New BCM on a 2016 Ford Focus RS with ForSCAN
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- In this video I'll tell you the story and show you how to program a new BCM for your Ford Focus RS (This also applies for other Ford models). In this video I am using ForSCAN (Forscan.org) to program a new OEM BCM.
How did you get around the PATS/ key programming with the new BCM?
Hi! How to reprogram a bcm to remove code u1000 u3000? (Ranger 2016, headlights issue). Ford wants me to change the module but I’ve seen it can just be reprogrammed.. no one does it where I live. Thought of learning to do it. Thank you in advance.
Hello friend, I need help with solving a problem, how do I activate the reverse sensor, which module is it in, can you help me?
Thank u sir for sharing your knowledge with others
You are a life saver. God Bless.
Hello Lars, I hope you are very well. Your video is very interesting. I currently have a 2020 F150 that had its BCM water damaged. I installed a new one but need to reprogram it. Could you help me by getting the File from the motorcraft page since I am outside the United States and it won't let me register. Thank you very much for your support. Greetings.
Hey to clarify your statement that the bcm is a central control module is wrong. Modern cars use a 2 wire communication standard called CAN ford’s use 3 CANBuses and the bcm as well as most of the other vehicle related modules communicate on one bus. The multimedia system is on a separate one, and there’s another one for diagnostics. I have been spending a lot of time attempting to hack my 2016 Focus.
I have code U2100:54 ABS. Any suggestions on this one? I changed ABS module due to part failing.
Very good. Hi! do the downloaded files come with the vehicle's start immobilizer codes? I'm from Brazil
Need help I’m on v2.4.11 2011 fiesta original pcm having issues with a p0420 code and battery light on assuming it’s pcm issue got a second hand pcm from the junk yard trying to re program it no luck on forscan I can’t see any options for reprogramming
I wish I could help you - unfortunately I haven’t explored this lately and currently I don’t have a car to test with. I’d recommend you reach out to forscan and/or Google it.
I have Mondeo mk5 2015 and I need changing BCM. I understand as built etc, but how does it store keys and all other stuff related to immo there? Couldn't see you doing this
I am pretty sure your Mondeo is saving key fob info in the PCM and not the BCM, but you need to look that up to be sure.
Hi I want to attempt to do this for my 17’ rs. The car was front end damage and the bcm got dented up. Still works but lots of random codes and lights. Did you have to program any keys or only everything shown in video??
There is no need to program keys in this scenario as those are not directly logged in the BCM
Hi, my 2018 Mustangs passenger side mirror stopped working all of a sudden, it rolled down by itself and now it wont go up, it's totally dead. Also im experiencing issues with the gear shifter sometimes being stuck in Park, especially on cold starts and when the car is warm it will shift out of park. I checked all fuses, brake switch etc. and theres nothing wrong with them. Do you think this could be related to the BCM?
I doubt it. I think you should start by getting an OBD tester, then read out all codes and go from there. The two problems are not related even though they do link to some of the same modules.
Hi, can i use this tutorial to update my BCM? Or can it only be used when I change my BCM module?
Can you update bcm using Forscan??
Thank you ❤
Dealer told me Forescan doesn't work on 2020+ models for programming modules? Is that true?
Not true at all had no issues using it on a 2021 F-150 and a 2020 F150
Did you have to reprogram the car key's during the BCM swap process?
That should not be required.
Great job Sir.
Hi,have you disabled the pdc”pull drift control” on your car?cheers
Hi, I'm afraid not - My PCM is locked currently, and as far as I remember that includes the PDC also. Currently considering getting started with HP Tuners to build my own tune as everything is going to shit right now with Cobb :)
Can you put a used pcm in with for scan? Trying to on an 08 focus
The answer is yes. But in order for the system to be recognize the essay way. You save the file of the original module in (as build format). that's considering that you can still communicate to the old module. (Take a screenshot of the info). Replace with the new module or (USED) to the car. You will now get multi communication error between module that's OK... then you go back in PCM and flash it (Load all) with the save file. (Take a screenshot of the info) That will input all the information from the original PCM to the new one. After it done you go back and clear code. Everything Should be back to normal. In some instance like a 2013 F150 i was working on it did not but nothing serious there was two lines that i needed to manually write the line numbers using my Screenshot. I compare the original to the flash one to find the one that didn't reflect the original values. Once i did that i clear DTC again and all was None in code.
@@Gabriel-x2y Maybe you can help me I have two pcms one orginal second programmed and in my car right now. I want to swap back to ma 1 st PCM but I know it will be problem with PATS. Is it eanugh that I will do a module initialization PATS and it will work again, cuz it has all my data of my car already. Problem is that I have focus 2016 keyless system with one key only one is lost but in the system 2 keys are programmed. Need some advice.
Damn i really appreciate the help bud
You're welcome - More will follow, but I am swamped at the moment.