ฝัง
- เผยแพร่เมื่อ 5 ก.พ. 2025
- Please watch: "DIY: Installing a LOFRANS X2 anchor windlass on your boat #lofrans #windlass"
• Video -~-
Hallberg Rassy 312 "Ellös" - Sea4See: The restoring project (DIY SAILBOAT)
Good morning everyone for you the brand new fresh episode of the series "Restoring an Hallberg Rassy 312". A job that I absolutely had to have a look inside the rudder stuffing box and change the braid ..Andrea an expert in this 40 years who changes braids in the rudder stuffing box.. he did all the work excellent result no more water enter!!happy!!
If you like my video, leave THUMB UP and happy to get your comments I will reply to you!
A hug Gabriele
➡️Many thanks to Toptech Solution and Franco for his immense support and sponsor me:
www.toptech.it/
➡️Many thank to Stefano Moretti & Luca Caironi of Lineastem for support and sponsor me, if you need a new teak deck do not hesitate to get in contact ,they have excellent prices and professionalism at the top, here the website link and contact infos:
stemnautica.it/...
➡️Many thanks to Ennio Prase owner of Prase Media Technologies distributes products for the audio, video and digital signage sectors in Italy include Shure Mics and many other top products, check it out..
www.prase.it/
➡️Thanks for support me and my project also to:
Joakim of Batsystem for light and electric stuff:
www.batsystem.s...
➡️Many Thanks to Stefano Finco owner of Armare Ropes and Tiziano, among the leading companies in the sector of nautical ropes, offering a comprehensive range of technologically advanced products.check it out!!
www.armare.it/en/
➡️For epoxy resin and all stuff related Mr. Marco Cecchi, a master of knowledge and best products around!!
www.cecchi.it/
➡️For all related to sanding... the best products around check it out:
www.siaabrasiv....
➡️For spare parts for my Hallberg Rassy... thank to Ludwig at Hallberg rassy Parts!
www.hr-parts.com/
➡️And off course many thank to Marco Potente, to give the permission to use his music in my videos. He is probably one of the most talented musician and producer 🎸 !!.
I will forward the website where you can download the tracks for your videos or project. Stay tuned!
audiojungle.ne....
------------------------------------------------------------------------------------------------------------
➡️ About ®Sea4See - Official: Sea4See ⛵ was created with an aim to share my sailing life experiences and knowledge, especially restructuring sailboats. In my youth I worked in a factory where they built kayaks made by fiberglass so.. learn a lot regarding. In my off days from work, I have worked for a long time in a shipyard, further benefiting my knowledge and enhancing my sailing, boat maintenance skills. Today through my sailing vlogs on TH-cam, I want to share my sailing stories, sailing lifestyle videos, sailing adventure with all of you. I love working on boats because i belive that all boats have a soul...
More info...www.sea4see.org....
➡️ About Gabriele: Hello friends my name is Gabriele and I am an offshore Yachtmaster. A yachtsman who is passionate about everything related to the sea and sailing lifestyle. After having sailed in the various seas of the world, I bought my first boat and then refit her and later I left for a sabbatical year sailing through the islands of the Mediterranean. I am passionate about DIY in sailing boats and now after selling Dreamer which was my first boat, I am restoring "Ellös" a Hallberg - Rassy 312 that will take me back to the seas of the world..
Read more about me www.sea4see.org...
➡️ About My Boats: The Hallberg - Rassy 312 was built for fifteen years between 1979 and 1993. Totally 690 boats were built during this time period. The HR 312 was a very popular model. Until 1986 the Hallberg - Rassy 312 Mark I was built, with the portlights in the blue stripe in the hull and with or without quarter berth. Models without quarter berth had an extra cockpit locker on starboard.
Read More..www.sea4see.org....
___
⛵ Important Links ⛵
___
☑ Subscribe ®Sea4See - Official on TH-cam: bit.ly/Sea4See-...
☑ Follow ®Sea4See - Official on Facebook: bit.ly/Sea4See-...
☑ Visit ®Sea4See - Official Website: www.sea4see.org/
☑ Follow ®Sea4See - Official on Twitter / sea4see1
☑ Follow ®Sea4See - Official on Instagram / sea4see
☑ Join ®Sea4See - Official Affiliate program www.tubebuddy....
#Sea4See
#Sailing
#SailingVlogs
#SailingLifestyle
#SailingAdvantures
#SailingChannel
#SailingVideos
#SailingLifeVideos
#SailingVideoTH-cam
Category
People & Blogs
No substitute for perfect. Perfect!
Ciao Bruce! How are you over there? Thx for your comment make me happy! Take care!
sea4see -2 degrees F with crunchy frozen snow and ice on the ground. My home is warm, my cars start, my BMW motorcycle is put away for the winter, and most of my work is done in doors. However, it is easy to feel cold this time of year in the Upper Midwest of the USA. Seeing you working on your boat, dreaming about sailing the Mediterranean on warm summer days, keeps my heart warm despite the cold. Enjoy very much your channel and also the quality of boats you choose to refit and how properly you do repairs.
Bruce Kratky uh hi quite cold over there! But in case you always could come in the med and enjoy the summer hot weather💪🏻
Gabriele your english is wonderful and you do not need to talk a lot because the boat and your work is so beautiful! I enjoy your videos very much and look forward to the new ones. Thank you, Ben S/V Dawn
Ah ah ah thx a lot Ben! Appreciate your support! Soon another video! Take care !👍🏻
Many new things! Like someone else said, graphics, intro and exit design and a longer episode than usual. But there was very much to learn as well. What I learn most is how you do such good, high quality work! When I do repairs on my boat I do just enough to fix the problem - it doesn't have to look pretty. But you inspire me to do better, so thank you. As has been said already, your sailboat will be much better than new when you are done! Scott W
Thx a lot Scott!!! My aim is make work on the boat and avoid to come back later.. too boring I already make this error in my previous boat... so here we are! Thx for you kind words! Take care!
Gabriel - I really enjoyed this video, you are making superb progress and doing a beautiful job. You should have asked George Harrison to cut two spare lengths of packing while he had all the stuff in front of him - these spares could be stored in a ziplock bag and taped to the rudder shaft at a convenient point. I bet you slept like a dead man after that marathon session.😀👍⛵️
Norman ah ah ah you smart!!! Yes I will do for sure!! Thx for idea!!! I slept well with one aspirin for pain in the back....😱
the longer the better. thanks so much, i saw some things i have not done and will know how to do .
Hey Brown! Thx for you comment happy you see how to do ... I learn too😜
Caspita che bel lavoro. The devil is in the detail. Complimenti ancora.
Ah ah ah bella questa! Grazie!!!👍🏻
+Georges Bonello DuPuis hey George! May i contact you by mail?
sea4see yes of course.
sea4see info@airtoursmalta.com
+356 99493909 cellulare
Beautiful work throughout.. very lucky to have the boat under cover 👍
Yes Justin this is really true!
Ahh man, I could almost taste that fresh pasta and that cheese. The smell must have bin incredible. I bet that was awesome. Made me hungry. And you didn't get a parking ticket!!! Very cool.
Yes pasta was quite good I always ask for double rations... need energy for work🤣🤣🤣🤣
Bravi. Very good job!
+Roberto Cantone thx Roberto appreciate!💪🏻
Damn... I'd be afraid to sail it! By the time you're done it'll be fit for the HR Museum! Just beautiful.
Thx friend!!! I will sail it soon!!!😁
I like the new graphic intro and outro. Good job! "Ellös" is really coming together wonderfully.
Yes Paul become more finish day after day... but still many things to do!!!
Lots of progress, coming along very nicely... ☺
Yes quite well!! But still need to do!!!
Use a small socket when tightening hose clamps/jubilee clips. Saves shoving the screwdriver through your palm if you slip. You are not repairing that boat, you are re-manufacturing it, superb.
Yes John true!! I Wacom hurry bit hurry sometimes hurt🤪 thx for advise!!
Great workmanship by both of you, well done, getting close to a wet bottom,
Thx Antony appreciate! Hope to get wet bottom soon!!!
Superbe !!!!
Merci pour ce partage, quel travail !!! 💪💪
Bon vent ...⛵️
Thx a lot merci!!! 👍🏻💪🏻💪🏻💪🏻
Pretty sure it is not called a stuffing box in english, more like axle seal. But as a Norwegian I perfectly understand what you mean, we have the exact same translation into english :) Love your channel and Ellös is an awesome vessel and your and Andreas work are so inspiring!
Had to Google stuffing box and today I learned that it is the correct term for this kind of axle seal. Now I knows :)
Thx friend I goggle it too..🤣🤣 have a great holidays
@@everythingexplained I've usually heard it as "fucking stuffing box", as in: "my fucking stuffing box is leaking..." Cheers!
True!!!!😂😂😂😂
Very high quality work, bravo!
Grazie mille!!!!🙏🏻
Perfect job like the original!!
Will be for sure or... better!🎄
Long episode but enjoyable
Thx sometimes need to be
great job - its definitely coming together. Nice job!
Thx Christian!!!
Thank you Gabrielle!
👍🏻💪🏻👍🏻💪🏻
Nextttttt..... The engine...yahooooo
Uh uh uh... you will see!!’
Job done -perfect!
🤣🤣🤣job done perfect!! Need to make a tee shirt....
Sometimes these modern synthetics like the stuffing cord are much better than the old, which remind me of planking caulk on wooden boats. But some traditional things cannot be improved.....like your plate of pasta....now we go off to eat!
We discuss with Andrea regarding this! He still prefers the old ones grease and stitch... I go with new ones! But pasta is pasta!!!!🤣
Bellissimo - if that’s the correct word 👌⛵️🇨🇦
Thx ken! You know Italian! Great pal!!!
What is the adjustment knob below the stuffing box for?
Grease box!!! You turn the knob you send more grease on the rudders system
@@sea4see Thank you, thats good to know! I just replaced the lower pintle on my HR312, not a fun job. I will add more grease now, thanks.
Nice job sogn you need A haircut😊
Ah ah ah and a new hair transplant!!!! Thx pal!🖐