Hey I have Mercedes c class w205 2014. Iv got a message saying park assist inoperative. All the sensors and rear camera works however the park assist on parallel parking (P) doesn’t come up. Any advice?
Hi thanks for the feedback, in this case I didn’t use the red cable as it didn’t ask for it but majority of the coding it does ask for it and it connect into the J2534 unit and then plugs into the Autel machine it’s self.
Bro thank you very much for the video, I have the same car and this fault keeps coming and sometimes when I turn the car on it’s gone and then when I hit bumps car hits the break by it’s own, when I steer right or left the car hits the break by itself and then again the fault comes on the screen, do you think this is the same issue or mine maybe mechanical? Thank you
My 2017 c300 coupe has so may problems that came up on my messages cluster…first thing my drive assist shows inoperative and after two days my collision assist, low beam, front turn signal left and right and sos is also inoperable and and it shows malfunction and see the manual. I don’t know what’s going on.
I have same fault on my c350e , how much would it be to reset it and where are you located? Thanks.
Mine popped up today.. plus left buttons on steering not working rev cam not working and a few other things … same prob ?😊
Hi mate,
You say any coding you do with mercs you have to use this:
Is that a printer cable?
Where does it usually plug in?
Cheers
Unfortunately you do not shown the sensor location.
The fault could come back again, so do you just reset it again?
Thank you ! Verry usefull video ! 👍👍👍
Thank you for your feedback.
Hi mate, how much would you charge for this if i can pop down to you please?
Hello, Traffic Sign Assist inoperative come on my c300 Mercedes Benz and have tried all I could but it’s still not going off. Please any help? Thanks
Hey I have Mercedes c class w205 2014. Iv got a message saying park assist inoperative. All the sensors and rear camera works however the park assist on parallel parking (P) doesn’t come up. Any advice?
@@RiPFLeX786 it maybe a case of coding it in or faulty sensors…
Thank you for the video, what was the use of the red cable? and where do you connect it?
Thanks
Hi thanks for the feedback, in this case I didn’t use the red cable as it didn’t ask for it but majority of the coding it does ask for it and it connect into the J2534 unit and then plugs into the Autel machine it’s self.
@@sadiagnostics Thank you for your quick reply and the explanation :)
great work, Subscribed!
@@sadiagnostics I think this error code is connected to software patch which this box provide you. I’m not sure though
Hello mate, I live in London do you know anywhere I could get this done on my car??
Hello how are you?can i do this with Autel Scanner MaxiCOM MK808S: 2023?? Thank you!!!
Thanks budd Help me a little bit your video, but I have an Autel ms906 pro and the menu is different 😢
Yeh think it may not allow you to do coding like mine it really depends on the model of the machine
Hi mate,what make and model of scan tool are you using and what did it cost?
£3000 Autel Maxisys MS908s pro from bullseye
@@sadiagnostics can a dealership do this for me ?
What Autel model are you using?
Hey mate I am in Manchester do you know someone who has the diagnostic machine and can do this for me?
This message always shows me when start the car, my car is E300 2016 & i don't know how to fix it
I can clear that
@@MrJalesh1 how is that please
@@iembe1638 need to plug in on the computer to see whats causing it.
Bro, I solved the problem with this video. Thank you so much for sharing a good video.I'm going to press subscribe and like.❤❤
Thank you for your feedback :)
I have the same problem with a cla 250 2016 anyone can recruiter me to someone so I can get that fix or a shop
@@DinioEtienne hi am unsure but check the forums on Facebook or online and people can guide you…
Ok I will try sir than yu
Bro thank you very much for the video, I have the same car and this fault keeps coming and sometimes when I turn the car on it’s gone and then when I hit bumps car hits the break by it’s own, when I steer right or left the car hits the break by itself and then again the fault comes on the screen, do you think this is the same issue or mine maybe mechanical? Thank you
It will be same issue but some wiring issue as well.
@@sadiagnostics really appreciate your reply thank you
where can I buy the sensor or what's the part number?
@@neilsupreme not sure on part number but eBay or dealership….
Thanks great video. I need this done on my C220d W205. Can you help
How can I get the system
So how can we do that at home without a fancy diagnostic tool ?
Get a regular obd scanner erase the codes then unplug the battery and plug it back to reset the electronics
Hi Chris could you please tell me whish scanner model you using to code
Hi it’s autel Maxisys ms908s pro
Where are you based?
When can I bring my car as I have the same issue on my E220. Kindly tell me how much you charge and location. I'm near London. Thanks
I can reset that.
Hey man, my car was rear ended and now it gives me that error. Do I need a reset?
hi yes, you can do what ive done or go to someone who has similar machine to me or eve use dealer diagnostic machine to reset it.
I dont get it did u just reset the system or deleted something?
Hi thanks for the video. Is this possible to do without having to buy a diagnostic machine?
No you need diagnostic machine to reset it
Thank you for the video and I want to ask you if I can do the coding on maxisys ms909 and thank you so much for the amazing videos
Hi if it comes with J2534 then you should be able to do the coding if not then your not able to. Thanks
@@sadiagnostics yes it’s j2534 thank you so much ❤️
@@waheedashram2977 you’re welcome bro
What obd are you using ?
Ms908s pro however I’ve done a video on the latest Autel machine
@@sadiagnostics where u based
Can you reset this without a scanner
No you have to use diagnostic machine…
I change instrument cluster e class now not show millage how to pograming this cluster
U need to programme it to the car otherwise it will not work properly
@@sadiagnostics you can do it with teem viwer
@@morshedshagor8805 I can help
Where can I get hold of you, I have same issue with my Mercedes. Contact details please
You show cable for what use
Your not making sense
Do you need a subscription, i keep receiving the error message cannot connect to server. BT off and connected with usc cable
No you don’t
ho seguito ila procedura tutto ok. grazie
What is your obd tool? Is it possible with Delphi? Or wow?
It’s Autel Maximus ms908s pro and no Delphi and wow will not work
Tnx brother
You’re welcome
My 2017 c300 coupe has so may problems that came up on my messages cluster…first thing my drive assist shows inoperative and after two days my collision assist, low beam, front turn signal left and right and sos is also inoperable and and it shows malfunction and see the manual. I don’t know what’s going on.
Hi did you fix your issue. I have the same problem
Did you fix your issue? I have the same problem