I've seen a lot of videos on creating concrete slabs, but I've never seen one with this much detail and explanation. THE BEST VIDEO I'VE SEEN. Thanks a lot.
Requires, key word. But nothing saying don't do it anytime, even if it's thinner. It's always better with it as that's part of the way concrete works. Especially for a minimal cost
I needed help because I’ve never done concrete before. I’m a grandma who loves a project! My garage floor is 3/4 blacktop which is great because the original concrete floor is awful- porous, holes, never ending cement dust. I just wish the previous owners had done the whole floor!?! Now I’m trying to resurface the remaining 1/4 with a 2in layer of new concrete. I’m doing a 5x4’ pad 1st because I’m doing it alone and can’t mix more than 30lbs. at a time so I can lift the 5 gallon pail to pour it in the form. I was worried when I finished smoothing it out level because it was so wet on top. I grabbed my phone so I could find a video to show me what to do. Yours was the first to pop up and am I glad. You explained the process perfectly and now I know that I have to wait and finish it off when it dries more. Thank you so much. Too many of the videos are for people that know what they’re doing and they’re too complicated or expect me to know things that I don’t. I’m subscribing to your channel so I can get more instructions on home projects. 😊
Thanks Jesse. I’m a funeral director in Cyprus and now and again I do simple grave monuments and surrounds and I’m a total amateur. Videos like this truly help me a lot. Keep up the good work. Cheers 👍
Good job on the video but few tips for beginners. On a smaller slab like that, where it mainly has foot traffic you don't need the reinforcement. You really only need that if the slab is going to hold weight like a vehicle or a shed. If you are doing this solo using a wheel barrow is much easier than a mixing tub. You just dump it out instead of shoveling or trying to lift the tub. If you want to help hold the slab in place, drive some 4 inch long rebar half way into the ground. Spreading them out in the middle of the slab.
Thank you for the video. As for the stakes, I pulled the screws out of the side and drilled them most of the way into the top. Then I used my hammer to easily pull the stakes up by the screw.
Came here because I'm tired of the edges chipping and cracking on a bunch of dry pour pavers I did. Decided it's finally time to learn how to do it right.@@JessedoesDIY
A very Bob Ross style instuctional videos. I dont even need to do a concrete pad, or build a shed, but I enjoy the hell out of your videos. Well done good sir.
Good video, really informative step by step. ( being from Saskatchewan, I get the reference to the quickly changing weather !! )...thanx for video ...can't wait to see next one.
I'm glad you found my videos too, so thanks! I wouldn't want to see another person do a dry pour, there are so so many things wrong with it and I'm probably going to be making a video about it once I get my new place. I'm glad I could clear things up for you and good luck on yours!
My background is Italian, and this great video helped me. Thanks for reminding me about the steel mesh or rebar for extra strength, the sealer for longevity, and the cement surface's preservation. Nice educational video for your DIY projects,
I have this EXACT project in need of completion and these are the instructions I will follow to the letter. Thank you for creating such succinct instructions along with quality video. I did not fast-forward through any segments (because they were not boring or repetitive which is common in other DYI vids), and I had no difficulty understanding the tools, techniques, and overall process. Well done!
When rolling on the curing seal, use a threaded pole/handle. Most rollers are universally threaded and there’s probably a broom, mop, or other thing around to use.
Thanks for posting. Agree with others comments re: DUST-either mask or have assistant lightly spray during bag dump. MESH-raise up to middle of pour with Little Rock’s or…. I’ve got 2.5 acres, more & bigger projects but enjoy your video style, SUBSCRIBED and I’ll be going back for more.
Anytime, glad you found it useful! Yeah we should have worn dust masks, but it was a bit breezy that day and I should have at least said something. I would have raised it up slightly, but it's very easy to bump it without properly raising it and I was trying to make this as simple as necessary for the average homeowner, and this wouldn't impact a small slab for most people. Welcome to the crew, glad to have you!
Just what I needed. Thank you for making such an easy to follow video. I had been wondering about using a tub vs wheelbarrow and some other items mentioned here. Thanks for listing them. You've made my job so much easier! Subscribed.
That's awesome! I'm glad I could help out. I've had this tub for 4 years now and it works great, but lots of people use wheel barrows to dump it easier. I just shovel it out of tub normally. Good luck on your project and welcome to the crew!
My man. I just poured a 2x4’ pad for the condenser of my heat pump and this video helped me SOOOOOOO much. Thank you for your instruction. It was a great learning experience for me and the kids and I only spent $100 for everything.
This really helped, I have a concrete slab walkway that is absolutely wrecked from hard Canadian winters and the previous homeowners not really caring to perform house/yard maintenance. So I really found this quite handy!
Awesome, glad I could help! Well I live in Saskatchewan, so I know what you mean by hard winters lol it's amazing how little effort maintenance is and nobody does it. Yet how fast it deteriorates without it. Good luck on yours!
Thank you for this brother. Needed a side gig so had to lie on a application this will at least make it look like I got basic beginner knowledge and skills and will allow me to be with a company you that I can better my skills and learn hands on in just never like going in knowing nothing at all. Thank you. I know that sounds bad but I work hard but times are harder right now lol
Anytime, I'm happy to help any way I could. Trust me, I get it. I've had my ass handed to me the past 8 months. I hope it all turns around for you, keep at it
Dry pours are not good ideas, but everybody seems to be fascinated by them recently. Ultimately you're skipping vital steps, and concrete is a chemical reaction. Skipping them will have adverse effects. There is a reason the pros, as well as concrete manufacturers don't do it
Very nice and well-done video brother! I am getting ready to pour my first concrete slab ever this morning. I have a 2' x 8' area/section and thought I would need about 15 bags of concrete according to the sizing chart on the Quickrete bag, (16 sq ft). However, after watching your video, I realized it's easier to use some bags of paver base as you did, and only need about 6 or 7 bags to do the job! I learned a lot here and feel much more confident now going into this project! Kudos for taking the time to do this video. - Mark from Holly, Michigan.
bro take this as a compliment, I had to skip some concrete slab making videos until I found this video. You have a nice voice! Nice enough to hear and watch you explain the process. I didn't skip some parts unlike other vids 😭😭😭
This is hands down the best instructional video on making a concrete slab, and it has given me the confidence to undertake such a project. Thank you for making such an effective and empowering video! Brilliant!
Thank you for explaining every step of this process and adding tips. This was extremely helpful and gave me the confidence to make a pad for my stairs in my garden.
Bro, thanks for this vid. This is roughly the size of slab I’m going to need to do in my backyard. My job is between the foundation slab and the paver walkway, which are held in place by 2x4’s. You’ve got a new subscriber here bro. I’m not much of a handyman and this Vid was perfect for me as you went step-by-step. 🙌🏼
Nice step by step video. Dry times vary quite a bit depending on your area for anyone watching this and following these steps for guidance. 3 hours might be too long to wait for a finishing trowel.
Thanks! I would have liked that too but I was trying to use things the homeowner might grab at the hardware store. That's what they had so that's what I grabbed
I would have used the square to mark it and the spade to dig lol but that's me.There are actually tricks you can do like put a board across the middle to hold the middle from bowing out simply have higher stakes and screw the board up higher above the surface allowing you to work underneath. As to the pour i would be ok making the first several bags a bit wetter because they will keep the bottom from getting too dry too fast by the dry stones or simply spray some water on the stones. Something many forget or don't know is that concrete is never a perfect pour there wil be areas wetter softer than otehrs and those areas will likely SINK a bit.So there are two ways to fix that go over the pour minimum 3x i prefer 4 for perfection and or to pour with a bit of a crown instead of the perfectly flat screed method. Finally and perhaps very important is to not use an aluminum trowel but to just use a magnesium float .Trust me if you float it 4x your broom job will look amazing you just can't float it before it is ready it needs to dry a bit each time.I have many times still got an amazing finish flaoting 3x but so many people including contractors are not organized or impatient and will only float it 2x and unless your weather if perfect temperature perfect the mix is perfect you won't get the preferred finish.
What a great video!! I'll be doing some concrete work on my house a l little at a time because my back can only take so much 😂 and your video really helped me, A+ on your editing and Instructions and guidance while making the video. I was wondering why you weren't using the wheel barrel to mix the cement but then realized you saved the grass clippings and your dirt you scrapped up at the beginning, smart man 🫡 keep up the good work!!
Thanks so much, I'm glad you liked it! Pick away at projects a little at a time and before you know it, it'll be a new yard. That's what I've been doing. Good luck on yours!
Is cools dude I reckon the 30 years of heavy smoking (wink wink) will probably get them first... Oww.. Is beer o'clock 😂 No but good advice thanks... I just burnt a root out the floor... Fackin used slightly too much lighter fluids 😮 fml oops!! Is okay is parents house not mine lol 😊
I wear a mask when dumping but still hold my breath for a while 😄 And walk away for a few seconds until the dust disappears.. Even if I do it like this, it still feels like I am breathing in some dust.
thank you, I just finished mine after the wife nagged me 12 years ago. I wondered about the curing, now at least I can keep her at bay for another 10 years 😇😇😇
I really enjoyed this video, And I really appreciate your style/energy. I’m planning to do something very similar at my house in the coming weeks, and your tips just increased my confidence and overall knowledge of how to approach this, thank you for that!
Wow, I can’t thank you enough for this video! It’s a great video, straight to the point with no selling/promotional bits, exactly what I was looking for!
I agree. I poured several 4’x4’x4” d as labs for a patio area in my dog run several years ago. No cracks, no settling, and still perfectly leveled with about a 2 degree slope away from the house.
Thanks very much! There is always something I'd do differently too, but for the sake of simplicity for people this is what I came up with. Glad you liked it!
As a thought, a list of the tools you used would be helpful to the audience. I know you talked about them, but a written list would be helpful. Loved the video - so well done. Thanks so much.
This much wight and rocks will burn out a drill. A good hand mixer then yeah for sure. I've got it too and do that method when I'm pouring counters and table tops. Thanks tho, glad you liked it!
Great video. Never did any concrete work before but im feeling confident to tackle my first project...BTW I have what i thought was an old concrete mixer in my garage i was about to put on the curb til i seen this. Now i think im going to try to use it pretty soon. You might have saved me a few hundred 😅.
Fantastic job!im geting old and like older senior citizen don't have the money to pay for the labor ,im replacing my electric gate motor ,now i can make a small custom concret slab,im a retried tool@cutter grinder.😁
😊 awesome work I’ve watched other concrete videos yours has actually explained how each step is done and why it works for example the fingerprint in the concrete to check before brushing etc these big concrete names on you tube don’t do the little details like you just showed thanks great video.
Thanks, appreciate it! I try to explain as much as I can in my videos and answer questions that I think will come up, and give tips to simplify the why, so I'm glad you found it useful!
Nice job! You made this easy-peesy and everyone should be able to do it if the take their time and follow these simple instructions. Thanks for this sensible alternative to all the useless dry-pour vids that are encouraging folks to create poor hard surface things (can’t really call them concrete).
Thanks! I tried to make it as clear and easy to do as possible while doing it correctly. I've had so many people comment about dry pouring, and I tell every one of them how Terri le of an idea it is. There is a reason why roads aren't poured by a dump truck and then a water truck comes by...or why bags of concrete don't have dry pour instructions. I'm almost at the point of making a video disproving dry pouring
I love how that Husky is just living its best life & enjoying your company while you're hard at work!
Me too. I love it when he hangs out!
Don't forget to tap your form all around the edges with a hammer/ mallet to allow the bubbles to rise to the top. Great video sir.
Thanks
I've seen a lot of videos on creating concrete slabs, but I've never seen one with this much detail and explanation. THE BEST VIDEO I'VE SEEN. Thanks a lot.
Awesome! Well I'm glad that I could be of help! Good luck on yours!
Not thick enough for rebar...4" or more requires rebar..
Requires, key word. But nothing saying don't do it anytime, even if it's thinner. It's always better with it as that's part of the way concrete works. Especially for a minimal cost
This is what I needed to see to give me the confidence to pour my own pad for my grill!
Awesome, glad you found it useful! Good luck, I'd love to see it when you're done
I needed help because I’ve never done concrete before. I’m a grandma who loves a project! My garage floor is 3/4 blacktop which is great because the original concrete floor is awful- porous, holes, never ending cement dust. I just wish the previous owners had done the whole floor!?! Now I’m trying to resurface the remaining 1/4 with a 2in layer of new concrete. I’m doing a 5x4’ pad 1st because I’m doing it alone and can’t mix more than 30lbs. at a time so I can lift the 5 gallon pail to pour it in the form. I was worried when I finished smoothing it out level because it was so wet on top. I grabbed my phone so I could find a video to show me what to do. Yours was the first to pop up and am I glad. You explained the process perfectly and now I know that I have to wait and finish it off when it dries more. Thank you so much. Too many of the videos are for people that know what they’re doing and they’re too complicated or expect me to know things that I don’t. I’m subscribing to your channel so I can get more instructions on home projects. 😊
That's awesome! Well I'm glad I could gelp you learn and grow. Good luck on the rest of it, sounds like a big project. And welcome to the crew!
That Husky is in chill mode! Thanks for the video. Really helpful
Haha he always is! Glad you liked it
Thanks Jesse. I’m a funeral director in Cyprus and now and again I do simple grave monuments and surrounds and I’m a total amateur. Videos like this truly help me a lot. Keep up the good work. Cheers 👍
No problem, I'm glad I could help! That's nice, happy to know all of the ways people are using this! Appreciate it
You must be dead pleased with the results.
Yup
@@bizling yes, and none of the customers ever seem to complain 😀
@@theeuropeancyclepaths8206😂😂
Put a few small rocks mid depth to support the metal mesh before pouring. Get it in the middle of the concrete thickness.
Good job on the video but few tips for beginners. On a smaller slab like that, where it mainly has foot traffic you don't need the reinforcement. You really only need that if the slab is going to hold weight like a vehicle or a shed. If you are doing this solo using a wheel barrow is much easier than a mixing tub. You just dump it out instead of shoveling or trying to lift the tub. If you want to help hold the slab in place, drive some 4 inch long rebar half way into the ground. Spreading them out in the middle of the slab.
agree-
Do you need rebar or whatever for just a patio and chairs situation and for that, how deep do you need the slap. 2",3"4",,etc?
@@USMC-1ur gonna need all 9” 🤥😉😲😵💫😵🥴🤤
Thanks for the tip
Thank you for the video. As for the stakes, I pulled the screws out of the side and drilled them most of the way into the top. Then I used my hammer to easily pull the stakes up by the screw.
I thoroughly enjoyed sitting in my living room, watching the snow fall and dreaming of my next DIY project! Thanks!
No problem! Yeah I also can't wait to get back outside for more projects.
Nice pour. Good to see someone on youtube actually putting the work in and mixing their concrete lol.
Thanks! This whole dry pour thing is getting out of hand unfortunately
Came here because I'm tired of the edges chipping and cracking on a bunch of dry pour pavers I did. Decided it's finally time to learn how to do it right.@@JessedoesDIY
This video is fantastic. Straight forward, clear, concise.
Thanks! Glad you liked it
A very Bob Ross style instuctional videos. I dont even need to do a concrete pad, or build a shed, but I enjoy the hell out of your videos. Well done good sir.
Lol thanks Chris! I appreciate it
This is the typa comment that I look for in educational vids on projects imma start. Not even a second in and I’m hooked lol
That's awesome!
Good video, really informative step by step. ( being from Saskatchewan, I get the reference to the quickly changing weather !! )...thanx for video ...can't wait to see next one.
Thanks, appreciate it! Oh yeah, you get it lol.
Good job. A brother is always a plus to have around, I put mine to work every chance that I get
Thanks! Yup, definately helps
So glad I found your video. I was considering dry pour due to being intimidated by this process but you really helped my anxiety about it!
I'm glad you found my videos too, so thanks! I wouldn't want to see another person do a dry pour, there are so so many things wrong with it and I'm probably going to be making a video about it once I get my new place. I'm glad I could clear things up for you and good luck on yours!
My background is Italian, and this great video helped me. Thanks for reminding me about the steel mesh or rebar for extra strength, the sealer for longevity, and the cement surface's preservation. Nice educational video for your DIY projects,
Thanks! I'm glad I could help out. Good luck on yours
I have this EXACT project in need of completion and these are the instructions I will follow to the letter. Thank you for creating such succinct instructions along with quality video. I did not fast-forward through any segments (because they were not boring or repetitive which is common in other DYI vids), and I had no difficulty understanding the tools, techniques, and overall process. Well done!
Awesome! You're welcome, I'm just glad I could help. Thanks very much and good luck on your project!
When rolling on the curing seal, use a threaded pole/handle. Most rollers are universally threaded and there’s probably a broom, mop, or other thing around to use.
Excellent details in this short video. Keeping it to the point and still fun to watch.
Thanks very much, I'm glad you enjoyed it!
These are the kind of videos I like simple and plain
Thanks! Glad you liked it
great video. very easy to follow and you included the tools and materials . I appreciate it.
Thanks, I'm glad you found it useful!
This was a great tutorial. I'm about to make a slab for a 4x6 storage shed, and your video is very helpful. Thank you!
That's awesome! I'm glad I could help, good luck on yours!
Same
Great, good luck!
How many bags of cement did yours take?
Thanks for posting. Agree with others comments re: DUST-either mask or have assistant lightly spray during bag dump. MESH-raise up to middle of pour with Little Rock’s or…. I’ve got 2.5 acres, more & bigger projects but enjoy your video style, SUBSCRIBED and I’ll be going back for more.
Anytime, glad you found it useful! Yeah we should have worn dust masks, but it was a bit breezy that day and I should have at least said something. I would have raised it up slightly, but it's very easy to bump it without properly raising it and I was trying to make this as simple as necessary for the average homeowner, and this wouldn't impact a small slab for most people. Welcome to the crew, glad to have you!
Just what I needed. Thank you for making such an easy to follow video. I had been wondering about using a tub vs wheelbarrow and some other items mentioned here. Thanks for listing them. You've made my job so much easier! Subscribed.
That's awesome! I'm glad I could help out. I've had this tub for 4 years now and it works great, but lots of people use wheel barrows to dump it easier. I just shovel it out of tub normally. Good luck on your project and welcome to the crew!
My man. I just poured a 2x4’ pad for the condenser of my heat pump and this video helped me SOOOOOOO much. Thank you for your instruction. It was a great learning experience for me and the kids and I only spent $100 for everything.
Dude, that's awesome! I'm glad I could help and pumped you gave it a go, it's fun with the kids and great to learn!
Your general attitude towards work + life is really inspiring!
Thanks so much!
Thanks for the Calculator, the only one that would do my small 43" x 30" Pad !!!
Anytime! Glad to hear somebody used it lol
This really helped, I have a concrete slab walkway that is absolutely wrecked from hard Canadian winters and the previous homeowners not really caring to perform house/yard maintenance. So I really found this quite handy!
Awesome, glad I could help! Well I live in Saskatchewan, so I know what you mean by hard winters lol it's amazing how little effort maintenance is and nobody does it. Yet how fast it deteriorates without it. Good luck on yours!
Oh i feel that, starting to get cracks all along the house! Good ole Manitoba winters💁🏽♀️😂
Yuuuuup. The past few winters have been ridiculous
Love those big tubs for the smaller jobs. . Bought my first one probably 40 years ago and never mixed in a wheelbarrow again.
Yup, I prefer the tub. This way doesn't beat the crap out of my wheelbarrow
Good job, & thanks for not having annoying music.
Thanks. It crazy how many people comment about not having music lol
Thank you for this brother. Needed a side gig so had to lie on a application this will at least make it look like I got basic beginner knowledge and skills and will allow me to be with a company you that I can better my skills and learn hands on in just never like going in knowing nothing at all. Thank you. I know that sounds bad but I work hard but times are harder right now lol
Anytime, I'm happy to help any way I could. Trust me, I get it. I've had my ass handed to me the past 8 months. I hope it all turns around for you, keep at it
Excellent video as usual my friend. I've been wanting to do a pad like this next to the driveway for my garbage bins.
Thanks man, I appreciate it. That's literally what a small pad like this would be perfect for go for it!
Never heard of a bunnyhug! Thanks so much for your channel, I'm learning so much. You're so knowledgeable without the ego.
Haha it's a Saskatchewan term, I don't know why. That's awesome, well I'm glad I could help out!
you earned a sub with this one - I needed an instructional video on pouring a slab for a generator and this was perfect. Thanks!
That's awesome, thanks for joining! I'm glad I could help out, good luck on your slab!
thanks for this great video. i just laid a concrete step coming out my back door for the first time. your video taught me everything.
That's awesome. I'm glad to hear it!
Thank you for the video. I’ll be tackling this in a couple of weeks. It’s my first time doing this, but with your help, I’ll get it done!
Anytime, glad I could help! Absolutely you can, good luck on yours!
Doing a dry pour seems a ton easier to me
Dry pours are not good ideas, but everybody seems to be fascinated by them recently. Ultimately you're skipping vital steps, and concrete is a chemical reaction. Skipping them will have adverse effects. There is a reason the pros, as well as concrete manufacturers don't do it
Thank you for telling how long to wait between each step, very helpful
No prob! I figured that would be a question I'd get often if I didn't because it is valid
Dude, you did an awesome job. Made it feel stress free. I subscribed.
That's awesome! I'm glad I could help, and welcome to the crew!
This is the best DIY vid I’ve seen on TH-cam
Thanks! I think it's probably my best video so far
Nice clear instructions with no extra “blah blah blah”. Nice work on the slab. Like to see whatever comes in the future. Sub’d. 🇨🇦👍🏼
That's awesome, thanks! Glad you liked it
Very nice and well-done video brother!
I am getting ready to pour my first concrete slab ever this morning. I have a 2' x 8' area/section and thought I would need about 15 bags of concrete according to the sizing chart on the Quickrete bag, (16 sq ft).
However, after watching your video, I realized it's easier to use some bags of paver base as you did, and only need about 6 or 7 bags to do the job!
I learned a lot here and feel much more confident now going into this project! Kudos for taking the time to do this video.
- Mark from Holly, Michigan.
Thanks very much, I appreciate it! I hope that your slab went well!
Canadians get the squarest 2x4's! This is a great video, btw, thanks for this!
Pfft maybe if you dig for them lol They aren't always. I'm glad you liked it
bro take this as a compliment, I had to skip some concrete slab making videos until I found this video. You have a nice voice! Nice enough to hear and watch you explain the process. I didn't skip some parts unlike other vids 😭😭😭
I appreciate that! I will take the compliment, so thanks. I hope you found the video helpful too.
Thanks for a great video! Beginning to build a pad in the backyard and now I have everything I need.
Anytime, glad you liked it! Good luck on yours
This is hands down the best instructional video on making a concrete slab, and it has given me the confidence to undertake such a project. Thank you for making such an effective and empowering video! Brilliant!
Thank you very much! I'm glad you found it useful. Good luck on yours!
Thank you for explaining every step of this process and adding tips. This was extremely helpful and gave me the confidence to make a pad for my stairs in my garden.
Anytime, I'm glad you found it useful! Good luck on yours!
Bro, thanks for this vid. This is roughly the size of slab I’m going to need to do in my backyard. My job is between the foundation slab and the paver walkway, which are held in place by 2x4’s. You’ve got a new subscriber here bro. I’m not much of a handyman and this Vid was perfect for me as you went step-by-step. 🙌🏼
Dude, that's awesome! Welcome the crew, I'm so glad I could help you out. If you haven't done it yet, good luck on your slab!
Nice step by step video. Dry times vary quite a bit depending on your area for anyone watching this and following these steps for guidance. 3 hours might be too long to wait for a finishing trowel.
Thanks! Yeah it can vary greatly by temp, humidity and mix used
Great stuff mate! Enjoyed how you showed the little tips, on edging the concrete and brushing the finished slab. 😊
Thanks! I'm glad I could help
Great to see you used reinforced concrete. It helps keep the slab tight. It would be great to see a wider finishing broom used.
Thanks! I would have liked that too but I was trying to use things the homeowner might grab at the hardware store. That's what they had so that's what I grabbed
I would have used the square to mark it and the spade to dig lol but that's me.There are actually tricks you can do like put a board across the middle to hold the middle from bowing out simply have higher stakes and screw the board up higher above the surface allowing you to work underneath.
As to the pour i would be ok making the first several bags a bit wetter because they will keep the bottom from getting too dry too fast by the dry stones or simply spray some water on the stones.
Something many forget or don't know is that concrete is never a perfect pour there wil be areas wetter softer than otehrs and those areas will likely SINK a bit.So there are two ways to fix that go over the pour minimum 3x i prefer 4 for perfection and or to pour with a bit of a crown instead of the perfectly flat screed method.
Finally and perhaps very important is to not use an aluminum trowel but to just use a magnesium float .Trust me if you float it 4x your broom job will look amazing you just can't float it before it is ready it needs to dry a bit each time.I have many times still got an amazing finish flaoting 3x but so many people including contractors are not organized or impatient and will only float it 2x and unless your weather if perfect temperature perfect the mix is perfect you won't get the preferred finish.
This was the DIY concrete video, I've seen. Now I feel fully ready to complete my project. Thank you!
That's awesome! I'm glad I could help, good luck on yours!
What a great video!! I'll be doing some concrete work on my house a l little at a time because my back can only take so much 😂 and your video really helped me, A+ on your editing and Instructions and guidance while making the video. I was wondering why you weren't using the wheel barrel to mix the cement but then realized you saved the grass clippings and your dirt you scrapped up at the beginning, smart man 🫡 keep up the good work!!
Thanks so much, I'm glad you liked it! Pick away at projects a little at a time and before you know it, it'll be a new yard. That's what I've been doing. Good luck on yours!
Great video! I feel like I could go out and do this. Thank you for the tip on the sealer to avoid having to use the water for curing.
Thanks. For sure you can! No problem, glad I could help. Good luck on yours
Super important to wear a mask when dumping the concrete out of the bag. That dust will hardened inside your lungs....
Is cools dude I reckon the 30 years of heavy smoking (wink wink) will probably get them first... Oww.. Is beer o'clock 😂 No but good advice thanks... I just burnt a root out the floor... Fackin used slightly too much lighter fluids 😮 fml oops!! Is okay is parents house not mine lol 😊
Most concretors I know smoke gear and darts flat out, cement dust has nothing on them
These people commenting about smoke have no idea what Silica is and what it does to the lungs. Trust me it’s not the same as smoke 🤦🏻♂️
Yea good point! Thanks!
I wear a mask when dumping but still hold my breath for a while 😄
And walk away for a few seconds until the dust disappears..
Even if I do it like this, it still feels like I am breathing in some dust.
thank you, I just finished mine after the wife nagged me 12 years ago. I wondered about the curing, now at least I can keep her at bay for another 10 years 😇😇😇
Haha better late than never! Happy to help
I really enjoyed this video, And I really appreciate your style/energy. I’m planning to do something very similar at my house in the coming weeks, and your tips just increased my confidence and overall knowledge of how to approach this, thank you for that!
Thanks very much! I'm glad you liked it and learned from it. Good luck on your slab!
Wow, I can’t thank you enough for this video! It’s a great video, straight to the point with no selling/promotional bits, exactly what I was looking for!
Anytime! Glad you like it
Dude you're crushin it keep em coming
Thanks man! I appreciate it
Excellent video!!! Thank. you Jesse. I'm ready to begin my project now. Cheers from Massachusetts
Anytime, happy I could help, cheers!
Flat surfaces pours of 4" deep does not need reinforcement at all, nor gravel but if one has the extra money to expend it does not hurt either.
😂😂😂
Nice job, lifetime strong
I agree. I poured several 4’x4’x4” d as labs for a patio area in my dog run several years ago. No cracks, no settling, and still perfectly leveled with about a 2 degree slope away from the house.
True. I’d just use the 5000 psi maximizer and call it good.
If it’s really small like this yes. But personally would always recommend reinforcing. Concrete is not strong at all without rebar.
Hats off to your step by step ability dude lol. A couple things I'd have done differently but irregardless good job. 👍
Thanks very much! There is always something I'd do differently too, but for the sake of simplicity for people this is what I came up with. Glad you liked it!
I noticed you did not put any cut lines in your slab. Is there a min/max size of slab required for cut lines ?
That's about as big of a slab as I'd go without it. You can do bigger without them, but run the risk of cracking.
This was outstanding! Thank you so very much for such an easy, but detailed step-by-step
Anytime, glad you found it useful!
Great video, thanks for sharing
Anytime! Glad you liked it
Excellent tutorial, i will be doing my first pad tomorrow and this was very helpful
Thanks! That's awesome, I hope it went well
Thank you from BC, excellent video! This will be helpings me make mine, much appreciated!
Anytime! Glad you found it useful!
As a thought, a list of the tools you used would be helpful to the audience. I know you talked about them, but a written list would be helpful. Loved the video - so well done. Thanks so much.
There is links in the description of what I could find, but I know what you mean. Thanks, I'm glad you liked it!
You made it look so easy!! I feel more confident now!
Thanks, glad I could help. Good luck on yours!
I’ll soon be attempting this for a fire pit in my backyard. Thanks for the tips!!
Awesome! Good luck on yours
Great video. I plan to put in a shed next year and will be using this again to help me put in my pad.
Thanks! That's awesome. Good luck when the time comes
That's a fine looking concrete slab. Thanks. I enjoyed the video.
Thanks, appreciate it!
Iam 70 now poured concrete. Poured it for 50 years! Came out 😊 👍
Thanks!
Awww the doggie helped you and he’s the best part of the video
haha he is always around watching!
People this pleasant still exist?! Nice job, thanks!
I do! Lol thanks!
Thank you very much for taking the time to post this, sir! Subscribed
Anytime, happy to help! Welcome to the crew!
Great video!!! This is my weekend project!! Well done. Simple clear instructions! Thanks
Thanks, I'm glad you found it useful! Good luck on yours!
Thanks young fella! You covered all the bases!
Anytime!
Id grab about five buckets, A mixing drill bit and BAM! save that back my friend its the only one you have. Awesome video
This much wight and rocks will burn out a drill. A good hand mixer then yeah for sure. I've got it too and do that method when I'm pouring counters and table tops. Thanks tho, glad you liked it!
Thank you. Great and easy to understand thorough instructions.
Anytime, glad you found it useful
You make it look so simple, step by step😊 thank you
Anytime, glad I could help!
Love the amount of detail provided
Good to hear!
This was fun to watch. I'm going to try this in the Spring. Thank you!
Thanks, glad you liked it! Good luck on yours!
Just right. Enjoyed watching. Well done!
Thank you very much!
Love your supervisor!😁
Me too! 😃
Awesome video... you inspired me to make a small slab for my grills and motorcycle...
Thanks. That's awesome, good luck on yours!
Great design, and Craftsmanship!
Well done!
Thanks!
Your dog looks so excited:). Thanks,
Lol he loves being outside on a cool day
Very helpful thanks Jesse! My project came out pretty good this vid was a huge help! Cheers!
Fantastic! I'm glad to hear it, thanks for sharing. Cheers!
Great video. Never did any concrete work before but im feeling confident to tackle my first project...BTW I have what i thought was an old concrete mixer in my garage i was about to put on the curb til i seen this. Now i think im going to try to use it pretty soon. You might have saved me a few hundred 😅.
Excellent video. One of the best I've seen.👍
Thanks, appreciate it!
Good video. I would use broken concrete to get the mesh about the middle of the slab. Very nice work.
Thanks. Yeah there are a couple options but for simplicity sake for the average homeowner, this was easy. Glad you liked it
Fantastic job!im geting old and like older senior citizen don't have the money to pay for the labor ,im replacing my electric gate motor ,now i can make a small custom concret slab,im a retried tool@cutter grinder.😁
Thanks very much! Sounds like you have a great project, good luck on yours!
Nice job, a DIYer myself - love watching these simple videos, thanks.
Thanks! That's awesome, well I'm glad you liked it
Thanks for the vid ! Gonna start this week after. Year of procrastination
Anytime! Good luck on yours!
Thank you! Best video! Your dog is so cute too!
Thanks! Lol he's pretty great in my eyes
Job inspector 🐕 is just chillin 😎 hard up on that deck. Mine would've been all up in my business lol
Yeah lol I keep saying he needs a white hat because he does that quite often. Back in his younger days he would have been in my face
😊 awesome work I’ve watched other concrete videos yours has actually explained how each step is done and why it works for example the fingerprint in the concrete to check before brushing etc these big concrete names on you tube don’t do the little details like you just showed thanks great video.
Thanks, appreciate it! I try to explain as much as I can in my videos and answer questions that I think will come up, and give tips to simplify the why, so I'm glad you found it useful!
Nice job! You made this easy-peesy and everyone should be able to do it if the take their time and follow these simple instructions. Thanks for this sensible alternative to all the useless dry-pour vids that are encouraging folks to create poor hard surface things (can’t really call them concrete).
Thanks! I tried to make it as clear and easy to do as possible while doing it correctly. I've had so many people comment about dry pouring, and I tell every one of them how Terri le of an idea it is. There is a reason why roads aren't poured by a dump truck and then a water truck comes by...or why bags of concrete don't have dry pour instructions. I'm almost at the point of making a video disproving dry pouring