By far ..THE BEST VIDEO at explaining the subject at hand..what sets this video apart is the VISUAL AID/VISUAL REFERENCE that allows the viewer to get a good look at what is being explained without which it is a bit challenging to picture in your head (Spatial Dimensional Awareness)...Bravo Zulu brother..
I have a 2003 mustang GT. I have a rear end from a 1996 which is about 3/4" narrower per side. I have a 15x10 with 6.5" backspace and it fits a 275 60 15 perfect.
Im just thinking out loud i have 2007 honda accord pearl gray i want all tires sticking out just enough so it looks proper is negative offest the choice and any tips
So, will your SVE SC 17X9 5 lug wheels work on a fox body with sn95 spindles? Which just rack limiters etc needed on the 4 lug? I noticed the spacing is different. However, I’m terrible with geometry. Thanks.
Yes, the 17x9" 5-lug SC-style wheels will fit a Fox Mustang with SN95 spindles. Rack limiters will be needed and more than likely you'll also have to clearance the inner fender splash shield. We have a separate video on that. I'll link it below. As far as the wheel specs are concerned, the 4-lug SC-style wheel has a +20mm offset to clear a Fox Body grease cap. That's why you see the small difference between the 17x9" 4-lug and 5-lug wheels. th-cam.com/video/tkJ2toimkJ8/w-d-xo.html
Hey there. I want to ask you. My factory wheels have the following size. 7,5x17 et 25 6x139,7 bore center 106,1. I want to buy new wheels. The size that is close to my factory size is 8x17 et 20 6x139,7 bore center 106.1. My question is will it fits or will I have an issue. Thank you in advance for your help.
Hey there, it depends on the kind of car you are wanting to install the new wheels on. We specialize in the Mustang and SVT Lightning. If you have any questions or concerns about another vehicle, we recommend checking out some forums or contacting other owners that have a similar spec to compare.
You have to know what the measurements of your cars hub to fender and then find a rim that will fit using the info given in the video or you will be trying on different rims til the cows come home.
*Spoke design was left out. Which is very important with wheel fitment and should be included into the fundamentals of "wheel clearance and appearance"*
I think we can all say the same thing. We just want an answer. However, it doesn't always work that way, so it's good to understand these concepts. -Landan
Nice concise simple explanation! No wasted blah, blah! Great job!
Thanks! -Landan
Even if you thought you knew…a review never hurts!
Glad you enjoyed the video! Let us know of any other ideas you would like to see from us! - Jay
Hands down the best video to date on TH-cam about this subject. You couldn't do any better!
By far ..THE BEST VIDEO at explaining the subject at hand..what sets this video apart is the VISUAL AID/VISUAL REFERENCE that allows the viewer to get a good look at what is being explained without which it is a bit challenging to picture in your head (Spatial Dimensional Awareness)...Bravo Zulu brother..
Thank you for the great feedback! -Landan
I have a 2003 mustang GT. I have a rear end from a 1996 which is about 3/4" narrower per side. I have a 15x10 with 6.5" backspace and it fits a 275 60 15 perfect.
Great breakdown 🤘
Glad you liked it! - Jay
Great breakdown Landon. 👌
good information:) thankyou! btw...what happened to JMAC??
I have wanted to know that for a long time as well.
JMAC still works for us here at LMR. He is currently a part of our Product Development team. - Jay
Im just thinking out loud i have 2007 honda accord pearl gray i want all tires sticking out just enough so it looks proper is negative offest the choice and any tips
We don't deal with Honda aftermarket support. We recommend checking out some Honda specific forums and Facebook groups for more info.
I always found having back spacing and offset to be redundant. They lead to the same result with two different ways of measurement.
So, will your SVE SC 17X9 5 lug wheels work on a fox body with sn95 spindles? Which just rack limiters etc needed on the 4 lug? I noticed the spacing is different. However, I’m terrible with geometry.
Thanks.
Yes, the 17x9" 5-lug SC-style wheels will fit a Fox Mustang with SN95 spindles. Rack limiters will be needed and more than likely you'll also have to clearance the inner fender splash shield. We have a separate video on that. I'll link it below.
As far as the wheel specs are concerned, the 4-lug SC-style wheel has a +20mm offset to clear a Fox Body grease cap. That's why you see the small difference between the 17x9" 4-lug and 5-lug wheels.
th-cam.com/video/tkJ2toimkJ8/w-d-xo.html
@@latemodelrestoration thank you.
Hey there. I want to ask you. My factory wheels have the following size. 7,5x17 et 25 6x139,7 bore center 106,1. I want to buy new wheels. The size that is close to my factory size is 8x17 et 20 6x139,7 bore center 106.1.
My question is will it fits or will I have an issue.
Thank you in advance for your help.
Hey there, it depends on the kind of car you are wanting to install the new wheels on. We specialize in the Mustang and SVT Lightning. If you have any questions or concerns about another vehicle, we recommend checking out some forums or contacting other owners that have a similar spec to compare.
For gt Stang. 2016
excellent !!
So to make the tire and rim flush with the car.. negative off set
You have to know what the measurements of your cars hub to fender and then find a rim that will fit using the info given in the video or you will be trying on different rims til the cows come home.
*Spoke design was left out. Which is very important with wheel fitment and should be included into the fundamentals of "wheel clearance and appearance"*
Don’t forget about wheel diameter.
All I want to know is it it will fit. Don't give a shit about these stupid concepts.
I think we can all say the same thing. We just want an answer. However, it doesn't always work that way, so it's good to understand these concepts. -Landan