My Favorite Sink Tool! Basin Buddy plus Wera Zyklop!

แชร์
ฝัง
  • เผยแพร่เมื่อ 13 ต.ค. 2019
  • Superior Tools Basin Buddy plus Wera Zyklop Ratchet!
    These Links are Affiliate Links and we will earn a small commission by you using them at no additional cost to you! Thank you for supporting our channel!
    America’s Number 1 German Tool Distributor! KC Tool
    Get your Knipex, Wera, Wiha etc here:
    www.kctoolco.com/?rfsn=513734... (KC Tool Affiliate)
    Camera Gear Used On My Channel:
    Sony ZV-1 Camera: amzn.to/34a4o83 (Amazon)
    Rode Videomic NTG Shotgun Mic Bundle: amzn.to/356ec22 (Amazon)
    MannFrotto Pixie Evo Tripod: amzn.to/31iMjmr (Amazon)
    Rode Wireless Go System for a Lavalier or Boomed Mic
  • บันเทิง

ความคิดเห็น • 39

  • @MillisConstruction
    @MillisConstruction  4 ปีที่แล้ว +1

    Here is an affiliate link to the Wera Zyklop amzn.to/2MdyBdf
    Here is the Basin Buddy
    amzn.to/2VFDGyf

    • @tylerfelix4558
      @tylerfelix4558 4 ปีที่แล้ว

      Millis Construction so I have the 3/8 version of that ratchet. Mine has an issue with the lock not staying locked when I use it like a screwdriver. Do you have that issue with the 1/4in ratchet as well?

    • @MillisConstruction
      @MillisConstruction  4 ปีที่แล้ว

      Tyler Felix I haven’t had that happen to me yet.

  • @joeyb7373
    @joeyb7373 3 ปีที่แล้ว +1

    Using the correct tools for the job is worth every penny.

  • @garyfu6143
    @garyfu6143 2 ปีที่แล้ว +1

    I love good working tools. Fit for the job! Thank you.

  • @rexrexford5249
    @rexrexford5249 ปีที่แล้ว +1

    Thanks brother for the advice, very helpful!

  • @kermitefrog64
    @kermitefrog64 3 ปีที่แล้ว +2

    Now if I only had this 2 days ago. I think this is perfect. I do my own work and this is the perfect tool.

  • @AyFok
    @AyFok ปีที่แล้ว

    Super awesome setup! Blew my mind 🙏 cheers

  • @FormerlyKnownAsAndrew
    @FormerlyKnownAsAndrew ปีที่แล้ว +2

    That's a really amazing ratchet! Never seen a design like that.

  • @bricofast
    @bricofast 4 ปีที่แล้ว

    Great video thanks,wera tools 💪💪💪 The best quality and strong tools, lenghts here from Portugal 🇵🇹🇵🇹🇵🇹

  • @danieljohnson6684
    @danieljohnson6684 3 ปีที่แล้ว +2

    The ridged faucet tool is nice too. Just picked this basin buddy up for really tight places. If you haven't used it try it, I find myself using more to shut water off to toilets more than changing faucets.

  • @muniznick
    @muniznick 4 ปีที่แล้ว +1

    Great!, now I have to buy that Wera ratchet to use with my basin buddy.

  • @carletonhoffman
    @carletonhoffman 2 ปีที่แล้ว +2

    thanks, man. i haven't heard anyone use the word deal like that since i left Texas over 50 years ago. i have been going nuts trying to loosen a faucet nut within a confined space where i can't even get a basin wrench to fit around it so i'll have to see how thick the walls are on this tool and i'll also check out the Wera Zyklop.

  • @jamalbenthall151
    @jamalbenthall151 3 ปีที่แล้ว +1

    Very nice video. Thanks

  • @chrisfyfe9212
    @chrisfyfe9212 3 ปีที่แล้ว +1

    Nice !

  • @theconstitutionalist5617
    @theconstitutionalist5617 ปีที่แล้ว

    I’ve split those nuts with drill bit and a flathead, hacksaw, and a nutcracker tool. 1/4 drive as well. In a pinch for those tough nuts. My ridged basins wrench can hook up to a ratchet as well. But I like that setup. I also have those ridged faucet insulation tools, but they flex to much for me.

  • @slayerment
    @slayerment 2 ปีที่แล้ว +1

    Buying both tools. The number of hours I've wasted in those tight spots fighting with those nuts!!

  • @EPSTomcat11
    @EPSTomcat11 4 ปีที่แล้ว

    Thanks so much for this! Brilliant!
    The space I'm working in is very tight and i'm not even sure the basin buddy will fit in it. What is the diameter of the Basin Buddy? I'm working on a kitchen sink btw, not a bathroom sink.

  • @tri-countyhandymanservices6623
    @tri-countyhandymanservices6623 4 ปีที่แล้ว +2

    That looks really useful! When those plastic nuts are large and in tight spots, they are a PAIN to get off! Sometimes I wind up using a flat head screwdriver and a hammer to tap them loose. I might check that out!

  • @ltzmartinez5927
    @ltzmartinez5927 11 หลายเดือนก่อน

    Is this still working for you, all these years later? What's the length on that extension? Really nice setup by the way!

  • @jasonmalicek3808
    @jasonmalicek3808 4 ปีที่แล้ว +2

    I have the same setup but use a cheapo husky swivel how much does the wera run for ?

  • @wsjeefo07
    @wsjeefo07 2 หลายเดือนก่อน

    How cool are you

  • @ryanpinkham6784
    @ryanpinkham6784 3 ปีที่แล้ว +1

    Would you stop selling me tools already🤣?!

  • @vx6883
    @vx6883 4 ปีที่แล้ว

    +

  • @frederickneal4781
    @frederickneal4781 8 หลายเดือนก่อน

    Just go to Harbor Freight and get a similar ratchet wrench

    • @MillisConstruction
      @MillisConstruction  8 หลายเดือนก่อน

      This may not be the channel for you lol. I don’t do Chinese tools.