I saw the g5 timer reveal about a month ago and everyone was complaining about it lol. I personally think it doesn't look very good, but the fact that you need to hold the reset and power button for a bit longer than normal to reduce accidental presses is a big upgrade. (referring to lazermonkey's video about timer resets at worlds 2017) We should probably use this in the WCA, but hopefully in 2pad mode not 4pad
main people who don't like the new timer are speedstackers. From what I've heard it is good for cubers, and bad for stackers especially with the ranking/record reset they have to go through.
@@LevelUpCewb the WSSA/Speedstacks could just use the same timer rules as the WCA (fingertips on the timer only). that would make things infinitely easier
Speedcubing mode is 2-pad so most likely it will be used in WCA. I don’t blame the cubing community if they end up accepting it since Cubers have much different needs for a timer than us Sport Stackers
I like the features, but I definitely would pick the g4 timer because it looks better in my opinion and it has the "save times" feature. I know most people don't use that, but I use it to save my pbs.
@@polofnbryt4khdfbmcpebutido968 You press save, then press the arrow as many times as you want to get it to save in whatever slot you want, then press save again, to save it.
Speed stacks should make another timer specifically for cubers with a design similar to the g4. The g5 looks ugly and has very little benefit to cubers (or to stackers for that matter).
For me being both a cuber amd stacker, I have mixed opinions on this which some things i like and some things I dont but I can understand what people are saying about certain aspects of this as well
speedstacks needs these: G4/G5 compatibility extensions (for old mats, not meant for competitions) (less wasteful and a better profit method) Adjustability (hand sizes, hand sizes) these 2 will make the timer much better.
I can see some problems with the slight delay in resetting the timer. Many judges will hit the button, thinking they reset when really they didn't, leading to a lot of E1s. I wouldn't mind the four pad function because I have seen a lot of questionable start/stops. People close to karate chopping or people starting with their fingers way extended out (their palms are on the pads but not any part of their fingers). I think it's inevitable that the WCA will use this since (I assume) the 4th generation times will stop being made, meaning new cubers or comp organizers would find the 4th generation timers harder to find.
I prefer the g5 Worst thing about it though is that its basically impossible to find a cable to link it to a computer that fits it lol. Because the plug is in a recessed area in the middle of it, its hard to find a cable with a slim enough sleeving around it to fit :S
Which timer do you think I should get as I have never used a proper timer before and I just wonder which you think is better and which you think I should be getting. Thanks in advance 🙂
when you started doing solves, I immediately said, "Oh, wow, he's using the X-Man Ambition." Do you really like it that much? Edit: Sorry not the Ambition, that's the 4x4, lol. I mean the Tornado.
Phil I have a question because I am going to buy cubes from the cubicle but my parents are wondering if there will be refunds for broken items or the items took so long to ship and would you email us to update about the cubes I am going to buy.
Yes, we have a pretty robust returns/exchange/refund policy: thecubicle.helpscoutdocs.com/collection/28-returns-and-exchanges. We do regularly communicate with customers and are always around to answer questions. If you have more specific inquiries, feel free to write to us at support@thecubicle.com
I actually kinda dobut that this will become comp legal due to the four pad setting. Anyone could turn it on without the solvers knowledge causing them to start solving without the timer starting or take too much inspection time having to turn it off if they only notice the four pad setting is on during inspection.
Mine doesn't work at all. Reset does not work. The only way to reset is to remove the batteries. Not very practical, plus it will always start in 4 pads mode.
imo WCA should legalize timers like YJ or QiYi. These are nearly unbreakable and look much better. Speedstacks gen4 is so defective and expensive. Gen5 probably will be as defective as gen4.
For me, I prefer the look of the G4, however, if the WCA says it's the new official timer/sanctioned by the WCA, then I'll get it.
Older stackmat timers are still allowed by WCA.
@@beranova. yes, I know, but this new one is not, that's my main reservation for not getting, most competitions will use the G4.
Ditto I agree
They will probably eventually switch because I am assuming that speed stacks will stop making G4, and the tech will break
@@kamranhussain2210 yeah, I feel like I'll have to switch eventually, but idk, I still like my g4, the one I have is only a year old anyhow so...
I really don't get why people say the G5 looks bad.
I actually really like it!
It looks strong and well rounded
I agree
@@Panda-sn1lgsame
This timer is not ugly, love it, it looks much better than the g4
This is probably the best review yet! Even though some don't like it, I like the smaller length and I believe that it might be easier to travel with.
Well it is a bit bigger
I saw the g5 timer reveal about a month ago and everyone was complaining about it lol. I personally think it doesn't look very good, but the fact that you need to hold the reset and power button for a bit longer than normal to reduce accidental presses is a big upgrade. (referring to lazermonkey's video about timer resets at worlds 2017) We should probably use this in the WCA, but hopefully in 2pad mode not 4pad
main people who don't like the new timer are speedstackers. From what I've heard it is good for cubers, and bad for stackers especially with the ranking/record reset they have to go through.
@@LevelUpCewb the WSSA/Speedstacks could just use the same timer rules as the WCA (fingertips on the timer only). that would make things infinitely easier
Speedcubing mode is 2-pad so most likely it will be used in WCA. I don’t blame the cubing community if they end up accepting it since Cubers have much different needs for a timer than us Sport Stackers
I like the features, but I definitely would pick the g4 timer because it looks better in my opinion and it has the "save times" feature. I know most people don't use that, but I use it to save my pbs.
How do you use it?
@@polofnbryt4khdfbmcpebutido968 You press save, then press the arrow as many times as you want to get it to save in whatever slot you want, then press save again, to save it.
I do the same thing which is why I have reservations about getting another timer also considering they are rather costly
@@woodle3742 tru there literally just a timer
This timer has really grown on me. I personally think it looks better than the G4.
Clearly a much-needed and timely upgrade, but still has lots of room for improvement in my opinion.
wonderful timing i just bought a g4
But G4 looks better anyways
unlucky champ
I’m going to order one tomorrow, so excited to see this video
I got mine today
@@Technoplane I'm considering getting one myself cause I'm a new speedcuber looking for a timer. Thoughts?
That cube sounds sooo good
Speed stacks should make another timer specifically for cubers with a design similar to the g4. The g5 looks ugly and has very little benefit to cubers (or to stackers for that matter).
it doesnt even benefit stackers lol, it slows them down
For me being both a cuber amd stacker, I have mixed opinions on this which some things i like and some things I dont but I can understand what people are saying about certain aspects of this as well
I like the look of the new one
speedstacks needs these:
G4/G5 compatibility extensions (for old mats, not meant for competitions) (less wasteful and a better profit method)
Adjustability (hand sizes, hand sizes)
these 2 will make the timer much better.
It seems like a nice timer but it looks kinda wierd and bulky
Don’t you have the smallest one though? That weird green one whose name I can’t remember.
Woahhhhh
The new timer looks dope!
The gan timer does the same thing costs similar, and looks way cooler than the G5
Hello Phil, I have 2 questions. 1st: does the G5 switch off after 10 minutes, like the G4, 2nd: does the G5 fit on the current mats?
Yes,no
Do you think that we will be using these timers in competitions anytime soon?
Idk maybe
good question
I think maybe from 1. January 2022
For sure
@@KWCuber Ayy look who it is 😂
Ah yes, no more timer resets. They have listened.
I literally just came from a video about the problems
I can see some problems with the slight delay in resetting the timer. Many judges will hit the button, thinking they reset when really they didn't, leading to a lot of E1s.
I wouldn't mind the four pad function because I have seen a lot of questionable start/stops. People close to karate chopping or people starting with their fingers way extended out (their palms are on the pads but not any part of their fingers).
I think it's inevitable that the WCA will use this since (I assume) the 4th generation times will stop being made, meaning new cubers or comp organizers would find the 4th generation timers harder to find.
I think that the 4-pad mode can be a good choice for oh
Wow. Cubicle CEO!
I love the g5 it's underated
It broke in under 12 hours of having it I only used it like 10 times
I am wondering which 7 by 7 to buy from your website, the yj mgc, or the yj yufu v2m which do you recommend if I'm trying to save money?
mgc is better imo
@@samguzman9560 ik but its my first 7 by 7 and I wanna save money
Umm depends. If you gonna practice 7x7 a LOT then the MGC. But if you just wanna know how to solve it, the Yufu
@@kimyeguk I agree with cube central. I didn't take into consideration what level you're at.
@@Jo3shi9h thanks, I think I will prolly get the mgc bc I really like the 6 by 6 , but im not sure yet
thank you so much you helped me fiure out how I could change it
Also this looks pretty cool
The Best timer!😊
For comptions, g5 I like but just normal cubing at home I prefer g4.
I prefer the g5
Worst thing about it though is that its basically impossible to find a cable to link it to a computer that fits it lol. Because the plug is in a recessed area in the middle of it, its hard to find a cable with a slim enough sleeving around it to fit :S
In my opinion, it doesn't really make sense and I would prefer the g4 or Gan over this
I saw this on the website and I thought it looked pretty cool. Idk if I’ll get one for myself.
I’ve never had the G4, and I’ve been looking for a timer recently, so I think I’m going to order this one just to stay on top lol 😂
Same situation here, how does a G5 timer preform
The record reset is the dumbest thing
Edit-The WSSA not the WCA
Double edit-Where's those save buttons?
They don't have the save buttons. :(
Yes... Resetting Records for Stackers (among other things) is the straw that broke the camel's back.
@@thesphyrth Haha. That's why I use the g4 timer.
It's WCA...
Eid Mubarak!
Eid Mubarak bhaijaan 🙂🙂🙂
@@MasterPriyanshu Eid Mubarak!
@@asadcubing Eid Mubarak!
@@hamzaabbaszaidi8788 Eid Mubarak!
How big is the mat
Which timer do you think I should get as I have never used a proper timer before and I just wonder which you think is better and which you think I should be getting.
Thanks in advance 🙂
*Features are good*
*Don't dare to think about the looks*
How can i get the old one without spending 72$
When will stardust be available
when you started doing solves, I immediately said, "Oh, wow, he's using the X-Man Ambition." Do you really like it that much?
Edit: Sorry not the Ambition, that's the 4x4, lol. I mean the Tornado.
From your opinion is this better than g4?
I kinda don't like how big the hand pad. If the pads are the same length as the G4, I don't mind. But they're shorter.
Hi, can I ask you which rubiks cube is the best/fastest that you use? I want to get it for my son but there are so many. Thank you!!
Tanks for you opinion
Does it work with the G4 Mat?
no
How do you know? Its not like you have one.
It does not.
I'm in such a bad position I wanna buy my first timer which one do I buy g4 or g5
G5
G 5
Do solves using 4 pad mode
What’s the cube used in the solves part?
X man tornado v2
@@Ab_obla and tengyun v1 for oh
I'm honestly going to wait till they make a smaller mat like the one for the G4 cause it's just better for me
I'm fine with the Manta Ray Shape.
Looking at how Phil uses the timer, the thumbpads look awkward for people with big hands.
yes, I have really small hands
5:45 So true
Phil I have a question because I am going to buy cubes from the cubicle but my parents are wondering if there will be refunds for broken items or the items took so long to ship and would you email us to update about the cubes I am going to buy.
Probably yes but not sure
I recommend contacting thecubicle customer service by email
@@shivambansal42 ok thx
Yes, we have a pretty robust returns/exchange/refund policy: thecubicle.helpscoutdocs.com/collection/28-returns-and-exchanges. We do regularly communicate with customers and are always around to answer questions.
If you have more specific inquiries, feel free to write to us at support@thecubicle.com
@@asmallkitten ok thx Phil 😊
At first i dont liked it but Now I'm comfortable with the looks
Can y’all make skins for the g5 please
Reset and power button still in bad spots...
Looks weird but cool!
Edit: Do you think it’ll be used at worlds?
i wish not
Why not
There won't be any reset issues and also the the pad is actually bigger than the g4
Kind of stubborn to not use G5 timer because it doesn't look as aesthetically pleasing with all the new better features.
Great timing
Looks awesome!!
I actually kinda dobut that this will become comp legal due to the four pad setting. Anyone could turn it on without the solvers knowledge causing them to start solving without the timer starting or take too much inspection time having to turn it off if they only notice the four pad setting is on during inspection.
Mine doesn't work at all. Reset does not work. The only way to reset is to remove the batteries. Not very practical, plus it will always start in 4 pads mode.
imo WCA should legalize timers like YJ or QiYi. These are nearly unbreakable and look much better. Speedstacks gen4 is so defective and expensive. Gen5 probably will be as defective as gen4.
YES!!
Hi Phil
Cool!
Sad to see it not have bluetooth
I’d like to know if the timer plugged in when using cstimer will glitch out like the gen 4 that i experience
He sounds like j perm,or is he?
I got it for Christmas
So, Cubehead should test this.😂
ah yes another timer vs wall video
Very poggers
I’m fine with it as long as they don’t use 4-pad
7:12 x-man tornado v2
Idk why but Cube timers look really cheap even though they are pretty costly...
I hope it becomes legal. I really really like it
Thank god it has 2 pad mode
if it is better make a mat for it
I want a timer with Bluetooth to connect to mobile, and recharge one. Why any company can't make this, it is not a rocket science 😂
StackMat Pro G5
Gan halo timer is the best
Earlyest I've ever been
Tes 100 percent
Hey love cubing
ngl it looks kind of weird but I mean if it works it works lol
🙏:✝️:ROMANS 1:16✝️FOR I IM NOT ASHAMED OF THE GOSPEL OF GOD FOR IT IS THE POWER OF GOD FOR SALVATION TO EVERYONE WHO BELIEVES.
Gan timer > G5 timer
lol this made my day
I think G4 is better.
Are you phhil yuu
Said by cubehead
Too bad its not WCA allowed
Can you guys go back to the old intro... It was better
Can this be hooked up to the Speed Stacks Tournament Display Pro (TD Pro)?
Ahhh for cubing this isn’t bad but for stacking it SUCKS
The rumours are true...
Give me 30 bucks and I will buy you the set (jk) but it actually cost 30 bucks in China though
0.5 second hold = nice
looks = sucks
Chonky boi
Anyone else think it looks kinda like a toblerone?
Sorry, I'll go now
Yo don’t hit de poor timer:(