Your videos are absolutely high quality! Everything thing is well done: the information, the presentation, narration, the camera work, audio, and you get right to the point. Thank you for your time!
So to clarify, @@FishingwithNat, you would recommend a swivel over an anti-kink vane? I used to have serious issues with kinking line, so since returning to lure fishing at the start of the pandemic, I've always used anti-kink vanes rather than swivels. Mine are clear, hopefully low visibility, and are always mounted 12" - 18" up the line from my wire traces; for traces, I use the smallest, lightest ones possible, as I do fish in areas that produce Pike, while at the same time not wanting to spook the Trout...
@@NobleKorhedron Either way will reduce line twist. An anti-kink vane will probably outlast most swivels because a swivel can rust or corrode over time and lose its ability to spin internally and fight line twist. But a vane is much more conspicuous and may spook fish more than a swivel would. I prefer swivels, personally.
I completely understand your point about the vane, @@FishingwithNat; are there any particular small - medium swivels you'd recommend that will resist rust well in freshwater? If it matters at all, I mainly use Flambeau Z-Rust lure boxes for storage of everything but individual jig heads.
My son turned me into a spinner fan !! Who would have thought that 15yr would teach his momma some new tricks 😝. I absolutely love mepps! And roostertails. I’ve been slaying them this year with them and caught some real monsters.
Spinners and spoons and I have a box of grubs and jigs, I have a sling bag I carry, I used black and orange fury today and I caught white bass/sand bass, and a nice large mouth, those are the only lures I use, I also have a catfish box, but you can catch about anything on those lures multi species, it was overcast today.
The only spinner I use for trout is a Panther Martin. I’ve tried plenty but day in and day out, Panthers have produced thousands of trout for me from Washington State, Oregon, California Sierras to Tennessee! I’m convinced that they are the best spinners on earth!
Replacement arrived!By the way, I did forget to mention that the original lure did have a decent strike however as most anglers will attest you can get a hit th-cam.com/users/postUgkxCbNOWAGmn6nfbCbJDmasvBq7J38KZNw2 and fish will hang on and release lure. I used the replacement lure yesterday and ran thru a Shimano Waxwing, Kastmaster, Bobber (set to sink). I found the does run deep (I casting on the flats 3.5'). Make sure you adjust your rate of retrieve and rod tip angle (up) to prevent getting snagged on bottom. Used it a couple of times and action was very lifelike (looked like local bait fish for trevally), craftsmanship very good....however eyeball fell out. I asked for replacement and it is on it's way! It was very easy to change out treble to single inline hook.
Caught a small striped bass in my local river today. Too small for food but it was my second fish ever so a nice confidence booster on my in-line spinner. Thanks Nat :)
Even though I'd say I've been pretty successful using spinner baits most of my life, I continue to get more knowledge from videos like this. Great video!
I remember an epic moment early this spring with a 1/4 oz rooster tail. A rainbow trout bit a fly off the top of the water. I casted right at him, reeled in a tiny bit, and felt a thud. It was a nice 2 lb rainbow
Great information, I really like using spinners because they work really well for catching bass, pike, bluegill, trout… pretty much anything! Great job on this video, I love the underwater shots of the spinners!
You should see my box, @@FishingwithNat; I have a Flambeau model 5007(or possibly 5005) with Z-Rust inserts. It's divided into the following sections * hooks/disgorgers/snips/scissors * small/medium plugs * medium/large plugs * floating topwater lures * slow-sinking topwater lures/poppers * small/medium spinners * medium/large spinners * Flying C spinners (mainly for salmonids) * Tasmanian Devils * Chatterbaits * Minnows * spare anti-kink vanes And those are just the sections I remember off-hand... I have another entire 5005(possibly 5007) box I always carry with all of my soft lures of various kinds; paddle tails, ribbon tails, shads, etc.
I absolutely love the Mepp's Aglia. My favorite is the 1/6 oz with the willow blade and orange glow in the dark treble hook shank cover. No hair skirt needed. If there's a lure that I would choose to use, to guarantee that I catch fish that day, it would definitely be the 1/6 oz Mepp's Aglia. It'll catch sunfish, perch, bass, and even pike species. It's a very effective and very affordable lure.
Agreed. An Aglia or Rooster Tail have always produced fish for me. I am always shocked when people tell me that they've never used a spinner or never caught anything on one.
Excellent video! Black and silver Roostertail. Pike, walleye, crappie, black bass, white bass, channel cat, sauger, flathead, perch. It's my all time favorite and most productive artificial bait
I've had a lot of success with Blue-Fox Vibrax , i think they "rattle" a little bit which helps get the fishes attention. Also , Celta (great spinner and easy to replace the hook) . Spinners don't necessarily allways have to be shiny though. I've had a lot of success using black spinners.
Definitely. There are a lot of spinners with painted blades instead of polished metal. I like the Vibrax spinners too - I remember as a kid I would go to a small creek that flowed into the river near my house and cast a Vibrax minnow spin. The number of big rock bass and largemouth I would catch there on the Vibrax spinner was just unbelievable.
As one who has fun making their own inline spinners, this was a SUPER helpful video!! I actually made several of mine with weedless hooks exactly like shown in the video. Kinda feeling unoriginal now. 😅
@@FishingwithNat treble hooks I’ll leave bare simply because I don’t know how to tie on “feathers” or “hair” I bought a kit with pre dressed hooks for that. If I build one with a weedless hook, I’m tossing on what ever the fish are feeling like. My fave, though I have yet to catch anything with them, is these curly tail grubs with glow in the dark tails! Small rubber minnows or rubber frogs are good too. 😁 pike love them some spinner frogs come mid/late summer. 🎣
@@diaryofagoat-lass1023 Look into fly tying, it’s actually really easy and great fun! You need a vise, scissors, thread, a bobbin, and some glue, and the variety of hair and fur up you can attach is endless.
Spinners are a blast, and I agree they're a great choice for the beginner angler -- especially because they attract such a variety of fish. Mepp's are great, but can be pricey, especially if you're learning where/where not to throw spinners. I would add to your comments that even cheap spinners catch fish, so don't be afraid to throw something like Walmart's South Bend value pack or whatever is most budget-sensitive for you. Great video -- thanks for sharing!
Totally agree! I would say Mepps' spinners and Rooster Tails are the cream of the crop, but a lot of other brands will catch plenty of fish too. I have had luck with South Bend spinners, Panther Martins, Blue Fox, and others.
Can confirm about learning where not to throw hahaha. Got mine stuck around a tree branch 15-20 feet above the water and broke it off while yanking on it. It will be dangling there for quite some time to remind me of that day. I’m learning to kayak fish and figured if I get a lure stuck I’d be able to paddle over and remove it. Gonna have to diy a 10 ft ladder onto the yak somehow hahaha
Nice breakdown of these spinners. Your selection is almost exactly what I have in my tacklebox. A few sizes of Mepps aglia in (rainbow FTW), a couple small rooster tails, and a perch or shiner comet. I can fish any stream with those around here in the north east.
I had a big Mepps weed master and that thing caught me more pike than any other lure I’ve ever owned. It was bright pink which is what I found so hilarious about it. I snagged it on a submerged root and have been looking for one in a shop for months.
I grew up casting Rooster Tails for trout in Central NJ. I have a good assortment of sizes now and use them to catch just about any fish that swims…largemouth, smallmouth, perch, northern pike in Ontario, trout. I have some huge ones for musky, but I haven’t thrown them 10,000 times yet.
When I was a kid I threw spinners almost every time I went fishing because they so reliably caught fish for me. Smallmouth, largemouth, rock bass, and pike. I fished for years without really even learning how to use other baits because I never saw a reason to change my lure!
Man, I absolutely love your videos. Simple, easy to understand, and to the point. Even as an experienced angler, although still relatively young, I can't stop watching your beginner guides (never mind the other ones).❤ If I may, you keep using the verb "casted" [1:04] in various tenses. Especially past tense. It is an incorrect form of the word. It is always either "cast" or "casting." For present, future, or past. 😀
Hmm - that's interesting. I didn't know that cast is the correct past-tense in this case. Thanks for teaching me something in exchange for learning from my videos. :)
When I make my own Inline spinners, I find most kits you buy never have enough brass to make them heavy enough for effective casting or depth, so I make my favourite hybrid inline spinners, where the top is standard spinner fair bot the bottom, I attach a small minnow head jig and slip a nice juicy curly tail on, especially if it has a glow in the dark tail. Good casting weight and the pike just can’t ignore them. I made some double blade spinners this time and I think I did not too bad. Silver+green and Red+gold, paired respectively with blue silver and hi vis orange curly tails.
Mepps Nr. 5 Aglia in Gold is my absolut Pike and Perch Killer in my home waters over here in Europe, can only recommend! Its always my last lure to fish on every fishing day.
Panther martin yellow with red in murky and black with yellow in clear water are what I use for trout, those 2 are significantly more effective than my other ones.
Of all the considerable choice out there, only Joe's Flies Potomac Coachman (nickel blade) has come close to Mepps Aglia for lake trout in my experience here in British Columbia. Great video, thanks.
Shockingly I say it...this presentation grants PHD diploma in spinning lures _ techniques and tips, a crow bar effects (eyes opener) on these guys who already claim ,, years of experience "🤣 pleasantly devastated, I'm watching 👀 your show over and over .. all the best from pacific north west👍
I'm surprised not to much mention of blue fox . Im in northern California and have been making squid spinners with different color and type of blades and river friendly weight
Blue Fox makes good spinners too. One of my favorite spinners as a kid was a Blue Fox minnow spin. I caught hundreds of rock bass and smallmouth on that thing.
love Joes Flies spinners. Although my Thomas Spinner 4 gold beads and an orange bead(Trout lure) SLAY PIKE . I use 6# test on a 5'6 ultra light Mitchel 300(Old) reel or ambassador 5500 with 15# lead core. Mepps Aguila are go to as well.
Great video, thanks! I really like rooster tails and panther martins. I have all the supplies to build my own but haven't started yet. On the list before river salmon and fall pike fishing gets going
Trust me when I say this, once you start making your own you will continue and have a lot of fun with it. I have been making my own and they work great!
@@FishingwithNat it is fun and it really is rewarding when you catch some nice fish with your own homemade spinners. You just need some basic hand tools and a pair of round nose pliers. Hit me up if you have questions.
@@joaotorres2810 Cool. Are you running them near the bottom? I've had cats take my crankbaits all the time but I've only ever caught one cat on a spinner.
@@John-vu5qm Pike are very good at finding spinners in cloudy water. I'd suggest a gold-bladed inline spinner or spinnerbait, or a Mepps black fury with a black/yellow or black/orange pattern.
@FishingwithNat Thanks, yes I have a gold in line spinner also a bete lotto spinner if you've ever heard of it it has caught a lot of fish love your videos!!
Cool vids, just got back into it. All these vids really help me out. Used to only just use spinners but crank baits feel the best. Get more bass with cranks, dont like pikes lol
@@Akon-D Their teeth are nasty. I've had big ones cut 50lb fluorocarbon leader. Sometimes it seems the only thing that won't get cut by pike is steel wire.
@@FishingwithNat any bright colour grub with sparkle works fine. But as I don't like rubber because it tends to melt paint and plastic of others lures, I started to use very fluffy dressed treble hooks and they work fine too especially in the river, bucktails and woolly worms are very easy to make and very effective with panfish like perch.
How do you add weight above the spinners, i bought some cheap spinners from temu app they are only 3 grams and they don't cast very far , can you please help me or make a video about it😢
The easiest way to add weight above a spinner is just to clamp on a tiny split shot sinker about a foot up from the spinner. Another way to do it is to tie a snap swivel to your spinner connected directly to the spinner. Or you can add a swivel further up your line.
@@jimtruscott5670 If I could only have one small spinner for trout/panfish, it would probably be a Rooster Tail. If it was a large spinner for musky/pike/salmon, it would be a #4 or #5 Mepps Aglia. But as I said, I've used a lot of spinners and they all seem to work well.
I tend to run a 3g cheb weight in front of my spinner to help it run a little deeper. This also helps because if i decide to vary the speed or add small/short pauses to my retrieve. The cheb will help the blade keep some momentum as it pulls the spinner deeper into the water. Some of my best pike were caught using this method. The only real downside is you find that due to where the weight is located (in front of the lure...) the lure will often end up with one of the hooks on the treble wrapped over the leader/trace so requires a second of untangling after you wind it back in, but so long as you feather the lure with a finger on the spool before it hits the water when you cast. Everything should be just fine as it gives the lure time to straighten out before it hits the water. But you could just bypass all this by getting a heavier lure but that costs money. (you could try a 5 or 7g cheb weight but i've never had to. 3g is what works for me!)
I haven't used the Bronze Slammer myself, but I am rarely disappointed by a Mepps spinner. They make good stuff and I appreciate that their headquarters is right here in Wisconsin.
You could attach it with a swivel and a split ring. It might need a bit of leader line to get it far enough back beyond the tail and out of the main blade's turbulence. There are also trailer hooks that you can add, and some of those come with swivels and blades.
I don't have any specific boxes for inline spinners. They do get tangled up when you put a bunch into a pile, but I just deal with that. I'm usually fishing out of kayaks and I typically take 1 box or 2 at most.
Is it just me, or do Mepps spinners have no range when you cast them? Maybe I need to move up to a medium heavy rod for those 1/3 and 1/2 ounce spinners.
A lighter line will give you more casting distance than a heavier rod will. Heavy fluoro or mono lines don't allow you to cast small lures very far. 1/3oz spinners work well with a medium-light or medium power rod and 8lb mono/fluoro or 8-15lb braid.
Longer casts will make the spinner run horizontally and more effectively. I would suggest running the spinner as slow as possible to keep the blade running. You can also twitch it occasionally to get fish to bite if they are just following it out of curiosity.
Learning angler here. Have had some luck catching bass and even a northern pike on a spinner from fishing lake and pond shores. It has been weeks since I have caught anything and I have lost 5 spinners to larger creeks and rivers by getting snagged on rocks. Starting to get discouraged. Any tips for not losing spinners to rocks or snags? Thanks!!
Unfortunately, spinners are good at getting snagged because of the treble hooks that most come with. You could look for spinners with single hooks - many brands sell popular models with a choice between single or treble hooks. Otherwise, the best you can do is to keep your spinner up high where you can see it, and actively avoid snags.
I would suggest just adding a split shot sinker about a foot ahead of the spinner. You can adjust the weight of the sinker depending on the conditions you're fishing in.
Some people do it. Unless it's perfectly centered on the treble, it can create uneven drag and result in the entire lure spinning around and potentially overwhelming the swivel. I generally don't like adding any kind of trailer to an inline spinner. I opt for a spinner with a dressed hook for a similar appearance without the unbalanced effect of adding a trailer on one of the hooks.
Your videos are absolutely high quality! Everything thing is well done: the information, the presentation, narration, the camera work, audio, and you get right to the point. Thank you for your time!
Thanks so much for the comment. I put a lot of work into these videos and it's nice to see that recognized. :)
So to clarify, @@FishingwithNat, you would recommend a swivel over an anti-kink vane? I used to have serious issues with kinking line, so since returning to lure fishing at the start of the pandemic, I've always used anti-kink vanes rather than swivels.
Mine are clear, hopefully low visibility, and are always mounted 12" - 18" up the line from my wire traces; for traces, I use the smallest, lightest ones possible, as I do fish in areas that produce Pike, while at the same time not wanting to spook the Trout...
@@NobleKorhedron Either way will reduce line twist. An anti-kink vane will probably outlast most swivels because a swivel can rust or corrode over time and lose its ability to spin internally and fight line twist. But a vane is much more conspicuous and may spook fish more than a swivel would. I prefer swivels, personally.
I completely understand your point about the vane, @@FishingwithNat; are there any particular small - medium swivels you'd recommend that will resist rust well in freshwater?
If it matters at all, I mainly use Flambeau Z-Rust lure boxes for storage of everything but individual jig heads.
@@NobleKorhedron I like the stainless steel VMC swivels www.cabelas.com/shop/en/vmc-stainless-steel-rolling-swivel
My son turned me into a spinner fan !! Who would have thought that 15yr would teach his momma some new tricks 😝. I absolutely love mepps! And roostertails. I’ve been slaying them this year with them and caught some real monsters.
Both of those are excellent lures. I rarely leave home without both of them.
Panther Martin black body with yellow body and gold blade….nuff said!
@@tomcat122200 Yellow spinners with gold blades are some of my most productive baits ever on the rivers around here.
Spinners and spoons and I have a box of grubs and jigs, I have a sling bag I carry, I used black and orange fury today and I caught white bass/sand bass, and a nice large mouth, those are the only lures I use, I also have a catfish box, but you can catch about anything on those lures multi species, it was overcast today.
love this!!!
The only spinner I use for trout is a Panther Martin. I’ve tried plenty but day in and day out, Panthers have produced thousands of trout for me from Washington State, Oregon, California Sierras to Tennessee! I’m convinced that they are the best spinners on earth!
Awesome. Thanks for sharing.
Replacement arrived!By the way, I did forget to mention that the original lure did have a decent strike however as most anglers will attest you can get a hit th-cam.com/users/postUgkxCbNOWAGmn6nfbCbJDmasvBq7J38KZNw2 and fish will hang on and release lure. I used the replacement lure yesterday and ran thru a Shimano Waxwing, Kastmaster, Bobber (set to sink). I found the does run deep (I casting on the flats 3.5'). Make sure you adjust your rate of retrieve and rod tip angle (up) to prevent getting snagged on bottom. Used it a couple of times and action was very lifelike (looked like local bait fish for trevally), craftsmanship very good....however eyeball fell out. I asked for replacement and it is on it's way! It was very easy to change out treble to single inline hook.
Thanks for watching
Caught a small striped bass in my local river today. Too small for food but it was my second fish ever so a nice confidence booster on my in-line spinner. Thanks Nat :)
Awesome - way to go!
Anything is fun! Congrats
junior angler here. this was perfect. thanks so much
I'm glad to hear that. Thanks for the comment
They catch everything
My favorites are the Mepps Agila dressed, Panther Martin Classic, and Yakima Rooster Tail
Those are all excellent
Great video. No bs all info. Learned a lot in a short amount of time. Thanks man
Thanks - that's my style. No need for fluff - just get to the point.
Even though I'd say I've been pretty successful using spinner baits most of my life, I continue to get more knowledge from videos like this. Great video!
Thanks - I appreciate it
I remember an epic moment early this spring with a 1/4 oz rooster tail. A rainbow trout bit a fly off the top of the water. I casted right at him, reeled in a tiny bit, and felt a thud. It was a nice 2 lb rainbow
Awesome
Mepps black fury in red spots on black is my all time favorite . I have had walleye, Bass, pike and Muskie on a #3.
It's a great lure. I use it all the time.
thank you Nat, I love your videos, clear, simple to understand, and direct to the point, apreciate it.
Great - thanks for this feedback
Great information, I really like using spinners because they work really well for catching bass, pike, bluegill, trout… pretty much anything! Great job on this video, I love the underwater shots of the spinners!
I never go fishing without a few spinners in my box. They are definitely some of my favorite lures.
You should see my box, @@FishingwithNat; I have a Flambeau model 5007(or possibly 5005) with Z-Rust inserts.
It's divided into the following sections
* hooks/disgorgers/snips/scissors
* small/medium plugs
* medium/large plugs
* floating topwater lures
* slow-sinking topwater lures/poppers
* small/medium spinners
* medium/large spinners
* Flying C spinners (mainly for salmonids)
* Tasmanian Devils
* Chatterbaits
* Minnows
* spare anti-kink vanes
And those are just the sections I remember off-hand...
I have another entire 5005(possibly 5007) box I always carry with all of my soft lures of various kinds; paddle tails, ribbon tails, shads, etc.
I absolutely love the Mepp's Aglia. My favorite is the 1/6 oz with the willow blade and orange glow in the dark treble hook shank cover. No hair skirt needed. If there's a lure that I would choose to use, to guarantee that I catch fish that day, it would definitely be the 1/6 oz Mepp's Aglia. It'll catch sunfish, perch, bass, and even pike species. It's a very effective and very affordable lure.
Agreed. An Aglia or Rooster Tail have always produced fish for me. I am always shocked when people tell me that they've never used a spinner or never caught anything on one.
I believe that is an aglia long . Any Mepps is awesome
@@garysavala665 Yeah the Aglia Long models have the willow blade for more depth. Mepps makes great stuff.
Works for salmon
Excellent video!
Black and silver Roostertail. Pike, walleye, crappie, black bass, white bass, channel cat, sauger, flathead, perch. It's my all time favorite and most productive artificial bait
It's hard to beat a Rooster tail! It's one of my favorite baits too.
Concise, well informed, quality content is so hard to find. Thank you!
Thank you - I appreciate you taking the time to leave this feedback.
Extremely well done! My tackle box isn't completed unless I've got some Mepps spinners in it and it was nice seeing each style compared.
Thanks. I'm glad you enjoyed it!
Mine either I love mepps aglias and comet minnows
I've had a lot of success with Blue-Fox Vibrax , i think they "rattle" a little bit which helps get the fishes attention. Also , Celta (great spinner and easy to replace the hook) . Spinners don't necessarily allways have to be shiny though. I've had a lot of success using black spinners.
Definitely. There are a lot of spinners with painted blades instead of polished metal. I like the Vibrax spinners too - I remember as a kid I would go to a small creek that flowed into the river near my house and cast a Vibrax minnow spin. The number of big rock bass and largemouth I would catch there on the Vibrax spinner was just unbelievable.
Great vid. The vibrax bullet type spinners have always done well for me
Thanks. That was my favorite lure as a kid. I used to pull some huge rock bass out of the local stream with it.
As one who has fun making their own inline spinners, this was a SUPER helpful video!! I actually made several of mine with weedless hooks exactly like shown in the video. Kinda feeling unoriginal now. 😅
Thanks for the comment. That sounds like fun to make your own inline spinners. Do you dress the hooks or leave them empty?
@@FishingwithNat treble hooks I’ll leave bare simply because I don’t know how to tie on “feathers” or “hair”
I bought a kit with pre dressed hooks for that.
If I build one with a weedless hook, I’m tossing on what ever the fish are feeling like. My fave, though I have yet to catch anything with them, is these curly tail grubs with glow in the dark tails! Small rubber minnows or rubber frogs are good too. 😁 pike love them some spinner frogs come mid/late summer. 🎣
@@diaryofagoat-lass1023 Cool. It's hard to beat the classic and inexpensive curly-tail grub.
@@diaryofagoat-lass1023 Look into fly tying, it’s actually really easy and great fun! You need a vise, scissors, thread, a bobbin, and some glue, and the variety of hair and fur up you can attach is endless.
Spinners are a blast, and I agree they're a great choice for the beginner angler -- especially because they attract such a variety of fish.
Mepp's are great, but can be pricey, especially if you're learning where/where not to throw spinners. I would add to your comments that even cheap spinners catch fish, so don't be afraid to throw something like Walmart's South Bend value pack or whatever is most budget-sensitive for you.
Great video -- thanks for sharing!
Totally agree! I would say Mepps' spinners and Rooster Tails are the cream of the crop, but a lot of other brands will catch plenty of fish too. I have had luck with South Bend spinners, Panther Martins, Blue Fox, and others.
You can try blue fox flash . Cheap and the bass love them
Can confirm about learning where not to throw hahaha. Got mine stuck around a tree branch 15-20 feet above the water and broke it off while yanking on it. It will be dangling there for quite some time to remind me of that day.
I’m learning to kayak fish and figured if I get a lure stuck I’d be able to paddle over and remove it. Gonna have to diy a 10 ft ladder onto the yak somehow hahaha
Nice breakdown of these spinners. Your selection is almost exactly what I have in my tacklebox. A few sizes of Mepps aglia in (rainbow FTW), a couple small rooster tails, and a perch or shiner comet. I can fish any stream with those around here in the north east.
You bet. Those are all awesome. The rainbow trout pattern Aglias are great too.
Awesome underwater footage!
Thanks!
I had a big Mepps weed master and that thing caught me more pike than any other lure I’ve ever owned. It was bright pink which is what I found so hilarious about it.
I snagged it on a submerged root and have been looking for one in a shop for months.
It's a great spinner for tossing through sparse vegetation. Not easy to find in a store though!
I grew up casting Rooster Tails for trout in Central NJ. I have a good assortment of sizes now and use them to catch just about any fish that swims…largemouth, smallmouth, perch, northern pike in Ontario, trout. I have some huge ones for musky, but I haven’t thrown them 10,000 times yet.
Throw them a few thousand more times and you'll get one!
This is the most thorough and well presented video I’ve seen on this subject thank you very much sir
Thank you - I appreciate the comment.
I absolutely love my spinners as they rarely disappoint. The Blue Fox Vibrax are my favorites, but little Meps and Worden's Roosters are nice too.
When I was a kid I threw spinners almost every time I went fishing because they so reliably caught fish for me. Smallmouth, largemouth, rock bass, and pike. I fished for years without really even learning how to use other baits because I never saw a reason to change my lure!
Blue Fox, Rooster Tails, and Spin N' Glo's are my go-to lures. Fox & Rooster Tails are my fav's for trout and Foxes & Spin N' Glo's for salmon
It's hard to beat a rooster tail. I have a ton of those things.
Rewatching this video. Again, very well done. And thanks for reminding me what to do. I'm in smallmouth country and these work excellent on them.🎉🎉
Man, I absolutely love your videos. Simple, easy to understand, and to the point. Even as an experienced angler, although still relatively young, I can't stop watching your beginner guides (never mind the other ones).❤
If I may, you keep using the verb "casted" [1:04] in various tenses. Especially past tense. It is an incorrect form of the word. It is always either "cast" or "casting." For present, future, or past. 😀
Hmm - that's interesting. I didn't know that cast is the correct past-tense in this case. Thanks for teaching me something in exchange for learning from my videos. :)
@FishingwithNat Awesome to know I could teach you something too:) Keep up the great videos, Nat 👍
Thanks, Nat.
Excellent vid. 👍🏼
I've not been using in-line spinners recently.
Time to try them again.
They are fantastic lures. Thanks for the comment.
these videos are great thankyou very much 🥰😍🤩
Great - thank you
When I make my own Inline spinners, I find most kits you buy never have enough brass to make them heavy enough for effective casting or depth, so I make my favourite hybrid inline spinners, where the top is standard spinner fair bot the bottom, I attach a small minnow head jig and slip a nice juicy curly tail on, especially if it has a glow in the dark tail. Good casting weight and the pike just can’t ignore them.
I made some double blade spinners this time and I think I did not too bad. Silver+green and Red+gold, paired respectively with blue silver and hi vis orange curly tails.
Very cool
No words! What a content!!
Thanks - I appreciate the feedback and I'm glad you enjoyed the video!
Best angling channel I've ever seen ❤
Thanks - I appreciate that. 🙂
Panther Martin & Rooster Tail have brought me the most "luck" for Trout in streams.
Hard to beat either of those!
Mepps Nr. 5 Aglia in Gold is my absolut Pike and Perch Killer in my home waters over here in Europe, can only recommend! Its always my last lure to fish on every fishing day.
That's one of my absolute favorite spinners too. The pike and musky around here smash it.
Panther martin yellow with red in murky and black with yellow in clear water are what I use for trout, those 2 are significantly more effective than my other ones.
Cool, thanks for sharing
This really helped me with all the info and hardware Thanks
Thanks for the comment.
I had a spinner once.
Only once?
Then I took an arrow to the knee.
I lost one just a couple days ago and nearly went for a swim trying to get it back 😂
That's great. 👍🏻
😁
Great info! Perfect. No fuss.
Thanks - I appreciate the comment.
You're doing great work!! Thank you 😁
Thanks - I appreciate it
Of all the considerable choice out there, only Joe's Flies Potomac Coachman (nickel blade) has come close to Mepps Aglia for lake trout in my experience here in British Columbia. Great video, thanks.
Cool - I've tried other spinners but I keep coming back to the Aglia and the Rooster Tail. I hadn't yet heard of the one you mentioned.
Shockingly I say it...this presentation grants PHD diploma in spinning lures _ techniques and tips, a crow bar effects (eyes opener) on these guys who already claim ,, years of experience "🤣 pleasantly devastated, I'm watching 👀 your show over and over .. all the best from pacific north west👍
Thanks - I appreciate your comment. More to come...
Rooster tail is my favorite. Fishing them my whole life
You can't go wrong with a rooster tail. They are excellent.
❤❤❤❤❤❤❤❤ beautiful video
Thank you
very good lure, thank you very much for sharing videos that are very useful for anglers
Thanks for the comment.
Thank you for this info and god bless
Thanks for the comment. I'm glad you enjoyed the video.
Great video 🤙🏽
Thanks
good job Nat , as usual
Thank you
Caught 3 bass today back to back with the black and gold.
Very nice
Yeah, I did switch to a comet but too late.... 🤣 awesome video.
Next time you'll know better!
I fish smallmouth bass, and this lure is kind of like my “wacky worm”. Whenever no other lure is working, I’m throwing on a rooster tail
You bet. I've caught countless smallies on rooster tails
Inline and small jig n grubs. Work great in pressured waters.
@@Chasin_Baitman Agreed
Love mepps, caught a 40+ inch pike the other day with a green one
Awesome
Greetings from Northern Ireland......subscribed
Thanks!
Joe's Flies "White Miller" with a single trailer hook #1 spoon. I've caught 5lb 14oz Large mouth Bass on it and all species in cold water streams.
Cool - I haven't heard of that one
Great video, very informative 👍
Thank you
I'm surprised not to much mention of blue fox . Im in northern California and have been making squid spinners with different color and type of blades and river friendly weight
Blue Fox makes good spinners too. One of my favorite spinners as a kid was a Blue Fox minnow spin. I caught hundreds of rock bass and smallmouth on that thing.
love Joes Flies spinners. Although my Thomas Spinner 4 gold beads and an orange bead(Trout lure) SLAY PIKE . I use 6# test on a 5'6 ultra light Mitchel 300(Old) reel or ambassador 5500 with 15# lead core. Mepps Aguila are go to as well.
It's hard to beat the fun of ultralight fishing with spinners.
Great video, thanks! I really like rooster tails and panther martins. I have all the supplies to build my own but haven't started yet. On the list before river salmon and fall pike fishing gets going
Definitely - both of those are great. Essential baits to have for fall salmon and pike!
Trust me when I say this, once you start making your own you will continue and have a lot of fun with it. I have been making my own and they work great!
@@erichildreth7562 I haven't made any of my own yet but I've seen some very neat homemade spinners and it looks like fun to make them.
@@FishingwithNat it is fun and it really is rewarding when you catch some nice fish with your own homemade spinners. You just need some basic hand tools and a pair of round nose pliers. Hit me up if you have questions.
@@erichildreth7562 Sounds like a fun winter project!
What brand swivel do you recommend?
I'm not partial to a particular brand but I tend to use VMC swivels and snaps.
Panther Martin has left the chat
Panther Martin makes some nice spinners. I really like my Rooster Tails and Mepps spinners though.
Love this video! My goto for trout is thomas brand inlines. My goto for big fish is mepps #4 and #5!!
I'm tying up a Mepps #4 chartreuse and a Mepps #5 black fury right now for a pike/musky trip tomorrow. They never fail me.
@@FishingwithNat good luck we have been tearing up channel catfish on the #5 and #4s
@@joaotorres2810 Cool. Are you running them near the bottom? I've had cats take my crankbaits all the time but I've only ever caught one cat on a spinner.
Very Nice - Thanks!
😎👍
Thanks for the feedback!
What would be the best spinner for pike in cloudy water?
3:40 I have that spinner on the left except for the hair on the hook and the spoon is bronze and kinda rusty
@@John-vu5qm Pike are very good at finding spinners in cloudy water. I'd suggest a gold-bladed inline spinner or spinnerbait, or a Mepps black fury with a black/yellow or black/orange pattern.
@FishingwithNat Thanks, yes I have a gold in line spinner also a bete lotto spinner if you've ever heard of it it has caught a lot of fish love your videos!!
@@John-vu5qm Awesome, thank you
Ive never had any luck pr skill with spinners rooster tails or mepps specifically
Those are both some of my most successful lures!
Subscribed. Excellent content
Thanks. Glad you enjoyed the video!
Great video. Thanks
Thanks for the feedback. I appreciate it.
-Panther Martin spinners are trout getters.
Blue Fox Musky Buck is superb for pike & lunge.
An oldie was the JuneBug spinner with a single weedless hook & a nightcrawler thru the coontail & cabbage.
I luv your videos too...Fish On !
@@danreid6712 All good recommendations. Tight lines!
Almost everytime I use these I catch something. Mepps are wonderful.
Same here - I love spinners.
Cool vids, just got back into it. All these vids really help me out. Used to only just use spinners but crank baits feel the best. Get more bass with cranks, dont like pikes lol
They can be a pain but they sure are fun. Cranks and spinners are both awesome baits.
Where I'm from the pike are on steroids. Their teeth are wayyy too intimidating.
@@Akon-D Their teeth are nasty. I've had big ones cut 50lb fluorocarbon leader. Sometimes it seems the only thing that won't get cut by pike is steel wire.
A swivel usually don't help much. You can use off center head weight to avoid line twist, such as the Mepps Lusox do.
A swivel can help but only if it's a decent quality one. Cheaper swivels will get jammed or rusted and the whole swivel will spin with the lure.
Got my first ever pike and walleye on these
Cool. I caught my largest walleye (28") on an inline spinner, and countless pike. They can't resist a #5 Mepps.
Mepps #2 & #3 dressed with a tri colored (white, yellow & green) blade for Northern & Bass
A solid choice
In North Italy we use a lot trailers, they work great with perch.
Cool. What kinds of trailers do you put on them?
@@FishingwithNat any bright colour grub with sparkle works fine. But as I don't like rubber because it tends to melt paint and plastic of others lures, I started to use very fluffy dressed treble hooks and they work fine too especially in the river, bucktails and woolly worms are very easy to make and very effective with panfish like perch.
@@monicabello3527 Cool - thanks for the feedback.
Panther Martin are great trout lures. Roadrunner jig
Agreed. Thanks for the feedback.
New sub channel is very informative thanks for sharing
Great - thanks for your comment.
Any style Panther Martin was my favorite for everything
Those are good spinners too
How do you add weight above the spinners, i bought some cheap spinners from temu app they are only 3 grams and they don't cast very far , can you please help me or make a video about it😢
The easiest way to add weight above a spinner is just to clamp on a tiny split shot sinker about a foot up from the spinner. Another way to do it is to tie a snap swivel to your spinner connected directly to the spinner. Or you can add a swivel further up your line.
@@FishingwithNatthank you, will a Carolina rig work for spinners
All I fish with almost is spinners in pa it’s been consistently good for all species! I use them to troll on me canoe
Cool. Spinners are some of my most reliable lures.
See that coho bolo, the best lure of the lot, caught thousands of salmon and steelhead with that lure.
Cool. It's great for pike too.
For pike, I've always have had pretty good luck with a mepps aglia 4 and a plastic grub.
Do you put it right on the treble hook or on a stinger hook?
@@FishingwithNat Right on the treble. Usually a white Mister Twister.
@@garskoci Interesting!
Panther Martin spinners are the best available.
They are great baits
@@FishingwithNat The best available spinners.
@@jimtruscott5670 I use lots of Rooster Tails, Mepps spinners, Blue Fox, and Panther Martins and I love them all.
@@FishingwithNat Bravo !Do you happen to think that some work better than others or is that something you don’t consider or care about ?
@@jimtruscott5670 If I could only have one small spinner for trout/panfish, it would probably be a Rooster Tail. If it was a large spinner for musky/pike/salmon, it would be a #4 or #5 Mepps Aglia. But as I said, I've used a lot of spinners and they all seem to work well.
Ive has the best luck with the Panther Martin in line spinners and spinners with Red Hooks
Thanks for the feedback
Excellent video mate.
Very informative. LIKE
👏👏👏👍👍👍👍👍
Great - thank you for the comment.
My favorite in line spinner is one with a fish on it
Those are the best
I tend to run a 3g cheb weight in front of my spinner to help it run a little deeper. This also helps because if i decide to vary the speed or add small/short pauses to my retrieve. The cheb will help the blade keep some momentum as it pulls the spinner deeper into the water. Some of my best pike were caught using this method.
The only real downside is you find that due to where the weight is located (in front of the lure...) the lure will often end up with one of the hooks on the treble wrapped over the leader/trace so requires a second of untangling after you wind it back in, but so long as you feather the lure with a finger on the spool before it hits the water when you cast. Everything should be just fine as it gives the lure time to straighten out before it hits the water.
But you could just bypass all this by getting a heavier lure but that costs money.
(you could try a 5 or 7g cheb weight but i've never had to. 3g is what works for me!)
Good feedback - thanks!
This is genious!
This was awesome thanks so much! Definitely gave me some ideas. Do you have an opinion on the Mepps Bronze Slammer?
I haven't used the Bronze Slammer myself, but I am rarely disappointed by a Mepps spinner. They make good stuff and I appreciate that their headquarters is right here in Wisconsin.
How would you attach a trailing spinner? Like one at the end of a long musky bucktail? Barrel Swivel maybe?
You could attach it with a swivel and a split ring. It might need a bit of leader line to get it far enough back beyond the tail and out of the main blade's turbulence. There are also trailer hooks that you can add, and some of those come with swivels and blades.
What would you recommend to b the best inline spinner tackle boxes?
I don't have any specific boxes for inline spinners. They do get tangled up when you put a bunch into a pile, but I just deal with that. I'm usually fishing out of kayaks and I typically take 1 box or 2 at most.
#5 chartreuse Aglia black fury!
That's a killer bait!
Is it just me, or do Mepps spinners have no range when you cast them? Maybe I need to move up to a medium heavy rod for those 1/3 and 1/2 ounce spinners.
A lighter line will give you more casting distance than a heavier rod will. Heavy fluoro or mono lines don't allow you to cast small lures very far. 1/3oz spinners work well with a medium-light or medium power rod and 8lb mono/fluoro or 8-15lb braid.
@@FishingwithNat Thanks for the tip I'll go with a ligher mono.
@@Patton243 Sounds good. Good luck fishing!
I fish with the spinner but never catch anything are there things I can do wrong?
Longer casts will make the spinner run horizontally and more effectively. I would suggest running the spinner as slow as possible to keep the blade running. You can also twitch it occasionally to get fish to bite if they are just following it out of curiosity.
The king of all spinners is the Panther Martin.
Good stuff
Learning angler here. Have had some luck catching bass and even a northern pike on a spinner from fishing lake and pond shores. It has been weeks since I have caught anything and I have lost 5 spinners to larger creeks and rivers by getting snagged on rocks. Starting to get discouraged. Any tips for not losing spinners to rocks or snags? Thanks!!
Unfortunately, spinners are good at getting snagged because of the treble hooks that most come with. You could look for spinners with single hooks - many brands sell popular models with a choice between single or treble hooks. Otherwise, the best you can do is to keep your spinner up high where you can see it, and actively avoid snags.
Mepps #3 all white, gold blades.. or purple or pink... trust me big smallies
It's hard to beat a #3 mepps
2:29 omg that particular snagged is so cute 😍😍 😭
Glad you enjoyed the video
I like it
Thanks
How to add weight to the spinners for deeper water.Ty
I would suggest just adding a split shot sinker about a foot ahead of the spinner. You can adjust the weight of the sinker depending on the conditions you're fishing in.
Mepps spinners are the best
One of my best confidence baits for sure
Do you think rigging a grub trailer of some kind onto a musky spinner is feasible? I've seen examples where the grub is rigged through the treble.
Some people do it. Unless it's perfectly centered on the treble, it can create uneven drag and result in the entire lure spinning around and potentially overwhelming the swivel. I generally don't like adding any kind of trailer to an inline spinner. I opt for a spinner with a dressed hook for a similar appearance without the unbalanced effect of adding a trailer on one of the hooks.