XR650 Lowering Link and IMS Peg install
ฝัง
- เผยแพร่เมื่อ 9 พ.ย. 2022
- Lowering Link:
a.co/d/97R0nMY
IMS Pegs:
a.co/d/inlgm2F
In this week's video Wesley messes with his bike a little and adds some things. Thanks so much for watching and following along!
A good rule of thumb with that rear suspension is 1 inch or so rear sag, when brought off the stand. Then 3" of sag with the primary rider on board. Do one inch on the forks and no more. That's 3/4 more than you have in this vid. It will have zero impact on your signal lights and such. You will find that it also makes the bike turn sharper. A plus for you! You can then make the bike sag down a little more by turning down the rear shock's pre-load adjuster. Just turn a few clicks on the adjuster screws and push down and up, on the back of the seat. You can change how fast it goes down, and how fast it comes back up. All this makes a huge, huge difference for you! Hoped this helped. Good luck with the bike.
Great informative video.I went with the Super Stocks on my new 2023 after watching.Big difference!Thanks!
Quality XR video as usual, thanks for sharing.
I took the lowering link off my xr. Even with the preload all the way down it was harsh. Much softer/smoother with the original link back in.
I love all the content, but especially enjoy the xr! 👍
Well this is great because conservatively my height is 5'8" without shoes with some nice big shoes I'd be like 5'10" can't wait to get this bike brand new
Hey brother…that front bolt is inserted on the chain side from the factory. I don’t know why they did this. It was a pain to remove when I did my lowering link. Nice job
Tank you for yours videos, very good information 🔥1️⃣🤝🥇🇺🇸🤜🤛👍🏍️
You have such a cool place.
Great video, thank you for sharing, did either bolt interfere with the chain?
I need to get me some new pegs for mine as like you were talking about trying to find a comfortable spot standing.
The Wild Roosters in Mexico are as Tall as an XR650L.
Im 5,7 inches I lowered the front forks a lot I don’t have a lowering link I just compressed the rear suspension and loosen the front forks, now I reach like you if I sit all the way up to the tank. a link would definitely help a lot on the stop lights or anywhere I need stand on the bike
Awesome channel, love your videos!! Was in your area couple of years ago, went to Laurel coming from the Gulf, nice area! I live in Kansas City Missouri!
Greetings,
it is more important to be able to flat foot the bike than suspension travel ! believe me !
how do you like that seat concepts compared to stock?
Love the flag
Great video. Thanks for sharing the info with us. I’m putting a XR 650L together for a Border to Border Continental Divide ride. The pros of the lowering kit are solid. Do you feel there were any Cons to lowering the bike?
I noticed when you sat on the bike that your rear spring could use some adjusting assuming you weigh about 170lbs…it looked a bit stiff for your weight. I lowered my front forks similar to yours about 1.25” rides level and stable.