Joying did update the harness for the tacomas and now you can retain oem reverse camera and steering wheel controls . I just received my unit and installed it and can confirm it works . I have the 2014 tacoma non JBL and was told to order the JBl harness and it will still me compatible
@@wipachogie10 yes I have the oem camera in my rear view mirror but I also connected it the the head unit. They both work but the rear view mirror camera has a switch that I can turn it on without putting the vehicle in reverse.
Hey bro theres 4 wires from the toyota harness right. Black red white and black with tape. I tried playing it over and over but i only saw that you only connected 3 wires.
What year is your Tacoma? I've read that some have the rear camera display in the factory HU and other are in the rear view mirror. Mine is a 2013 and is in the rear view mirror. Just curious how this compares to your set up. Thanks
Hey thanks for the video! When you did this did you actually cut off wires from the actual toyota harness? Could you not get away with just splicing them as to leave things as factory as possible? Also when ordering this did you have to order the radio that comes with the back camera or did you get everything you needed without ordering that option? Thanks!
Hey bud.. I have the same set up as you .. I was told I needed a canbus adapter for the steering wheel controls... I have it, but joying said I don't need it .. can you detail what you did with that part since yours is working... Great video btw.. thumbs up
How is the radio working, Very skeptical about the brand, But looks very well-made, The only issue about backup camera on my end will be that my back up camera screen is in my rear review mirror I could maybe piggy tail splice together the cables and run them down to the actual radio
@@Christophergg279 The Air play works good You can use it wired through USB or through bluetooth. For the camera you should be able to splice the rear view camera into the headunit to get signal .
Just to be clear you cut off the plug and don’t do anything with the plug but with the wires you do? Have you experienced your unit getting super hott? I’ve had it just sitting in my dash without the mounting brackets for the past week so I’ve been able to pull it in and out easily. After a 30 min drive my Joying main box is almost untouchable it’s so hott. Kind of worries me it will burn up on a longer drive.
My radio doesn't get hot but my truck is tinted so that may help. yes the plug I cut is needed for the rear view camera, but it isn't necessary to cut the plug off you can just tap into the plug with T tap connectors or use the method I used. I haven't had many issues with my head unit. it will on rare occasions reset.
@@wipachogie10 it shows how to wire up in the video. black cable on toyota harness gets connected to the signal cable behind the glove box .those 2 cables get connected to the orange cable labeled on the joying head unit. in video i had it cut just to show what the cable locked like .orange cable is attached to the radio harness .
Did your harness say Toyota Tacoma? I got mine for 2013 Tacoma with jbl and only one of the connectors hook up and the harness says Toyota Prado, I just emailed them too.
if you watch starting at 5 minute mark. it explains what wires are connected to the orange . orange wire comes prewired to the joying harness. it was cut in the video for demonstration purposes. hope this helps
Thanks for making this video, just hooked mine up with this guide! Perfect and to the point!
Joying did update the harness for the tacomas and now you can retain oem reverse camera and steering wheel controls . I just received my unit and installed it and can confirm it works . I have the 2014 tacoma non JBL and was told to order the JBl harness and it will still me compatible
So if I bought it I wouldn’t have to splice wires to use my oem reverse camera? There would just be a connector?
Do you mean to say that when you ordered the HU you selected the option on their website that asks if you have a JBL amp which adds about $15?
Thank you for making this video! I've searched for hours attempting to find info on the camera hook up.
I also searched and couldn't find a tutorial on how to hook up the oem camera . Glad I could help
Great unit I’ve had mine for about 2 months have no regrets.
Plug and play?
@@cxle8904 yes
@@wsb2k1 so you didnt keep your oem camera hooked up?
@@wipachogie10 yes I have the oem camera in my rear view mirror but I also connected it the the head unit. They both work but the rear view mirror camera has a switch that I can turn it on without putting the vehicle in reverse.
@@wsb2k1 did you do what he did in this video?
Hey bro theres 4 wires from the toyota harness right. Black red white and black with tape. I tried playing it over and over but i only saw that you only connected 3 wires.
Thanks, used this to wire in my backup camera
NP Glad My video Helped
What year is your Tacoma? I've read that some have the rear camera display in the factory HU and other are in the rear view mirror. Mine is a 2013 and is in the rear view mirror. Just curious how this compares to your set up. Thanks
Hey thanks for the video! When you did this did you actually cut off wires from the actual toyota harness? Could you not get away with just splicing them as to leave things as factory as possible? Also when ordering this did you have to order the radio that comes with the back camera or did you get everything you needed without ordering that option? Thanks!
yeah you could just splice into them. I ran out of Ttaps so I just twisted and heat shrink them
@Dale did you figure it out?
Does this cancel out your reverse camera on the rear view camera?
Hey bud.. I have the same set up as you .. I was told I needed a canbus adapter for the steering wheel controls... I have it, but joying said I don't need it .. can you detail what you did with that part since yours is working... Great video btw.. thumbs up
Is this right? I have a Samsung so i would have to plug it in so the android play would work?
How is the radio working, Very skeptical about the brand, But looks very well-made, The only issue about backup camera on my end will be that my back up camera screen is in my rear review mirror I could maybe piggy tail splice together the cables and run them down to the actual radio
By the way how’s the AirPlay? Functionality
@@Christophergg279 The Air play works good You can use it wired through USB or through bluetooth. For the camera you should be able to splice the rear view camera into the headunit to get signal .
Heads up on my 2008 there were only 2 screws to remove the hazard module.
Just to be clear you cut off the plug and don’t do anything with the plug but with the wires you do?
Have you experienced your unit getting super hott? I’ve had it just sitting in my dash without the mounting brackets for the past week so I’ve been able to pull it in and out easily. After a 30 min drive my Joying main box is almost untouchable it’s so hott. Kind of worries me it will burn up on a longer drive.
My radio doesn't get hot but my truck is tinted so that may help. yes the plug I cut is needed for the rear view camera, but it isn't necessary to cut the plug off you can just tap into the plug with T tap connectors or use the method I used. I haven't had many issues with my head unit. it will on rare occasions reset.
@@projectb2429 where does the orange wire that says "back" go?
@@wipachogie10 it shows how to wire up in the video. black cable on toyota harness gets connected to the signal cable behind the glove box .those 2 cables get connected to the orange cable labeled on the joying head unit. in video i had it cut just to show what the cable locked like .orange cable is attached to the radio harness .
The videod oesnt show the "Orange - Back" wire connected to anything in the video. Did you wire it back into the joying harness?
Yeah why splice it in if it dont go any where?
@@wipachogie10 for demonstration purposes only. its connected to the back of the joying headunit
@@projectb2429 how does it connect back to the joying head unit?
@@wipachogie10 it comes attached to the headunit .
@@projectb2429 ohh ok. Thanks
did you need to use 12V to 6V converter? Stock camera is a 6V unit.
No I did not but its been a couple months since I've installed and I have had no issues
Did your harness say Toyota Tacoma? I got mine for 2013 Tacoma with jbl and only one of the connectors hook up and the harness says Toyota Prado, I just emailed them too.
I dont remember what the harness said sorry .I do recall jbl requires a different harness than non jbl
I have the jbl system and mine said toyota Prado as well. Use the 8 speaker harness
how long did it take to ship? and is the head unit still working good. skeptical about buying it
The head Unit took less than 17 days to arrive. Head unit still works fine.
What year is your Tacoma?
Do your steering controls work? Mines didn't.
yes mine worked except for 2 buttons .If you go settings you can program the buttons and the functions .
Did you have to buy any other connectors to keep the steering wheel functions ? Or just with the harness from the joying stereo ?
@@ivanrizo4688 no it worked just by going into the settings and configuring the buttons
For type of model of year can be install?
I brought the 10.5 joying unit. For some reason the joying harness doesn't connect with the oem unit.
Why do you say that? How you get it to work then?
Will this work on a 2011 Toyota Tacoma?
This will fit 05-15 so it fits your 2011 great unit .
The 24pin socket ur holding at 2:50 where does that come from?
it comes from original toyota harness . its the back up camera plug
Do you ever wish you had the model with the volume knob?
yes it would've definitely been a nice addition
What did you connect the orange wire too?
if you watch starting at 5 minute mark.
it explains what wires are connected to the orange .
orange wire comes prewired to the joying harness. it was cut in the video for demonstration purposes.
hope this helps
Where’d you get the plug that’s to retain the factory reverse camera?
I wired it in because joying doesn't offer one . the video shows how to wire it .
Good video
does the unit come with the RCA cables for the backup camera splicing?
no it doesn't
@@projectb2429 Where did you get them from? I'm talking about the yellow jack cable you cut. It seems thicker than a normal RCA video cable.
@@projectb2429 where from?
@@projectb2429 where does it come from then?
@@zZzL33TzZz you can use any video cable from an rca .the thickness doesn't matter
Where can I get this
so do you keep oem back up camera and usb port?
yes usb is adapted with harness camera has to be wired
Hello, does your steering wheel control work?
yes they work all but 2 buttons (left and right )
what size is that???
9 inch
what’s up guy, wondering how you made that Tacoma emblem where the clock is that’s fuckin sick
Will this work for a Tacoma 2013?
If its the non jbl yes it will.