Got one of the II version on the way, finally, arrives Monday! Have been waiting ages for this thing. Thanks for doing the walkthrough. Looking forward to playing with DOCS. It seems overall the C7H vs SGII bios changes are minimal, only removing some of the super niche features that are used by very few people. Coming from a C7H which will not run 1833+ Fclock without issues. Benches fine out to 2000, but it's not stable in all programs. Really hoping the x470 to x570(s) upgrade, newer bios revisions, and DOCS paired with chilled water lets me finally get this 5950x to run at its' full potential.
I've seen on some videos that seem to indicate that there is a setting in the bios which allows the cpu to raise in frequency as needed up to its max boost clock so long as temperature constraints are being met. I'm feeling a little lost inside my x570-e bios- first time working with such a modern uefi mobo. Could you point me in the right direction?
Thank you for the tutorial! Got a question tho if you don’t mind. I have the exact same CPU as in your build and I’ve noticed that your CPU temperature in BIOS is 38-39 degrees, while mine is 48-49 degrees. My cooler is noctua-d15s, so technically it should keep the cpu cool. Yet there is a 10 degree difference between our builds, what do you think might be the reason for that? Maybe I have applied to much thermal paste or screwed the cooler to tightly?
I’ve also noticed that my cpu fan speed is 860 RPM, while yours is 1920 RPM, so I guess that it has the impact as well. If that is the reason, is it possible to increase the cpu fan speed in the bios? Is it necessary to do so?
@@assasssin5328 The fan speed could be the reason. I tested this in a 22*C basement. it was on a 360 rad cooler which will take a lot longer to heat up. What is your temps when you stress test or playing a game or doing a heavy workload? I am more concerned about that then the idle temp. At idle I look for a balance between quite and cool.
@@GrayaOverload Hi, thanks for replying. I stress tested my CPU with Cinebench and AMD ryzen master and got 60-63 degrees at default. However, CPU power, TDC and EDC were at max (they were red). TDC and EDC were at 100% at their max and their indicators turned red. CPU power was just red. PPT was yellow at around 89%. I'm not sure if it is ok or not that they are red and yellow cause I have seen JayzTwoCents tutorial on how to test your PC and most of his indicators were green. He also used Precision Boost Overdrive, I tried to do the same thing but it only increased the cpu temps to 85 degress (I guess it is normal for PBO) and PPT tuned green as well, other indicators stayed at red (except TDC that turned yellow at 84%). So I decided to turn everything back to default. Just in case if it is crucial, I didn't do any overclocking on my CPU.
@@assasssin5328 For thoes being red i would only worry if the mobo can't handle it. If VRM termps going up then I would be concerned. I have a question about what case you have? Another question is do you have the latest chipset driver?
Hi, I noticed your +5V voltage is a solid 5.020. My pc crashes and restarts when I try to play a game, I checked my bios and noticed my +5V was occasionally 4.538 and constantly dipping below it, flashing red. Could that be the reason for the sudden crash and restart? I'm using Corsair RM850 PSU. Thank you
Is there anything in this boards BIOS that would enable or Disable any given PCIe port? I just got one of these and my Graphics Card only seems to want to work on Slot 2 but not Slot 1.
Not that i can recall. When I built the computer for my friend it was in slot 1. you can always reset bios back to default and see if that fixes it. Or try a different bios version.
I have the same mother board on a new setup but when run windows I don't see any option for Wi-Fi / doesn't work. I also did the install without key number do you think that would affect that? please help and thank you
The motherboard RGB no longer lights up, Armoury Crate/ Aura Sync/ iCue doesn't detect my motherboard, and the LED EC1 Version is blank in my Bios settings. Does anyone know why my LED EC1 line is blank because that's what I think is causing the problems? (I've also removed the motherboard and made sure the Led1_Con cable was securely connected, but still nothing)
@@GrayaOverload I actually flashed the bios on Saturday and still the same thing. I didn’t update to the latest one though because that was is still a beta. My current bios is 4204.
Hey, Would the Corsair CMW16GX4M2C3200C16 Vengeance RGB PRO 16 GB (2 x 8 GB) DDR4 3200 MHz C16 XMP 2.0 be fully compatible with this motherboard? Thanks in advance if you reply to my question.
That should be. ASUS does have a memory compatibility on this board under support. rog.asus.com/motherboards/rog-strix/rog-strix-x570-e-gaming-wifi-ii-model/helpdesk_qvl_memory
@@Mars-lf1pz I would enable XMP. After enabling it check to make sure your comptuer is stable. Sometimes you can have issues rare but I would keep and eye on for a while.
@@GrayaOverload I tried enabling XMP I & XMP II ... I got a BLACK screen and it goes nowhere, I had to switch back to AUTO 😞... are there any other settings that I'm supposed to change after enabling the XMP profiles?
Hey, i know this is a pretty old video, but is there a way to get to the pc diagnostics page from this motherboard? I cant seem to find it anywhere and I want to check on my pcs hardware.
Thanks for the follow up. Helps me understand where you are coming from. If you hardware is showing up in the bios screen then when boot into an OS you can then stress test it.
You can't turn off Nvidia Optimus from the bios. Integrated GPU you can if your CPU has it. The G series processors are the only ones that have it if you don't have one of those it is already disabled.
I have the newest Bios and I have switched out the GPU. I turned off fast boot and I still get no video display unless I hold the power button down and restart it. I have changed the Display cord too. Is there another BIOS setting for the GPU that I am missing
I doubt it. Have you tried putting back in the other GPU to verify that still works as before? If it works like it should, it opens up a lot of options but I would check power make sure that all is right, if you have another power supply try that. Is there any error codes lights on when there is no display? Lets start there.
@@GrayaOverload Thanks for replying, The Old GPU and the new GPU are doing the exact same thing:( No error codes, I will try another Power supply next. So weird that everything works perfectly after 2nd startup....
@@GrayaOverload Yeah and it is a real pain in the arse changing out the power supply, since I have everything all nice and neatly tucked away. Not sure if I am going to do it anytime soon.
I have a 5950x and I just cannot run it above 3200 for some reason anyone have any suggestions maybe? I have a Viper Elite 4000 cl20 kit and a Trident Z RGB 3600 C18 kit both don`t want to run above 3200mhz no boot
@@GrayaOverload yes latest bios I got it to run stable now at 3266 but I'm really looking for 3600 ideally. Maybe I'm missing something I got docp off set it to auto then I manually set the ram to 3266 and the fclk at 1633 pbo enabled dram set to 1.4v ¦¦ Then if I use docp at 3600 with pbo off and set dram voltage to 1.4 it doesn't boot it tries 3 times I tried allot of different settings is it good to have pbo on always?
Pbo on should be fine. On my friend that has this board it is as easy as you see in the video. maybe if you start adjusting timings you might get more out of it. I am wondering if the 5950x has a limitation on what it can do for memory speed.
@@GrayaOverload yeah maybe it's the memory controller of the cpu that is at its max I was hoping to get a little more out of the ram as it gives a huge increase in fps in the game Rust maybe I should just double down and go ddr5 and go back to Intel the new Ai overclock thingy works amazing on my friend's pc
Depends on the money you want to spend. I wish I could upgrade :). Do you have a friend with a AM4 cpu that you could try? My kids have a i5-12600k with ddr5 and it is working well now on a 600 board. I also built a 7600x for someone and that did well with ddr5. I need to try out the AI overclock stuff from Intel.
@@GrayaOverload i know I’ve already done that part. But when I plug the flash drive with the windows 11download on it into my computer, where do I go in the bios to download and boot it with windows
![CAMPปลิ้น | EP.76[1/2] โจโฉเปิดป่าโหดรับโอ๊ต-ป๊อบ รอบนี้พี่เอาจริง!](http://i.ytimg.com/vi/pNg5O7Pf-a0/mqdefault.jpg)
Got one of the II version on the way, finally, arrives Monday! Have been waiting ages for this thing. Thanks for doing the walkthrough. Looking forward to playing with DOCS. It seems overall the C7H vs SGII bios changes are minimal, only removing some of the super niche features that are used by very few people.
Coming from a C7H which will not run 1833+ Fclock without issues. Benches fine out to 2000, but it's not stable in all programs. Really hoping the x470 to x570(s) upgrade, newer bios revisions, and DOCS paired with chilled water lets me finally get this 5950x to run at its' full potential.
I drove 6 hours to the micro center in Dallas, and they had one left. I took the chance and bought it right along with rtx 3090. well worth it.😅
I've seen on some videos that seem to indicate that there is a setting in the bios which allows the cpu to raise in frequency as needed up to its max boost clock so long as temperature constraints are being met. I'm feeling a little lost inside my x570-e bios- first time working with such a modern uefi mobo. Could you point me in the right direction?
Yes, PBO (Precision boost overdrive) @4:58 is a good place to start
@@GrayaOverload Thank you!
Thank you for the tutorial! Got a question tho if you don’t mind. I have the exact same CPU as in your build and I’ve noticed that your CPU temperature in BIOS is 38-39 degrees, while mine is 48-49 degrees. My cooler is noctua-d15s, so technically it should keep the cpu cool. Yet there is a 10 degree difference between our builds, what do you think might be the reason for that? Maybe I have applied to much thermal paste or screwed the cooler to tightly?
I’ve also noticed that my cpu fan speed is 860 RPM, while yours is 1920 RPM, so I guess that it has the impact as well. If that is the reason, is it possible to increase the cpu fan speed in the bios? Is it necessary to do so?
@@assasssin5328 The fan speed could be the reason. I tested this in a 22*C basement. it was on a 360 rad cooler which will take a lot longer to heat up. What is your temps when you stress test or playing a game or doing a heavy workload? I am more concerned about that then the idle temp. At idle I look for a balance between quite and cool.
@@GrayaOverload Hi, thanks for replying. I stress tested my CPU with Cinebench and AMD ryzen master and got 60-63 degrees at default. However, CPU power, TDC and EDC were at max (they were red). TDC and EDC were at 100% at their max and their indicators turned red. CPU power was just red. PPT was yellow at around 89%. I'm not sure if it is ok or not that they are red and yellow cause I have seen JayzTwoCents tutorial on how to test your PC and most of his indicators were green. He also used Precision Boost Overdrive, I tried to do the same thing but it only increased the cpu temps to 85 degress (I guess it is normal for PBO) and PPT tuned green as well, other indicators stayed at red (except TDC that turned yellow at 84%). So I decided to turn everything back to default. Just in case if it is crucial, I didn't do any overclocking on my CPU.
@@assasssin5328 For thoes being red i would only worry if the mobo can't handle it. If VRM termps going up then I would be concerned. I have a question about what case you have?
Another question is do you have the latest chipset driver?
@@GrayaOverload I have Corsair 4000d airflow. And yes, I have got the latest chipset driver for my mobo (asus rog strix x570-e gaming wifi 2)
Hi, I noticed your +5V voltage is a solid 5.020. My pc crashes and restarts when I try to play a game, I checked my bios and noticed my +5V was occasionally 4.538 and constantly dipping below it, flashing red. Could that be the reason for the sudden crash and restart? I'm using Corsair RM850 PSU. Thank you
That could be but could also be a lot of other things. Do you have another PSU to test it out?
Is there anything in this boards BIOS that would enable or Disable any given PCIe port?
I just got one of these and my Graphics Card only seems to want to work on Slot 2 but not Slot 1.
Not that i can recall. When I built the computer for my friend it was in slot 1. you can always reset bios back to default and see if that fixes it. Or try a different bios version.
I have the same mother board on a new setup but when run windows I don't see any option for Wi-Fi / doesn't work. I also did the install without key number do you think that would affect that? please help and thank you
That shouldn't matter. Does it show up in device manager?
For others in the future. The Wi-Fi drivers are in armoury crate. Hookup to a LAN, download, and install. Windows won't have those.
The motherboard RGB no longer lights up, Armoury Crate/ Aura Sync/ iCue doesn't detect my motherboard, and the LED EC1 Version is blank in my Bios settings. Does anyone know why my LED EC1 line is blank because that's what I think is causing the problems? (I've also removed the motherboard and made sure the Led1_Con cable was securely connected, but still nothing)
Interesting issue. Have you tried flashing the bios?
@@GrayaOverload I actually flashed the bios on Saturday and still the same thing. I didn’t update to the latest one though because that was is still a beta. My current bios is 4204.
Hey, Would the Corsair CMW16GX4M2C3200C16 Vengeance RGB PRO 16 GB (2 x 8 GB) DDR4 3200 MHz C16 XMP 2.0 be fully compatible with this motherboard? Thanks in advance if you reply to my question.
That should be. ASUS does have a memory compatibility on this board under support. rog.asus.com/motherboards/rog-strix/rog-strix-x570-e-gaming-wifi-ii-model/helpdesk_qvl_memory
@@GrayaOverload thanks man )
@@-Samurize No problem.
Thanks!
No problem!
I have the INTEL version, should the XMP profile setting be enabled and why? I have 4 sticks of rams in my z590-e ... thanks!
It will be if your memory has xmp profiles. What ram do you have?
@@GrayaOverload I have the G.SKILL TridentZ RGB Series 64GB (4 x 32GB) 288-Pin PC RAM DDR4 3200 (PC4 25600) Desktop ... should I ENABLE the XMP?
@@Mars-lf1pz I would enable XMP. After enabling it check to make sure your comptuer is stable. Sometimes you can have issues rare but I would keep and eye on for a while.
@@GrayaOverload I tried enabling XMP I & XMP II ... I got a BLACK screen and it goes nowhere, I had to switch back to AUTO 😞... are there any other settings that I'm supposed to change after enabling the XMP profiles?
@@Mars-lf1pz No, I just change the XMP profile. Are you on the latest BIOS?
Hey, i know this is a pretty old video, but is there a way to get to the pc diagnostics page from this motherboard? I cant seem to find it anywhere and I want to check on my pcs hardware.
I don't think so. My friend doesn't have this board anymore. Why would you want to use a diagnostic page and not just a stress test?
@@GrayaOverload im not too good with pc's thanks for the suggestion :D
Thanks for the follow up. Helps me understand where you are coming from. If you hardware is showing up in the bios screen then when boot into an OS you can then stress test it.
So I just got this new motherboard and it’s working great, however I can’t seem to get the wifi to work on it. Any help?
After booting into windows. Check device manager, you may need to install drivers for the wireless.
How to turn off Nvidia Optimus or disabling integrated Gpu? Using this bios
You can't turn off Nvidia Optimus from the bios. Integrated GPU you can if your CPU has it. The G series processors are the only ones that have it if you don't have one of those it is already disabled.
Pleaseee can you make a tutorial on this motherboard for the cpu page and like that
I just bought the motherboard and it’ll arrive next week
We will see what I can do. It is in a friends computer.
@@GrayaOverload if his gonna make any overclocking or something then please make a video on it
And btw i bought the same cpu as his :D
I have the newest Bios and I have switched out the GPU. I turned off fast boot and I still get no video display unless I hold the power button down and restart it. I have changed the Display cord too. Is there another BIOS setting for the GPU that I am missing
I doubt it. Have you tried putting back in the other GPU to verify that still works as before? If it works like it should, it opens up a lot of options but I would check power make sure that all is right, if you have another power supply try that. Is there any error codes lights on when there is no display? Lets start there.
@@GrayaOverload Thanks for replying, The Old GPU and the new GPU are doing the exact same thing:( No error codes, I will try another Power supply next. So weird that everything works perfectly after 2nd startup....
@@anthonyquinn7246 Let me know how that goes. Problems like this can really take time.
@@GrayaOverload Yeah and it is a real pain in the arse changing out the power supply, since I have everything all nice and neatly tucked away. Not sure if I am going to do it anytime soon.
Can you please explain how I can disable secure boot
Boot > Secure Boot Then clear the key. @12:22
Hi, I am planning to get this Board. Can you please tell me if I need BIOS Update for AMD 5900x processor? Thanks in advance
This board comes with the bios to support the 5900x
@@GrayaOverload the 5600x as well?
@@JWUspartan Yes, the 5600x as well.
Do I have to have an Ethernet cable to connect to the internet? If I only have a wireless internet isp ?
No, you can use wifi
@@GrayaOverload WiFi wasn’t popping up for me only Ethernet, I’m assuming the board doesn’t come with the WiFi driver installed…
@@shayne5665 check device manager and verify that the drivers are installed
@@GrayaOverload thankyou ! I ended up having to download the driver on to a usb from another pc
@@shayne5665 if you have this issue again. The WI-FI drivers are in armoury crate.
How are the VRM temps with this board? I'm a little worried - I've heard that at idle they run pretty hot.
They seem fine. My friend doesn't seem to have an issue. He does have good airflow in the case.
can you please PLEASE tell me how i can setup my wifi cause i cant find it in the bios or desktop :(
Is there an item in device manager that is not installed or looks like wireless?
Drivers are in armoury crate.
I have a 5950x and I just cannot run it above 3200 for some reason anyone have any suggestions maybe? I have a Viper Elite 4000 cl20 kit and a Trident Z RGB 3600 C18 kit both don`t want to run above 3200mhz no boot
Latest BIOS?
@@GrayaOverload yes latest bios I got it to run stable now at 3266 but I'm really looking for 3600 ideally. Maybe I'm missing something I got docp off set it to auto then I manually set the ram to 3266 and the fclk at 1633 pbo enabled dram set to 1.4v ¦¦ Then if I use docp at 3600 with pbo off and set dram voltage to 1.4 it doesn't boot it tries 3 times I tried allot of different settings is it good to have pbo on always?
Pbo on should be fine. On my friend that has this board it is as easy as you see in the video. maybe if you start adjusting timings you might get more out of it. I am wondering if the 5950x has a limitation on what it can do for memory speed.
@@GrayaOverload yeah maybe it's the memory controller of the cpu that is at its max I was hoping to get a little more out of the ram as it gives a huge increase in fps in the game Rust maybe I should just double down and go ddr5 and go back to Intel the new Ai overclock thingy works amazing on my friend's pc
Depends on the money you want to spend. I wish I could upgrade :). Do you have a friend with a AM4 cpu that you could try? My kids have a i5-12600k with ddr5 and it is working well now on a 600 board. I also built a 7600x for someone and that did well with ddr5. I need to try out the AI overclock stuff from Intel.
gamerboy80?
My pc can't turn on after :(
I need a bit more to go on. do you get any lights or fan spin when you press the power button?
You should have made the video with a board you could manipulate... I was eager to hear all the details but you couldn't touch them.
You absolutely showed me nothing i didn`t see or can`t see or didn`t already know... thanks for wasting my time
How do I download windows 11 when I first start it. Like where in the bios do I go
You download windows 11 thru windows or from Microsoft directly.
@@GrayaOverload i know I’ve already done that part. But when I plug the flash drive with the windows 11download on it into my computer, where do I go in the bios to download and boot it with windows
@@spencermowrer7154 F8 will bring up the boot menu and you can select the boot device.