One thing I learned with casting metal, try to not make 90° angles in castings. Add a few degrees to the walls and the mold will pop the part right out.
Hard work but in the end the result has been incredible and it is clear that you have very good knowledge of how to treat carbon fiber and the material you have needed has been 10. Hopefully one day I will know how to do what you have done. great job man!
Oh boy, i've been there as well! Kudos to your persistence. Its hard. I know it is. But you did it - exceptionally well! Its done now, but my two cents for your project would have been: start with a positive mold. Less tricky with complex corners such as yours. Draft angles! Can't say for sure, but it looks like you held back on those a bit? Use a specialized filler or prime coat to get rid of layer lines and make sanding MUCH easier + you can achieve a perfect finish straight from the mold. Get (make) a vacuum pump. You can easily build one from a compressor off an old refrigerator or AC unit in a day or two - and comes in very cheap (80-100 bucks max.)
Great project! My humble experience shows that any project can have some flaws. And it's great if you can still make great detail even it has some problems first. And your work with 3d model and electrics is impressive as always!)
Hi, Bro! Thank you for the comment. Actually, I've made 4-5 molds. so, I had failed a lot. That was so hard works. Recently, I am loving 3D design, and electronic works. My major was computer programming in University. I hope to develop electronic modules and carbon fiber parts for car. Thanks for the good comment always. Thank you bro.
This is an epic steering wheel i would love to see it in my car (I don't think i could afford it) you should definitely sold this customized steering wheels for cars this is E P I C
Hey Bro do you know what OHMS to use to delete the Steering SRS? im having hardtime getting the correct ohms. Also do you know which wire to plug it on? there are 6 wires on the airbag and not sure which one. thanks in advance.
Not really a "how too" but watched it all nevertheless. By the when fanatec make a wheel that works on both sim and irl they charge a limb per wheel 😅 Do you make these for us to buy?
Hello friend In positive molds, carbon fiber is laminated on top of the mold, so carbon fiber parts larger than the size of the molds are completed. The negative mold will have the same shape as the designed model.
![How to Upgrade your Steering Wheel like a GT Race Car with Carbon Fiber Magnetic Paddle Shifter[DIY]](http://i.ytimg.com/vi/ckuZ8O7tve0/mqdefault.jpg)
![How to Upgrade your Steering Wheel like a GT Race Car with Carbon Fiber Magnetic Paddle Shifter[DIY]](/img/tr.png)
This man will one day build a complete M4 shell in his office and I'm here for it. Craftsmanship 101%🔥
Na, it would never fit in his oven.
I freaking love this channel, no stupid intro, no story of your life about this and that, just get to work and get it done!
와~~~~ 인간승리네요ㅋㅋㅋㅋㅋㅋ 대단합니다!! 엄지척!!!
Geeeez, your patience knows no limits
Men on a mission...
Expected him to start throwing eggs on it for some reason...
One thing I learned with casting metal, try to not make 90° angles in castings. Add a few degrees to the walls and the mold will pop the part right out.
Schematics & PCB Gerber Files : drive.google.com/drive/folders/1OF0iEHbfCqxwMFwK8TWUg17m7dQTzyxD
YASSSSSSSS THIS IS THE VIDEO I'VE BEEN WANTING FOR SO LONG! Good stuff, my dude!
Absolutely insane! Hands from right place!
거푸집도 3D프린팅으로 만들고 오븐으로 굽는거 실화냐...
빨리 떡상하셔서 장비 좋은걸로 사십쇼!
I've been a big fan of your videos for a while now and I spent the whole night catching up on everything you've posted. 😍
had to hit that bell i missed this one one the 2nd, the ASMR is the best part by the way. Videos are getting way better too. i love it
Some people are just so talented! WOW!
That is some next level artistry stuff. You can't but admire your skill and determination. The finished product is amazing. Bravo sir, bravo 👏
Hard work but in the end the result has been incredible and it is clear that you have very good knowledge of how to treat carbon fiber and the material you have needed has been 10. Hopefully one day I will know how to do what you have done. great job man!
I have literally been looking for a video on this for years, last time was right now!!! Thank you!!!!! amazing work!!!
BEST TH-camR!!!
Oh boy, i've been there as well! Kudos to your persistence. Its hard. I know it is. But you did it - exceptionally well! Its done now, but my two cents for your project would have been: start with a positive mold. Less tricky with complex corners such as yours. Draft angles! Can't say for sure, but it looks like you held back on those a bit? Use a specialized filler or prime coat to get rid of layer lines and make sanding MUCH easier + you can achieve a perfect finish straight from the mold. Get (make) a vacuum pump. You can easily build one from a compressor off an old refrigerator or AC unit in a day or two - and comes in very cheap (80-100 bucks max.)
Best diy wheel ever
광고 축하드립니다 형님 항상 질 좋은 컨텐츠 제공 감사합니다
영상 기다렷는데 오랜만에올리셧네요~!ㅎㅎ 항상잘보고잇습니다
awesome work, hope you're wearing a proper filteration mask, CF is dangerous when in dust form from sanding
Great project! My humble experience shows that any project can have some flaws. And it's great if you can still make great detail even it has some problems first. And your work with 3d model and electrics is impressive as always!)
Hi, Bro!
Thank you for the comment.
Actually, I've made 4-5 molds.
so, I had failed a lot. That was so hard works.
Recently, I am loving 3D design, and electronic works.
My major was computer programming in University.
I hope to develop electronic modules and carbon fiber parts for car.
Thanks for the good comment always.
Thank you bro.
Bravo !!! From France
This is just INSANE !!
Cool video bro. I like your style man 😁
Very nice work! Maybe I'll try prepreg one day.
Amazing work as always!
Great video! Can’t wait for the next one! Keep it up!
Ohhh no way I’ve been waiting for this one!!!
2000 years later That was classic!!.. Epic efforts on all this my friend! Going to attempting CF on my motion rig.. Cant wait!! DMAX motion sim
Salut ! Content de revoir une vidéo !!
C'est quali de ouff
I have been waiting to do this to my car for months and could not figure out how you get quick release paddle shifters… this is amazing. Thank you.
Wow!!!! Absolutely awesome. Thank you 🙏
yes sir 🙌🏻
Amazing as usual! Came out perfect!
Loved watching this and amazing work, though seeing you cut it with the dremel indoors without sleeves on... I'm getting itchy already
Damn. Respect bro for your hardwork!!!
for anyone trying something like this, use a SEALING facemask when sanding carbon fiber, the dust it creates is extremely bad for your lungs.
Very impressive!
This is an epic steering wheel i would love to see it in my car (I don't think i could afford it) you should definitely sold this customized steering wheels for cars this is E P I C
진짜로 휠 깎아서 만드시는 장인..
Nice work!
Everything you did make me feel its so easily
Love your videos, inspiring :)
amazing work.
영상 기다렸고요~~!!!! 잘보겠습니당
아니 이런 환자분을 알고리즘이 왜 이제 알게한거지 ㅋㅋㅋ 바로 구독과 좋아요 누르고갑니다 ㅋㅋ
Love it definitely gonna be my guide for my first composites project
Отличная работа!
한국인이라 자랑스럽습니다ㅎㅎ
중독되는소리와 영상잘보고가요, 재미도있구!! 👏
10만 축하드립니다
amazingggggg all are made by ingenius incredible !!!!
Respect man!
I lmao at the beaver part 🤣 id be furious
Nice work
Вот почему так долго не было серии)) Супер, продолжай!
이 형 진짜 손재주가 와우
Superb Craftsmanship
Very nice work 🥶💧💧💧💧💧
this. was. amazing.
도데체 못하는게 뭔가요? 대단합니다. 정말 배우고싶습니다
Excellent
국뽕이 차오른다~ 대단하심다! 근데 버튼은 어디서 구하셨나요ㅋ
와... 대단하십니다 👍
Can I love your videos
That is a cool steering wheel indeed
It very vey very cool..
consider using ASA plastic, and then apply acetone vapor smoothing technique to make surfaces smooth.
you can try printing the mold verticaly so the carbon fiber comes get off more easily
Superbe réalisation !
게임용 레이싱 휠인줄 알았는데...
갑자기 차량용 멀티펑션 스위치가 보여서 헉~~~!!! 했습니다.
언제봐도 카본은 진리군요...
Love the video! Next time when finishing the 3D printed mold, use black epoxy spray paint. That’s what I did and it worked great!
Really amazing. You are awesome
bravo!
난 모해. 이 형님 짱인듯
Incredible work! Love the attention to detail with the stitching too! 😂
What is that QR you're using? It looks great!
Just like DTM steering wheel :) i like it so much
Genius
Do more: carbon TV, carbon chair, carbon sofa) Nice video)
I'm confused, how are you using the Krontec QR hub with the fanatec wheel? Is there an adaptor on the market or did you make it yourself?
Oppa is back 😳
Bro you are one fawking talented guy... and i want that wheel LOL
wow, amazing!
Hey Bro do you know what OHMS to use to delete the Steering SRS? im having hardtime getting the correct ohms. Also do you know which wire to plug it on? there are 6 wires on the airbag and not sure which one. thanks in advance.
Good evening! How long you bake prepreg and what temperature?
Sos un genio amigo...felicidades
진짜 존경스럽다.
시뮬주행 인제에 레카로 시트까지 ㅋㅋㅋㅋㅋ
혹시 공대 출신이신가요????
안녕하세요.
공대출신은 맞지만 기계관련 전공을 하지는 않았습니다. ^^
황금손!👍
드디어 성공작이~!!!!
ว้าวววว อยากได้แบบนี้
형 나중엔 M4한테 카본휀다도 만들어주세여..!! 형차는 흰색이라 잘어울릴거에여!!!
Bmw needs to hire you at this point
I love the fact he has what looks like a fanatec QR2 two years before release 😂
Not really a "how too" but watched it all nevertheless.
By the when fanatec make a wheel that works on both sim and irl they charge a limb per wheel 😅
Do you make these for us to buy?
Well...i mentioned it in the helmet video but here it is, you already did it
와 이건 진심미쳤다 인정
와 너무 잘 만드십니다!!
과정을 전부 독학하신거에요?
안녕하세요.
저는 카본섬유와 복합소재에 대해서 제대로 공부를 한 적은 없으며,
보통 유튜브와 인터넷을 통해서 자료를 찾고 있습니다.
유튜브와 인터넷에는 생각보다 많은 자료가 있습니다 ^^
This is great! but why not make a male profile mold and then layer the CF over it?
Hello friend
In positive molds, carbon fiber is laminated on top of the mold, so carbon fiber parts larger than the size of the molds are completed.
The negative mold will have the same shape as the designed model.
have you used petg to make the molds? works great, petg is non-stick