Be very careful running those spectre air filters. They have a chrome center guard or beauty ring that is glued on essentially and can get sucked into your blower. Save yourself the headache and get a closed off k and n or a turbo gaurd.
Highly recommend on3 performance stainless mesh air filter I have it on my on3 turbo really awesome quality. I’ve seen those specter ones get sucked in and mess up a turbo before
For the IAT sensor if your charge piping is thick enough you can drill and tap it, i believe you need a 3/8" NPT tap for it. Also do your self a favor and delete the EGR and DPFE sensor, you don't need that stuff to make power and it will help clean up the engine bay by removing some vacuum lines and also the sensors themselves. And like others have said, get rid of that cheap air filter and get a turbo guard.
Oh and it also needs to be after the mass air flow sensor cuz the mass air flow sensor is what heats the air that little sensor you have just monitors the air and tells the computer whether or not if it needs to cool the temp down or heat it up
Id say yes. Easy to work on, parts are cheap, lots of room for error, and lots of people have worked on them. So lots of info, tips, custom parts etc. Its a great first project car
For your iat i run the same thing on my 2.3t in my fox and as long as you have it mounted at the front of the car where fresh air comes in it will work the same doesnt always mean you need to have it mounted on your piping
my r33 has been big turboed and has a brand new clutch/flywheel setup. im soo impatient to get it broken in and tuned 🚀 so watching your car get tuned makes me so excited for what is to come with my project 🤘
That air temperature sensor was supposed to come with a rubber grommet and you would simply drill a hole on your intake between the filter and throttle body and the grommet will hold it in the hole
Sct ba5000 is what I'm running for a 05 up car. Vmp makes one..... almost went vmp but, anyhow yea. And a pig tail conversion made by jms I think. I'm sure vmp will know
I said it on Facebook but will say it again here. Javi from Droppin Gearz seen almost 40hp on his paxton s550 going from a cone filter to the filter guard.
Derek quick question do you ever run your stangs? Like dude it would be sick to see you on some 1320 vids or some tx2k vids running them dudes down your cars have the potential.
@@DerekBaranProductions yeah theres 2 one powers the vents and one goes to egr i had a leak in one of them on my 04 the ac was stuck on defrost til i got it fixed
Drill hole put rubber grommet and push it in to hole good to go just needs to see air in pipe I have one on my Jeep moved from intake manifold to intake tube
Don’t use Spectre air filters on the supercharger...They’re made terribly and have a very possible chance of getting sucked into the compressor wheel and possibly further. Wouldn’t wanna see the 2V inhale scrap lol
hey guys, i been having this stalling issue with my 2000 mustang gt, i've tried a couple things but cant figure it out. anyone got a good forum or site for issues like this?
My 04 screaming yellow Mach1 did the same a few years back. The sad part is it had been sitting all winter and I had just pulled it out for the spring service so that it was ready to go for warmer weather. It ended up being a bad fuel pump. It had no codes to check and no cel when it happened so diagnosing took a bit longer then just scanning for codes. When I first started it, it started right up then died. It never really ran for more than 30 seconds at a time and struggled to do that.
@@DerekBaranProductions the car starts fine and sounds healthy and will run for about 20 minutes the first start of the day but will stall. It seems to be stalling when the radiator fan kicks on. There isnt an engine code, there was one for a bad iac which I replaced and now the check engine light is gone, but the car still stalls.
@@josesarabia1549 yessir. Cause he’s always wanted a termi and plans on gettin one in the future. But even then, that’ll mean that he’ll lose his iconic car once again. It would be a tricky situation for him.
@@JoseDiaz-bk9mhnobody in their right mind would trade a termi for blue when mine gets boosted it will smoke blue2v them high rpms I can do 80 in second now
@@therealjoker4207 I know. I’m sayin that even at that, he probably still wouldn’t trade. Either way no one else would give him that offer cause it’s a loss on their end. But for yours, he wouldn’t trade cause it’s a loss on his end. He would smoke you rn. But not if yours is boosted, which it isn’t. And you can’t boost yours if you trade it. So boosting yours is irrelevant and idk why you even brought it up again. Don’t reply to me if you’re not gonna make sense.
Find another filter, they are not rated for boost and the center metal piece on the end of the filter will suck through and destroy anything. Just a heads up please find another one...
Yeah man no problem I would prefer you not running to an issue and destroy I mean we do a lot of more high boost stuff likeI mean we do a lot of more high boost stuff like diesel wise but they're just not meant for boost because it sucks that centerpiece out and it'll go through the propeller and you don't want no foreign objects in there. But keep up the good work I was down your way 2 days ago down in Richmond looking at a Terminator but it wasn't quite what I thought it was going to be.
Remove the cold side charge pipe and take that and the IAT to a trusted exhaust shop. They can weld a bung into charge pipe so that you can install your sensor.
That tube from the rocket cover should probably go to a oil filter. Since the small filter will become oily and will prevent the air eventually escaping the engine. I think 🤔 or cause a engine fire. P.s amazing sound
Be very careful running those spectre air filters. They have a chrome center guard or beauty ring that is glued on essentially and can get sucked into your blower. Save yourself the headache and get a closed off k and n or a turbo gaurd.
Yea spectre Is like eBay cheap crap
Thank you for that! Notes taken!
Same thing I was going to post, change filter just to be safe
Use a turbo guard or something like that other than a small filter on the charger. Most likely will restrict how much airflow and will limit you.
Perfect! Thanks for the info!
Can't wait to see Blue 2V back on the road
Same man same!!!
My god that BOV sounds insane 🔥
Doesn’t it!?
i love how the ad came up at the same time and the countdown was syncd with you
I saw the thumbnail and I’m like wtf happened to his hair 😂 lovin Blue 2V!
Hahahahahahaha
Derek our here flexing working on blue with his gold Rolly on his wrist 😂😂😂
Rolly one day!
Blue2Valve is really coming together, good job man
Thank you bro!!!
I'm so happy for you bro, blue is sounding great! Id love to see her on the dyno!
Highly recommend on3 performance stainless mesh air filter I have it on my on3 turbo really awesome quality. I’ve seen those specter ones get sucked in and mess up a turbo before
Think ima go Anderson powerpipe!
@@DerekBaranProductions oh yeah forgot about those ! You should look into an N2MB Wot box too!
The red vaccum lines are for the ac vents i believe. My ac wouldnt switch to defrost and it was a red vaccum line in that area.
Hmmm okay
For the IAT sensor if your charge piping is thick enough you can drill and tap it, i believe you need a 3/8" NPT tap for it.
Also do your self a favor and delete the EGR and DPFE sensor, you don't need that stuff to make power and it will help clean up the engine bay by removing some vacuum lines and also the sensors themselves.
And like others have said, get rid of that cheap air filter and get a turbo guard.
Oh and it also needs to be after the mass air flow sensor cuz the mass air flow sensor is what heats the air that little sensor you have just monitors the air and tells the computer whether or not if it needs to cool the temp down or heat it up
Awesome thank you!
Love seeing you grow every day bro
Thank you for that man
That vacuum line looks like the one that used to connect from the egr, to the throttle body.
Oh thanks!
Music to my ears sounds awesome 😎👍👊
I live in Richmond Va too. I have to see this masterpiece in person
The car sounds way better then before! Good looking out VMP
That sensor needs to be next to the map sensor somewhere and possibly since the charge pipe is aluminum you would use like a self tap thread kite
Okay cool man thanks!
Thinking about getting a new edge project car. Should I???
Naw get 15+ coyote
Id say yes. Easy to work on, parts are cheap, lots of room for error, and lots of people have worked on them. So lots of info, tips, custom parts etc. Its a great first project car
@@KanenCarlson thank you very much
@@AC-kp8sp Haha one day
Definitely!
For your iat i run the same thing on my 2.3t in my fox and as long as you have it mounted at the front of the car where fresh air comes in it will work the same doesnt always mean you need to have it mounted on your piping
Hmmm gonna look into it!
my r33 has been big turboed and has a brand new clutch/flywheel setup. im soo impatient to get it broken in and tuned 🚀 so watching your car get tuned makes me so excited for what is to come with my project 🤘
Ayeee hell yeah man that’s really exciting!
That air temperature sensor was supposed to come with a rubber grommet and you would simply drill a hole on your intake between the filter and throttle body and the grommet will hold it in the hole
Looks like it has threads on it
What’s the point on disconnecting the hose from the valve cover and replacing it with a mini filter?
Flip the filter to where the silver is facing down so you just get the clean filter look 🤙🏼
Think I’m going to run a powerpipe on it!
Nice Derek blue sounds great! I know it’s a long time but can’t wait for the dragstrip!
Thanks man! and I can’t wait!
Loving seeing the new edge again 🔥
Same man so hap put I got it back!
Sounds good bro keep up the great work brother
Thanks bro!
Wow Derek blue 2 valve’s new tune sounds badass man
It sounds pretty healthy!!
I used a 05+ maf conversion and the iat is built in to the maf
Oh really?
Sct ba5000 is what I'm running for a 05 up car. Vmp makes one..... almost went vmp but, anyhow yea. And a pig tail conversion made by jms I think. I'm sure vmp will know
Great vid also always look forward to these!
Thank you man!
Can't wait to see blue dones, keeps up the work brotato chip!!
Done? What that mean?
Thank you dawg! 😂
@@richarcm done as in finished the build theodor brozavelt
I said it on Facebook but will say it again here. Javi from Droppin Gearz seen almost 40hp on his paxton s550 going from a cone filter to the filter guard.
Yeah I’m going to take it off forsure
Awesome video Derek! my favorite youtuber!! Have a great night God bless 🙏🏻
Thank you bro! Appreciate that!
Yes, you my boy blue. Looking good.
Thank you Neil!!!
Those red vacuum lines are for the egr
Awesome man thank you!
The car is coming along great!
Thank you man!
Derek quick question do you ever run your stangs? Like dude it would be sick to see you on some 1320 vids or some tx2k vids running them dudes down your cars have the potential.
They aren’t quite ready for that yet. (Part wise)
What is the part number for the blow-off valve that you have. it sounds sick!
Sounds dope bro!
Thanks Derek!
Have fun in Cali!
We are! Beautiful here!
Yo Derek. Not gonna be the one to tell you how to do up your car, but what happened to the blue shift knob that you used to have.
It’s coming back! One section at a time!
Sounds way better.👍
I agree! I love it!
Do you need valve seals? Or is it because it’s cold and rainy?
Who knows 😂😂😂
Instead of the little filter you put on the s/c get a Anderson performance pipe for them gains boi 💪🏽
That’s the plan!
Derek I have a 2 step kit I'm letting go for 180. It's for Blue 2V
Hmmm might have to get one soon!
I had to take mine out it’s easy to take the iat sensor easy just use a wrench and loosen and tighten them
What about putting them in though 🤘🏼
@@DerekBaranProductions that’s what I’m saying just use a wrench to tighten them it’s rlly easy
@@DerekBaranProductions same thing just gotta find a wrench that fits that plastic bolt type of thing
One of my dream builds amazing car bro🔥
Thank you bro!
The red ones run your ac control
EGR?
@@DerekBaranProductions yeah theres 2 one powers the vents and one goes to egr i had a leak in one of them on my 04 the ac was stuck on defrost til i got it fixed
Drill hole put rubber grommet and push it in to hole good to go just needs to see air in pipe I have one on my Jeep moved from intake manifold to intake tube
Hmmmmm I might try it
@@DerekBaranProductions give it a shot if u need pic or anything of mine let me know
Can’t wait till blue is complete
Same here man!
So did that change the tune that flim flan up on blue?
What’s that now?
Those red vacuum lines will be for your EGR
Thank you!
What type of gaming pc do you have?
That blow off valve is low why ???
Blow through setup
Should of got the SCT BDX Performance Programmer! Would of matched the car!
VMP sent this one out for free so I can’t complain!
@@DerekBaranProductions Nice
Man sounds Badass big dawg
Don’t use Spectre air filters on the supercharger...They’re made terribly and have a very possible chance of getting sucked into the compressor wheel and possibly further. Wouldn’t wanna see the 2V inhale scrap lol
Those red lines look like part of the egr
thank you!
hey guys, i been having this stalling issue with my 2000 mustang gt, i've tried a couple things but cant figure it out. anyone got a good forum or site for issues like this?
What’s going on with it?
My 04 screaming yellow Mach1 did the same a few years back. The sad part is it had been sitting all winter and I had just pulled it out for the spring service so that it was ready to go for warmer weather. It ended up being a bad fuel pump. It had no codes to check and no cel when it happened so diagnosing took a bit longer then just scanning for codes. When I first started it, it started right up then died. It never really ran for more than 30 seconds at a time and struggled to do that.
@@DerekBaranProductions the car starts fine and sounds healthy and will run for about 20 minutes the first start of the day but will stall. It seems to be stalling when the radiator fan kicks on. There isnt an engine code, there was one for a bad iac which I replaced and now the check engine light is gone, but the car still stalls.
You need to make the 2v loud again!!!
It’s the same exhaust as before!
🔥🔥🔥🍻let's go 🐎🐎🐎🚀
Getting there!
You Bought Blue Back?
Yesirr
Quite sometime ago
Man oh man where have you been!?
Nice man can't wait to get my 01 cobra boosted unless u just want to trade blue 2v 🙂
That’s a loss for him. Good luck with getting it boosted though
@@JoseDiaz-bk9mh yeah unless it was a termi
@@josesarabia1549 yessir. Cause he’s always wanted a termi and plans on gettin one in the future. But even then, that’ll mean that he’ll lose his iconic car once again. It would be a tricky situation for him.
@@JoseDiaz-bk9mhnobody in their right mind would trade a termi for blue when mine gets boosted it will smoke blue2v them high rpms I can do 80 in second now
@@therealjoker4207 I know. I’m sayin that even at that, he probably still wouldn’t trade. Either way no one else would give him that offer cause it’s a loss on their end. But for yours, he wouldn’t trade cause it’s a loss on his end. He would smoke you rn. But not if yours is boosted, which it isn’t. And you can’t boost yours if you trade it. So boosting yours is irrelevant and idk why you even brought it up again. Don’t reply to me if you’re not gonna make sense.
YURRRRRRRRR!!!!!!
💪🏼💪🏼💪🏼
This sounds like if a jet engine had a baby with a tiger, holy crap dude, this is sick!
Dude I love it!
Yo guys I’m 19 I’m looking for a job and probably going to buy a 2014 mustang gt automatic what do y’all think
Manual ftw
@@DerekBaranProductions do you recommend that I learn how to drive a manual like what are the benefits if I’ve only ever driven automatic cars
@@DerekBaranProductions like arent autos faster I know car guys love the manual but since I’m just getting into cars I was thinking automatic but lmk
I need a project new edge sooon
Same here, actually, I need a car soon lmao
Do it!!!
I love you Derek I always talk to jul and Brandon at C&C btw are you going sat
Ayeeeee 💪🏾
Welcome!!!
Find another filter, they are not rated for boost and the center metal piece on the end of the filter will suck through and destroy anything. Just a heads up please find another one...
Thank you!
Yeah man no problem I would prefer you not running to an issue and destroy I mean we do a lot of more high boost stuff likeI mean we do a lot of more high boost stuff like diesel wise but they're just not meant for boost because it sucks that centerpiece out and it'll go through the propeller and you don't want no foreign objects in there.
But keep up the good work I was down your way 2 days ago down in Richmond looking at a Terminator but it wasn't quite what I thought it was going to be.
@@DerekBaranProductions
Keep up the good work.
Your blower looks like turbo
Remove the cold side charge pipe and take that and the IAT to a trusted exhaust shop. They can weld a bung into charge pipe so that you can install your sensor.
Perfect, that’s what I’ll do!
Foxbody???
Please get rid of that socket shifter soon lol. That thing is horrible, put a stock back on if you have too!
Once we dial in the engine Bay Area, DONT worry I got this 😌
Damn making me miss my new edge
Your car looks amazing tho
@@VentiTimes appreciate it man🤟
Get another man!
@@DerekBaranProductions I plan on it, aiming for a Mach 1🤟
Get a Anderson Power Pipe.
I am!!!
the second i seen the notification i clicked so fast
I don’t think anybody cares 😝
Lol
Swear😂
Saw not seen🙄
Lmao 😂
i see that fortnite and among us icon the desktop lol!
What’s up Derek
Nothing much man! Whu?
Nothing man just excited to see more 2 valve videos
Bruhh whistlindiesel hella throwing salt on your intros man 🤣
Huh?
@@DerekBaranProductions made fun of you and other car guys cringe
@@zerSxx Na man mine isn’t that excessive. I watched it 😂😂😂 I think he’s throwing shade at stradman tbh lol
@@DerekBaranProductions i forgot about stradman good lord
🏎
Wadup vroom
Nice
Hearing Blue 2v makes me want to supercharge my V6 stang.
I love it!?
Sounds awesome
we miss the enegetic intro
YESSIR
😈🤘🏼
Has a built up procharged mustang and still rocking them garage door sealer side skirts😂
That’s right. Tell me they look bad though... 😤
DerekBaranProductions nah man they look perfect. I got them on mine too😂
3 2 1 *AD*
Thanks 🙏🏼
bruh why you moving to Cali bro?? everyone and there mother is leaving there for a reason
That tube from the rocket cover should probably go to a oil filter. Since the small filter will become oily and will prevent the air eventually escaping the engine. I think 🤔 or cause a engine fire. P.s amazing sound
Hmm gonna look into it! Thanks!
Just to correct myself I was meant to say oil catch can from the rocket cover 😁
Nice im carlocars but on a new acc
how was this 3 hours ago?
How the heck did u comment so long ago?
🧐
Nice!!
@@DerekBaranProductions i’m your 1st subscriber btw!!!
OMG DUDE NO MORE
I don't know why is bothers me so much to see you go animal on a box while you're opening it.
Can u reply to me on Instagram
I can on here!
@@DerekBaranProductions man I need that sponsorship
We was talking about
Hi
Hello!
First? Lol
Last...
Someone commented 3 hours ago, don’t know how
Not first. Some other guy was here 6 hours ago lol.
Almost!
Idk how dude jumped in here so fast before the video dropped...oh well I was close!