Pouring and Finishing a Concrete Slab

แชร์
ฝัง
  • เผยแพร่เมื่อ 14 พ.ย. 2024

ความคิดเห็น • 47

  • @bengunns
    @bengunns 9 ปีที่แล้ว +6

    great video, especially i liked the brief explanation for each tool and what its for, certainly one of the best demonstrations on here, thanks for that, will now go and try it on own driveway, here in the UK. thanks for that

    • @1pcfred
      @1pcfred 9 ปีที่แล้ว +2

      +BenGunns Finishing looks a lot easier than it is.

  • @jaker5555
    @jaker5555 9 ปีที่แล้ว +2

    LOL! "...concrete waits for no man". Good one. Made my day. Good video and thanks for posting.

  • @mrbutler190
    @mrbutler190 9 ปีที่แล้ว +1

    Im learning and i sure did learn something from you're video great job!!

  • @BradleyBrandFurnitur
    @BradleyBrandFurnitur 9 ปีที่แล้ว +2

    Awesome video Russ... just poured an 8' x 10' slab - mixed it from cement/sand/gravel... me and one other guy... man it sucked. Didn't look nearly as good yours. I should have bought that bull float. Just glad it's over with!

  • @juanmuniz6334
    @juanmuniz6334 8 ปีที่แล้ว +15

    Looks okey. But by putting a 2x4 on the slab when putting the grover helps keeping it straight.

  • @spencerspot
    @spencerspot 14 ปีที่แล้ว +4

    A lotta hating in the comments. You guys did a good job teaching about concrete laying.

  • @cd1168
    @cd1168 8 ปีที่แล้ว

    excellent work.. very good diy project

  • @shylikoren2397
    @shylikoren2397 9 ปีที่แล้ว +1

    very good job great slab

    • @rbr266h
      @rbr266h  9 ปีที่แล้ว

      +Shyli Koren Glad u liked it

  • @MrBmxbrawler
    @MrBmxbrawler 8 ปีที่แล้ว +3

    concrete doesnt wait. especially when its comin off the truck already set. h20 brother

  • @Supergaboy
    @Supergaboy 14 ปีที่แล้ว +1

    Great rubber boots you're wearing! Nice concrete slab as well !

  • @vnpro9537
    @vnpro9537 7 ปีที่แล้ว

    Great video.

  • @RICHMONDHILL1981
    @RICHMONDHILL1981 14 ปีที่แล้ว +3

    for a down hill driveway would you want to have the finish a little rough? i was thinking about grip, esp. in winter.

  • @Jy-168
    @Jy-168 9 ปีที่แล้ว

    Good tips and demonstration sir

  • @user-ph7lp2dl1q
    @user-ph7lp2dl1q 8 ปีที่แล้ว +1

    there's so much work involved in getting concrete right.

  • @saleens3514me
    @saleens3514me 11 ปีที่แล้ว +4

    How long do you let it set up for before you broom it

  • @MIDLEMANDJ
    @MIDLEMANDJ 10 ปีที่แล้ว

    nice demonstration thanks

  • @forgar7985
    @forgar7985 9 ปีที่แล้ว

    Great job...

  • @TOTLE929
    @TOTLE929 8 ปีที่แล้ว

    look good! so what did u do with the wood frames u used for the sides?

  • @socalboergoats1931
    @socalboergoats1931 7 ปีที่แล้ว

    Good vid bud.

  • @rbr266h
    @rbr266h  14 ปีที่แล้ว

    @RICHMONDHILL1981 - you can adjust the broom finish as you prefer. I tried to match it to the existing driveway. but if you want more slip resistance a heavier hand with the broom will give you that.

  • @kevinvines1846
    @kevinvines1846 9 ปีที่แล้ว +1

    I went to the hater Paulo's channel, but only found some music videos...no concrete work. Your slab work looked pretty good to me!

  • @6300994558419886
    @6300994558419886 11 ปีที่แล้ว

    Awesome. Thanks for the tip

  • @velazquezmarie3478
    @velazquezmarie3478 8 ปีที่แล้ว

    excellent job man

  • @enochfuryan9094
    @enochfuryan9094 7 ปีที่แล้ว +1

    Thanks for sharing.

  • @DoingItCheap
    @DoingItCheap 8 ปีที่แล้ว +9

    I had to laugh at the end....concrete waits for no man...............the rest of that saying is...............and there is no such thing as too much help !

  • @davep75
    @davep75 14 ปีที่แล้ว +1

    Hey man you did all the work and your buddies were standing around bullshittin'. Oh yeah simi valley sucks too I know I live there.

  • @fiberzip
    @fiberzip 9 ปีที่แล้ว +1

    My scenario, sidewalk curb is actually higher than slightly sunken/cracked slob/sidewalk and I like to make it even again. Can I lay rapid set cement over then paint it with two coats of portland cement and then spray it with concrete sealer. Should I use rapid set cement alone or add some sand to prevent cracking.

    • @rbr266h
      @rbr266h  9 ปีที่แล้ว +2

      _ Remi _
      you could use a concrete resurfacer - Quickcrete makes a line of products. Just make sure you use a bonding agent on your
      old concrete.

    • @sleeppacomcastnet
      @sleeppacomcastnet 9 ปีที่แล้ว

      what did this job cost?

  • @Miguevel
    @Miguevel 8 ปีที่แล้ว

    Perfect Job.

  • @sugashane1115
    @sugashane1115 7 ปีที่แล้ว +2

    couldnt you have have just added expansion joints after concrete cured with a cutter

  • @phatcat1210
    @phatcat1210 9 ปีที่แล้ว +5

    You could save the world from destruction and some one would still slag you off ! Slab looks fine to me .....

    • @1pcfred
      @1pcfred 9 ปีที่แล้ว

      +phatcat1210 It looks good to me too.

  • @RICHMONDHILL1981
    @RICHMONDHILL1981 14 ปีที่แล้ว

    was that thunder i heard at the end of the video?

  • @cbro777
    @cbro777 9 ปีที่แล้ว +2

    Everybody got that? Okay get to work!

  • @fitzgerdbd
    @fitzgerdbd 11 ปีที่แล้ว

    very nice work! a little more commentary would have been very insightful though

  • @jayizquierdo9534
    @jayizquierdo9534 8 ปีที่แล้ว +2

    use knee pads, especially if you have bad backs lol

  • @santanaart1265
    @santanaart1265 8 ปีที่แล้ว

    nice

  • @fortnitelegend2917
    @fortnitelegend2917 8 ปีที่แล้ว

    Do more

  • @jairozepeda2972
    @jairozepeda2972 7 ปีที่แล้ว +4

    Who said white people are lazy?

  • @jairozepeda2972
    @jairozepeda2972 7 ปีที่แล้ว +1

    Who said white people are lazy?