Gerrald Farms thanks! Well actually I haven’t got the 444 yet I’m getting it tomorrow as it’s my birthday went and saw it today and started her up as she’s been sitting for 12 months
I was having some of the same problems, so I did what you had done. Changed the hydraulic fluid and filter. Still have a steering problem. I have a 1394. Does the 574 have a filter in the steering reservoir? Mine still didn't steer good. That's what I am going to change next.
Where do you add the hydraulic oil? I just got my 574 and I'm low on fluids. I've ordered the manual for it. Is it in the rear above the pto? Also any recommendations on hydraulic oil?
1/17/21 No hydraulics after draining fluid and replacing filter. "AIR LOCK" I assume. Had retired Case I H mechanic suggest running the tractor in neutral and cranking the steering wheel left and right repeatedly. Did this for a minute or two and got the hydraulics back.
Thanks for watching and commenting. I’ve had couple leak out the filter housing. If it leaks slow when off next time you start up it can keep put the air out the filter housing into the system.Keep us posted on on how it does. Have a good week
Now that was a good video and repair sir. Got to keep that hydraulic system serviced. Odd how a seal caused that issue. Was it just an O-ring for the canister? That cartridge and canister very similar to the JD 3020 that I have. 👍
@@GerraldFarmsdoes all the hydraulic oil not spill out when u take off that housing, or does it not come out without the engine running and the hydraulic pump going thanks.
Great that, I have an old 784 that I only use once a year in Ireland for bringing home the turf or the peat as yee might call it, I've never changed hydraulic oil just topped up and so far no problems, but least I know now where the filter is and how to replace if necessary thanks.
Thanks for watching. Sometimes they are aggravating. Several old timers I know won’t change the seal ever time they change the filter. Because of having trouble with the O-ring. Have a good one
I have a 784 with the same symptoms. Hard to imagine that this is all it could be! I just got it and Im not even sure how to check the fluid as with the tractor off there is nothing on the stick. Someone told me I have to have it running. Comment?
Thanks for watching and commenting. It should be on the stick with the tractor off. If the seal leaks the oil out the housing every time you start it up as oil enters the housing it introduces air in the system. One way to see if the filter o ring is leaking is to let it set a couple days then loosen the filter housing. You should have a quart of hyd oil. If not the seal is letting it leak out.
Thanks for watching and commenting. There’s a dip stick right behind your left foot. When your setting on the tractor. Everything on the 574 hydraulics uses the same fluid. Have a good one
@Jim when you fill it behind the seat, then check it with the dipstick behind the left floor board. Thanks for watching and commenting. Merry Christmas
@@GerraldFarms ok. I have an -83 IH 585 and when I released the bolt to the hydraulic filter it felt like there was A LOT of oil coming out of there. I do not have any extra oil at home so I decided to put it back in again. But maybe it's normal to loose some oil when changing the hydraulic filter?
@@Dibulok i normally catch it to put back in if I don’t have more on hand. Just be careful with the o ring , it’s easy to not get it sealed and loose a lot of oil
Do you have a video of a Hydraulic fluid change. I have an IH 2400a but I belive it is same setup except I have a backhoe on it. O need to know where to add fluid street I change it.
Thanks for watching and commenting. On my 574-464 you add Hyd oil behind the seat. Between the lift arms. A big plug you remove to add oil. I’m sure we have a video on it. We have over 600 videos. We do a Sunday night live hangout every Sunday night. 8:30 pm est. drop in if you get a min.
I'm going through something similar right now. Changed the filter in my 574 and now no hydraulics work at all. Not even after a few minutes. I've had that housing off 20 times I bet to try and get it to seal up. You think that since I'm not getting any hydraulic power at all that it could be something else? I've never had this much trouble with a hyd filter change.
Thanks for watching. I’ve got a few questions. Before you changed the filter was the Hyd working good? If not what was it doing? After you run it and let it sit does any oil drip from the filter housing? If any drips when you start it up it introduces that air back into the system. Let it sit for awhile with something clean under it so you can tell if it drips. If no drips after several hours try running it a little longer keep turning the wheel and working the lift up and down to move the air in the system. Keep us posted on what you find. Have a good one
@@GerraldFarms, everything was working good before the change. I had used it the week before to get the garden plowed up and it handled the 3 bottom like a boss. There's no oil that drips out of the housing when I let it sit. I'm worked the wheel and lift over and over again trying to get it to pick up but it just doesn't have any pressure. I have flow through the system because I can put remote ends on the remote lines and have flow out of them, just no pressure. I'm slightly concerned that I had a weak pump and it finally went out trying to prime back after the filter change but like I said...it handled that 3 bottom plow just fine the week prior.
I wouldn’t take the filter off any more for now. Every time you do you introduce more air. How’s the Hyd oil level? Send me a email Gerraldfarms @gmail.com
Good day Yea that filter is a buggar to put in. 1 comment about grease might help. We have alot of horse & buggy around us, got to fix something brought home , didn't use for a while oil all leak out of gasket. Thanks good video
Good video and good information to have, wish my problem could be that easy. I have a case 595 that the 3 point will go up and down all day until I hook something up to it or just stand on the lower arms and then it will go up but not go back down. I can step off the lower arms and it goes down. Anybody got any idea what would cause that?
Thanks for watching and commenting.They have a Hyd cooler in front of the radiator . I use the other 574 to pull a 7ft disc mower all summer and a round Baler and have never had any issues with the hyd over heating.
Thanks for watching and commenting. I would have to disagree. That pump is still going strong. The seal that goes around the housing for the filter was leaking. When it set over night or days it would leak out the bowl. When you start it that air was introduced to the system. New o ring problem solved. That was a couple yrs ago and couple hounded hrs. I would not of believed it if I didn’t see it. Have a good one
Good job Jacky. Looks like you got it figured out. Too bad about the tripod. Those older tractors keep on going. Thanks for sharing.
Thanks for watching. I ran it for about a hour and it seems good. 🤞🏻 I bent the tripod back and it works. Have a good one
That's a good looking little tractor- nice job on the repair!!
Thanks for watching. Have a good one
Glad you got it fixed. I am going to change my hydraulic filter on my 1394. Going to change the oil also.
Thanks for watching. If the 1394 is the same type filter be sure to get the housing lined up so it seals properly. Have a good one
It works!!
Slick looking tractor!
Thanks for watching. We painted it about 8-9 years ago. Have a good one
Nice job with the diagnostics. Glad it ended up being just a seal.
Thanks for watching. Now I’m ready for some good hay cutting weather. Have a good one
Nice IH 574 ! Good Tractors ! "Like Bullet Proof" !
They are very tough and reliable tractors. We still us them. Thanks for watching and commenting. Have a good one.
All you need to do is to use it, my dads got a 574 and we just use it and it’s great! So good that I’ve gotten my self a 444
Thanks for watching. We have a 464 we run our rebaler with. Have a good weekend
Gerrald Farms thanks! Well actually I haven’t got the 444 yet I’m getting it tomorrow as it’s my birthday went and saw it today and started her up as she’s been sitting for 12 months
I’m looking at a 5230. Just looked at it today. We have a live hangout every Sunday night at 7:30 pm. Drop in if you get a chance.
Gerrald Farms yeah will do if I can👍
nice easy fix, good job Jackie
Thanks for watching. Some times we get lucky. Have a good weekend
Glad ya got it figured out. Sucks when things go wrong on something ya barrow.
Thanks for watching. That does make it worse. Have a good one
Man glad it was a simple fix. Good deal
Thanks for watching. Soon as the weather allows we’re ready to start cutting again. Have a good one
I was having some of the same problems, so I did what you had done. Changed the hydraulic fluid and filter. Still have a steering problem. I have a 1394. Does the 574 have a filter in the steering reservoir? Mine still didn't steer good. That's what I am going to change next.
No just the the one filter with a metal screen behind the filter. Make sure it’s not stopped up. If yours has one.
Very cool video my friend
Thanks for watching. Have a good one
Where do you add the hydraulic oil? I just got my 574 and I'm low on fluids. I've ordered the manual for it. Is it in the rear above the pto? Also any recommendations on hydraulic oil?
At the rear top between the lift arms. Big square nut. Thanks for watching. Have a good weekend
A little trick I always done to my 847 I toke a little coating of grease around the O ring same to help seal it up an hold it in place.
Thanks for watching. Good idea. I’ll try it. Have a good one
@@GerraldFarms yep back trucking tonight
Pretty tractor!
Thanks for watching and commenting
1/17/21 No hydraulics after draining fluid and replacing filter. "AIR LOCK" I assume. Had retired Case I H mechanic suggest running the tractor in neutral and cranking the steering wheel left and right repeatedly. Did this for a minute or two and got the hydraulics back.
Thanks for watching and commenting. I’ve had couple leak out the filter housing. If it leaks slow when off next time you start up it can keep put the air out the filter housing into the system.Keep us posted on on how it does. Have a good week
Now that was a good video and repair sir. Got to keep that hydraulic system serviced. Odd how a seal caused that issue. Was it just an O-ring for the canister? That cartridge and canister very similar to the JD 3020 that I have. 👍
Thanks for watching. I’m glad you enjoyed it. Yea there’s a o-ring that seals the canister . Have a good one
@@GerraldFarmsdoes all the hydraulic oil not spill out when u take off that housing, or does it not come out without the engine running and the hydraulic pump going thanks.
@@martymartin2894when you remove the housing only what oil is in it will spill. If you start it up it will pump all the oil out.
Great that, I have an old 784 that I only use once a year in Ireland for bringing home the turf or the peat as yee might call it, I've never changed hydraulic oil just topped up and so far no problems, but least I know now where the filter is and how to replace if necessary thanks.
Those darn O-rings gaskets!
Thanks for watching. Sometimes they are aggravating. Several old timers I know won’t change the seal ever time they change the filter. Because of having trouble with the O-ring. Have a good one
I have a 784 with the same symptoms. Hard to imagine that this is all it could be! I just got it and Im not even sure how to check the fluid as with the tractor off there is nothing on the stick. Someone told me I have to have it running. Comment?
Thanks for watching and commenting. It should be on the stick with the tractor off. If the seal leaks the oil out the housing every time you start it up as oil enters the housing it introduces air in the system. One way to see if the filter o ring is leaking is to let it set a couple days then loosen the filter housing. You should have a quart of hyd oil. If not the seal is letting it leak out.
Nice 574 glad you got it back a going. Sorry about tripod but at least it wasn't you up under the tractor. Take care
Thanks for watching. I bent the tripod back and it seems to work. Glad it wasn’t me under the wheel. Have a good one
The slightest deviation in a hydraulic system can make all the difference in the world
Thanks for watching. It seems like a little air can make a big difference. Have a good one
Where do you check the hydrolic oil? Does CV the transmission use the hydrolic reservoir
Thanks for watching and commenting. There’s a dip stick right behind your left foot. When your setting on the tractor. Everything on the 574 hydraulics uses the same fluid. Have a good one
@Jim when you fill it behind the seat, then check it with the dipstick behind the left floor board. Thanks for watching and commenting. Merry Christmas
Did you drain out all of the fuel before you removed the filter? Or does one not have to do that?
No you don’t have to drain it.
@@GerraldFarms ok. I have an -83 IH 585 and when I released the bolt to the hydraulic filter it felt like there was A LOT of oil coming out of there. I do not have any extra oil at home so I decided to put it back in again. But maybe it's normal to loose some oil when changing the hydraulic filter?
@@Dibulok i normally catch it to put back in if I don’t have more on hand. Just be careful with the o ring , it’s easy to not get it sealed and loose a lot of oil
@@GerraldFarms Ok Gerald, I'll try that then. Thanks :)
What kind of oil do you use if you need to fill up? I don't know what oil is in there now.
@@Dibulok I don’t play the name brand game. Any oil is better than no oil. Just what ever you can find local.
Do you have a video of a Hydraulic fluid change. I have an IH 2400a but I belive it is same setup except I have a backhoe on it. O need to know where to add fluid street I change it.
Thanks for watching and commenting. On my 574-464 you add Hyd oil behind the seat. Between the lift arms. A big plug you remove to add oil. I’m sure we have a video on it. We have over 600 videos. We do a Sunday night live hangout every Sunday night. 8:30 pm est. drop in if you get a min.
I'm going through something similar right now. Changed the filter in my 574 and now no hydraulics work at all. Not even after a few minutes. I've had that housing off 20 times I bet to try and get it to seal up. You think that since I'm not getting any hydraulic power at all that it could be something else? I've never had this much trouble with a hyd filter change.
Thanks for watching. I’ve got a few questions. Before you changed the filter was the Hyd working good? If not what was it doing? After you run it and let it sit does any oil drip from the filter housing? If any drips when you start it up it introduces that air back into the system. Let it sit for awhile with something clean under it so you can tell if it drips. If no drips after several hours try running it a little longer keep turning the wheel and working the lift up and down to move the air in the system. Keep us posted on what you find. Have a good one
@@GerraldFarms, everything was working good before the change. I had used it the week before to get the garden plowed up and it handled the 3 bottom like a boss. There's no oil that drips out of the housing when I let it sit. I'm worked the wheel and lift over and over again trying to get it to pick up but it just doesn't have any pressure. I have flow through the system because I can put remote ends on the remote lines and have flow out of them, just no pressure. I'm slightly concerned that I had a weak pump and it finally went out trying to prime back after the filter change but like I said...it handled that 3 bottom plow just fine the week prior.
I wouldn’t take the filter off any more for now. Every time you do you introduce more air. How’s the Hyd oil level? Send me a email Gerraldfarms @gmail.com
@@GerraldFarms email sent
cmrncrick if you found the solution I would like to know what it was, Thanks!
Good day Yea that filter is a buggar to put in. 1 comment about grease might help. We have alot of horse & buggy around us, got to fix something brought home , didn't use for a while oil all leak out of gasket. Thanks good video
Thanks for watching. I’m going to try the grease trick next time I change a hyd filter. Have a good one
Good video and good information to have, wish my problem could be that easy.
I have a case 595 that the 3 point will go up and down all day until I hook something up to it or just stand on the lower arms and then it will go up but not go back down. I can step off the lower arms and it goes down.
Anybody got any idea what would cause that?
Thanks for watching and commenting. I’ll ask around. If I find out something I’ll comment to you again. Have a good one
Nar’thn Jacky
Nice I’ll fix. Bet you was happy the tripod wasn’t you..
have a grand day sir
Thanks for watching. Yes sir. I never would have thought about it rolling. Have a good one
My first thought was a plugged hydraulic filter.
TFW. Stay safe. Have a good weekend. We do Sunday night live hangout every Sunday night 8:30 pm est. drop in if you get a chance.
My tractor Hydraulic is not working sir
Thanks for watching and commenting. Maybe you can find help fixing you tractor
We had a 464 n 674. The 464 would run circles around the 674, LOL.
Thanks for watching and commenting. Have a good one
IM not a mechanic but looks like a hydrophilic pump issue
oops spoke too soon
After I run it some more I’ll know if what I done fixed it.
Appears the hydraulics were sucking air from around the suspect oring.
Thanks for watching and commenting. Have a good weekend
Need a hydraulic cooler whatever it’s called mine is leaking from cracked tubes.
Thanks for watching and commenting.They have a Hyd cooler in front of the radiator . I use the other 574 to pull a 7ft disc mower all summer and a round Baler and have never had any issues with the hyd over heating.
@@GerraldFarms A buddy thinks it’s an oil cooler he rebuilds tractors in Kentucky.
Ok. Thanks
Well it’s definitely a hydraulic cooler as I have no control this morning 🤔
I changed my filter on my 454 and a bushing came out
Thanks for watching and commenting. I’m not sure what kinda bushing.
THat baby purrs like a kitten
Thanks for watching. It amazes me how some of the older equipment keeps on going. Have a good one
Well hot dang it Scooter ! , that tells me a whole of things , the hydraulic pump is Fucked , You need to buy a news pump .
Thanks for watching and commenting. I would have to disagree. That pump is still going strong. The seal that goes around the housing for the filter was leaking. When it set over night or days it would leak out the bowl. When you start it that air was introduced to the system. New o ring problem solved. That was a couple yrs ago and couple hounded hrs. I would not of believed it if I didn’t see it. Have a good one
@@GerraldFarms Cheers Bud
Sounds like a hydraulic filter needs changed.
Thanks for watching. We changed it,now everything is working good. Have a good weekend