FIX Your Glidecam Issues HERE - WATCH NOW!!! | Momentum Productions
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- This is my FAVORITE STABILIZER: geni.us/fG6g
Stabilizer Used In Video: geni.us/LhABy
Recommended Manual Stabilizer: geni.us/ikIAoP
Quick Release System: geni.us/oSBBfb
===========================
CHEAP Camera Gear You NEED!:
===========================
► Ball Head: amzn.to/2MTyYes
► Camera Monitor: amzn.to/2UpMXJY
► Sony NPF-Style Battery (USED A LOT!): amzn.to/2MTz1qE
► Dual Ballhead: amzn.to/2ZGx5If
► RGB On-Camera Light: amzn.to/2ZyVoYH
► LUT Pack: bit.ly/2xcc5Jy
► High-Power LED Light: amzn.to/2MTCKVb
► Motorized Slider: amzn.to/2NMNfta
► Gimbal: amzn.to/2NKCwzv
► Headphones: amzn.to/2Lkaxos
► Backpack: amzn.to/2zQWYq0
► Action Camera: amzn.to/2NNVLbx
► Carbon Fiber Tripod: amzn.to/2NKLGvI
► Cheap 50mm Lens (MUST-HAVE!): amzn.to/2LgyYTZ
In today's video, I answer all of your questions regarding the process of manually balancing a Glidecam, steadicam, or any other sort of manual stabilizer. If you follow this video to a T, then you will NOT have any issues with your stabilizer!
Please like and subscribe! Check out my website at CaptureTheMomen....
Also check out my Blog here: CaptureTheMomen...
I will be sharing A LOT of helpful information on that page, so please check it out and subscribe to my weekly newsletter!
Social:
My Facebook-
/ capturethemomentum
My Instagram- / momentum_productions
Twitter- / ctmomentum
**** MY MOST-USED CAMERA GEAR *****
(These links will direct you to Amazon)
►Main Camera- geni.us/EB2bjc
►Second Camera- geni.us/ydwJRz6
►BEST Lens for Gimbals- geni.us/I6mq2e
►General Lens- geni.us/7XEIoa
►Telephoto Lens- geni.us/Cex6Ld
►Drone- geni.us/0c1fRDJ
►NEW Favorite Gimbal- geni.us/47LjPN
►BEST Slider- geni.us/P5HLA
►Travel Slider- geni.us/y3BXAa
►Travel Tripod- geni.us/z8H83nw
►Pro Tripod- geni.us/qcf4Cn
►Bendy Tripod- geni.us/TIKAi
►Favorite Lav Mic- geni.us/P4caBr
►Audio Recorder- geni.us/iV9Qm
►Shotgun Mic- geni.us/3ljnRe
►Favorite LED Light- geni.us/HrcAt
►Travel LED- geni.us/EK4bME
►Flexible LED- geni.us/S21kLc1
►RGB Light- geni.us/eDLg
►Camera Bag- geni.us/Sn6n
►BEST Hardshell Case- geni.us/MwGYbi
►HD Transmitter- geni.us/0YBW
Disclosure - Some of the links you see in the description box are affiliate links. At no extra cost to you, if you use those links to purchase an item, I will receive a small commision. Thank you for your support :) #filmmaking #entrepreneur #sonyalpha
The reason I’m going for the glidecam is the more natural analog feel of the movement in the footage and so I don’t have to go to the gym. Cause damn pretty physical enduring to do it properly 😂❤️🔥
wow this is alot of work , this is why you need to pay the rates you should for video production . people have no idea how much work it is
Great video - very helpful. Thank you. Just one small thing that might help someone once perfect balance is achieved. If you have a glidecam that doesn't have screw adjustments like mine (and the one you demo) I find that sticking a small piece of 'Blu-Tak' or 'plastecine' to the lighter side does the trick. This is also a quick way of trimming the balance if it alters slightly when on a shoot.
Your videos on balancing glidecams have been the best ones I've found. One comment -- choosing between glidecam and gimbal is more than just budget considerations. They produce different looks, with the glidecams being more "organic" with some of the natural swaying side to side that we see when we're running or riding a bike when making a turn. Gimbals are definitely more stable, and produce a more polished look. Batteries on most gimbals are better than they used to be, although this may be a reason to go with a glidecam -- no batteries to recharge. Gimbals seem to be lighter overall and easier to handle, as well as easier to learn. Several things to think about when choosing between them.
Thank you for your input Alan! Time for me to make a comparison video! :)
i just cant seem to manage the rotation that happens in my stabilizer....i balanced it statically and when i move it forward nd backward it is pretty balanced but if i move it right left or try to move it in circles....it just rotates and the balance is broken....someone help......this is too stressful and dammit my hands are gonna fall...
😭😭😭😭you literally said what I was about to comment with.. the same problem and my hands are shaking because of 2 days of failure and tries
I just have to say. I have seen you on trending videos on Instagram but didn't know who you were. Once I found your channel I looked at your uploads and I started to add your videos to a playlist and then realized I was adding all of your videos! I am glad I found your channel! (I'll let you know when I have watched all of your videos XD) thanks for sharing you deserve more subs!
Thank YOU so much Andrew! I am glad you find my channel as well :)
Congratulations Josh. I still have steadycam and crane 2. I love both of them. Do not forget that a steadycam will never leave you. Always take him to the events, back up to the crane. 2. Once again, congratulations.
Thank you so much Marius! :)
AAAAND we're back
Yes, yes we are!!!!
I want to master my Redking, its a love and hate relationship with it. Issue for me is my back takes a toll after a session. Balance wise i've sort of nailed it. I just need to get smooth shots.
The massive learning curve is real!
Thank Josh, your movies helps my a lot when I bought my flycam, it's great that your coming back to earlies solutions. Lately a had the oportunity to use a flycam with a strong wind, it was difficult. Now I would like to buy Gimbal Zhiyun Crane 2. Thanks for all the advice from you.
Thank you Mac! :)
15:40 this is very dessapointing.. I searched for a glidecam for 2 months and I finally found one, and it have the same issue you talked about, trust me, it's hard to live in Syira ..
I've never used a glidecam but have always been intrigued, awesome video brother!
Thank you brotha!
Why does my steadycam spin around? Like the camera just goes around and around and I dont mean like pendulum swaying, like it spins around pointing towards me then back to the front
Good video, helps to understand glidecam and make our own DIY rig!
The cage you have seems to lift the mount base a bit. My biggest issue with manfrotto plates and glidecam are the locking lever hits either the camera or the base without locking properly. But your knob has freedom to turn. What's that cage used? Can you switch battery without taking cam out of it? Is there a different option?
Good teacher.
Thank you for the good introduction :-)
so, i noticed that during your dynamic tests, it is leaning on the right a little. So, can we try to micro adjust the camera position to the left ?
I have a glidecam type knockoff from china and when i place it on the C stand with the handle on the right side of the stabilizer and balance it it looks perfectly balanced but when i place it on the C stand again with the handle on the left side of the stabilizer it's off balance again and it's so frustrating 🥴Is it possible that the bearing is defected or something? I tried shooting test footage and it pans left and right just enough that the motion blur on 24fps 1/48 shutter makes it look unusable...
another benefit is.....no firmware no electronic defect....
thanks for the video
What do I do when my glidecam is not leaning forwards/backwards or side to side, but it's leaning diagonally?
I think it’s like he said something on you’re glide cam is maybe loose and it’s destabilizing the glide cam... did you try to look at all you’re connections ?:)
@@pierre-louis9217 I'm actually getting it fixed. Shipped it off to Glidecam
@@camgalloway691 okay nice, personally this tips changed my dynamic balance and helped me a lot !
Great video indeed! But I have followed the same steps and watched all the tutorial of yours! But even after having a decent drop test between 2.5-3sec my stabilizer keep swinging and rotate 180* little bit whenever I try to move! I own a flycam nano!.. please let me know how to fix it.
I am having the same problem, do tag me if you find a solution.
Love this!!!!! Thank u!!!!!
You are so welcome!
Hi Josh, I have the CameTV vest and Laing glidecam and really like them. I have been looking at the tru-horizon stabilizer add-on for stabilizers. Have you ever heard of it and what would be your thoughts. Not much on TH-cam about it.
Hey man! It's a nice concept, but NOT for that price. I'd rather get a Crane 2. Pluse, the Tru-Horizon ruins the whole look and point of manual stabilizers.
Momentum Productions I definitely agree. The price is an issue though I noticed B&H has dropped the price to $299.
Thank u so much Josh ,ur videos are awesome bro. ,best regards from Iraq
Thank you so much Perro! You the man!
Great video...Though Iam switched to the crane2.
Thank you so much! I LOVE my Crane 2. Do you?
Simply awesome.
My glide cam literally just spins and rotates when I run
@Mr. Aizat i just stopped trying after months i couldnt really find a solution i suggest u invest in an electric one cuz it balances really fast and its better tbh
Thanks to you I found out I need no extra weight at the bottom and my time went perfect.
Awesome man! Glad to hear it :)
For any given camera, he amount of weight you need depends on the length of the shaft. A shorter shaft will require more weight but is easier to maneuver. If weight is critical, lengthen the shaft and reduce the weight.
Most important thing everyone seems to miss: The slower the drop test is (>2seconds), the more will the stabilizer sway! A shorter drop test (~1seconds) will be a lot easier to use!!!
Glidecam drop-time should be 2-3 seconds...
@@MomentumProductions1992 I watched your video, I know what time you recommend...nonetheless, I've had better results with a drop time of 1-2 seconds.
Not that my results have been great but still :/
According to a glidecam, they said a 1.5-2 seconds is the best drop time.
@@MomentumProductions1992 but in this video it takes 1.2-1.3 seconds to drop
Great stuff.
Thank you so much! :)
why does my glide cam not drop on the drop test??! its stays balanced!
Put on more weight
You are vey close to perfect, the first step is to adjust the unit so that the shaft remains horizontal like yours is. Then just move the gimble 1.5-2 cm towards the camera or if the gimbal does not move lengthen the shaft by 1.5-2 cm. You should be in near perfect drop time.
I am using the crane 2 and after watching this video ...... it is much much easier to balance the crane 2
So glad to hear that Fung! Thank you for watching :)
Please make a comparsion
YESSSSIR!
Hi
Hey!
Bro
who tf has time for this. i should have bought the ronin lmao