Just saying for all you people out who are new to airsoft and wanna switch to deans, DON'T CUT THE WIRES AT THE SAME TIME IT WILL SHORT OUT AND ARC AND MORE THAN LIKELY RUIN YOUR BATTERY.
I don't mind certain speedsofters, but basically all the speedsofters I've run into just sit around at the back with a polarstar doing nothing but holding down the trigger and acting like that makes them the best player there. I feel that's why speedsoft catches so much flak.
William Gillespie I wouldn't call that a speed softer I would say that's some rich kid who thinks polarstars are the only 30+ rps gun who's too scared to get shot XD
Do you think in the future for this type of video, you could give timecodes in the description for each thing you talk about? I don't have a lot of free time and unfortunately can't really commit to a whole 11 minute video when frankly some of the things just don't interest me. Not trying to insult you at all! I promise. Very big fan of the channel, it's just a pain skipping through stuff that doesn't really pertain to me or interest me.
Just a thought here, For my RC gear i have upgraded my batteries and thing from the Deans connector to the XT60 connectors.. Since doing this i am now switching to the XT30 connector available from HobbyKing. These are small connectors, easy to put together and take apart, they have low resistance and are good for 30A constant current. I think if im going to upgrade connectors then these are what i will be switching to..
My God.. All I ever got to do at home in the Philippines was Speedsoft, speedsoft, speedsoft. I'm so happy to become an overall type of Airsofter/MiLsimmer here in the US. Not one single regret moving here. Lol. The Airsoft sites in the Philippines are nothing compared to the simplest US local fields.
JOOOOOOHN "Airsoftology Tuesdays"....I'm totally ok with it being on Tuesdays. Hopefully everyone else agrees since it's more efficient for you and we get the vids in a timely manner. We really do appreciate all the info and work you've put into making Airsoftology a staple in the Airsoft community. Mega uno wow is the name : )
My go to for all plugs dealing with LiPo = XT60 or Bullet style connectors. XT60 for anything normal, high draw (and I mean, super high, like 60c+ 6-8S [22.2v - 29.6v]) gets bullet connectors
Used EC3 connectors for years in RC and switched a few rifles over to them. They work fine and according to the chart you included in your description, are close to Deans in power comparison..
use a file to roughen up the tips on the deans connector. I have never had difficulty soldering things together until I bought some deans clips to put on batteries to fit my gun which came Deans clipped. The solder just wouldn't stick to the prongs until I roughed them up a bit.
TheNewBoldView bit late but Revision Fan goggles on sale and a 15 dollar mesh is superior to a mask, especially if you fit it right. So much cooler in summer, and the fan goggles barely ever fog!
hi there Jonathan, keep up the great videos, the one on the deans connectors was great, could you please mention that when changing the connector on the battery to cut each wire separately, if not they will short the battery out, it may sound stupid to say this but I have seen it done recently and ruined a brand new battery as most of the batteries we get here are still Tamiya connectors, I think moving the show to Tuesday would be great again many thanks and keep up the good work
It's not just the reduction in resistance, the dean plugs are so much smaller than tamiya plugs as well, which is a really great advantage for many aeg's where battery space tend to be quite limited. Deans are also better insulated against water and pose less of a risk to cause a short circuit. The pins in a tamiya tend to be quite brittle and might come loose from the plastic casing too, something that doesn't happen with deans since the cables are soldered onto them. There really is no reason whatsoever to run tamiya.
What are the benefits and downsides of getting a power up suppressor for any kwa gbb? I've heard the extra pressure created by the suppressor destroys the hop up and nozzle.
anther advance of deans is a geometry and standardization:small compact plugs who accept all batteries ( from large to small sizes ). No need to buy/ make a plug convertor anymore or buy a special battery :-)
Regarding the speedsoft part, its not stirring up for the sakr of stirring up. A huge part of airsoft is the realism and that immersive experience, if you have someone running around with a bright pink gun it takes away from the realistic experience and makes it seem like a typical everyday sport..
What is your opinion on shell ejecting guns, I think they are cool and just about as realistic as you can get but I think they are too over priced for added realism and no one wants to use them in skirmishes because no one want to pick up reusable shells.
At my main field in LA half the people are 12 year old kids with dye i4s and P*s they talk shit and shoot with their middle finger and hold the gun weird they think they are better than anyone else. People at the field play count the dye i4 as a joke what are your thoughts on this
i shoot with my middle finger but i put my pointer finger on the mag release so i dont have to take my finger of the trigger and reload faster but i have been playing for 5-6 years and use only mid-caps but i see what u are saying down here in florida it is allmost the same way
XT60's are great plugs too, I came from the freestyle drone world and we all used XT60's because of the low resistance, high current connections. Dean's are good but the xt60, imo are better
Tue is cool. I usually watch your vids on Tuesday mornings anyway. Technically Tactical Tool Tips Tuesdays has a nice tongue-twister thing going for it.
Witch first airsoft gun should I get for primary around 150 - 200 dollers and what vest and helmet should and do u live in canada cuz I saw u there u got me a 1911 tac
Deans are better in ANY electronic connection. And they perform better then the Xt60 connectors. For example I like to go professional R/C car racing (Hint my profile pic:D) and we need that fast discharge rate (120c-150c) batteries. And deans out class any connector because it has the most contact and it is made out of the best material.
Looking to turn my KWA SR-10 into a high FPS Semi-Auto only platform. I know the answer is debatable but which internal parts would be worth upgrading and which part manufacturers do you reccomend? I love your videos, keep up the good work.
You will be frustrated if you try using a 20 dollar iron. I tried and it didn’t produce enough heat. Bought a 200w soldering gun and I’ve had no problems
Hey Jonathan, what are some of the first internal/external upgrades that u would make to a more basic mid range airsoft gun? I'm thinking of upgrading my airsoft GI G4 which is a g&g combat machine base. Thank you, and love the show!
From my understanding you scramble on Mondays to get these videos up and we don't see them till likely the evening/late night depending on time needed. So in some cases we may not see the video till Tuesday anyways and if it will increase the quality of the video I would be all for it. As for a name Tac-Tip Tuesdays?
American Tactical Defense AIRSOFT because most people dont have deans batteries and believe it or not alot of the younger kids who play airsoft can solder, and honestly tamiyas work ok but deans are just a bit better
Can you use a Deans-Tamyia adapter? I know it doesn't solve the resistance, I'm asking about using a Deans battery with a Tamyia airsoft rifle. Would it be ok with using an adapter, if it's ok to change the connector from the rifle?
well green gas has a lot less power behind it and CO2 is very powerful although you can buy CQB CO2 pistols which have a lower fps. It also depends on where you live, if you live in a cold environment (like I live in Minnesota and its always cold here) Its probably best to get a CO2 pistol. Hope this helps Elves Airsoft
Hi Higgs, thanks for the video🤗 super interesting ! So the question is: if Deans connectors are so efficient and cool, why the hell the big airsoft AEG production companies still use Tamiya connectors ? It doesn’t make any sense to keep evolving the AEGs with new electronics and cool features and keep those less efficient tamiya connectors ! What do you think about that? Thank you 🙏
I think because it is cheaper and tamiya connectors are still very prevalent in the industry. I have noticed that the industry is slowly shifting towards deans connectors. A lot of the newer higher-end entry level AEGs come with deans connectors.
Hey airsoftology, love the show, and I've got a question; I'm running a mostly stock JG m4, only upgrade I've done is upgrading the stock 363mm inner barrel to a 469mm barrel, but my rof is extremely slow. I'm currently running it with a 8.4v nimh battery, and it even seems too slow with that. I've not chronoed it so i dont know the exact rof, also would that big of a barrel increase drop my fps? thanks again, love the show.
I've been playing airsoft since December, and have really gotten into it. It seems to me that I'm missing out on a lot by not knowing how to tech guns, so what is the best way to get into or start learning to work on guns?
what is a good way of getting in to disassemble and shimming and stuff in gear boxes??? (it's just if you screw up on a okay gun it's allot of money that is lost)
Hey John, it's Ben from the 4 year anniversary at ss. (I'm the kid with the gun you signed) I wanna do some upgrades anything you can recommend. No real budget.
Tuesday please hows "Early Morning Operator" or "Operator Tips" or just anything with Operator thanks a ton your one of my favorite channels and make the most hight quality informative stuff on the youtubes my only problems is theres not enough of you any way thanks for making my day every other day
+WhoWouldWantThisName Don't use them. They're used by ricers in the automotive world and can easily short out because they actually have exposed contacts plus they themselves have a large amount of resistance in them so it'd be counter productive to crimp on deans connectors. Soldering is very easy, it's very hard to screw anything up unless you put the iron on paper or cardboard or something and start a fire
I have full sized JG T3 K3 and want to convert it to a shorty G3, however I can't find the replacement parts (cocking tube, outer barrel, and hand guard). So I was wondering if MP5 parts would work instead?
very good video of describing diffrence between these 2 conectors. When I changed my gearbox and motor for one with stronger spring my tamya connector just burned out. I ran it with 9.6V battery. Do you think its because of that high resistance of tamya connector?
Tamiya connectors are garbage, that's why, they have a very small contact surface and are made of very thin metal, not sure if it's copper even. Deans or XT60 would be a significant upgrade.
Heres a question.... how do I tell if I can upgrade the externals of my gun? I want to put magpul MOE stock, handguards, and pistol grip on my JG m4 basic.
hey john, i own the KWA cqr mod 1. the range is crap (it can prob hit the same spot multiple times (accuracy wise) up to 100 feet then the bbs just fall out of the air). i want to upgrade the bucking and if i have to the barrel (i also sooner or later will switch out the air cylinder to the regular 2gx cylinder) what bucking/ bucking barrel combo would you suggest (ive heard that the G&G green bucking is good) also any other mods that might be useful to it (im running a 11.1 15c 1400mah lipo and a backup 11.1 20c 1600mah lipo)
![อยู่คนเดียวกับเขา - ส้ม มารี (Zom Marie) [Official MV]](http://i.ytimg.com/vi/gq1cWAIQDLg/mqdefault.jpg)
![[TH] 2024 PMSL SEA W1D5 | Fall | เก็บแต้มของจริง คือวันนี้](http://i.ytimg.com/vi/EciIAlCXg5k/mqdefault.jpg)
5:20 is where the Deans connectors actually get discussed. If you want to skip the bs.
Thx dude
Thanks
thank you 🙌🏻🙌🏻
This guy can stf up, he records himself to listen to himself.
And the answer is: Yes, for lower power usage, lower heat, and faster firerate. No negatives
Just saying for all you people out who are new to airsoft and wanna switch to deans, DON'T CUT THE WIRES AT THE SAME TIME IT WILL SHORT OUT AND ARC AND MORE THAN LIKELY RUIN YOUR BATTERY.
I don't mind certain speedsofters, but basically all the speedsofters I've run into just sit around at the back with a polarstar doing nothing but holding down the trigger and acting like that makes them the best player there. I feel that's why speedsoft catches so much flak.
William Gillespie I wouldn't call that a speed softer I would say that's some rich kid who thinks polarstars are the only 30+ rps gun who's too scared to get shot XD
Do you think in the future for this type of video, you could give timecodes in the description for each thing you talk about? I don't have a lot of free time and unfortunately can't really commit to a whole 11 minute video when frankly some of the things just don't interest me. Not trying to insult you at all! I promise. Very big fan of the channel, it's just a pain skipping through stuff that doesn't really pertain to me or interest me.
i was thinking the same,
Just a thought here, For my RC gear i have upgraded my batteries and thing from the Deans connector to the XT60 connectors.. Since doing this i am now switching to the XT30 connector available from HobbyKing. These are small connectors, easy to put together and take apart, they have low resistance and are good for 30A constant current.
I think if im going to upgrade connectors then these are what i will be switching to..
yeah the XT30s are more than capable of handling the current draw of high power AEGs.. and they're smaller than dean's.
Hey John, I would love to see a tech tip video about explaining flat hop units vs regular hop ups. Thanks!
Exactly right. Cecina on corn tortilla w/cilantro, onion, lime.
My God.. All I ever got to do at home in the Philippines was Speedsoft, speedsoft, speedsoft. I'm so happy to become an overall type of Airsofter/MiLsimmer here in the US. Not one single regret moving here. Lol. The Airsoft sites in the Philippines are nothing compared to the simplest US local fields.
This is the first video I've seen without a dislike.
JOOOOOOHN
"Airsoftology Tuesdays"....I'm totally ok with it being on Tuesdays.
Hopefully everyone else agrees since it's more efficient for you and we get the vids in a timely manner. We really do appreciate all the info and work you've put into making Airsoftology a staple in the Airsoft community.
Mega uno wow is the name : )
My go to for all plugs dealing with LiPo = XT60 or Bullet style connectors. XT60 for anything normal, high draw (and I mean, super high, like 60c+ 6-8S [22.2v - 29.6v]) gets bullet connectors
Used EC3 connectors for years in RC and switched a few rifles over to them. They work fine and according to the chart you included in your description, are close to Deans in power comparison..
use a file to roughen up the tips on the deans connector. I have never had difficulty soldering things together until I bought some deans clips to put on batteries to fit my gun which came Deans clipped. The solder just wouldn't stick to the prongs until I roughed them up a bit.
facemasks or goggle/mesh/helmet combo?
Id go for the combo but it depends on ur budjet
well i actually just ordered the dye invision mask for 150 because i pro is the #1 piece of gear you have :)
TheNewBoldView bit late but Revision Fan goggles on sale and a 15 dollar mesh is superior to a mask, especially if you fit it right. So much cooler in summer, and the fan goggles barely ever fog!
no they arent XD #dyemasterrace
+TheNewBoldView dye=bae
hi there Jonathan, keep up the great videos, the one on the deans connectors was great, could you please mention that when changing the connector on the battery to cut each wire separately, if not they will short the battery out, it may sound stupid to say this but I have seen it done recently and ruined a brand new battery as most of the batteries we get here are still Tamiya connectors, I think moving the show to Tuesday would be great again many thanks and keep up the good work
Oh yeah, that's a really good tip! Sometimes the simple things are the ones I forget. -J
What is your favorite gun in Insurgency. Security and Insurgents. Did u know there was an update?
BEST INFORMATIONAL VIDEO ON DEANS EVER MADE
It's not just the reduction in resistance, the dean plugs are so much smaller than tamiya plugs as well, which is a really great advantage for many aeg's where battery space tend to be quite limited. Deans are also better insulated against water and pose less of a risk to cause a short circuit. The pins in a tamiya tend to be quite brittle and might come loose from the plastic casing too, something that doesn't happen with deans since the cables are soldered onto them.
There really is no reason whatsoever to run tamiya.
What are the benefits and downsides of getting a power up suppressor for any kwa gbb? I've heard the extra pressure created by the suppressor destroys the hop up and nozzle.
anther advance of deans is a geometry and standardization:small compact plugs who accept all batteries ( from large to small sizes ). No need to buy/ make a plug convertor anymore or buy a special battery :-)
Jonathan you do what is best for you, it's your show. Love the content and the reviews very informative. Also what is the best hot sauce for a taco?
Yes please change to Tuesdays and like others suggested Tacticool Tuesdays is a good name.
'Airsoftology Tuesdays' is cool!
Regarding the speedsoft part, its not stirring up for the sakr of stirring up. A huge part of airsoft is the realism and that immersive experience, if you have someone running around with a bright pink gun it takes away from the realistic experience and makes it seem like a typical everyday sport..
Love the videos. I always watch even if not my most favorite topic. Keep it up!
What is your opinion on shell ejecting guns, I think they are cool and just about as realistic as you can get but I think they are too over priced for added realism and no one wants to use them in skirmishes because no one want to pick up reusable shells.
At my main field in LA half the people are 12 year old kids with dye i4s and P*s they talk shit and shoot with their middle finger and hold the gun weird they think they are better than anyone else. People at the field play count the dye i4 as a joke what are your thoughts on this
i shoot with my middle finger but i put my pointer finger on the mag release so i dont have to take my finger of the trigger and reload faster but i have been playing for 5-6 years and use only mid-caps but i see what u are saying down here in florida it is allmost the same way
do you play at tac city? because i see that everywhere there
no i play more milsim 1 hour games at dv8
I'm talking about Hollywood sports, but I've seen that at tac city too. I'm actually going tomorrow to HSP.
good look at hsp and call your hits
Hey talk about different buckings and nubs!
I wanna know your favorites and preferences or what works best.
XT60's are great plugs too, I came from the freestyle drone world and we all used XT60's because of the low resistance, high current connections. Dean's are good but the xt60, imo are better
XT30 even better for airsoft, rarely do they draw 30 amps continuously
Tue is cool. I usually watch your vids on Tuesday mornings anyway. Technically Tactical Tool Tips Tuesdays has a nice tongue-twister thing going for it.
Love that Helmet in the background. Is that a Team Wendy Clone? Who does your call sign patches?
Airsoftoligy Mondays every tuesday
Id say yes, I use deans in my tm recoils and my back up g&g, a very reliable connector.
You should move the videos to Tuesday and title them, Tactia-cool Tuesday Tips.
Using XT60 connectors. Soooo much better than Dean's
Tuesdays are cool! Love the show btw. Keep it up.
Witch first airsoft gun should I get for primary around 150 - 200 dollers and what vest and helmet should and do u live in canada cuz I saw u there u got me a 1911 tac
Yah yah yah. Tuesday or Monday. I'm always going to watch them!!!!!!!!
Deans are better in ANY electronic connection. And they perform better then the Xt60 connectors. For example I like to go professional R/C car racing (Hint my profile pic:D) and we need that fast discharge rate (120c-150c) batteries. And deans out class any connector because it has the most contact and it is made out of the best material.
Tuesdays would be great! I NEED HELP THOUGH, is it worth it to get a multi-cam uniform or keep the acu digital camo I already have. Many thanks
Looks green to me
Looking to turn my KWA SR-10 into a high FPS Semi-Auto only platform. I know the answer is debatable but which internal parts would be worth upgrading and which part manufacturers do you reccomend? I love your videos, keep up the good work.
Awesome Video! Thank you again for all the info!
You will be frustrated if you try using a 20 dollar iron. I tried and it didn’t produce enough heat. Bought a 200w soldering gun and I’ve had no problems
So you are saying that running my gun with a 11.1v lipo in a tamiya connector it's basically a mobile fire hazard
Airsoftology Mondays: Is the main topic worth the 5 minutes and 20 seconds of flubgubs?
Tactical Tuesdays with Jonathan "The Beard" Higgs.
sometimes yes, sometimes no. but i still preffer the "mini-tamiya" conectors, they're more safe than deans
Thanks for the info. Has pandered over this for a while.
If you are switching the show to Tuesday, maybe it could be renamed Tactical Tuesdays.
I think Tuesday would be fine for these.
Hey Jonathan, what are some of the first internal/external upgrades that u would make to a more basic mid range airsoft gun? I'm thinking of upgrading my airsoft GI G4 which is a g&g combat machine base. Thank you, and love the show!
Hey Jonathan, in your opinion what is the best company for compression parts? In my opinion its Prometheus. So what do you think?
From my understanding you scramble on Mondays to get these videos up and we don't see them till likely the evening/late night depending on time needed. So in some cases we may not see the video till Tuesday anyways and if it will increase the quality of the video I would be all for it.
As for a name Tac-Tip Tuesdays?
If Krytac says run Lipo 11.1 why did they not take the extra step for deans connectors over tamya connectors?. hmm
American Tactical Defense AIRSOFT because most people dont have deans batteries and believe it or not alot of the younger kids who play airsoft can solder, and honestly tamiyas work ok but deans are just a bit better
Krytac may include a Deans to Tamya adapter which are honestly very cheap. I have a few lying around that I got from Ebay.
American Tactical Defense AIRSOFT same i make them for my friends who cant solder and buy deans batteries
Doesn't Classic Army already do that?
@@americantacticaldefenseair8491 a deans to Tamiya adapter actually makes the problem worse as you have two points of resistance.
deans rock there cheap,easy to install, and are extremely reliable
Can you use a Deans-Tamyia adapter? I know it doesn't solve the resistance, I'm asking about using a Deans battery with a Tamyia airsoft rifle. Would it be ok with using an adapter, if it's ok to change the connector from the rifle?
Still loving the show John!! What are your opinions on the G&G combat machines? Are they still good rifles even the the price is lower?
Im looking for a new pistol and i don't know whether i should get a green gas or a CO2 pistol and why? thanks
well green gas has a lot less power behind it and CO2 is very powerful although you can buy CQB CO2 pistols which have a lower fps. It also depends on where you live, if you live in a cold environment (like I live in Minnesota and its always cold here) Its probably best to get a CO2 pistol. Hope this helps Elves Airsoft
Hi Higgs, thanks for the video🤗 super interesting ! So the question is: if Deans connectors are so efficient and cool, why the hell the big airsoft AEG production companies still use Tamiya connectors ? It doesn’t make any sense to keep evolving the AEGs with new electronics and cool features and keep those less efficient tamiya connectors ! What do you think about that? Thank you 🙏
I think because it is cheaper and tamiya connectors are still very prevalent in the industry. I have noticed that the industry is slowly shifting towards deans connectors. A lot of the newer higher-end entry level AEGs come with deans connectors.
Hey Jonathon I was wondering what are your thoughts about Daytona guns?
I always put electrical tape on my connections. Never had problems!
Thanks pal good to see someone else enjoys a good old fashioned Mexican style taco we got this place called burritoville and they make the bomb tacos!
which plate carrier would you prefer. JPC, 6094A, or cyclone? thanks a bunch :)
tuesday would be fine. maybe call it tech tips Tuesdays
Hey airsoftology, love the show, and I've got a question; I'm running a mostly stock JG m4, only upgrade I've done is upgrading the stock 363mm inner barrel to a 469mm barrel, but my rof is extremely slow. I'm currently running it with a 8.4v nimh battery, and it even seems too slow with that. I've not chronoed it so i dont know the exact rof, also would that big of a barrel increase drop my fps? thanks again, love the show.
What would be a good mid range budget. I love your videos also mid range means full metal nice gear box but not like VFC.
Will you keep warranty if you would do it? Let's say on a brand new scorpion EVO
could you do a video about mosfets? what use they have and what the benefits are?
Pushing to Tuesdays seems fine with me
Is there a problem if I use electrical tape instead of srinking tube?
Will it matter if the dean battery is a high-voltage will it still shoot the same FPS
Do you think polarstar will ever make a polarstar pistol it would be really cool what do you think
I've been playing airsoft since December, and have really gotten into it. It seems to me that I'm missing out on a lot by not knowing how to tech guns, so what is the best way to get into or start learning to work on guns?
Buy an old or cheap gun, go on TH-cam and look how to disassemble the gearbox, and just go off of trial and error
what is a good way of getting in to disassemble and shimming and stuff in gear boxes??? (it's just if you screw up on a okay gun it's allot of money that is lost)
airsoft is very popular here in the Philippines
I was soldering deans on when this came on
Hey John, it's Ben from the 4 year anniversary at ss. (I'm the kid with the gun you signed) I wanna do some upgrades anything you can recommend. No real budget.
Tuesday please
hows "Early Morning Operator" or "Operator Tips"
or just anything with Operator
thanks a ton your one of my favorite channels and make the most hight quality informative stuff on the youtubes
my only problems is theres not enough of you
any way thanks for making my day every other day
real tacos are soft shell not the american hard shell
Then make a Deans VS XT60
Tacosss welcome to mexicooo.. Carnitas!!!
Do you think plate carriers are worth getting if u play cqb or go more mobile with a battle belt
Hey Jonathan, what about using crimp-on but connectors to splice in the Dean's connector, rather than soldering?
+WhoWouldWantThisName Don't use them. They're used by ricers in the automotive world and can easily short out because they actually have exposed contacts plus they themselves have a large amount of resistance in them so it'd be counter productive to crimp on deans connectors. Soldering is very easy, it's very hard to screw anything up unless you put the iron on paper or cardboard or something and start a fire
+acesoftrul3z Thanks
can m4 molle pouches hold m14 mags or should i get pouches made for m14 mags.
thank goodness for fast forward....
Video starts at 1:30
I'm looking to get started in milxim. What are some essentials that i would need to start?
Should I save up to get a polarstar fusion engine or save and get gear and upgrades for my gun I have now?
that shit monitor XD
What is the best milsim for a 16 year old? I've been playing for 4 years and I want to start getting into the milsim side. Thank you
I have full sized JG T3 K3 and want to convert it to a shorty G3, however I can't find the replacement parts (cocking tube, outer barrel, and hand guard). So I was wondering if MP5 parts would work instead?
Yes
Can you please make a video on the Wolverine Airsoft SMP? Love your videos!
Which is better
Classic army m16a4 or echo 1 m16a3?
very good video of describing diffrence between these 2 conectors. When I changed my gearbox and motor for one with stronger spring my tamya connector just burned out. I ran it with 9.6V battery. Do you think its because of that high resistance of tamya connector?
Tamiya connectors are garbage, that's why, they have a very small contact surface and are made of very thin metal, not sure if it's copper even. Deans or XT60 would be a significant upgrade.
Heres a question.... how do I tell if I can upgrade the externals of my gun? I want to put magpul MOE stock, handguards, and pistol grip on my JG m4 basic.
***** Its front wired. Thanks
hey john,
i own the KWA cqr mod 1. the range is crap (it can prob hit the same spot multiple times (accuracy wise) up to 100 feet then the bbs just fall out of the air). i want to upgrade the bucking and if i have to the barrel (i also sooner or later will switch out the air cylinder to the regular 2gx cylinder) what bucking/ bucking barrel combo would you suggest (ive heard that the G&G green bucking is good) also any other mods that might be useful to it (im running a 11.1 15c 1400mah lipo and a backup 11.1 20c 1600mah lipo)
I'm a little bit late but unless you R hop, g&g green bucking does MIRACLES its so damn good.
omg i love dynamic pie
Getting hit on mosquito bites hurt. It's also annoying because I don't know which bump to scratch xD
You scratch all of them.
Hi when does the video start
Great video!