How to Replace Control Arm Bushings 2012-2016 Subaru Impreza
ฝัง
- เผยแพร่เมื่อ 11 ธ.ค. 2023
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/562/et/control-arms
This video shows you how to install a new control arm bushing on your 2012-2016 Subaru Impreza. Rubber bushings help smooth out a ride, but are susceptible to wear or drying out and crumbling over time. This bushing is replaceable separate from the control arm, and you can replace it yourself.
This process should be similar on the following vehicles:
2012 Subaru Impreza
2013 Subaru Impreza
2014 Subaru Impreza
2015 Subaru Impreza
2016 Subaru Impreza
Tools you will need:
• Pry Bar 1aau.to/o2S/1AXAA00020
• 14mm Wrench 1aau.to/o5j/1AXAA00010
• 17mm Wrench 1aau.to/o5j/1AXAA00010
• 14mm Socket 1aau.to/obMW/1AXAA00015
• 17mm Socket 1aau.to/obMW/1AXAA00015
• 19mm Socket 1aau.to/oatu/1AXAA00043
• 32mm Socket 1aau.to/ods/1AAST00003
• Air Compressor
• Pickle Fork
• Press
• Pliers
• Air Chisel 1aau.to/ocd/1AXAA00270
• Ratchet 1aau.to/obRs/1AXAA00016
• Socket Driver
• Torque Wrench 1aau.to/oaUX/1AXAA00044
• Gloves 1aau.to/oaAS/1AXSS00048
• Liquid Thread Locker
• Safety Glasses
• Sandpaper
• 5mm Hex Socket
• 5mm Hex Wrench
• Floor Jack 1aau.to/oai6/1AXAA00068
• Hammer
• Jack Stands 1aau.to/o7j/1AXAA00065
• Pole Jack
• Punch
• Small Hook
• Vise
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - ยานยนต์และพาหนะ
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Why didn’t you press the old bush out
Thank you, I don't know what I'd do without TH-cam University
Located behind the rear wheel?
You have links for everything but the bushings, and their site doesn't show any bushings, only the control arms with the bushings included. LL : )
Would this similarly apply to a gen 3 Impreza? I have a 09 impreza
+@Snottco This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-TRQ
Not a good choice to use the air chisel to remove the bushing - you just damaged the housing for the bushing. Pressing the bushing out is the safer, less destructive method. Also the axle doesn't need to be removed. Watch Mr Subaru. He goes thru the same procedure and shows how to correctly line up the bushing in the control arm without marking / damaging the control arm.
You removed those lugs wrong
no need to take the driveshaft off and cut the big bush with a hacksaw just enough to cut through the steel ring then just hit it with a hammer and it falls out rather than batter the arm with an air chisel , butcher at work lol