The part pressed wasn’t filled evenly, only a few strips of foam inside, with vacuum it would have collapsed or the glue would burst out due to the pressure
I have never been more inspired to give a try at making a carbon fiber anything. This was a great video my friend. I'm to look into a few parts to make on my car now. Definitely need a standout design like this to make my car one of a kind.
Gorgeous as always! Sorry for your car though, I hope you guys settled it. Anyway, have you done a carbon fiber phone case before? That'd be dope! Since it's smaller, simpler, and also cheaper on the material too, maybe more people will be able to actually start learning how to create carbon fiber stuff
I have seen that some runners who make their parts from carbon fiber, they put vinyl in the molds they make for even easier peeling and the surface is even smoother.
Good question. Normally contact areas have a layer of fiberglass in between to act as a barrier to prevent conductivity. Didn't see it here as part of the build.
@@nottherealjk Yeah I'm using aluminum to mount some items on a monocoque I am making. I have read the info and plan on using a thin sheet of fiberglass over the aluminum plates. But IDK.. I heard that GALV corrosion will weaken the carbon (like rust or something?).. If you learn anything about it on your project write me back.. Thanks DMAX motion sim
Yeah same question here .. I'm using aluminum to mount some items on a monocoque I am making. I have read the info and plan on using a thin sheet of fiberglass over the aluminum plates. But IDK.. I heard that GALV corrosion will weaken the carbon (like rust or something?).. If you learn anything about it on your project write me back.. Thanks DMAX motion sim
I died a little inside when you went straight to UV instead of a fast cut then polish on a pad. Great results still but all that hard work you deserved popping a little Meguiars on there haha
Hello friend. I fixed the insert mounts that connect the wing and the upright, and those mounts were bonded in place on the 3D printed mold. We bonded other insert mounts based on those mounts. I didn't think an indexing pins were needed.
very interesting idea as a maker, but couldn't you make this design into an active aero system? it seems you have the adjustment design well, but if you could add some strong motors to the rear wing, it could have the wing angle under braking, for example
Great video but, how did you do the spoiler stalks? Your video focus' not he wing more and they sort of just happen. How many layers of carbon did you use to make them strong enough? Are they hollow, made of 2 parts glued together like the wing?
So I have a project idea for you ..... it involves LumiLor electro luminescent paint and color carbon fiber fabric... I'm wondering if you can lay colored carbon fiber over it and add have the color show through?? Maybe you can give it a shot
Getting hit from behind absolutely sucks!! I’ve hd it happen twice on the motorway here in Australia, one not dissimilar to this. I’m still super anxious in traffic!! Nice work mate, all your stuff is great, including the video production!!!
Was the foam strips to help build up a lip when glueing the two sides together? Your technique for creating a solid edge/lip is much better and simpler in this video compared to your previous wing.
I have no where near the kit for this but it does give me so insight into how to make one of of metal (Swan neck) at least, also just very much enjoyed the process
Hello friend. I ordered CNC machining from my friend's factory in South Korea. I'm sharing the model files for CNC machining (step files). You can be able to do CNC machining with the files in your country.
Any chance you have a DIY for making your hand vacuum pump setup? I've got a rotary pump but its quite difficult to get an even pressure pull before it just sucks up the vacuum bag and stops working.
Hello, friend. Making a swanneck upright is no different than making a wing. I just laminated 14 layers of carbon fiber and 1 core mat. Same goes for bonding the metal inlet mount to the upright.
![DO NOT MAKE CARBON FIBER PARTS AT HOME (Making Charge Pipes) [DIY] with CR-Scan Lizard](http://i.ytimg.com/vi/YNWu1-r5HGo/mqdefault.jpg)
![DO NOT MAKE CARBON FIBER PARTS AT HOME (Making Charge Pipes) [DIY] with CR-Scan Lizard](/img/tr.png)
![How to Make a Carbon Fiber Wing [DIY] (with 3D Printed Molds)](/img/n.gif)
ECO-LAP Studio Instagram : instagram.com/ecolap_studio/
Wing Model File : drive.google.com/drive/folders/1f-slPY0C0sR2p-qqYSm7kEEfD0eCoO-y?usp=sharing
What's your g-code that you used for the
This wing looks amazing, I want to build on for my race car, where can we find the billet inserts you used to mount it?
Thanks for uploading files ! Tryin to do some to my project
Is this a Creality CR-10S Pro printer? Can I do the same thing on a Creality 3D Ender 3 V2 printer?
고급기술…그저 감탄 하다가 갑니다❤
absolutely brilliant !! i'm working on a single seater race car project and i gotta say your videos are really useful, keep it up man !!
Nice 😍 are you recording your build?
I am building my dream V12 supercar 😎
For clamping during glue-up, why not use a vacuum bag as well? It applies very even pressure, and is used a lot in guitar building, for example.
The part pressed wasn’t filled evenly, only a few strips of foam inside, with vacuum it would have collapsed or the glue would burst out due to the pressure
와.... 이번건 진짜 처음부터 끝까지 넉놓고 쭉 봤어요
You got that $400 ultrasonic cutter but you're still using the DIY pump lol. Bruh
Ultrasonic avoid dust (is a health precaution) and the hand pump makes him work out (help benefit).
Petty 😂😂😂
He also has a BMW M4 and still uses a non-electric pump hahaha
And baby wipes 😂
@@rarih100
Well baby wipes are very useful in cleaning works. We don't have any baby but still we always keep these in the house.
Glad to see massive improvement vs previous wing 😁. Good job !
I woul put positioning pins on the 3d printed molds. Makes it easier to assemble and align them correctly.
I have never been more inspired to give a try at making a carbon fiber anything. This was a great video my friend. I'm to look into a few parts to make on my car now. Definitely need a standout design like this to make my car one of a kind.
Gorgeous as always! Sorry for your car though, I hope you guys settled it.
Anyway, have you done a carbon fiber phone case before? That'd be dope! Since it's smaller, simpler, and also cheaper on the material too, maybe more people will be able to actually start learning how to create carbon fiber stuff
Ah you already made that one, I don't even remember watching it😅
Nice work. I want to scan in my current wing so i can make a swan neck version (discontinued 8 years ago).
You vids really make it possible!!
Why don't you make all the body parts with carbon?
The fact that you made it seem like you did this to be petty to the other driver makes this so much better.
어쩌다 발견한영상이지만 엄청난 실력자이시다... 능력이 부럽네요 바로 구독박고 갑니다
많이 안다치신거 같아서 다행입니다. 궁금한게 있는데 저렇게 diy하신 파트의 보상은 어떻게 되나요?? 저걸 어떻게 비용으로 책정해요... 아까워요
안녕하세요.
기본적으로 재료비를 기준으로 보상이되며, 일반적으로 시중에 판매되는 제품의 가격을 참고해서 보상금이 책정되더군요.
Glad you're back! Hope you're feeling better
It seems that you have not done any measure to prevent galvanic corrosion between CFRP and metal parts.
Anodising creates a thick enough barrier between the carbon and the aluminium, and the bonding adhesive gives enough space between the pieces too
What kind of a parking garage is that? It looks more like a Luxury Auto gallery :D Great craftsmanship by the way.
I have seen that some runners who make their parts from carbon fiber, they put vinyl in the molds they make for even easier peeling and the surface is even smoother.
Your work is amazing! Keep up the fantastic pieces you make! Absolutely love them!
Very nice work mate. Use PPE when you are working with carbon fibre. The dust is more dangerous than asbestos
the furious typing sold me, I'm subscribed
Hey please can you explain how you created the mold for wing on fusion 360?
Great job. 👍🏼 where did you get that adjustable sanding block???
Hello friend.
The sanding block is from Sia.
안녕하세요 혹시 이 쓰고남은 몰드 살수 있을까요 ㅠㅠ
Awesome! What kind of filament and how much infill did you use for the 3d printed mold parts? 😊
Hello, friend
I used PLA filament. And the molds are infilled 20%.
I hope you helpful.
블랙박스 보기전까지 한국인인가 긴가민가했는데 카본을 이렇게 잘다루는 분이 있을줄은 몰랐네요 진짜 외국분인줄
This is dope af. Really wanna try this out during my break from school. And give a friend of mine his wing that he’s been asking for. Thank you.
Hello, amazing work!
Can you please explain why you used pva and ethanol in the process?
Where to buy the other materials……
Carbon, bags, epoxy…????
Thanks….
Awesome video
Is there a way to reinforce it structurally? Would this withstand highspeeds with a lot of downforce?
I thought the sam would like to see video capturing 250 km/h
may i ask you how do you calculated the lift of the wing?
Работа шикарная как и всегда)🖐️👍
How do you know where to cut exactly once it's out of the mold so the two halves align perfectly?
Which filament do you use: PLA, ABS, PETG?
0:44 is beauty, and so is the whole video.
Have you done any FEA on the wing uprights to see what force they fail at? Working on a carbon fiber wing project myself right now.
Hey mate! Beautiful work, and also very complex. The small trunk lip, how are they made? Also empty inside? Thank you!
Great video! One curiosity, how do to ensure you do not get galvanic corrosion with carbon and metal bolts?
Good question. Normally contact areas have a layer of fiberglass in between to act as a barrier to prevent conductivity. Didn't see it here as part of the build.
@@nottherealjk Yeah I'm using aluminum to mount some items on a monocoque I am making. I have read the info and plan on using a thin sheet of fiberglass over the aluminum plates. But IDK.. I heard that GALV corrosion will weaken the carbon (like rust or something?).. If you learn anything about it on your project write me back.. Thanks DMAX motion sim
Yeah same question here ..
I'm using aluminum to mount some items on a monocoque I am making. I have read the info and plan on using a thin sheet of fiberglass over the aluminum plates. But IDK.. I heard that GALV corrosion will weaken the carbon (like rust or something?).. If you learn anything about it on your project write me back.. Thanks DMAX motion sim
Where did you get that aluminium extrusion for mountings? Great video!
Nice work! Did you understanf how much sandpaper will you use making carbon parts before you started? Because I did not :))
많이 안 다치셨나요? 후유증 조심하세요ㅠ 괜찮은 것 같아도 매일 한의원 가시는 걸 추천합니다ㅠ
So sad to see the accident, glad youre ok though!!
Great work! My only concern i, that Water could get in from the swan neck holders, inbetween the two spoiler halfs
pretty cool! idk why but it bothers me that the molds don't have index keying to mate together with lol
I died a little inside when you went straight to UV instead of a fast cut then polish on a pad. Great results still but all that hard work you deserved popping a little Meguiars on there haha
Hello I wonder why you don’t use indexing pins or other shapes to align parts?
Hello friend.
I fixed the insert mounts that connect the wing and the upright, and those mounts were bonded in place on the 3D printed mold.
We bonded other insert mounts based on those mounts.
I didn't think an indexing pins were needed.
very interesting idea as a maker, but couldn't you make this design into an active aero system? it seems you have the adjustment design well, but if you could add some strong motors to the rear wing, it could have the wing angle under braking, for example
How did you machine the metal parts for the mount? Is there a video on that?
Great video but, how did you do the spoiler stalks? Your video focus' not he wing more and they sort of just happen. How many layers of carbon did you use to make them strong enough? Are they hollow, made of 2 parts glued together like the wing?
대건에서 서브프레임 내린거 봤습니다 잘 수리하신것 같네요~ 차 여기저기 손수 꾸미신거보고 차에대한 애정과 손재주가 대단한분이구나 했습니다~ 재밌는 영상 잘봤습니다~
So I have a project idea for you ..... it involves LumiLor electro luminescent paint and color carbon fiber fabric... I'm wondering if you can lay colored carbon fiber over it and add have the color show through?? Maybe you can give it a shot
Is this a Creality CR-10S Pro printer? Can I do the same thing on a Creality 3D Ender 3 V2 printer?
what is the softwera use for make 3d molds?
Is it cheaper to make your own because you have to buy all the supplies yourself
Are BMWs made of paper? I totaled mine last year lol
Can you make a swan neck Ford GTD wing? And how much?
Getting hit from behind absolutely sucks!! I’ve hd it happen twice on the motorway here in Australia, one not dissimilar to this. I’m still super anxious in traffic!! Nice work mate, all your stuff is great, including the video production!!!
Was the foam strips to help build up a lip when glueing the two sides together? Your technique for creating a solid edge/lip is much better and simpler in this video compared to your previous wing.
will this work even if i dont have a car?
You can make mold seat 911 gt3 2022 Right?
Amazing man, wish I had these skills to create my own blue cf wing. I have some skills but this is beyond me.
윙을 잡아주는 스완넥 브라켓 소재는 무엇으로 하셧나요??
I have no where near the kit for this but it does give me so insight into how to make one of of metal (Swan neck) at least, also just very much enjoyed the process
Where did you get the bracket cnc from?
What shop or website.
Hello friend.
I ordered CNC machining from my friend's factory in South Korea.
I'm sharing the model files for CNC machining (step files).
You can be able to do CNC machining with the files in your country.
cool video, how did you choose your airfoil for the spoiler? also do you have any videos of the spoiler while driving the vehicle?
사고 난건 넘맘아픈데… 슈퍼맨이시네요…금손 !!! 대단하십니다
I can almost hear Paul guiding me through the process.
What about wetsanding?
Any chance you have a DIY for making your hand vacuum pump setup? I've got a rotary pump but its quite difficult to get an even pressure pull before it just sucks up the vacuum bag and stops working.
와아아 퀄리티 대박....금손이시군요....잘보고있습니다...굿좝....
Glad you're ok and great work as always :)
So you dnt use an autoclave?
ciao perchè non apri un tuo shop online sei bravo col carbonio e fai dei lavori "rari" quasi introvabili sul mercato
What material did you print with?
can you make carbon fiber motorcycle faring ?
Awesome looking craftsmanship! Not my preferred style of wing but stunning looking work!
How many meters of fiber did you use approximately ?
Great job !!
Stunning work. Excellent!
사고이후 처리는 어떻게되었나요? 예를들어 렌트카를 어떤걸로 받으셨는지
Beautiful Wing :) real good job ... but can we have more details about swaneck fixation :) you talk 12 layer of carbon, but we don t know more ... :(
Hello, friend.
Making a swanneck upright is no different than making a wing.
I just laminated 14 layers of carbon fiber and 1 core mat.
Same goes for bonding the metal inlet mount to the upright.
@@ECOLAPStudio thank for your answer :)
another question, the other wing you have put carbon fiber between top and bottom, now you use foam. Which is best ?
A fantastic job.Thanks for sharing
Have you tried making 3DP molds that interlock with a tab and slot design?
영상 시간가는줄모르고 잘 봤어요~ 혹시 기존 사고전 윙 구입처좀알수있ㄹ가요??
is it possible to list all used products?
You cut zero corners that’s for sure, wow! Where did you get the metal bits? And did you mount it to the previous mounting location?
Hello friend.
The internal mounts are CNC machined.
I previously designed the wing to fit its position.
아니... 사고낸 사람 욕을할라했더니... 3번 흐느끼다가 깊은 빡침을 스완넥으로 승화시키는 횽은... 그저...... 금손...ㅋㅋㅋ
헐.. 사고라니 ㅠㅠ 많이 안다치셔서 다행입니다
That keyboard, that was a drumbeat and I know it. I just can't name it!!!
Some serious skills!
Amazing! I think I will start small and make paddle shifts for my Stronic lol
What brand of epoxy do you use
Hi do you have a link to find your vaccum pump? Thanks 👍
Nice build, but I don't get why you didn't make registration points on your wing mold ! It takes a minute to draw...
Cutting carbon without a dust mask on?
Hello friend
I wore a mask when using the dremel.
But, when using the ultrasonic cutter, it was okay without mask.
주차장 차들이 ㅎㄷㄷ 보이는 페라리만 몇대인지 ㅎ
컷팅하는 기계가 어떤건가요?
hi,may i ask where to buy the 4:32 gripper?
크게 안다치셔서 다행입니다. 항상 안전운행 하세요.
請問一下 8:53放上去的那一片白布是什麼東西? 跟9:11放上去的那一片是甚麼 懇求解惑
3d 몰드하나 작업해주시는데 어느정도 가격이 들까요? 길이100cm에 폭이15cm 두께3cm인데요?