Awesome video Scott. If you want a recommendation for a hose you can get the flexzilla 25 ft that it comes with m22 fittings or the 50 ft like I did! 50 ft perform as well as the stock one, you don’t loose any pressure. Now with your pressure washer gun the set up is complete. Thank you.
Do the sunjoe and green works take an M22x15 as compared to the more common m22x14? I got a nee flexzilla hose for my sunjoe and it doesn’t fit right.. thank you. If you could provide a link to what I need would be great
Buy from DPC if you are in Canada! I was a fool and did not...coat me 50 bucks for the gun..and then another 75 for all the connectors to fit the Sunjoe 3001 with an after market hose. Support this man and buy from him!
That's a good tip cause I'm tired of having to whined up the hose and twist the hose on the fittings. I already have a m22 adapter that I used to use to adapter another hose to me more longer. The hose that came with the greenworks is kinda short 20ft but got a different hose that was a little bit longer 25ft.
I have a Walmart Hypertough pressure washer and it's the exact same thing as your green works. I have been wanting to get a longer hose because that 20 footer that came with it isn't long enough and it's very stiff. Now I know what I need to get to upgrade. Thank you.
All are 22m on the OD the thread. Gas is 14 and electric is 15 on the ID. Yeah he missed that! 1/4 and 3/8 are quick connect sizes. I wish they just made it all the same! Good call John!
I've always wanted quick disconnects for my power washer, but I forget to look for these at the store 😂, now this will probably motivate me to finally buy them. Scott we better buy these now because before we know it, the store will raise the prices of the quick disconnect adapters because of you LOL Thank you for all the advice!
I think you can account for that by buying an o-ring down a step to make it fit. I had looked into buying a hose for my Stanley (which I think is a rebranded SunJoe).
@@jasonallen5835 You can get M22-15 to M22-14 connectors from MTM directly fairly cheap. I bought all my connectors from them when I simply wanted QD with OEM hose. I since have upgraded all to MTM spray gun and Lance with Kobrajet hose, best money spent. Now I am looking to replace my AR blue pressure washer to that Comet and use my MTM hardware instead of what comes with the Comet basic package.
@@Smokey_A The Sunjoes have a 15mm male connector on each end of the hose, and the id of the female on the machine and the gun/wand is 15mm. If you buy a 14mm gun (the standard) the 15mm hose will physically not fit inside the gun (hence, you need a coupler 14mm on one end and 15mm on the other). If you buy a 14mm hose (The standard), it will fit inside the sunjoe body and wand but will leak because it's 1mm in diameter too small. Can you replace the o-rings to take up the extra 1mm? Maybe, but personally I'd rather just use a coupler so it doesn't start leaking the minute the o-ring wears. Bottom line is, you have to know what you have and what you are trying to do in order to figure out exactly what you need to make it all work trouble free. Many vendors on Amazon have packages setup to make it easier complete with connection diagrams to help you visualize the whole thing. Just wanted to alert people they can't just go to Lowes can grab anything if the own a Sunjoe or alike.
Can you recommend a hose that doesn’t kink or get stiff under cold weather for the green work, because I’m in NY and the hose that comes with the green works is a nightmare to use. I’d like something a pit more professional. I love your videos by the way.
Mark Hanson Just type flexzilla for pressure washer on the amazon searcher and you’ll see it. Either 25 ft or 50 ft. I have the 50 ft one and it performs really good. Meaning I don’t loose pressure due a longer hose.
SCOTT REALLY ENJOY YOUR VIDEOS THEY ARE VERY INFORMATIVE WANT TO KNOW WHAT POWER WASHER HOSE WOULD YOU RECOMMEND THAT WOULD HOLD UP UNDER A LOT OF USE THANK-YOU SCOTT
Hello i need a little help i have the small one 1700 psi electric and i trying to add a garden hose but i have a hard time to find the fittings to add it and maybe someone help me please
This is a great video! Thanks Scott. I’m looking for a mid-budget hose that maybe doesn’t curl up as much? What would you suggest? I have the stock greenworks hose and it just ends up getting tangled and slapping the paint!!
PER THE AMAZON SELLER THAT YOU LINKED IN YOUR DESCRIPTION : "Attention: M22-14 SWIVEL SELL IS 14mm FITTING. INSIDE DIAMETER IS 14mm, NOT 15mm. If your fitting is 15mm, it may cause leakage. SO NOT FIT electric pressure washer of Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz with M22 15mm fitting."
Scott: this is what I had laying round the house.... Literally every TH-camr: can you provide us a link so we can buy everything exactly like you have it?
I got a nilfisk it said m22 water outlet and bought a new m22 hose to fit to my new gun but for some reason the m22 outlet of my nilfisk is a tad smaller than the m22 hose i bought. Is there different types of m22 sizes or nilfisk is just a jerk for not making it universal m22 and have to buy nilfisk specific products only
I got this machine as well and threw the hose away. I got a pressure hose from home Depot. It's meant for higher pressure washers too, about $120CAD. The hose also comes with the fittings so you don't need to purchase every single piece. The only one you probably need to find is the one that connects to green works which is also located at Home Depot. This is the less headache I found for myself after searching everywhere in my city. Drove and search everywhere online. Wish I did a video for this pressure washer even though it sucks ass
Thanks Scott , for sharing your tips ,,,your pretty knowledgeable ,. And you made a "quick to the point ,.".video ,. There's so many " how to videos " and what I did notice the difference between yours and lots of others is,,, No into music ,,,. And that is way cool! I just gota say ,,,. The music selections lists , seems to be the same list everybody has to pick from ,,,,all sounds the same,. But different in all bad , ear crunching ways ,,, All bad ,,,,it's just all bad ,,,to me ,,,. It will actually make me want to skip the vid, While I'm talking bout this ,,,I did catch a how to vid on building cinder blocks steps ,,,,ANYWAYS,,,. I COULD NOT BELIEVE MY EARS,,,,. THE INTRO WAS THE BEST I EVER HEARD ,,,IT WAS SO GOOD ,. I HAD TO QUICKLY RESTART THE VIDEO ,,,, IT WAS NOTHING LIKE THOSE OTHERS WEVE ALL HEARD WAY TOO MUCH ,,, a variety of "intro noises". That have bout the same level of quality and all equally hard to listen to them and I really can live with out ,,. Is when it plays out during the whole entire video as the person is demonstrating how to skim coat a wall,,,, ANYWAYS ,,, for some reason I just had to get this out and vent for a minute ,,, But back to the one video with cool music intro ,,,was a song the guy chose was not of the usuàl list ,,,,he totally overlooked that one ,,,and it's a song I've heard many times. It's a Eric Clapton song ,,,"Layla" It starts right as you start his vid and plays for 20 seconds and then it's him talking minus that ,,,,you know what Anyways thanks for listening to me ,,,,,I feel better , thanks Oh and thanks for taking the time to show us your , know how
I wrote before i watched the whole video!!! Aaand holy shit!!! Thanks for the info!!always wanted a quick disconnect on mine!!! Be great of u could post links to ebay or amazon for those parts ha.
I have the exact same greenworks PW, I did buy the same fittings for my hose connection, the fittings on lasted about four months before it started leaking, is that the norm with these fittings?
Scott please tell me you relate to this .. when your detailing your car and your green works cheap hose is all tangled and shit and you have to mess with it for a couple minutes the n your good :)
got the same pressure washer but it keeps tripping on and off. might throw it away. anyone else have this problem? i teflon tape everything so no leaks
Hey Scot I used the quick disconnect kit M22 to 3/8 on my greenworks.. I notice there is a whistle noise when letting go of the trigger on my gun.. its coming from the connection on my greenworks. Any way to fix it?
*Now that's my boy Scott ruffling up the feathers of Detailers Mafia somebody in Florida is going to be disturbed. His 'clientele' has money to spend on the equivalent than brains. Your idea is what I currently have and makes 100% more sense than 'stainless steel adaptors' that have to be from EU. Who da F*&^ cares this is a proper set up for me if goes bad SO WHAT I'll buy a new one 10x over and I still will be ahead!!!*
It’s a quick disconnect fitting. You can disconnect quickly. The threads on the hose and pressure washer are often recessed and hard to access. And the metal threads tend to corrode and create friction. The WC just snaps in place with no threads and no twisting. Much much easier. And the QC add swivel to both ends of hose which really cuts down on twisted hoses.
It's worth the extra money to get brass fittings instead of zinc. The zinc corrodes and seizes up in no time. They're a false economy when you're talking one season vs. years of use.
There is a kit at Lowes for $19 that has all the fittings and a garden hose quick disconnect all packaged together
IIIsticksone .. l bought one. You’ll find It in the power washer section and not in the ‘fitting’ section where all the sprinkler stuff is at.
So this will allow me to this ?
I bought the Amazon equivalent. Listed as a m22x14 kit ... get the package. Males are m22x14... female QD’s are 15 mm.
@@Jeeper1378 link?
LOL. LOVE THIS. I love that your not obsessed about these kind of things.
Hose, nipple, she’s nice and tight, screw it, always ready, I wish I had 2 of these....careful Scott, this is a family channel
I have this, I upgraded the house and added a foam cannon gun and it works fantastic.
"Now my greenworks looks happy and always ready to go" makes me laugh everytime I think about it. Thanks Scott for the great videos.
Awesome video Scott. If you want a recommendation for a hose you can get the flexzilla 25 ft that it comes with m22 fittings or the 50 ft like I did! 50 ft perform as well as the stock one, you don’t loose any pressure. Now with your pressure washer gun the set up is complete. Thank you.
Did this last year. I got tired of screwing the hoses on (that sounds dirty lol) so I got a quick connect kit from HD.
Do the sunjoe and green works take an M22x15 as compared to the more common m22x14? I got a nee flexzilla hose for my sunjoe and it doesn’t fit right.. thank you. If you could provide a link to what I need would be great
“ now my greenworks looks happy, it’s always ready to go.” Lol
Lmao I loved that comment 😂
Perfect! This is exactly what I wanted.. the one thing I dislike is how I have to unscrew the hose from the washer each time I use it.
Thanks Scott. Really enjoy your informative videos
That's what I did to my Greenworks 1600 psi pressure washer. I picked up the black rubber 25' hose & got those fittings. Love it.
Buy from DPC if you are in Canada! I was a fool and did not...coat me 50 bucks for the gun..and then another 75 for all the connectors to fit the Sunjoe 3001 with an after market hose. Support this man and buy from him!
Those connectors are everything!!
That's a good tip cause I'm tired of having to whined up the hose and twist the hose on the fittings. I already have a m22 adapter that I used to use to adapter another hose to me more longer. The hose that came with the greenworks is kinda short 20ft but got a different hose that was a little bit longer 25ft.
We use all quick fittings with our power washers and me as well with my small electric power washer at home. Great video Scott
I have a Walmart Hypertough pressure washer and it's the exact same thing as your green works. I have been wanting to get a longer hose because that 20 footer that came with it isn't long enough and it's very stiff. Now I know what I need to get to upgrade. Thank you.
Thumbs up for my hose STILL being in good shape.
You’re a great guy Scott ! Love the videos
I believe the Sun Joe takes a 15mm thread. Amazon has some of these as well.
All are 22m on the OD the thread. Gas is 14 and electric is 15 on the ID. Yeah he missed that! 1/4 and 3/8 are quick connect sizes. I wish they just made it all the same! Good call John!
@@Matsci101 Thanks for breaking down which is which. I knew they had 2 different sizes but not which ones.
The Active im gettin is 15mm. More are 15’s now.
Thank you Scott. Been trying to find out the fittings needed so I can put on my sunjoe. Can't wait to get the gun from you.
I've always wanted quick disconnects for my power washer, but I forget to look for these at the store 😂, now this will probably motivate me to finally buy them.
Scott we better buy these now because before we know it, the store will raise the prices of the quick disconnect adapters because of you LOL
Thank you for all the advice!
Please please please tell what is the connector type and size on the gun itself. Been trying to figure it out for weeks.
Love your videos very knowledgeable about Mobile Detailing love it you need your own show on t.v.👍🏽
This was a genius of a idea for a video. Good stuff .
It’s a $20 kit at Lowe’s with all the right quick connects. Screw the fittings on once and forget about it. That’s al there is to it
Can you tell us what that other thing is that your house is wrapped around to the left of the green works thing?
I have the 1600 psi version its solid. Im gonna get that small gun just so I can clean my wheel wells better.
i got a stuck plastic hose coupler pressure washer end help or suggestions please?
The Sunjoe SPX3000 uses a non-standard M22-15mm. Others use M22-14mm Beware. They are not interchangeable. A 14mm in a 15mm will leak.
I think you can account for that by buying an o-ring down a step to make it fit. I had looked into buying a hose for my Stanley (which I think is a rebranded SunJoe).
Yep...tried to buy the fittings from Lowes last night...had to return them today!
@@jasonallen5835 You can get M22-15 to M22-14 connectors from MTM directly fairly cheap. I bought all my connectors from them when I simply wanted QD with OEM hose. I since have upgraded all to MTM spray gun and Lance with Kobrajet hose, best money spent. Now I am looking to replace my AR blue pressure washer to that Comet and use my MTM hardware instead of what comes with the Comet basic package.
@@Smokey_A The Sunjoes have a 15mm male connector on each end of the hose, and the id of the female on the machine and the gun/wand is 15mm. If you buy a 14mm gun (the standard) the 15mm hose will physically not fit inside the gun (hence, you need a coupler 14mm on one end and 15mm on the other). If you buy a 14mm hose (The standard), it will fit inside the sunjoe body and wand but will leak because it's 1mm in diameter too small. Can you replace the o-rings to take up the extra 1mm? Maybe, but personally I'd rather just use a coupler so it doesn't start leaking the minute the o-ring wears. Bottom line is, you have to know what you have and what you are trying to do in order to figure out exactly what you need to make it all work trouble free. Many vendors on Amazon have packages setup to make it easier complete with connection diagrams to help you visualize the whole thing. Just wanted to alert people they can't just go to Lowes can grab anything if the own a Sunjoe or alike.
Ebay has the m22x15 to 3/8 connector, the gun input. Couldn't find it on Amazon...
Can you recommend a hose that doesn’t kink or get stiff under cold weather for the green work, because I’m in NY and the hose that comes with the green works is a nightmare to use. I’d like something a pit more professional. I love your videos by the way.
You can get the flexzilla either 25 ft or 50 ft on amazon. You will love it.
Hey thanks I’ll take a look at it
What size? What model number? I have a SunJoe 3000. Thanks
Mark Hanson Just type flexzilla for pressure washer on the amazon searcher and you’ll see it. Either 25 ft or 50 ft. I have the 50 ft one and it performs really good. Meaning I don’t loose pressure due a longer hose.
Great thankyou for replying
M22/14 vs.M22/15 will leak, so just be sure to get the right adapter, otherwise it will drive you nuts .
What is the green attachment on the right side
"Now my greeworks looks happy" haha
It’s very convenient but after testing I concluded the nipple on 3/8 slows down the GPM water flow significantly
You’re rocking my world Scott
SCOTT REALLY ENJOY YOUR VIDEOS THEY ARE VERY INFORMATIVE WANT TO KNOW WHAT POWER WASHER HOSE WOULD YOU RECOMMEND THAT WOULD HOLD UP UNDER A LOT OF USE THANK-YOU SCOTT
Mines won’t come off. How do I take it off so I can replace hose?
What size is the quick connect for the water inlet/hose end? 3/8 is absolutely too large, unless the manufacturer screwed mine up.
What brand pressure washer is the gray one with the reel ?
Thank you buddy for explaining it to me love you guy
I bought the Flexzilla 50ft hose for mine great hose for the price!
Same just waiting on my fittings
Hello i need a little help i have the small one 1700 psi electric and i trying to add a garden hose but i have a hard time to find the fittings to add it and maybe someone help me please
This is a great video! Thanks Scott. I’m looking for a mid-budget hose that maybe doesn’t curl up as much? What would you suggest? I have the stock greenworks hose and it just ends up getting tangled and slapping the paint!!
I got flexzilla rubber. It doesn't resist coiling. Coils nicely very flexible
Getting the quick disconnects will allow the hose to swivel, limiting chance of coiling on you
Scout i bought two of those green works u show on video they always leak on me wear the hose connects
Gas washers are M22x14 and most electric are M22x15 so that's why your leaking the 15 fittings are more rare I havent seen them in stores only amazon
Great video Scott like always!
How can i fix pressure washer pipe is on to
What size hose is it? That's smaller than a reg power wash hose
Hello Scott, I have a question.. i have a realm 2000psi and I really want to change the water hose to be longer, is there a way to do that?
What was wrong with the green-works wand that cam with it? Have gas, thinking about this one for just the car
Scott which adapters did you use for the inlet and outlet of your MV925? I didn't realize it came with nothing..
PER THE AMAZON SELLER THAT YOU LINKED IN YOUR DESCRIPTION :
"Attention: M22-14 SWIVEL SELL IS 14mm FITTING. INSIDE DIAMETER IS 14mm, NOT 15mm. If your fitting is 15mm, it may cause leakage. SO NOT FIT electric pressure washer of Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz with M22 15mm fitting."
Stfu karen
@@friendlymisanthropetv you wouldn’t talk with all the energy In person I promise you that you would go missing hahahah
@@friendlymisanthropetv send me your address I will gladly put you on the news
@@friendlymisanthropetv hurry up old bitch
Scott: this is what I had laying round the house....
Literally every TH-camr: can you provide us a link so we can buy everything exactly like you have it?
I like your videos definitely can use and use alot from what you post
I got a nilfisk it said m22 water outlet and bought a new m22 hose to fit to my new gun but for some reason the m22 outlet of my nilfisk is a tad smaller than the m22 hose i bought. Is there different types of m22 sizes or nilfisk is just a jerk for not making it universal m22 and have to buy nilfisk specific products only
Thanks for this Scott! Exactly what I was looking for.
Could u recommend a better those for it? Thenone that comes with it sucks in my opinion.
I got this machine as well and threw the hose away. I got a pressure hose from home Depot. It's meant for higher pressure washers too, about $120CAD. The hose also comes with the fittings so you don't need to purchase every single piece. The only one you probably need to find is the one that connects to green works which is also located at Home Depot. This is the less headache I found for myself after searching everywhere in my city. Drove and search everywhere online. Wish I did a video for this pressure washer even though it sucks ass
Was the green works m22 14mm or 15mm?
Same one i got! It works pretty good for me.
Awesome video.
Is the greenworks 2000psi as good both 2000psi are on sale at Walmart or this is this one just as good.
Scott, how many gallons is that air compressor back there
Any news on the Meguiars Wheel and Paint Iron Decon?
Which Flexzilla should I get? I have a SunJoe 3000. Is there a model number? What width?
Freaking awesome and thanks for sharing this video.
Thanks Scott , for sharing your tips ,,,your pretty knowledgeable ,. And you made a "quick to the point ,.".video ,. There's so many " how to videos " and what I did notice the difference between yours and lots of others is,,,
No into music ,,,. And that is way cool! I just gota say ,,,. The music selections lists , seems to be the same list everybody has to pick from ,,,,all sounds the same,. But different in all bad , ear crunching ways ,,,
All bad ,,,,it's just all bad ,,,to me ,,,. It will actually make me want to skip the vid,
While I'm talking bout this ,,,I did catch a how to vid on building cinder blocks steps ,,,,ANYWAYS,,,. I COULD NOT BELIEVE MY EARS,,,,. THE INTRO WAS THE BEST I EVER HEARD ,,,IT WAS SO GOOD ,. I HAD TO QUICKLY RESTART THE VIDEO ,,,,
IT WAS NOTHING LIKE THOSE OTHERS WEVE ALL HEARD WAY TOO MUCH ,,, a variety of "intro noises". That have bout the same level of quality and all equally hard to listen to them and I really can live with out ,,. Is when it plays out during the whole entire video as the person is demonstrating how to skim coat a wall,,,,
ANYWAYS ,,, for some reason I just had to get this out and vent for a minute ,,,
But back to the one video with cool music intro ,,,was a song the guy chose was not of the usuàl list ,,,,he totally overlooked that one ,,,and it's a song I've heard many times. It's a Eric Clapton song ,,,"Layla"
It starts right as you start his vid and plays for 20 seconds and then it's him talking minus that ,,,,you know what
Anyways thanks for listening to me ,,,,,I feel better , thanks
Oh and thanks for taking the time to show us your , know how
I wrote before i watched the whole video!!! Aaand holy shit!!! Thanks for the info!!always wanted a quick disconnect on mine!!! Be great of u could post links to ebay or amazon for those parts ha.
Jdmtunerlover You can get them at Home Depot. That’s where I bought mine.
Be ready to spend around $30 for all the fittings.
SCOTT IS THE ANSWER TO THE WATER SPOTING ( DISTILLED WATER ) ?
I have the exact same greenworks PW, I did buy the same fittings for my hose connection, the fittings on lasted about four months before it started leaking, is that the norm with these fittings?
Scott do you use products as meguiars show car glaze? In what scenario?
Scott please tell me you relate to this .. when your detailing your car and your green works cheap hose is all tangled and shit and you have to mess with it for a couple minutes the n your good :)
The fittings in this video give the hose the ability to swivel on each end = much less tangles
Hey I bought a 7”polisher an some one told me that it is to much power to polish, compound,an Wax a car is it to big or powerful what do you 🤔 think.
FYI
Electric = pressure washers are m22-15
Gas = pressure washers are m22-14
actually not all electric pw are m22-15. sunjoe, ar blue are, but ryobi greenworks are m22-14
Karcher is also m22 14, but spot on. The 15mm m22 are much harder to get.
When using a sun joe you will need to change to a thicker o ring or you will have water everywhere
Down Under Garage Amazon has BOTH sizes.
I want the fitting for the water hose. I keep my gun hose always attached to my GW
got the same pressure washer but it keeps tripping on and off. might throw it away. anyone else have this problem? i teflon tape everything so no leaks
Hi Scott,where can get good hose,all the fittings from,can u help me out please? Thank you!
home depot has everything you need. threaded fittings are m22. quick connect are 3/8
ryan costa thank you for information!
How about a recommendation on reasonably-priced hose?
Did u find a reasonably priced hose? Lol
"she's tight and ready"
I see what you did there 😅
Hey Scot I used the quick disconnect kit M22 to 3/8 on my greenworks..
I notice there is a whistle noise when letting go of the trigger on my gun.. its coming from the connection on my greenworks. Any way to fix it?
You sure you got m22x15? I've only seen 14 in stores as they are more common for gas
Great vid.
Mine just went out today, it doesn’t click when I turn it on. How to fix it ?
The motors on these cheap electric pressure washers die young and without warning. If you get 3 years of moderate use you are about average.
"boy she's nice and tight and ready to go" goddamn Scott 😉
I also need sizes,quantity of fittings.
I own one as well, it’s awesome !!!
Scott what hose do you recommend
This pressure washer was pretty bad for me lol. Leaking water first month of usage. Wasn't from the hose either. From the machine itself.
Great video buddy onr detailing news
Great Idea.
*Now that's my boy Scott ruffling up the feathers of Detailers Mafia somebody in Florida is going to be disturbed. His 'clientele' has money to spend on the equivalent than brains. Your idea is what I currently have and makes 100% more sense than 'stainless steel adaptors' that have to be from EU. Who da F*&^ cares this is a proper set up for me if goes bad SO WHAT I'll buy a new one 10x over and I still will be ahead!!!*
When using a sun joe you will need to change to a thicker o ring or you will have water everywhere
25 sec. OMG, ROLLING!
Matt will upgrade for $500
Thanks!
I hate my sunjoe Pressure washer because of the odd size fitting
Thank you
nice and easy
What does this upgrade improve?
It’s a quick disconnect
fitting. You can disconnect quickly.
The threads on the hose and pressure washer are often recessed and hard to access. And the metal threads tend to corrode and create friction.
The WC just snaps in place with no threads and no twisting. Much much easier. And the QC add swivel to both ends of hose which really cuts down on twisted hoses.
its a m22 15 connection
Thks
It's worth the extra money to get brass fittings instead of zinc. The zinc corrodes and seizes up in no time. They're a false economy when you're talking one season vs. years of use.
Is this obsessed garage jr channel now? 🤔🤔🤔
I believe he would want to sell you everything for about 300 dollars just to repair the hose...lol
No thank you, I can get everything for less!
Kevin; it’s always cheaper to let someone else do all the work and then steal the ideas as if they are your own.