Mazda3 (2014-2018) Front Brake Replacement | Mexican Assembled Car

How I changed the front brakes on my 2015 Mazda 3 (Assembled in Mexico)
Tools needed:
-Car Jack and Stands
-Torque Wrench and 21mm socket (wheel removal, mistakenly said / put 19mm in video)
-Breaker bar
-14 mm socket / wrench
-Wire brush
-Flat head screwdriver / small pry bar
-Slip head pliers
-Anti-Seize and brake grease
-Zip ties (for holding caliper - optional)
-Disc brake caliper wind back kit: amzn.to/3pSViGU
Parts (Note that there is a difference between Japanese and Mexican assembled Mazda 3 (at least for this generation 2014-2018).
Parts were purchased from RockAuto.com.
Front Pads (Hardware Included): Raybestos MGD1759CH (R-Line)
Front Rotors: Bosch 34011591
Video is for entertainment purposes only. I am not responsible for any damage to your vehicle should you follow the steps in this video.

[@thomashardly2864]

Thanks for showing the hardware installation details

[@ka1195]

Thnx for sharing!😊

[@brentworksgarage]

Thanks for watching!

[@kevinguitard4986]

Thanks. Very good job with the anti seize and re greasing.

[@brentworksgarage]

Thank you!

[@bastogne315]

Just got mine done by garage. Had to do it again myself n apply anti seize. A hole mechanics

[@javis2048]

Pregunta, para cambiar las balatas de un modelo 2017, son el mismo tipo y tamaño las balatas delantersas que las traseras??

[@brentworksgarage]

No. Different part numbers between the front and rears. Also different part numbers based on where the Mazda 3 was assembled. :(

[@tonysanchez9667]

Are the bottom clips optional on the break pads

[@brentworksgarage]

Not sure what exactly you are referring to. The brake pad guide plates/clips (that the ears of the brake pad itself sit in) are required. The squealer usually goes on the inner pad, usually required as well. The brake shims are on the back of the pads should also be used.