Installing a magnetic door lock with Paxton Switch2 Access Control Unit
ฝัง
- เผยแพร่เมื่อ 6 พ.ย. 2023
- Little video of a maglock installation.
Wiring diagram at the end of the video.
Please subscribe to give me motivation to record more of my projects 😍
For anyone interested items you'd need (affiliate links) -
Disclosure: Some links in this post are affiliate links. I may earn a small commission at no extra cost to you.
Maglock - amzn.to/3ssWxBd | ebay.us/Q8Qzcf
Press to exit button - amzn.to/47kseLR | ebay.us/arTwRf
Emergency break glass - amzn.to/49qCxjC | ebay.us/QYqmdC
Paxton ACU - amzn.to/40nZYpz | ebay.us/oA8ixP
Paxton P50 - Prox reader - amzn.to/3u0Fqap | ebay.us/5jswzB
Paxton switch2 fob pack (make sure they have the black wallet with function cards) - amzn.to/3QMhyzh | ebay.us/gOCzFF
Power supply unit - ebay.us/aTwwhU
Don't bother buying the paxton switch units with a built in psu and housing, these are only designed to power the acu and a strike lock - not maglocks, they will fail. - วิทยาศาสตร์และเทคโนโลยี
![[MPD직캠] 베이비몬스터 치키타 직캠 4K 'LIKE THAT' (BABYMONSTER CHIQUITA FanCam) | @MCOUNTDOWN_2024.6.13](http://i.ytimg.com/vi/h99J4vWm7Ew/mqdefault.jpg)
Very informative video amazing
So nice of you thanks 👌
Could you be able actually show or display a schematics of the connections that would be good
@@nick2207 there is one at 20:55
Sorry must have missed it thanks
Fantastic video! Question, can there be some sort of module to incorporate a computer? Does this project have a computer and do you need a license to access it?
Hi thanks the switch2 is standalone, for pc control you would use the net2 plus version which has a TCP/IP rj45 port and the software is called net2 and is free. Hope that helps
@@Funeve Cheers thanks for the help!
Hi there, is the switch2 capable of powering an electronic lock by looping the 12V into common, and then positive for the lock from nc/no?
Hi Shawn,
The switch2 can come with it's own enclosure and power supply but they are only 1amp which isn't enough to power a maglock. (Tiny one might be ok or a solenoid type lock would be fine)
You'll find the PSUs will die after a while because they can't drive the load.
That's why I used a third party one 🙂 hope that helps ?
And yes you can do what you are asking
@@Funeve that’s helped very much, thanks a lot! Thought it would be the same as Net2 Pro as Ive seen locks powered straight from the controller - assume it outputs the required power where switch2 doesn’t!
@@Funeve sorry, did you suggest that this is possible then?
Also, I’ve seen many ways for locks on controllers to be wired - 12v into com, nc/no to positive on lock, 0v to negative on lock - 12v to nc/no, com to positive on lock, 0v to negative on lock - 12v to positive on lock, 0v to nc/no, com to negative on lock.
Are all of these typically OK providing its giving suitable power to that particular lock?
Any of those methods work, as the relay is just a switch - the 0v is commonly used to drop power to a lock but if your door is metal then it can pick up ground from the building which makes the lock unreliable (it may not unlock, as it's not losing ground) if that makes sense? So you'd switch the 12v instead
Where is fire interface cable port
I didn't film it but the red cable is connected to the relay on a Apollo xp95 input output module
Hi sorry, forgetting the break glass unit, how does the magnet connect to the Paxton module? How does the monitoring work? Is it a 12v positive and negative to magnet then a common and normally closed pair from magnet to Paxton unit? Thanks.
@@mark6098 The paxton has a relay onboard which will open if a correct for or the exit button is pressed, 12v straight to the mag and the negative goes through the Common and normally closed pair on the controller relay to facilitate unlocking.
The monitoring contact on the maglock is just a relay that will change state depending on if the maglock has latched on to the plate or not, this can be used to connect to an alarm input on the controller with a sounder also