Woodturning the worst piece of firewood, with no tear-out using just my carbides
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- In this video, I am turning a bowl from a piece of firewood, using my Carbide Woodturning tools. More tips not to be missed.
This video is aimed at new turners using my Carbide Chisels.
To buy any of my tools or cutters visit my website;
ukwoodcraftand...
Thanks for watching.
Please Note;
These videos are meant for the purposes of entertainment. Any attempt to imitate or copy what I do must be done at your own risk. My practices may not always be correct or the safest for you. I strongly recommend that you find your own way of turning. You are responsible for your own safety while woodworking. Read and understand the operation and safety manuals supplied with your tools and machinery to ensure you are safe while using such equipment.
![ตีสิบเดย์ [FULL] | นางเอกหมอลำเงินล้าน "อุ๋งอิ๋ง เพชรบ้านแพง" & ไฮโซสาวสุดฮอต "ลิลลี่ เหงียน"](http://i.ytimg.com/vi/jPxQS_EgrJ4/mqdefault.jpg)
![POLYCAT - ข้อความรูปยิ้ม [Music Video]](http://i.ytimg.com/vi/lBhIgPGCgbI/mqdefault.jpg)
![[TH] 2024 PMSL SEA Finals D1 | Fall | ยิงต้องโหด ให้เหมือนโกรธกันมาก่อน](http://i.ytimg.com/vi/OnTdfGySmds/mqdefault.jpg)
Glenn and Liza that wee bowl turned out really lovely even although it was puncky wood, some lovely spolting as well.
Amazing what you can get from a bit of firewood.
That turned out AWESOME. The lessons you've been teaching us have been a blessing. Today, my square carbide did things others say it can't do and shaving were flying everywhere. I keep watching your videos I'll have a PHD in carbideology🤣
Welcome to the dark side. May the carbide force be with you.
@@glennteagleofukwoodcraftca5308 🤣🤣
Make a video of how to make your sanding paste! Another great video
Hiya folks, more proof that the Carbide naysayers are wrong. A beautiful finish can be achieved using "scrapers!" Obviously the right person turning helps a bit so please keep on teaching us. During the video you mentioned a company six hours away that supplies you with wood, i heard it as Stonebase but can't find them on line... Could you please let me have a linnk to them? Thanks and my brand new SCH5 is SUPERB!
Hi James, it was Styles and Bates but they are closing down at the end of March. Carbide woodturning tools are only scrapers, if they are used as scrapers. Glad you are enjoying using your SCH5.
Your demonstration is 1st class Glenn
When you make your next batch of sanding paste make me one mate 😂
Thank you. 😛
Or even do a video so we can make our own.
As always both a great and informative video. I reccomnended your carbite chisels to friends and they have just ordered your standard set and ultimate hollowed. Yet another convert.
@@davidtyers4903 Thanks David. Welcome to the dark side. May the carbide force be with you.
@@davidtyers4903 There are too many people who copy ideas and like to claim it as their own. It works for me, the way I turn.
Your a great teacher, so very positive. Thanks
Thank you. Much appreciated.
Greetings from Australia . A true crafts man and I am glad to find another carbide turner
Welcome to the channel. Thank you for your comment. Well appreciated.
Masterpiece from firewood
Great job
Thanks Alan
Well done Glen, you should have been a magician.
What? I am.
Nice! I have a really punky piece of birch I'm going to try!
Let me know how you get on.
You should do a workshop tour , that would be interesting
Oh no, can't give all my secrets away.
Thanks, Glenn, for answering my query on sanding paste, and incidentally, the reason for using sanding sealer. The instructions that come with these sort of products always say 'how' to use them, but rarely explain 'why'. After watching your last couple of videos I am casting covetous eyes on my pal's open fire woodpile. You really proved your points about how to achieve fine finishes, and I do hope you keep that very pretty little bowl - which I'm sure Lisa won't let you put on the fire. May I also add what a splendid job Lisa does with the camera, always getting us the best view by constantly changing position and zoom, as you caress the wood to its final shape. Did she have professional training - or is it just natural talent?
Thanks Don. Yes, Liza did make me keep the bowl. 🤪I thought she would. Don, it's pure luck she can video. Lol. No honestly, she is doing a good job. I had made an arm to hold the camera, so I could film myself turning, but it's awkward as I can't see if I am getting in the way of the camera sometimes. Liza finds using the tripod better as she can follow me and get in closer to get those close up shots.
Hi Glenn and Liza another great video and a good laugh too
I must admit I'm doing a lot less sanding now and turning a lot better keep the videos coming
Nice one. Less sanding. Save our beaches.
nice one Glen, amazing what you can find in the firewood pile!
It really is Gary. Cheaper too.
Hi Glenn bought a set of your carbide’s a few years ago since you been on TH-cam I have learned to use them better would be nice to see you make a set
No Roy, that's my business, my livelihood. TH-cam is just an avenue to show people who have bought my chisels, how to use them correctly and how they can get clean, smooth finishes.
Nicely done again Glenn
Thank you Barry
Aced again you guys, top, top video 😊
Thanks P.
I loved watching this video Glenn, but is there a reason why you didn’t use the SCH 3 on the inside of the bowl? Keep them coming guys. Bill.
It was because of the cut I wanted to demonstrate.
Very impressive result for such a nasty piece of wood! I might have missed something on a previous video, but what is going on with the sandpaper? You don't seem to be changing grits at all, but the result would suggest otherwise...
Well I do keep telling people how good I am. The proof is visible. My method works. I do say when I'm changing grit. I go from 180 to 320, sometimes to 400. The sanding paste does the rest. It has been mentioned a few times about my sanding. But how can you explain the finish I get?
@@glennteagleofukwoodcraftca5308 I am even more confused now
@@Anilm3 He has a pre-prepared stack of strips of gradually increasing grit numbers of sandpaper on the lathe bed, and swaps them off camera. They are all the same brand/colour so it appears that he is using just one strip for the whole process prior to the sanding paste.
@@donjohnson24 Thank you, that makes more sense.
It might be punky Glenn but it sure is pretty. You sure do a nice job with the carbide gauges. You said you make your own sanding paste if you don't mind me asking what goes into making it. Blessings to you and Liza
That is my own paste. I don't give the details out. Plenty available around.
Amazing video glen. Sorry been on this one since late last night. Jumping over to today's video. I have an abundance of this kinda wood so certainly something i can practice with. I no you say its going in fire but take that one what kinda price would you put that at?? 🏴👍🤔 Oh and can u make have u made a video on your paste finish??
Thanks Michael. I don't sell these sorts of things. Only doing them for the channel. No, I won't be making any videos on the pastes I use or how I make my chisels.
@@glennteagleofukwoodcraftca5308 no worries worth asking about the paste. I'll need figure something else out to use instead if ever needed. 🏴👍
@@michaelwillson6847 Mine I make myself. It works for me, the way I turn.
hello Glen , Lisa and of corse the dogs
can i ask will you ever be doing a video on the way you make your waxes and paste ?
or is this one of those if i tell ya , ive got to kill you type deals.
i have watched a couple of vids on the process but i found them to be a bit confusing in the way that they were explained.
just curious thats all.
well am off now
Thank you for yet another great video LISA
please give the dogs a pat from me
No Ade, there are too many people who take other's ideas and claim it as their own. I make mine as it works for me, the way I turn, at speed.
did you have to do any grinding on your carbide tool holders to allow you to "ride the bevel" or was there enough clearance on the original handles?
If you buy tools from the website, they are made to do the cuts I do.
Great job on these videos. I have been watching for a couple of months now :)
I have been looking at your face shield with the filters and have not been able to find any like your.
What brand is that if you don't mind? thank you
I have a video on the Axminster APF 10 Evolution Powered Respirator. Link at th-cam.com/video/HRskMIZEj4E/w-d-xo.html
Is the formular and procedure for making your sanding paste a secret or will you share it.
No I won't share it. Too many people want to take your ideas and call it their own unfortunately. It works for me, for how I turn. Can't give all my secrets away, otherwise everyone would be as good as me. 😀😛
@@glennteagleofukwoodcraftca5308 if you make it we will buy it 😂
Question what is sanding sealer .I use oil,shellac and finally beeswax .
#BASE CAMP MASK