ratio do I use then??
Can always ask Google
4 ounces of oil for 1 gallon of gasoline...I've been using that ratio for five years...no problems 👍
Does it need engine oil? Every how much time you have tou change it? Please answer
How do you change the oil on a 2 stroke motor? My neighbor asked me that today. I had to share this cause I am still laughing about that question but it wasn't a dumb question cause he didn't know. I just showed him this video just now and told him that every tank is adding oil to the motor. I don't know how the oil works in a 2 stroke but I know it burns with the gas and it lubricates the engine as it is burning it. I know more about 4 stroke motors but I do mess with 2 stroke carbs and I have replaced the igniter, electric box that gives spark to the spark plug a few times. Normally the spark box don't go bad but my friend has a cheap Chinese ebike and I replaced it 3 times within the past 5 or so years. I started with a new plug but it barely sparked, so I ordered the spark box, which that's what the Ebay listing called it and he was good for 2 years. He doesn't have a drivers license and that's his transportation and I think my neighbor is in the same boat as my friend. The break in process that you said is what my neighbor is going to do right now. Thanks for sharing this video cause I was able to share this with him and the limited experience that I have with 2 stroke motors. I am thinking about doing a 4 stroke or ebike eventually but for the time being, I have a regular bike for exercise or for a 2nd form of transportation but eventually I want a fatbike with some kind of motor on it. I have a truck but gas prices and insurance are going up and I may go down to not having a vehicle. I used to have a motorcycle and I miss riding it but insurance was getting ridiculous but a motorized bike would probably give me that same joy, without having to pay insurance. I am sure that is why people are going this route but cops are getting harder with motorized bikes and it's almost as if they are on the insurance company's side. I think it's depends on how you ride the bike as well, if they see people not following the road laws and they are reckless driving, that's when they pull you over.
I’m having trouble with keeping my chain on with my Jack shaft kit… is there anything you can recommend?
Question, my gas scooter calls for 25:1, i believe that would be the break in period. After I can go 32:1 or 40:1. Now if I switch to 32:1 or 40:1 do I have to manually adjust the carburetor idle and fuel mix screws? If I wanted to do a weeks test for each mix and check the plugs for fouling, and do comparisons on temperatures with different fuel mix, isn't it important to adjust the carburetor each time to the correct fuel mix after it warms up??
Thx, Patrick ! Super-Effective!!
Whats the adjustments for an Evo 2x Big Wheel 50cc Gas Scooter ? I would like to get one. But, I'm afraid my dyslexia might get in the way of understanding. Can you please simplify this for me. ty.
To help me out and probably everyone else can u do more exhaust vids and please include the BBR Tuning 2-Stroke Long Shot Extended Exhaust Muffler Pipe
Video has helpful, Thanks. what i'll really like to know, how do you adjust the high/low carburetor screws on a two cycle engine.a brushcutter to be exact.
Don't hate on me but, it's the same for a dirt bike right? Because I saw a bycical
cr3ep1ing Betrayal its for a 2 stroke
hey I brought a brand new bike motor kit and its a 50cc 2 stroke motor its all ready to run but i need to know how to mix the fuel with the oil and how much to mix for that 50cc 2 stroke cuz i don't want to mess up on it
dear bike berry i was wonder is the back rim supose to start spining on its own after realeasing the cluch with use trothel
how could you verify that existing gas tank has correct mix of fuel and Oil? is there a device to do this? or strips that change color? or a basic test kit with chemicals to add and then compare to a color chart?
Very helpful!!
Hey I can’t seem to fit my engine on right. I have to put it a little cricket because of a part sticking out of it. It rubs on my pedal. Do u know how I can fix that
Would have been nice if you did the 20:1 ratio cuz that's what I need help with measuring
Same here. BikeBerry, where are you? 🚵
Yea someone tell me the ratio of mix of 20:1 in a gallion of gas for a chain saw
LECH POZNAŃ! THAT'S RIGHT! Thank you for your video it was helpful!
Thanks this video is very helpful
What type of oil you use to mix the gas?
Patrick plz can u help me i got an 1998kx80 new to bikes if I put 6pound in tank how much 2stroke do I mix thanks any help would be fab
... what's the best gas to use? ... I run high test with 5.2ml syntech per gal. problem is, I'll go for a ride but, when I turn it off, a couple of hours later, it won't start. ... also, what's the best spark plug to use besides the champion j17lm?
I need one two three cooking oil with my gasoline and it works really good thank you
is this for any cc motorized bike because I just wanted to know the mixture ratio does the mixture ratio depend on the cc?
This is sooooo helpful and easy. Thank you!!!!
I have an 80cc gas powered bicycle I put 50.1 mixed gas it runs for a few minutes than It dies out what causes that issue
Can you use the true fuel stuff you buy premixed already?
My one I got of of eBay tells me to run 15:1 for the first 3 tanks is that a good idea or not just sounds a bit rich and the spark plug may not get enough spark To ignite it get back to me Please
i lost the gas cap on my gas tank can i use a plastic bag tied around the lip of the tank for now till i get my cap
If I mix the oil in the jerry can and use about half of it, the oil and gas in the jerry can that I left, will they separate over time?
it should be good for about a month , even longer in an airtight steel container as plastic containers still allow gas to evaporate and spoil especially mixed, definitely should mix just enough to fill the tank
Sorry for such question but wondering if gasoline is the same as petrol? And if it is, then what kind of petrol should I use Leaded or Unleaded? Thanks!
Yes is petrol, best to use unleaded, is more environment friendly.
O
I bought a engine from zeda they say synthetic and synthetic blends are harmful to these little engines I'm not sure that I believe that . What do you think about this , please let me know and thank you .
I added 100ml of 2 stroke to a gallone of fuel and I got a engine comeing so how much more 2stroke will I need to put into the Jerry can
I got a question im so confused with the 16:1. What does the 16 means. And the 1. Can you explain to me please.
for every 16 parts of gas you need 1 oil. So in the video he uses 1 gallon of gas. there are 128 Ounces in 1 gallon. Now divide 16 into 128. You then get 8. so you'd use 8 parts oil with 1 gallon of gas.
BikeBerrycom so if I got a 10 gallon tank, two stroke, do I divide 1280 by 16 or 10?
Good question I was just wondering the same thang thanks 👇👇👌
If u have 10 gallons, that means 10*128= 1280 Ounces gas. If you want a ratio of 16 gas to 1 oil, that means you wanna have 16 times less oil than gas, so 1280/16= 80 ounces of oil.
Another way would be the following : we know that for 1 gallon gas, you need 8 ounces oil. So for 2 gallons gas, you'd need 16 ounces oil... 3 gallons gas, 24 ounces oil... etc.
Hope this helps !
Do u need to put bottom end oil and we're and what kind
hey I have a question if you run your engine with a little bit more oil than your supposed to is that bad 4 ounces is the lowest I saw on the video what if I run 6 ounces is that bad I have a brand new engine I have to break in
I have a banshee and Im going to use yamalube. what's the mixing ratio ?
can you have 2 gas tank working at the same tim or switching 1 to the other
Yes,,, you just need a T valve and use the cut off levers to switch from one tank to the other !!!
What about the 43cc 2-stroke Bicycle Rear Friction kit?
If it's a 2-stroke engine...Yes
In a 4-stroke engine, the gasoline is poured into the little gas tank, while the oil is poured into another part of the engine, just like a car.
Hej , noticed you wearing the kks lech Poznan t , just wondering ??
hi i stay in india and here nobody knows how to do the fuel mix so can i just use 2 stroke oil without gax mix or normal petrol??
I'm using Walmart Super Tech oil for 2-stroke jet skis / outboard engines. I'm not hearing any fire. Will that oil work or it might be the magneto that is bad? I'd really appreciate your help!
Anthony Diaz
Where did you get a tank like that?
So i have this pocket bike 49cc or 47 i don`t know for sure but it starts and if i go to maximum acceleration for 2-3 seconds it works but after that it dies do you know why ....... i just bought it and i don`t know how to make the gas and oil mixture maybe that`s the problem i think i`ve putted to much oil in the gas
Also i`m from Europe>Romania i don`t know your measurements
Another question would be >can i put like 90% gas 10% oil like 90 ml of gas with 10 ml of oil?
Look for a crimp in your fuel line or your gas line might be loose.
ive got a 100cc two stroke minarelli is the same ratio applicable?
how bad is it really to skip break in i have the first like weak of just spewing oil everywhere right i have don 3/4 of a gank of 16:1 would it kill my engine to just go straight into 20:1 on the next fill?
i understand engine life this and that but will it just were out faster or will it lock up or something
Go straight to 40:1 of a cheap 2 stroke oil preferably not a full synthetic. After that go 40:1 of a quality full synthetic forever
What ratio are you sopose to use after its broken in and why
What type of oil SAE 10W30, etc? I'm in Japan, so I can't have this oil shipped here. Is there a specific type for 2 stroke motors, like for chainsaws? Please advise.
Bushido Photo, LLC you've got to be able to get some Castrol just buy Castrol power RS for 2 strokes
Chainsaw, lawn trimmer, snowmobile.. Anything that's listed as a "2 stroke" oil is sufficient.
what is the engine/bike kit on shown in the video i like it!
Bought a new 3.6hp boat motor calls for 35:1 mix so what would be the onces for one gallon please
1/4 pint of oil to a gallion of gas comes up to about 33 to 1 ratio.
i think i added too much oil... the whole small bottle in my mixture 3.5 gallon... smh what can i do to make this thing start.. had it for over a year and never turned on.
What ratio do I use after the break-in period? For how long do I use that ratio, then after that ratio, what do I go to next?
Thank you in advance
after the break-in period, we recommend a 20 gas : 1 oil ratio for the rest of the time that you use the bike!
If my tank was 1500 ml and i have mix 20:1 ratio how much oil would i have to mix with gas to get a perfect mix ?
BikeBerrycom is it possible to mess up the carbourator if i continue to use the 16:1 ratio for after the break in period ?
Take a cough syrup measure and you 2 stroke oil, when you go to the Gas Station. I need to take a calculator as well. Ok, fill your tank. Read how much gasoline you paid for. In the US, that number will be in tenths of a gallon, if you are using a Motorized Bicycle tank. multiply that number by 128 [as per ounces] Divide that number by your ratio. That's how much 2 stroke oil you want to use, in ounces. Hope that makes sense to you.
Lachiepower0402
Got a question if you put to much oil in the gas can it hurt the motor
If its once off the most itll do is foul a plug. If its all the time your piston rings can waer unevenly causing low compression from blowby
stupid question. :p I had my bike going REALLY fast but now it's going soooooo bloody slooooow. (1/2 the speed) any ideas? could it be the mixture? (18:1)
check your choker nd your clutch nd your gas ,might be leaking
+Ëinsmen Brumude thanks for the reply I got it to work a while ago the clutch was loose. and the bolt to lock the clutch that's on the clutch lever broke so I used zip ties. I know ghetto but then I found a $2 replacement and works like a charm :)
If I use a 32-1 ratio on my enduro, then how much oil do I put into the tank when I’m only filling it up with an extra 1 gallon of gas
Put the same in the motorised bike
ok so my motor fuel mix starting was 6 ounces of oil but I used 8 ounces for the first 3 fill ups. Now the motor will not start back up at all. after the 3rd fill up, I have to use 4 ounces of oil after the 3 fill up. Any ideas how to get the motor started again
Call our team at 1-800-317-0479. We'd be happy to help you figure out this problem and getting you riding again.
Clean the spark plug and use 40:1
Nah when I got mine fist built. I was coming home from school and a saw my dad trying to start it out of the window and when I got off the bus he had started it and went full throttle (went prob 15 back then cus engine was still new) and never broke it in. But it still runs today and never had an issue. And every time I used it I always used 46:1. Which gave it some more speed. But I will always remember that.
is that mixture for a 2 stroke bicycle kit?
if i get it right you need to ride 20-30 minutes (especially at first runs ) ., how long you need to wait "on average " for motor to cool down and to engage it again ?(for first break in first gallon , and on regular basics)
Break in is a myth
I got some dark colored full synthetic oil for 2 stroke engine and on the back it says one 2 oz bottle is 50:1. Is that good for the engine?
This is what the autoparts store guy convinced me to buy. But I feel like it's wrong. I'm not putting it in the tank until I'm sure. (They usually don't really know much in there, blind leading the blind.)
I know home depot provides a two stroke motor gas premkxed with oil (true fuel) that produces high performance. Could I use that on my bike?
Michael Heaton You can use those mixes. We recommend mixing the fuel yourself so that you know what you're giving your motor and get a feel for how lean or rich you want to run your bike.
mixing your own is better you know what you put in and when to adjust...these engine fuel ratios are not a 1 size fits all..varies by the enviroment you live in...and is your engine is tuned or not ...for me living in new england(eastcoast) with a mild tuned 2 stroke..#70 jet, 19:1...some may run more lean then me ..like any where from 3
2:1 to 50:1 ...i recommend 16:1 for the first 3 gallon...from there 19:1 or 20:1 for the remainning life of the engine
.
Can I mix brake fluid with gasoline for my 100cc motor
I Googled it up. It's not a good idea.
So if I mix the oil with the gas, 1 Gallon of gas and I do 30:1, then once I mix 1 gallon, can I fill the rest up with gas or is it EVERY gallon you have to have oil? Like if I have a 5 gallon gas can, then I do 1 gallon mix oil, then do I just top off the gas can with gas and no more oil?
Hi,
you've probably figured this out by now but you add in a certain amount of 2-stroke oil per gallon, for instance if you want a 32:1 gas/oil ratio you add 4 ounces of oil per gallon of gas, so if you want to mix 5 gallons with oil for a 32:1 ratio you would add 20 ounces of 2-stroke oil. I mix mine in 1 gallon batches though so I can experiment with different ratios.
MrTechKid
So he said 8oz of oil for first 2 tanks so after brake in I give it what like 4oz of oil?
He said a 20:1 ratio. This reply is late, but that means that if you are going to use 1 gallon of gas, or 128 ounces, you need to use a little more than 6 oz of oil.
can u uses 2 cycle oil with the motor bikes
I just bought a new 80cc bike and when I start it to ride were do I put the choke all the way on 100percent or 50percent 0r 75percent. because the motor is brand smacking new
Full open when riding and half open when you start it
do i have to use scooter oil like you are, or can i just use regular 2 cycle oil?
Cory Reagan as far as I’m aware 2 cycle oil is 2 cycle oil
Only use 2 stroke oil that is designed for air cooled 2 stroke engine. Never use tcw3 2 stroke oil because it won't run right. Tcw3 is intended for out board use. Use Jaso FD certified air cooled 2 stroke oil, known as lawn equipment oil if you want you want to make your motor last longer and keeping them running at peak performance.
if you put just gas in the tank and its running through the engine does that mean I ducked the whole thing up?
+rees dabeast yup
Hello pls
How many litres is the first two tank
I just got a brand new 2 stroke engine so everytime time I fill my bike with gas do I mix in oil also
Yes. The mechanical design of 2 stroke engines require a constant mix of oil and fuel because its lack of an oil reservoir.
@@bikeberry is there a way i could somehow install a oil resevoir to a 2 stroke ?
I was sold 50:1 oil. Is that the same oil you are using? How much do I use for a gallon?
30.1
Forget 16:1 too oily. 30:1 cheap oil for 2 tanks, then 40:1 cheap oil, then 40:1 synthetic forever
@@alexhickey5633 may I ask why you use this method? Ive been told to start with a 40:1 ratio for break in and then switch to 50:1. People have me so confused I need to know what's right,
@@devonlamb1606 part of it has to do with the metals being very soft in the first few startups. The 30:1 mix doesnt allow wear to happen, just cure the metal. 30:1 all the time will choke up the engine with carbon. Which is why you go to 40:1 mixtures. 40:1 of the cheap stuff allows it to actually break in properly. Break in is a small amount of wear happening btw just so everything seats together nicely. As for the 40:1 full synthetic well thats to just keep it running for thousands of miles troublefree. I find 50:1 wears these out too fast cos at the end of the day its still cheap metals we're dealing with
Oh and 30:1 is only for 1 tank, then 40:1 cheap for a tank aswell
this helpt me alot thanks
Is it per 16 pints of gas: 1 pint of oil for the break in period? Ratios are easier understood when given a unit of measurement xD
yes, or 16 drops gas/petrol and 1 drop oil :-) to be silly
or for you guys across the pond, 1.6L petrol and 100ml oil
thank you.... I live in the US, fuckin hate the imperial system. prefer metric 11/10
After 2 tanks do u stay with same oil mixture ratio
After Break in you will want to do a 20:1 ratio.
Appreciate it
what kind of gas comes after the16 to 1
Can I mix unleaded petrol with penrite 2 stroke engine oil?
my neighbor is a 2 stroke engine mechanic and he says you need to break it in at 5 mph or lower only. is that correct? you said 20. he thinks 20 might ruin the engine.
T-shirt with Lech Poznań? Are you from Poland?
KrisFilmStudio He is from Poland!
I guessed it, good!
How far can you go on a full tank
sorry im bad with math so what amont of oil would i mix for 20 to 1
Mix 6.4 fluid ounces (fl oz) of the proper oil in a "one gallon" gasoline container.
How long is the breaking in period??
Roughly 2-3 full tanks
BikeBerrycom cheers!
How many litres is a tank pls
Think I did like 20:1 for one tank then no less than 25:1 after. I've got over 2000 miles on it. Also only full synthetic, air cooled quality chainsaw oil.
You can run that stuff at 40:1 and it wont hurt a thing. Its advertised to be run at 50:1 but probably designed to be run as lean as 70:1 to ensure proper lubrication
@@alexhickey5633 that's ok man. I'm still running 25:1. Still runs, 3200 miles. Original top end.
Dam, i have my original top end at 2000 miles and ive ran all types of crap through mine, mainly contaminated petrol that has diesel in it. I know people who work in scrapyards so i get free stuff like that the odd time. 40:1 full synthetic oil in mine for 1800 or 1900 of those miles
@@alexhickey5633 that's pretty nice man. Keep her cool and lubed! Nice!
@@adamdorris4081 theres a difference in over-doing the mix ratio too though. Anything richer than 30:1 in my experience caused huge carbon buildup in everything and scored up the cylinder real good
What happens if you use engine oil instead of normal oil in the fuel