2015 - 2023 VW Passat Amp and Sub Install
ฝัง
- เผยแพร่เมื่อ 13 ก.ย. 2021
- Parts used linked in the description below!
Watch a full tutorial as a 2020 Volkswagen Passat will have a 12" Rockford Fosgate subwoofer and amplifier installed. We will be using the stock radio and integrating it with a line-out converter providing signal to the amplifier without use of an aftermarket radio.
For a better video on how to wire in your line out converter, see this Tiguan video: • 2009 - 2015 VW Tiguan ...
This video applies to VW Passat models for years 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, and 2023. This video also includes dash trim removal, complete amplifier wiring instructions, complete installation, and testing.
If you have any questions, leave a comment below! Be sure to like and subscribe!
Parts used in this install (Amazon Associate Paid Links):
*Power Acoustik LFA2-2600 Bass Amplifier (Discontinued)
--Recommended Amplifier: amzn.to/3qz3k73
*Rockford Fosgate 12" P3 Loaded Subwoofer Enclosure: amzn.to/3Aes9sW
*Amplifier Wiring Kit: amzn.to/34QaiuB
*Scosche Line Out Converter: amzn.to/35G3tw4
--Recommended line out Converter AudioControl LC2i: amzn.to/3enXbWm
Disclosure: As an Amazon Associate I earn from qualifying purchases - ยานยนต์และพาหนะ
Parts used linked in the description of the video!
I’ve been watching this video for two days and it’s clear and concise I am going to use this when installing my subs tomorrow 🙏
How’d it go man
Thank you soo much bro just saved me some money because knowni see where to run my power wire
Thanks for helping me not pullout the radio. I’ve been wondering where to tap for signal and never even thought pulling the pillar. Thanks
That is one nice h-low converter with remote wire. :)
Thank you! Good video. EU Passat TDI B8 2015 rear speaker wire was blue-black(thin) and white-black(thin)
Thank you
GTE 2015 got same colors as yours.
2021 vw jetta for me it was a bit different but got it working thank you
Finally found a helpful video!! 2 questions: 1) when robbing power and ground for the line converter, does the amplified power on and off with the ignition? 2) do you know the left channel and right channel colors in a 2013 Passat?
How did you remove the OBD2 on the panel?
I have a 2016 b7 wv passat i cane use the same instalation like you do it?
Ok question when you ran the speaker wire across how exactly did you wire for speaker wires into one line out converter that’s what I’m confused on. How exactly did you do that?
How did you get the coin holder back on? I got it out and it won’t go in. Any tricks. Thanks
Okay so I did everything just the speaker wires were different colors all were correct except the passenger side purple wire. Mine was purple and white. After I connected it I turned everything on and the sub just had a beep sound
Are the rear speaker wire colors the same for a 2021 Jetta? I dont want to risk breaking any clips at the dash for a converter so id rather use rear speaker wires to tap
How’d you get the back seat out? Skips right over that part
I have a LC2i converter do I hook it up the same way.
Is the 2012 have the same wiring for the converter?
Would the install be the same for a 2015 cc?
I have a 2012 Passat what color wire o have to tap into on the driver side .
Where did you get the yellow wire ?
Would it work on a 2013 jetta vw?
What abouth if on bouth site is the same color
Can you control the sub woofer output/level from the factory radio controls?
If you tap a factory sub yes or aftermarket deck
Thanks for the video. Is this the same for right hand drive Passat?
no unfortunately. I'm still trying to find somewhere for the cable to go :(
This line out converter comes with a bass control know and so does my amp, should I connect it to the LOC or my amp?
Line out put converter
Where do we get the converter thing in which left and right speakers wire goes and got output for amplifier
Parts linked in the description of the video
What about a 2012 Vw Passat
Does this work on 2014 passat?
Do you know if it would be the same type of deal with a 2008 Passat? Cause I’m tryna find an install for it and struggling and this was a solid video 😂
Same issue I’m having for a 2012 Passat
@@codydillon824 I have a 2013 passat with a full install
@@dvickers30 How did you do?
@@assistancekarenmarkaryd9594 What part do you need help with?
Hey mate, how did you find the soeaker wires on that 2012 passat
How much do you charge for this ??
Hey bro. Where do you put power cable to your line output converter? Can I just use power from amp to connect to line output converter and then transfer it to amp so it has the power ?
He ran it from the amp power and ground to the converter, it’s in the video
No you can’t do that though he did. 🤷♂️ You need a fuse beside the amp to protect the line converter cable. 5A would be fine.
Whats the difference for the 2013 Passat or is there any difference at all?
Was wondering the same thing
Where did you connect remote wire?
I believe to the remote terminal on the amplifier. Sound signal tells the converter to turn on the amp via the remote wire.
Did you wire it in without removing the factory sterio?
You can tap into either the B piller wiring ocnnections, or pull the radio and make connections there. This video provides more detail: th-cam.com/video/wggghmRk1_Y/w-d-xo.htmlfeature=shared
I have a 2022 Jetta do I have to tear apart my dash? Or can i tap into the speakers like you did here?
You can tap into the rear speakers as long as your trim level provides a full range signal to your rear speakers (like ours did).
@@ProvoBeastAudio your videos are very helpful thanks!
My 2018 Passat don’t have the same colors of wire. I don’t have these colors. Shall I go for the twisted pair?
Did this work??
For the love of God do not tap into random wires. The last thing you want to do is tap into airbag wires
@@coltinanderson811 Yes it did.
@@coreyhudson3484 The wire is passed the B pillar from the front. Shouldnt be the Airbags.
Did you use 2 line converters?
Nope just one.
My Passat is 2014 does this method still work
very similar technique, yes.
I have a 2021 Passat and am starting to design my stereo upgrade. I can not find a wiring diagram anywhere. Do you have a link to the factory radio (base radio, not fender upgrade) wiring diagram? my first step will be adding a LOC/DSP, amp, and front mids & tweets.
secondarily, is upgrading to an aftermarket head unit possible or is there a bunch of other functions tied to the factory radio making it a PITA?
i also have a 2021 but has the fender package.. can't find much on these cars so far.. i'm installing my subs right now, let me know sizes of the front and front deck speakers.. even with the fender mids and highs they sound blah
@i5aactraffic745 where the amp located?? I'm about ready to install my system myself
@@i5aactraffic745What did you end up installing?
@@atate23did you end up installing your system?
9:40 for my reference on tapping into the audio for line out converter.
Thanks imma use it soon too :P
@@zyixzit was the wrong cables for the 2016 Passat
Does this car have rear deck speakers?
No it doesn’t
Hey man I’m on the drivers side and I see yellow and red it pretty thick but it’s not twisted and the brown and yellow is really thin it’s for a 2017 Passat r line
I have the same exact car how did your installation go
same here, confused with the passenger side with which wires to connect to
update, i tapped into those wires and it seems to be the lane sensors, so i would ask for guidance through an audio shop
l
Those wire diagrams are for VW Passat which already has a sound system like Fender. If your car doesn't have Fender, then you need wiring diagrams No 19/3 and 19/4. Left rear bass speaker cable colors are brown/white(-) and red/white(+) and the right rear bass speaker cable color are brown/lilac(-) and red/lilac(+). Note: This is for VW Passat with cell phone/telephone prep. I hope this also helps.
@@carlosgraphic I have a twisted Red/White and Brown/White on driver side on my 2013 Passat but they’re thicker than the rest of the wires. Do I tap those?
Thanks man great video! Also first comment!
Will this work for a 2014 Passat TDI?
very similar technique yes (even though it's the previous generation)
@@ProvoBeastAudio is the wire colors and location similar?
It will work for a B8 model. B8 first released in 2014 but maybe the was only in Europe.
Ok I have 2010 vw cc help me please took car to geek squad and car has not started ever since I’ve put three new batteries new starter as well as fuel pump and ,in hooked amp n dub car still not starting car got towed home from geek squad now I have to sue for damages please help what is the proper way for make n model VW cc 2010 turbo 2.0
Sounds like they tapped the ECM with a positive battery cable during install. If you are careless while connecting a fuse block under the hood it’s easy to do. Happens more often than you would expect. Look at the cars computer for any discoloration or marks.
Ands how much to repair just ball park figure
@@andreajohnson7431 Sorry I just saw this question, the ECM is around $800 plus programming at the dealership. Make sure to have it properly diagnosed first. Should be about an hour of labor, $100-$150 is average at a VW dealership.
9:18 be careful, below that metal is the fuel tank and it is very close on that part.
Correct. There will be other bolts accessible in the trunk to use. Always are. No need to drill any new holes. He also said he used a nut and bolt but didn’t say anything about going under the car to attach the bolt. 🤷♂️
@@johnacarnduff The gas tank is mostly everywhere under the rear seat and a little on the trunk. I don't think he put down the tank just for a bolt.
You shouldn't have to use both sides , if it's mono block
are you sure ?
Using 1 side will result in lower volume level, as well as 1 side of bass. Mono combines left and right channels into 1 so you get the full dimension of bass. I have personally tested this and 2 channels into a mono amp is the better option.
@@anothey93they are connected Internally. They put two outputs for easy set up .
That’s where I got confused when he wired to both sides and ran the one side across to the line out? That’s where he lost me. But very good other that that small important detail.
So you run the ground for remote turn on to the amp?
Looks very neat but also looks like VW's are a pain in the arse.
Too much complicated