You are simply amazing! I have never seen a channel respond to so many questions from viewers! For this I will subscribe and then like this video…..even though I think you also answered my problem. I hit a raccoon in my 2021 Corolla and so I replaced the front parts myself, bumper grill etc. The VCS came up after starting so I am going to disconnect and reconnect battery. Again you are amazing, Thank You.
@narindersyal8894 After removing the positive and negative cables from the battery, connect the two cables together by touching the positive cable connecter to the negative cable connector for at least 5 minutes. This will clear all codes. then reconnect the cables to the battery, positive first negative last.
@rustyshackleford4876 The forward collision warning system typically relies on sensors located in the front of the vehicle, separate from the lane-keeping assist (LKA) camera/sensor. While removing the LKA camera/sensor might affect other safety features like lane departure warning, it shouldn't directly trigger the forward collision warning light. However, it's best to consult your vehicle's manual or a mechanic for specific information about your car's system.
Mine came on for no reason now has to go to the shop. Hopefully it’s under warranty only has 7.100 miles . It did it like two months ago again no reason went off at that time. Now it will not go off.
@sherrid5315 It's definitely concerning that the collision warning light has come on without any apparent reason, especially since it's happened multiple times. Since your car is relatively new and has low mileage, there's a good chance it could still be under warranty. Taking it to the shop for inspection is the best course of action. They can diagnose the issue and determine if it's covered by the warranty. It's always better to address these warning lights promptly to ensure the safety and proper functioning of your vehicle.
@@Dashboardwarninglights Thank you hope to get answers Tuesday he said may take a hour or two to find the problem. I also have extended warranty. Even If that helps. Weird I just started it up to back out my apartment complex it’s just comes on. All strange to me. Thanks for the reply 😊
@@Dashboardwarninglights it has to go to the dearship Tom. Said it’s under warranty but possibly a mouse! Lmao prove it. Had to be a sensor. I have tried everything to avoid going sadly! Thank you for the video.
I have a 2019 Nissan Rogue SV. The Collision and Lane Assist sensor malfunction started showing all of a sudden. I changed the battery but no luck. Nissan says i need to change the front camera for $2500. Can you please advise?
@deepakskadaba ✅ have you tried the steps that are in the video !!! If your 2019 Nissan Rogue SV is showing a "Collision and Lane Assist sensor malfunction," and replacing the battery didn't resolve the issue, it's concerning that Nissan is suggesting a front camera replacement for $2,500. Here are some steps you can take before committing to such an expensive repair: 👉 1. Get a Second Opinion Before proceeding with the camera replacement, it might be wise to seek a second opinion from another Nissan dealership or a trusted independent mechanic. Sometimes different technicians may have alternative solutions or might find that the problem is not as severe as initially diagnosed. 👉 2. Check for Software Updates Sometimes, sensor malfunctions can be due to outdated software in the vehicle's computer system. Ensure that your vehicle's software is up-to-date. This can be done at a dealership or some specialized auto repair shops. 👉 3. Inspect the Camera and Sensors Ensure that the front camera and sensors are clean and not obstructed by dirt, ice, or debris. Sometimes a thorough cleaning can resolve the issue. Check for any physical damage to the camera or sensors that might be causing the malfunction. 👉 4. Reset the System Disconnect the battery for about 10 minutes and then reconnect it to see if the system resets itself. Sometimes this can clear minor glitches in the system. 👉 5. Scan for Diagnostic Codes Use an OBD-II scanner to pull any specific error codes related to the collision and lane assist systems. This can provide more detailed information about what might be causing the malfunction. Some auto parts stores offer free scanning services, or you can purchase a scanner yourself. 👉 6. Investigate Warranty or Recall Options Check if your vehicle is still under warranty or if there have been any recalls related to the collision and lane assist systems. If the issue is covered, the repair might be done at no cost to you. 👉 7. Consider Aftermarket Repair Options If the camera does need to be replaced, you might explore aftermarket parts or a refurbished camera, which could be more affordable than the $2,500 quoted by Nissan. Just ensure that any aftermarket part is compatible with your vehicle and installed by a professional. 👉 8. Understand the Cost If you do need to replace the camera, ask the dealership to explain why it’s necessary and what the costs include. Sometimes a breakdown of the costs (parts, labor, etc.) might help you negotiate or find a more cost-effective solution. While the malfunction could indeed require a camera replacement, it’s crucial to explore these options first to ensure that the issue is correctly diagnosed and that you’re not overpaying for the repair. ❤ I hope you can fix it quick and that there is nothing more serious. 👉 Happy to help!
I had a recent break job done and might need to change my break oil , your saying it’s possible replacing the oil might be a solution thought that was interesting .
@@omarabdelrahman9775 The Forward Collision Warning (FCW) system is generally unrelated to brake fluid levels or the need for an oil change. However, several issues can trigger the FCW light, and maintenance work might inadvertently affect the system. Here are a few possibilities to consider: 👉 Sensor Obstruction or Misalignment: During a brake job, if the sensors related to the FCW system were accidentally bumped or obstructed, it might trigger the warning light. 👉 Brake System Issues: Although not directly related to FCW, any significant issue with the braking system could potentially affect the overall safety systems in your vehicle, causing warnings to appear. 👉 Electronic or Software Glitch: Sometimes, after maintenance work, there might be temporary glitches in the vehicle’s software, leading to warning lights appearing. 👉 Low Brake Fluid: While this typically triggers a different warning light, it’s always good to ensure your brake fluid is at the correct level and that there are no leaks. 👉 Calibration Needs: After certain types of maintenance, sensors may need recalibration to ensure they’re functioning correctly. If the warning light persists, it would be wise to consult your vehicle's manual for specific troubleshooting steps or take your car to a dealership or a trusted mechanic to diagnose the issue accurately. They can reset the system or determine if there’s a more serious underlying problem.
Thank you for watching! If you’ve found this video helpful and want to support the channel, consider using the ‘Super Thanks’ button. It’s a great way to help me create more content like this!
Honda pilot 2016 collision mitigation system on/off button does not respond on pressure. The alarm says about problem with system. After disconnecting battery situation didn’t change. I’ve tied to find the fuse, but not users manual, not website of Honda didn’t help.
@@maximtihonov2392 @maximtihonov2392 Collision Mitigation Braking System (CMBS) in your 2016 Honda Pilot. Since the on/off button isn’t responding and a system error is being displayed, here's a step-by-step troubleshooting guide: 1. Check the CMBS System Fuse The CMBS system might be malfunctioning due to a blown fuse. Unfortunately, finding the specific fuse might be tricky since the user manual and Honda's website haven’t been helpful, but try checking these locations: 👉 Fuse Box in the Engine Compartment: Look for the main fuse box near the battery. 👉 Interior Fuse Box: Located under the dashboard on the driver's side. Look for the fuses related to safety systems or anything labeled as "CMBS," "Safety," or "Collision." 2. Perform a System Reset Since disconnecting the battery didn’t resolve the issue, you could attempt a system reset: 👉 Hold the CMBS Button: Some systems require you to press and hold the button for 10-30 seconds to reset it. 👉 Cycle the Ignition: Turn the car on and off a few times to see if the system will reset. 3. Check for Software Updates The system might require a software update. Contact a Honda dealership to check for any technical service bulletins (TSBs) related to your issue. Sometimes, malfunctioning CMBS can be linked to outdated software. 4. Inspect Sensors and Cameras Since CMBS relies on sensors (usually near the windshield and front grille), ensure they aren’t blocked or damaged. Clean them if necessary. 5. Diagnostic Scan You may need to use an OBD-II scanner to read any trouble codes related to the CMBS system. This can give more insight into the specific problem. If you continue to face issues after these steps, taking the vehicle to a certified Honda technician might be the best solution, especially if it's an internal module or wiring problem. 🙏 I hope you can fix it quickly and that it's nothing more serious. If you find this video useful, please share it with your friends! ❤ If you have any questions, leave a comment, and we’ll respond.👍 Thanks for watching, and don't forget to subscribe for more! ✅
😊 Thanks for watching don't forget to smash the like button, subscribe and hit the notification bell for future content. ❤ We REALLY hope it helps you drive safely.
Have 3 different warnings lights on my honda jazz after changing shocks and brakes on both front and back tires. Crash collision, lane departure and high beam. What could have caused all 3 😢
@dussarma1 If you're experiencing multiple warning lights on your Honda Jazz after changing the shocks and brakes, it could be due to a few reasons: 👉 ABS Sensors: If the brake work involved disconnecting or disturbing the wheel speed sensors, it could trigger the ABS warning light. Make sure they are reconnected properly. 👉 Wiring Issues: During the shock or brake replacement, wires could have been damaged or disconnected, affecting systems like lane departure and high beam. 👉 Calibration Issues: Some systems, especially those related to safety features like lane departure, may need recalibration after suspension work. 👉 Battery Disconnection: If the battery was disconnected during repairs, it might require a reset for some electronic systems. It's advisable to use an OBD-II scanner to check for any error codes, which can help identify the exact issues. If the problems persist, consider visiting a mechanic for a thorough diagnosis.
@aminejouamaa2578 To fix the forward collision warning light issue, you can try the following steps: 👉 Check the sensors: Make sure the sensors are clean and not obstructed by dirt, snow, or debris. 👉 Reset the system: Some cars allow you to reset the forward collision warning system by following the instructions in the owner's manual. 👉 Inspect for damage: Check if there is any damage to the sensors or the wiring connected to them. Remember, safety systems like forward collision warning are crucial, so it's essential to have them functioning properly.
But the question of the day is: If I replace the front collision warning sensor, will the MALFUNCTION error and light go away? Or do I still have to go to Nissan where they want to charge me $2000 to "calibrate it?"
@@Airtouch67 Replacing the front collision warning sensor might resolve the MALFUNCTION error and light, but it's not guaranteed. The vehicle's system often requires calibration after sensor replacement to ensure accurate functionality. This calibration process typically involves specialized equipment and software that most dealerships possess. Therefore, it's likely you would still need to visit Nissan or a qualified technician to calibrate the sensor properly. This ensures that the system works correctly and safely.
@@Dashboardwarninglights Well I bought my Rogue brand new and honestly it's NEVER worked correctly. So basically it sounds like replacing the sensor is a waste of time. Nissan has this programmed so that you have to take it to them anyway.. $2000.00 for a part that costs $50 bucks on e-bay. Never buying a Nissan again. Lesson learned here. Apparently MILLIONS of Nissan owners get this Malfunction error, and Nissan is doing absolutely nothing to help resolve the issue.
@Foscadamus When the forward collision warning light is on in your 2018 Hyundai Kona and the vehicle is driving very slowly, it's essential to address the issue immediately as it can impact both safety and drivability. Here’s what you should do: ✅ Possible Causes 👉 Sensor Issues: The forward collision system relies on sensors, which can be obstructed, misaligned, or malfunctioning. 👉 System Malfunction: There may be a problem with the forward collision warning system itself, requiring diagnostic checks. 👉 Braking System: The system might be activating the brakes or limiting speed to prevent a perceived collision. 👉 Software Glitch: There could be an issue with the vehicle's software or electronic control unit (ECU). ✅ Immediate Steps 👉 Check for Obstructions: Inspect the front of your car for any obstructions, such as dirt, ice, or debris, that might be blocking the sensors. Clean the sensors and cameras located near the front bumper and windshield. 👉 Restart the Vehicle: Turn off the engine, wait for a few minutes, and then restart the vehicle. This might reset the system temporarily. 👉 Drive Carefully: If the warning light persists, drive cautiously to avoid potential hazards. Keep a safe distance from other vehicles and avoid heavy traffic until the issue is resolved. ✅ Actions to Take 1. Inspect the Sensors: 👉 Check for Physical Damage: Look for any signs of damage or misalignment to the sensors or cameras. 👉 Ensure Cleanliness: Make sure the sensors are clean and unobstructed. 2. Consult the Owner’s Manual: 👉 The owner’s manual might provide specific steps for dealing with a forward collision warning light and could suggest temporary fixes or resets. 3. Professional Diagnosis: 👉 Visit a Mechanic: Schedule a visit to a certified mechanic or Hyundai dealership for a thorough inspection and diagnostic check. They can read the error codes and determine the exact cause of the issue. 👉 Diagnostic Tools: Technicians will use specialized tools to diagnose any problems with the forward collision system, braking system, or electronic control modules. 4. Avoid DIY Fixes: Due to the complexity of modern vehicle safety systems, it’s generally not advisable to attempt fixes on your own without proper diagnostic tools and expertise. ✅ Long-Term Solutions 👉 Software Update: The dealership may update your vehicle's software to address any glitches or bugs in the system. 👉 System Calibration: If the sensors are misaligned, a professional can recalibrate them to ensure they function correctly. 👉 Component Replacement: If there are faulty components, such as a defective sensor or control module, they may need to be replaced. ✅ Safety Tips 👉 Don’t Ignore the Warning: Forward collision systems are crucial for safety. Ignoring the warning light can increase the risk of accidents. 👉 Use Manual Controls: If your vehicle has a manual override for the collision system, use it cautiously and follow the manufacturer’s guidelines. 👉 Avoid Disabling the System: Disabling the forward collision system without resolving the issue can leave you without important safety features. Summary When the forward collision warning light is on and your Hyundai Kona is driving slowly, it’s critical to address the issue promptly by checking for sensor obstructions, restarting the vehicle, and consulting a professional for a thorough diagnostic check. This ensures your vehicle remains safe and functional.
If nothing else is working, try this...strangely it worked (from a forum) "On the morning going to the appointment, the light went off. I got to the service dealer, he hooked up a scanner, it read that my gas cap was defective. He asked if I fill my car up with gas and go and click more than 2 to 3 times after the gas is full. He said that I'm putting to much gas in. Over flow of gas goes into the charcoal filter. Don't over fill the gas tank. So far so good. Hope this helps you out."
@adsmith122 It’s interesting that overfilling the gas tank led to the Forward Collision Warning light appearing. Typically, this light is tied to the vehicle's forward safety system, not the fuel system. However, a malfunctioning gas cap or overfilling could potentially impact various sensors indirectly or create system errors if vapor pressure isn’t controlled correctly. By avoiding "topping off" the tank and securely fastening the gas cap with minimal clicks, you may reduce the chance of unrelated warnings appearing on the dashboard. Thanks for sharing this-it could indeed be helpful for anyone experiencing unexplained warning lights on their dashboard! 🙏👍
@PASHATHELION When the forward collision warning light appears on your dashboard after a windshield replacement, it typically indicates that the forward collision system, which relies on cameras and sensors mounted near the windshield, is malfunctioning or misaligned. Here are some specific steps to address this: 👉 Verify Installation: Confirm that the new windshield is the correct type for your car and that it was installed properly. Some windshields have special coatings or features that are necessary for the proper operation of advanced driver-assistance systems (ADAS). 👉 Software Reset: Sometimes, a simple reset of the car’s computer systems can clear up any warning lights or errors. This can be done by disconnecting the battery for a few minutes and then reconnecting it, but check your car's manual or consult a professional before trying this. 👉 Recalibrate the Sensors/Cameras: After replacing the windshield, the sensors and cameras may need recalibration. This is crucial because the alignment might have been altered during the windshield replacement. You should take your car to a dealership or a professional repair shop that has the equipment to perform the recalibration. 👉 Check for Obstructions: Ensure that there are no obstructions, dirt, or residue on the windshield that might be blocking the sensors or cameras. It's crucial to address this issue promptly to ensure your vehicle's safety features are functioning properly.
@nadianache1888 The loud noise from your 2019 Nissan Note's Forward Collision Warning (FCW) system, particularly when it's raining and in driving mode, could be due to a few factors: 👉 Sensor Interference: Rain or moisture might be interfering with the sensors. The FCW system uses radar or cameras, and if these sensors are obstructed or malfunctioning due to water or dirt, they might trigger unnecessary warnings or noises. 👉 Malfunctioning Sensors: There could be an issue with the sensors themselves, causing them to behave erratically, especially under specific conditions like rain. 👉 Calibration Issue: The sensors might need recalibration. If they aren't aligned properly, they might give false alerts. ✅ What to Do: 👉 Clean the Sensors: Ensure that the sensors, usually located in the front bumper or windshield area, are clean and free of debris. 👉 Check for Software Updates: Visit a Nissan dealership to check if there are any software updates available for the FCW system, as these can sometimes fix bugs or improve sensor accuracy. 👉 Professional Inspection: If cleaning the sensors doesn't resolve the issue, it's best to take the car to a qualified technician or a Nissan service center for a thorough inspection and possible recalibration of the sensors. Driving with malfunctioning sensors could lead to safety issues, so it's important to address this problem promptly. 🙏 I hope you can fix it quickly and that it's nothing more serious. If you find this video useful, please share it with your friends! ❤ If you have any questions, leave a comment, and we’ll respond.👍 Thanks for watching, and don't forget to subscribe for more! ✅
@nassarwali5532 If you've had a minor collision and now the orange collision light is on in your car, here are the steps you should take: 👉 Check for Damage: Inspect your vehicle for any visible damage, both external and internal. Even minor collisions can sometimes cause underlying issues that may not be immediately apparent. 👉 Reset the Light: Sometimes, the collision light can be triggered by the impact itself. Try resetting it by turning off your vehicle, waiting for a minute, and then restarting it. If the light stays on, there may be an ongoing issue that needs attention. 👉 Inspect Sensors and Components: The collision light typically indicates a problem with the collision detection or safety systems in your vehicle. This could involve sensors, airbags, or other safety features that might have been affected by the collision. 👉 Consult the Owner’s Manual: Refer to your vehicle's owner’s manual for specific instructions on what the collision light indicates and what steps you should take. 👉 Visit a Mechanic: If the light persists after attempting to reset it or if you notice any other issues with your vehicle post-collision, it's crucial to take your car to a qualified mechanic or a dealership. They can diagnose any underlying issues, perform necessary repairs, and ensure that your vehicle is safe to drive. 👉 Document the Incident: If you haven't already, document the details of the collision, including any damage to your vehicle and any other vehicles involved. This information may be useful for insurance claims or future reference. Addressing the collision light promptly ensures that any potential safety issues are resolved, and your vehicle remains in proper working condition. Taking these steps can help maintain your safety and the safety of others on the road.
I’m going to try some of these tips out. The system works great for 10 of the first driving minutes but after 15 minutes the light comes on and the automatic braking is disabled
@ecoboostedfuze If the Forward Collision Warning (FCW) light turns on and the system disables after some time of driving, it could indicate a few potential issues: 👉 Sensor Blockage or Malfunction: The FCW system relies on sensors (often located at the front of the vehicle) to detect obstacles. If these sensors become blocked by dirt, debris, or snow, or if they malfunction, the system might initially work but fail as you drive. Checking and cleaning the sensors might resolve the issue. 👉 Overheating Sensors: In some cases, sensors might overheat, especially after prolonged use of the car. This could temporarily impair their function until they cool down. 👉 Electrical Issues: Fluctuations or faults in the vehicle’s electrical system could cause intermittent failures. This might be due to loose connections, aging wiring, or problems with the car’s onboard computer. 👉 Software Glitch: The system's software may have a glitch that causes it to shut down after a certain period of operation. A software update from the dealership could potentially fix this.
@ayazshahid7253 It sounds like the parking sensors and stability systems were either disconnected or improperly reconnected during the bumper replacement. Here’s how to troubleshoot and address the issue: 1. Parking Sensors: 👉 Check Connections: Ensure that the wiring harness for the sensors is properly connected. During bumper replacement, these are often unplugged, and a loose or damaged connection could prevent them from working. 👉 Sensor Alignment: Ensure the sensors are properly aligned and not obstructed. They may have been misaligned or blocked during the bumper installation. 👉 Diagnostic Scan: Use an OBD-II scanner to check for fault codes related to the parking sensors, which can pinpoint the specific issue. 2. Stability Warning Light: 👉 Check Wheel Speed Sensors: These sensors are crucial for stability control. Ensure they weren’t disturbed during the bumper replacement. 👉 Calibration Needed: After replacing parts like the bumper, the stability control system might require recalibration. This usually requires specialized diagnostic tools. 👉 Inspect Wiring: Look for damaged wires, especially if the bumper replacement involved adjustments near the vehicle’s electronics. 3. Anti-Crash Warning Light: 👉 Front Radar/Sensor Alignment: The anti-crash system relies on radar or cameras typically mounted near the bumper. If these were removed or misaligned during the replacement, they could trigger a warning. 👉 Reset System: Some vehicles require a reset or recalibration of the anti-crash system after a bumper replacement. ✅ Steps to Fix: 👉 Visual Inspection: Start by inspecting all wiring and connections for the parking sensors and any front-facing radars or cameras. 👉 Run Diagnostics: Use a diagnostic scanner to identify error codes and perform necessary resets. 👉 Calibration: Take the vehicle to a service center for recalibration of the stability and anti-crash systems. ✅ Step 1: Inspect the Parking Sensors 👉 Check Sensor Connections: Remove the bumper cover (if needed) and inspect the wiring harness for each sensor. Ensure connectors are clean, secure, and free of corrosion. 👉 Clean the Sensors: Dirt or paint overspray from the bumper installation can block the sensors. Clean them with a soft cloth. 👉 Test Each Sensor: With the ignition on (engine off), engage reverse gear. Walk around the bumper, passing your hand in front of each sensor to check for response. If no response, the sensor or wiring may be faulty. ✅ Step 2: Address Stability Warning Light 👉 Inspect Wheel Speed Sensors: These are located near the brake rotors. Ensure no wires or connectors are loose or damaged. Check for debris or grease blocking the sensors. 👉 Recalibrate Stability System: After repairs, recalibration may be needed. Disconnect the battery for about 15 minutes to reset minor faults (be sure to have your radio codes and settings saved first). Alternatively, use the OBD-II scanner to clear stability-related fault codes. ✅ Step 3: Fix the Anti-Crash Warning Light 👉 Inspect the Front Radar or Camera: Check that the radar or camera (often mounted behind the Toyota emblem or near the bumper) is securely attached and aligned. Ensure the lens or radar cover is clean and undamaged. 👉 Recalibrate the System: If the system still displays warnings, you’ll likely need recalibration with a diagnostic tool or at a dealership. ✅ Step 4: Use an OBD-II Scanner 👉 Plug It In: Connect the scanner to your vehicle’s diagnostic port (usually under the dashboard). 👉 Read Codes: Look for specific fault codes related to sensors, stability control, or the anti-crash system. 👉 Clear Codes: After making corrections, clear the fault codes and check if warnings return. ✅ Step 5: Test Drive After completing all checks and clearing codes, take the vehicle for a short drive to ensure the stability and anti-crash systems are functioning correctly.
I have a 2019 His son Leaf. My lane departure light and collision warning light come on together. It's under a warranty with the Main dealer. Twice now I have picked the car up and told multi fault codes have been cleared and it's ok to go.But after driving for around two miles the problem returns. So it's back with them for a third time. I have take photos of the dash, because when you switch off the problem cleares..Getting fed up of being fobbed off now. I asked about a faulty sensor, but was told the sensors are ok...
@GaryRobinson-sm8tz Since the problem persists even after the dealer has supposedly cleared fault codes, it's important to keep pressing them for a proper solution. Your idea about a faulty sensor could still be valid, even if they've told you the sensors are okay. Don't hesitate to ask for a thorough inspection and perhaps even request a second opinion if necessary. Your persistence will hopefully lead to a resolution.
Thanks for your prompt reply..Car has now been sitting at the dealers, for three days and not moved as I have a tracking on it..I have a fourth car but not fit for purpose as I can not get my sites mobility scooter in the boot..I now await a call and see what they have done..
Update.after no contact from the dealer, I went there myself. And then told it's waiting for a part..What part I asked and was told , A forward lane sensor unit , the one in the windscreen.. I was told to expect the part next week..We shall see if it's this what's causing the problem. I still think it's the forward sensor behind the front Nisson badge..as both warning lights come on. And before I took the car to the dealers I had switched off the lane sensor and I still got the collision light on the dash
My brother wanted to reset the code for me by disconnecting the battery. And hook it back up. I would not let him. That would ruin any warranty I have! Even though I trying fight mine. But I think it’s dangerous in rain etc! Who knows! Dealership acted like it would be!
Would disconnecting the fuse and just driving the car cause the fcw malfuntion light to go away? Or will it always be on if i unplug the fuse ? @@Dashboardwarninglights
@@killertofu Disconnecting the fuse will not make the FCW malfunction light go away. In fact, it will likely cause the light to stay on or trigger additional warnings. The vehicle's onboard computer will detect the loss of power to the FCW system and register it as a fault, keeping the warning light illuminated. To resolve the issue properly, you should change the fuse if it is faulty.
@Dashboardwarninglights the problem is my sensor is broke. I need to replace but I can't find he part anywhere or what it looks like. Do you by chance have a link to show what it looks like and where it's located on the car so I can buy a replacement
i started getting FCW failure after trying to install a hardwire kit to a camera from fuses underneathe the dash and now the car wont reverse drive..i cant een get into vehicle settings on my screen to disable this....2015 honda accord..Car Gods plz have mercy
@thebrokeway9838 The FCW (Forward Collision Warning) failure and your car not being able to reverse or drive are likely related to the hardwire kit installation. Improper wiring or tapping into the wrong fuse can disrupt the vehicle’s electrical system, causing system failures. Here's how you can troubleshoot and potentially fix the issue: 👉 Step 1: Disconnect the Hardwire Kit Turn Off the Car: Ensure the vehicle is completely turned off. Remove the Hardwire Kit: Uninstall the hardwire kit and undo any wiring connections to the fuses. Inspect the Fuses: Check for blown fuses caused by the installation. Replace any damaged fuses with the correct amp rating. 👉 Step 2: Reset the Vehicle's Electrical System Disconnect the Battery: Disconnect the negative terminal of the car's 12V battery for 10-15 minutes. This allows the car’s systems to reset. Reconnect the Battery: Reattach the negative terminal and turn the car back on to see if the error clears. 👉 Step 3: Check the FCW and Other Systems Cycle Through Gears: Turn on the ignition and try shifting through all gears (P, R, N, D). This might reset the transmission system if it's electronically controlled. Check for Warning Lights: If the FCW failure persists, note any other warning lights that appear, as they might be related. 👉 Step 4: Scan for Diagnostic Trouble Codes (DTCs) Use an OBD-II Scanner: Plug in an OBD-II scanner to check for any error codes stored in the ECU (Electronic Control Unit). Focus on codes related to the transmission, FCW system, and other electronic modules. Clear Codes: If no critical faults are found, clear the codes and restart the car to see if the issue resolves. 👉 Step 5: Revisit Hardwiring Installation Fuse Tap Inspection: Double-check that you tapped into a fuse that is not critical to the vehicle's safety systems (e.g., airbag, FCW, or ECU fuses). Use an accessory fuse (usually marked ACC or cigarette lighter). Voltage Check: Ensure your camera hardwire kit is not back-feeding power into sensitive systems. 👉 Step 6: Professional Help If the problem persists: Visit a Mechanic or Dealership: They can diagnose and repair any damage caused during the hardwire installation. Explain the Issue: Mention the hardwiring attempt to help them pinpoint the source of the problem quickly. ✅ Preventative Advice When installing a hardwire kit, always use a fuse tap designed for the purpose, and confirm the compatibility of the circuit you're tapping into. Consult the vehicle’s wiring diagram to avoid interfering with critical systems. If you're lucky, resetting the system and replacing blown fuses should get your Honda Accord back to normal. Good luck!
@Dashboardwarninglights thank you very much, I backtracked as advised and it came down to the fuses not being in the correct slot..it had the #8 MISS SOL 10a fuse being put into one of the slots that was not suppose to have a fuse in it and no fuse at all in its slot. Thank you very much Sir!! It's so hard to believe that a tiny 10a fuse can cause such a gigantic problem like that..the mechanic was trying to charge $1050 for reset and a modular or modulator replacement or some mechanic jargon after he just ran a OBD a couple times, the thing looked like it was made by playskool I shit you not..I believe he had already knew what was wrong but he wanted to make it sound like it was serious to get my money..I really appreciate you...take care and ✌
@thebrokeway9838 I'm glad you were able to figure it out and avoid unnecessary expenses. Some mechanics, unfortunately, do try to upsell repairs, but your persistence saved the day. It's a great reminder to always double-check the basics before agreeing to costly fixes. I’m really happy I could help-take care, and safe driving! Don’t forget to subscribe and like for more tips and solutions!
@sxythe1734 If your BMW is displaying a notification that the Collision Warning System is deactivated after a few minutes of running, it could be due to several reasons. Here are some steps to diagnose and possibly fix the issue: 👉 Check for Obstructions: Ensure that the sensors and cameras related to the collision warning system are clean and unobstructed. Dirt, snow, or debris can block the sensors, leading to deactivation. 👉 Battery Voltage: Low battery voltage can cause various systems in your car to malfunction. Have your battery checked to ensure it is in good condition and properly charged. 👉 Software Update: Sometimes, a software update can resolve issues related to the car’s electronic systems. Check if there are any updates available for your car’s software and have them installed by a professional. 👉 System Reset: Try resetting the collision warning system. This can sometimes be done through the vehicle’s settings menu or by disconnecting the car battery for a few minutes (ensure you know your radio and other electronic settings before doing this, as they may be reset). 👉 Check for Recalls or Service Bulletins: Occasionally, manufacturers issue recalls or service bulletins for known issues. Check with your BMW dealer to see if there are any such notices for your vehicle. Addressing the issue promptly is important for ensuring your safety and the proper functioning of your vehicle’s safety systems.
@jonitaite6800 Forward sensors are typically located at the front of a vehicle or machine and include various technologies such as radar, lidar, ultrasonic, and cameras. They are usually positioned in strategic locations like: Front Bumper: Common placement for radar and ultrasonic sensors for detecting obstacles and assisting in parking. Grille: Often houses radar sensors to aid in adaptive cruise control and collision avoidance. Windshield: Camera sensors for lane-keeping assistance, traffic sign recognition, and forward collision warning. Side Mirrors: Can contain cameras or sensors to cover blind spots and provide additional forward-looking coverage. Front Fenders: Sometimes used for side-facing sensors that still have a forward-looking component for detecting cross-traffic. These placements ensure that the sensors can effectively monitor the area in front of the vehicle or equipment to enhance safety and operational efficiency.
@connerthomas3840 don't worry about the "blinker fluid"-that’s a bit of a joke! Cars don’t actually have blinker fluid; it's a humorous term sometimes used in automotive circles. If you’re experiencing warning lights, here are some real things to check: Forward Collision Warning System: This light can come on if there's an issue with the sensors, possibly caused by dirt or obstructions on the front of the car. Give the sensors a gentle clean and see if the light resets.
@user-ck5kp9dn3k I talked about this video in Steps Since you cleaned the camera and the light is no longer on, it suggests that the system is back to normal operation 👍
@orbiteflow8909 your vehicle’s Forward Collision Mitigation (FCM) radar system is disabled, likely due to damage or misalignment. This can happen if the radar sensor (often located behind the front grille or bumper) is exposed to impacts, dirt, or harsh weather conditions. 👉 Clean the Radar Sensor: Check the front bumper or grille for dirt, debris, or snow obstructing the sensor. Clean it gently with a microfiber cloth. 👉 Check for Damage: Inspect the sensor and its mounting area for cracks, misalignment, or damage. 👉 Reset the System: Turn the car off, wait a few minutes, and restart it. This may clear minor glitches. 👉 Calibrate the Radar: If misaligned, the sensor might need recalibration. This requires specialized equipment at a dealership or repair shop. 👉 Inspect Wiring and Connections: Look for loose or damaged wiring near the radar unit. If the issue persists, visit a professional technician or dealership. They can run diagnostics and recalibrate or replace the sensor if necessary. 📍 I hope you can fix it quick and that there is nothing more serious.
How to Fix & Reset Immobilizer System Warning Light Stays On? Car With Lock Symbol Light Meaning
th-cam.com/video/57heRbmwaqo/w-d-xo.html
You are simply amazing! I have never seen a channel respond to so many questions from viewers! For this I will subscribe and then like this video…..even though I think you also answered my problem. I hit a raccoon in my 2021 Corolla and so I replaced the front parts myself, bumper grill etc. The VCS came up after starting so I am going to disconnect and reconnect battery. Again you are amazing, Thank You.
@eggbert1978
👉 No problem. I hope you can fix it quick and that there is nothing more serious.
👉 Happy to help!
Excellent video thank you
Thanks for the video. Great job
I got i20 hunda I car and there forward collision warning sign on how to get rid from that
@narindersyal8894
Have you tried the methods of the video !!
@narindersyal8894
After removing the positive and negative cables from the battery, connect the two cables together by touching the positive cable connecter to the negative cable connector for at least 5 minutes. This will clear all codes. then reconnect the cables to the battery, positive first negative last.
It is dangerous to take off?
Would this be activated if you LKA camera/sensor was stolen or removed?
@rustyshackleford4876
The forward collision warning system typically relies on sensors located in the front of the vehicle, separate from the lane-keeping assist (LKA) camera/sensor. While removing the LKA camera/sensor might affect other safety features like lane departure warning, it shouldn't directly trigger the forward collision warning light. However, it's best to consult your vehicle's manual or a mechanic for specific information about your car's system.
Mine came on for no reason now has to go to the shop. Hopefully it’s under warranty only has 7.100 miles . It did it like two months ago again no reason went off at that time. Now it will not go off.
@sherrid5315
It's definitely concerning that the collision warning light has come on without any apparent reason, especially since it's happened multiple times. Since your car is relatively new and has low mileage, there's a good chance it could still be under warranty. Taking it to the shop for inspection is the best course of action. They can diagnose the issue and determine if it's covered by the warranty. It's always better to address these warning lights promptly to ensure the safety and proper functioning of your vehicle.
@@Dashboardwarninglights Thank you hope to get answers Tuesday he said may take a hour or two to find the problem. I also have extended warranty. Even If that helps. Weird I just started it up to back out my apartment complex it’s just comes on. All strange to me. Thanks for the reply 😊
Hope it is helpful for you.
You're very welcome.
@@Dashboardwarninglights it has to go to the dearship Tom. Said it’s under warranty but possibly a mouse! Lmao prove it. Had to be a sensor. I have tried everything to avoid going sadly! Thank you for the video.
🙏
I have a 2019 Nissan Rogue SV. The Collision and Lane Assist sensor malfunction started showing all of a sudden. I changed the battery but no luck. Nissan says i need to change the front camera for $2500. Can you please advise?
@deepakskadaba
✅ have you tried the steps that are in the video !!!
If your 2019 Nissan Rogue SV is showing a "Collision and Lane Assist sensor malfunction," and replacing the battery didn't resolve the issue, it's concerning that Nissan is suggesting a front camera replacement for $2,500. Here are some steps you can take before committing to such an expensive repair:
👉 1. Get a Second Opinion
Before proceeding with the camera replacement, it might be wise to seek a second opinion from another Nissan dealership or a trusted independent mechanic. Sometimes different technicians may have alternative solutions or might find that the problem is not as severe as initially diagnosed.
👉 2. Check for Software Updates
Sometimes, sensor malfunctions can be due to outdated software in the vehicle's computer system. Ensure that your vehicle's software is up-to-date. This can be done at a dealership or some specialized auto repair shops.
👉 3. Inspect the Camera and Sensors
Ensure that the front camera and sensors are clean and not obstructed by dirt, ice, or debris. Sometimes a thorough cleaning can resolve the issue.
Check for any physical damage to the camera or sensors that might be causing the malfunction.
👉 4. Reset the System
Disconnect the battery for about 10 minutes and then reconnect it to see if the system resets itself. Sometimes this can clear minor glitches in the system.
👉 5. Scan for Diagnostic Codes
Use an OBD-II scanner to pull any specific error codes related to the collision and lane assist systems. This can provide more detailed information about what might be causing the malfunction. Some auto parts stores offer free scanning services, or you can purchase a scanner yourself.
👉 6. Investigate Warranty or Recall Options
Check if your vehicle is still under warranty or if there have been any recalls related to the collision and lane assist systems. If the issue is covered, the repair might be done at no cost to you.
👉 7. Consider Aftermarket Repair Options
If the camera does need to be replaced, you might explore aftermarket parts or a refurbished camera, which could be more affordable than the $2,500 quoted by Nissan. Just ensure that any aftermarket part is compatible with your vehicle and installed by a professional.
👉 8. Understand the Cost
If you do need to replace the camera, ask the dealership to explain why it’s necessary and what the costs include. Sometimes a breakdown of the costs (parts, labor, etc.) might help you negotiate or find a more cost-effective solution.
While the malfunction could indeed require a camera replacement, it’s crucial to explore these options first to ensure that the issue is correctly diagnosed and that you’re not overpaying for the repair.
❤ I hope you can fix it quick and that there is nothing more serious.
👉 Happy to help!
I had a recent break job done and might need to change my break oil , your saying it’s possible replacing the oil might be a solution thought that was interesting .
@@omarabdelrahman9775 The Forward Collision Warning (FCW) system is generally unrelated to brake fluid levels or the need for an oil change. However, several issues can trigger the FCW light, and maintenance work might inadvertently affect the system. Here are a few possibilities to consider:
👉 Sensor Obstruction or Misalignment: During a brake job, if the sensors related to the FCW system were accidentally bumped or obstructed, it might trigger the warning light.
👉 Brake System Issues: Although not directly related to FCW, any significant issue with the braking system could potentially affect the overall safety systems in your vehicle, causing warnings to appear.
👉 Electronic or Software Glitch: Sometimes, after maintenance work, there might be temporary glitches in the vehicle’s software, leading to warning lights appearing.
👉 Low Brake Fluid: While this typically triggers a different warning light, it’s always good to ensure your brake fluid is at the correct level and that there are no leaks.
👉 Calibration Needs: After certain types of maintenance, sensors may need recalibration to ensure they’re functioning correctly.
If the warning light persists, it would be wise to consult your vehicle's manual for specific troubleshooting steps or take your car to a dealership or a trusted mechanic to diagnose the issue accurately. They can reset the system or determine if there’s a more serious underlying problem.
Thank you for watching! If you’ve found this video helpful and want to support the channel, consider using the ‘Super Thanks’ button. It’s a great way to help me create more content like this!
Honda pilot 2016 collision mitigation system on/off button does not respond on pressure. The alarm says about problem with system. After disconnecting battery situation didn’t change. I’ve tied to find the fuse, but not users manual, not website of Honda didn’t help.
@@maximtihonov2392 @maximtihonov2392 Collision Mitigation Braking System (CMBS) in your 2016 Honda Pilot. Since the on/off button isn’t responding and a system error is being displayed, here's a step-by-step troubleshooting guide:
1. Check the CMBS System Fuse
The CMBS system might be malfunctioning due to a blown fuse. Unfortunately, finding the specific fuse might be tricky since the user manual and Honda's website haven’t been helpful, but try checking these locations:
👉 Fuse Box in the Engine Compartment: Look for the main fuse box near the battery.
👉 Interior Fuse Box: Located under the dashboard on the driver's side.
Look for the fuses related to safety systems or anything labeled as "CMBS," "Safety," or "Collision."
2. Perform a System Reset
Since disconnecting the battery didn’t resolve the issue, you could attempt a system reset:
👉 Hold the CMBS Button: Some systems require you to press and hold the button for 10-30 seconds to reset it.
👉 Cycle the Ignition: Turn the car on and off a few times to see if the system will reset.
3. Check for Software Updates
The system might require a software update. Contact a Honda dealership to check for any technical service bulletins (TSBs) related to your issue. Sometimes, malfunctioning CMBS can be linked to outdated software.
4. Inspect Sensors and Cameras
Since CMBS relies on sensors (usually near the windshield and front grille), ensure they aren’t blocked or damaged. Clean them if necessary.
5. Diagnostic Scan
You may need to use an OBD-II scanner to read any trouble codes related to the CMBS system. This can give more insight into the specific problem.
If you continue to face issues after these steps, taking the vehicle to a certified Honda technician might be the best solution, especially if it's an internal module or wiring problem.
🙏 I hope you can fix it quickly and that it's nothing more serious.
If you find this video useful, please share it with your friends! ❤
If you have any questions, leave a comment, and we’ll respond.👍
Thanks for watching, and don't forget to subscribe for more! ✅
😊 Thanks for watching don't forget to smash the like button, subscribe and hit the notification bell for future content.
❤ We REALLY hope it helps you drive safely.
Have 3 different warnings lights on my honda jazz after changing shocks and brakes on both front and back tires. Crash collision, lane departure and high beam. What could have caused all 3 😢
@dussarma1 If you're experiencing multiple warning lights on your Honda Jazz after changing the shocks and brakes, it could be due to a few reasons:
👉 ABS Sensors: If the brake work involved disconnecting or disturbing the wheel speed sensors, it could trigger the ABS warning light. Make sure they are reconnected properly.
👉 Wiring Issues: During the shock or brake replacement, wires could have been damaged or disconnected, affecting systems like lane departure and high beam.
👉 Calibration Issues: Some systems, especially those related to safety features like lane departure, may need recalibration after suspension work.
👉 Battery Disconnection: If the battery was disconnected during repairs, it might require a reset for some electronic systems.
It's advisable to use an OBD-II scanner to check for any error codes, which can help identify the exact issues. If the problems persist, consider visiting a mechanic for a thorough diagnosis.
@@Dashboardwarninglights Thank you for time and advise. Will check all your suggestions 😊
I have this probleme i try to turn off first in tableau but when i start car it came again what is the solution
@aminejouamaa2578 To fix the forward collision warning light issue, you can try the following steps:
👉 Check the sensors: Make sure the sensors are clean and not obstructed by dirt, snow, or debris.
👉 Reset the system: Some cars allow you to reset the forward collision warning system by following the instructions in the owner's manual.
👉 Inspect for damage: Check if there is any damage to the sensors or the wiring connected to them.
Remember, safety systems like forward collision warning are crucial, so it's essential to have them functioning properly.
But the question of the day is: If I replace the front collision warning sensor, will the MALFUNCTION error and light go away? Or do I still have to go to Nissan where they want to charge me $2000 to "calibrate it?"
@@Airtouch67 Replacing the front collision warning sensor might resolve the MALFUNCTION error and light, but it's not guaranteed. The vehicle's system often requires calibration after sensor replacement to ensure accurate functionality. This calibration process typically involves specialized equipment and software that most dealerships possess. Therefore, it's likely you would still need to visit Nissan or a qualified technician to calibrate the sensor properly. This ensures that the system works correctly and safely.
@@Dashboardwarninglights Well I bought my Rogue brand new and honestly it's NEVER worked correctly. So basically it sounds like replacing the sensor is a waste of time. Nissan has this programmed so that you have to take it to them anyway.. $2000.00 for a part that costs $50 bucks on e-bay. Never buying a Nissan again. Lesson learned here. Apparently MILLIONS of Nissan owners get this Malfunction error, and Nissan is doing absolutely nothing to help resolve the issue.
My 2018 kona has this issue and it drives very slowly! Help me
@Foscadamus
When the forward collision warning light is on in your 2018 Hyundai Kona and the vehicle is driving very slowly, it's essential to address the issue immediately as it can impact both safety and drivability. Here’s what you should do:
✅ Possible Causes
👉 Sensor Issues: The forward collision system relies on sensors, which can be obstructed, misaligned, or malfunctioning.
👉 System Malfunction: There may be a problem with the forward collision warning system itself, requiring diagnostic checks.
👉 Braking System: The system might be activating the brakes or limiting speed to prevent a perceived collision.
👉 Software Glitch: There could be an issue with the vehicle's software or electronic control unit (ECU).
✅ Immediate Steps
👉 Check for Obstructions: Inspect the front of your car for any obstructions, such as dirt, ice, or debris, that might be blocking the sensors. Clean the sensors and cameras located near the front bumper and windshield.
👉 Restart the Vehicle: Turn off the engine, wait for a few minutes, and then restart the vehicle. This might reset the system temporarily.
👉 Drive Carefully: If the warning light persists, drive cautiously to avoid potential hazards. Keep a safe distance from other vehicles and avoid heavy traffic until the issue is resolved.
✅ Actions to Take
1. Inspect the Sensors:
👉 Check for Physical Damage: Look for any signs of damage or misalignment to the sensors or cameras.
👉 Ensure Cleanliness: Make sure the sensors are clean and unobstructed.
2. Consult the Owner’s Manual:
👉 The owner’s manual might provide specific steps for dealing with a forward collision warning light and could suggest temporary fixes or resets.
3. Professional Diagnosis:
👉 Visit a Mechanic: Schedule a visit to a certified mechanic or Hyundai dealership for a thorough inspection and diagnostic check. They can read the error codes and determine the exact cause of the issue.
👉 Diagnostic Tools: Technicians will use specialized tools to diagnose any problems with the forward collision system, braking system, or electronic control modules.
4. Avoid DIY Fixes: Due to the complexity of modern vehicle safety systems, it’s generally not advisable to attempt fixes on your own without proper diagnostic tools and expertise.
✅ Long-Term Solutions
👉 Software Update: The dealership may update your vehicle's software to address any glitches or bugs in the system.
👉 System Calibration: If the sensors are misaligned, a professional can recalibrate them to ensure they function correctly.
👉 Component Replacement: If there are faulty components, such as a defective sensor or control module, they may need to be replaced.
✅ Safety Tips
👉 Don’t Ignore the Warning: Forward collision systems are crucial for safety. Ignoring the warning light can increase the risk of accidents.
👉 Use Manual Controls: If your vehicle has a manual override for the collision system, use it cautiously and follow the manufacturer’s guidelines.
👉 Avoid Disabling the System: Disabling the forward collision system without resolving the issue can leave you without important safety features.
Summary
When the forward collision warning light is on and your Hyundai Kona is driving slowly, it’s critical to address the issue promptly by checking for sensor obstructions, restarting the vehicle, and consulting a professional for a thorough diagnostic check. This ensures your vehicle remains safe and functional.
If nothing else is working, try this...strangely it worked (from a forum) "On the morning going to the appointment, the light went off. I got to the service dealer, he hooked up a scanner, it read that my gas cap was defective. He asked if I fill my car up with gas and go and click more than 2 to 3 times after the gas is full. He said that I'm putting to much gas in. Over flow of gas goes into the charcoal filter. Don't over fill the gas tank. So far so good. Hope this helps you out."
@adsmith122 It’s interesting that overfilling the gas tank led to the Forward Collision Warning light appearing. Typically, this light is tied to the vehicle's forward safety system, not the fuel system. However, a malfunctioning gas cap or overfilling could potentially impact various sensors indirectly or create system errors if vapor pressure isn’t controlled correctly.
By avoiding "topping off" the tank and securely fastening the gas cap with minimal clicks, you may reduce the chance of unrelated warnings appearing on the dashboard. Thanks for sharing this-it could indeed be helpful for anyone experiencing unexplained warning lights on their dashboard!
🙏👍
I changed my windshield and then after this sign appears , any suggestion plz
@PASHATHELION
When the forward collision warning light appears on your dashboard after a windshield replacement, it typically indicates that the forward collision system, which relies on cameras and sensors mounted near the windshield, is malfunctioning or misaligned. Here are some specific steps to address this:
👉 Verify Installation: Confirm that the new windshield is the correct type for your car and that it was installed properly. Some windshields have special coatings or features that are necessary for the proper operation of advanced driver-assistance systems (ADAS).
👉 Software Reset: Sometimes, a simple reset of the car’s computer systems can clear up any warning lights or errors. This can be done by disconnecting the battery for a few minutes and then reconnecting it, but check your car's manual or consult a professional before trying this.
👉 Recalibrate the Sensors/Cameras: After replacing the windshield, the sensors and cameras may need recalibration. This is crucial because the alignment might have been altered during the windshield replacement. You should take your car to a dealership or a professional repair shop that has the equipment to perform the recalibration.
👉 Check for Obstructions: Ensure that there are no obstructions, dirt, or residue on the windshield that might be blocking the sensors or cameras.
It's crucial to address this issue promptly to ensure your vehicle's safety features are functioning properly.
@@Dashboardwarninglights thanks
My 2019 nissan note has this fault on and is making a loud noise, especially when raining and is in driving mode . As soon as I start driving stops
@nadianache1888 The loud noise from your 2019 Nissan Note's Forward Collision Warning (FCW) system, particularly when it's raining and in driving mode, could be due to a few factors:
👉 Sensor Interference: Rain or moisture might be interfering with the sensors. The FCW system uses radar or cameras, and if these sensors are obstructed or malfunctioning due to water or dirt, they might trigger unnecessary warnings or noises.
👉 Malfunctioning Sensors: There could be an issue with the sensors themselves, causing them to behave erratically, especially under specific conditions like rain.
👉 Calibration Issue: The sensors might need recalibration. If they aren't aligned properly, they might give false alerts.
✅ What to Do:
👉 Clean the Sensors: Ensure that the sensors, usually located in the front bumper or windshield area, are clean and free of debris.
👉 Check for Software Updates: Visit a Nissan dealership to check if there are any software updates available for the FCW system, as these can sometimes fix bugs or improve sensor accuracy.
👉 Professional Inspection: If cleaning the sensors doesn't resolve the issue, it's best to take the car to a qualified technician or a Nissan service center for a thorough inspection and possible recalibration of the sensors.
Driving with malfunctioning sensors could lead to safety issues, so it's important to address this problem promptly.
🙏 I hope you can fix it quickly and that it's nothing more serious.
If you find this video useful, please share it with your friends! ❤
If you have any questions, leave a comment, and we’ll respond.👍
Thanks for watching, and don't forget to subscribe for more! ✅
I had a minor collision now the orange collision light is on. What do I need to do
@nassarwali5532 If you've had a minor collision and now the orange collision light is on in your car, here are the steps you should take:
👉 Check for Damage: Inspect your vehicle for any visible damage, both external and internal. Even minor collisions can sometimes cause underlying issues that may not be immediately apparent.
👉 Reset the Light: Sometimes, the collision light can be triggered by the impact itself. Try resetting it by turning off your vehicle, waiting for a minute, and then restarting it. If the light stays on, there may be an ongoing issue that needs attention.
👉 Inspect Sensors and Components: The collision light typically indicates a problem with the collision detection or safety systems in your vehicle. This could involve sensors, airbags, or other safety features that might have been affected by the collision.
👉 Consult the Owner’s Manual: Refer to your vehicle's owner’s manual for specific instructions on what the collision light indicates and what steps you should take.
👉 Visit a Mechanic: If the light persists after attempting to reset it or if you notice any other issues with your vehicle post-collision, it's crucial to take your car to a qualified mechanic or a dealership. They can diagnose any underlying issues, perform necessary repairs, and ensure that your vehicle is safe to drive.
👉 Document the Incident: If you haven't already, document the details of the collision, including any damage to your vehicle and any other vehicles involved. This information may be useful for insurance claims or future reference.
Addressing the collision light promptly ensures that any potential safety issues are resolved, and your vehicle remains in proper working condition. Taking these steps can help maintain your safety and the safety of others on the road.
I’m going to try some of these tips out. The system works great for 10 of the first driving minutes but after 15 minutes the light comes on and the automatic braking is disabled
@ecoboostedfuze
If the Forward Collision Warning (FCW) light turns on and the system disables after some time of driving, it could indicate a few potential issues:
👉 Sensor Blockage or Malfunction: The FCW system relies on sensors (often located at the front of the vehicle) to detect obstacles. If these sensors become blocked by dirt, debris, or snow, or if they malfunction, the system might initially work but fail as you drive. Checking and cleaning the sensors might resolve the issue.
👉 Overheating Sensors: In some cases, sensors might overheat, especially after prolonged use of the car. This could temporarily impair their function until they cool down.
👉 Electrical Issues: Fluctuations or faults in the vehicle’s electrical system could cause intermittent failures. This might be due to loose connections, aging wiring, or problems with the car’s onboard computer.
👉 Software Glitch: The system's software may have a glitch that causes it to shut down after a certain period of operation. A software update from the dealership could potentially fix this.
I changed the bumper on my prado 150;
So now the parking sensors are not working
Also the stability warning light and anti crash warning light is on
@ayazshahid7253 It sounds like the parking sensors and stability systems were either disconnected or improperly reconnected during the bumper replacement. Here’s how to troubleshoot and address the issue:
1. Parking Sensors:
👉 Check Connections: Ensure that the wiring harness for the sensors is properly connected. During bumper replacement, these are often unplugged, and a loose or damaged connection could prevent them from working.
👉 Sensor Alignment: Ensure the sensors are properly aligned and not obstructed. They may have been misaligned or blocked during the bumper installation.
👉 Diagnostic Scan: Use an OBD-II scanner to check for fault codes related to the parking sensors, which can pinpoint the specific issue.
2. Stability Warning Light:
👉 Check Wheel Speed Sensors: These sensors are crucial for stability control. Ensure they weren’t disturbed during the bumper replacement.
👉 Calibration Needed: After replacing parts like the bumper, the stability control system might require recalibration. This usually requires specialized diagnostic tools.
👉 Inspect Wiring: Look for damaged wires, especially if the bumper replacement involved adjustments near the vehicle’s electronics.
3. Anti-Crash Warning Light:
👉 Front Radar/Sensor Alignment: The anti-crash system relies on radar or cameras typically mounted near the bumper. If these were removed or misaligned during the replacement, they could trigger a warning.
👉 Reset System: Some vehicles require a reset or recalibration of the anti-crash system after a bumper replacement.
✅ Steps to Fix:
👉 Visual Inspection: Start by inspecting all wiring and connections for the parking sensors and any front-facing radars or cameras.
👉 Run Diagnostics: Use a diagnostic scanner to identify error codes and perform necessary resets.
👉 Calibration: Take the vehicle to a service center for recalibration of the stability and anti-crash systems.
✅ Step 1: Inspect the Parking Sensors
👉 Check Sensor Connections:
Remove the bumper cover (if needed) and inspect the wiring harness for each sensor.
Ensure connectors are clean, secure, and free of corrosion.
👉 Clean the Sensors: Dirt or paint overspray from the bumper installation can block the sensors. Clean them with a soft cloth.
👉 Test Each Sensor:
With the ignition on (engine off), engage reverse gear. Walk around the bumper, passing your hand in front of each sensor to check for response.
If no response, the sensor or wiring may be faulty.
✅ Step 2: Address Stability Warning Light
👉 Inspect Wheel Speed Sensors:
These are located near the brake rotors. Ensure no wires or connectors are loose or damaged.
Check for debris or grease blocking the sensors.
👉 Recalibrate Stability System:
After repairs, recalibration may be needed.
Disconnect the battery for about 15 minutes to reset minor faults (be sure to have your radio codes and settings saved first).
Alternatively, use the OBD-II scanner to clear stability-related fault codes.
✅ Step 3: Fix the Anti-Crash Warning Light
👉 Inspect the Front Radar or Camera:
Check that the radar or camera (often mounted behind the Toyota emblem or near the bumper) is securely attached and aligned.
Ensure the lens or radar cover is clean and undamaged.
👉 Recalibrate the System:
If the system still displays warnings, you’ll likely need recalibration with a diagnostic tool or at a dealership.
✅ Step 4: Use an OBD-II Scanner
👉 Plug It In: Connect the scanner to your vehicle’s diagnostic port (usually under the dashboard).
👉 Read Codes: Look for specific fault codes related to sensors, stability control, or the anti-crash system.
👉 Clear Codes: After making corrections, clear the fault codes and check if warnings return.
✅ Step 5: Test Drive
After completing all checks and clearing codes, take the vehicle for a short drive to ensure the stability and anti-crash systems are functioning correctly.
I have a 2019 His son Leaf.
My lane departure light and collision warning light come on together.
It's under a warranty with the Main dealer. Twice now I have picked the car up and told multi fault codes have been cleared and it's ok to go.But after driving for around two miles the problem returns.
So it's back with them for a third time. I have take photos of the dash, because when you switch off the problem cleares..Getting fed up of being fobbed off now.
I asked about a faulty sensor, but was told the sensors are ok...
@GaryRobinson-sm8tz Since the problem persists even after the dealer has supposedly cleared fault codes, it's important to keep pressing them for a proper solution. Your idea about a faulty sensor could still be valid, even if they've told you the sensors are okay. Don't hesitate to ask for a thorough inspection and perhaps even request a second opinion if necessary. Your persistence will hopefully lead to a resolution.
Thanks for your prompt reply..Car has now been sitting at the dealers, for three days and not moved as I have a tracking on it..I have a fourth car but not fit for purpose as I can not get my sites mobility scooter in the boot..I now await a call and see what they have done..
That's ment to read a Hired car.
Update.after no contact from the dealer, I went there myself. And then told it's waiting for a part..What part I asked and was told , A forward lane sensor unit , the one in the windscreen.. I was told to expect the part next week..We shall see if it's this what's causing the problem. I still think it's the forward sensor behind the front Nisson badge..as both warning lights come on. And before I took the car to the dealers I had switched off the lane sensor and I still got the collision light on the dash
We wait ...
Can i just discconnect the fuse and not use it ?
My brother wanted to reset the code for me by disconnecting the battery. And hook it back up. I would not let him. That would ruin any warranty I have! Even though I trying fight mine. But I think it’s dangerous in rain etc! Who knows! Dealership acted like it would be!
@sherrid5315 Right
Would disconnecting the fuse and just driving the car cause the fcw malfuntion light to go away? Or will it always be on if i unplug the fuse ? @@Dashboardwarninglights
@@killertofu Disconnecting the fuse will not make the FCW malfunction light go away. In fact, it will likely cause the light to stay on or trigger additional warnings. The vehicle's onboard computer will detect the loss of power to the FCW system and register it as a fault, keeping the warning light illuminated. To resolve the issue properly, you should change the fuse if it is faulty.
@Dashboardwarninglights the problem is my sensor is broke. I need to replace but I can't find he part anywhere or what it looks like. Do you by chance have a link to show what it looks like and where it's located on the car so I can buy a replacement
i started getting FCW failure after trying to install a hardwire kit to a camera from fuses underneathe the dash and now the car wont reverse drive..i cant een get into vehicle settings on my screen to disable this....2015 honda accord..Car Gods plz have mercy
@thebrokeway9838 The FCW (Forward Collision Warning) failure and your car not being able to reverse or drive are likely related to the hardwire kit installation. Improper wiring or tapping into the wrong fuse can disrupt the vehicle’s electrical system, causing system failures. Here's how you can troubleshoot and potentially fix the issue:
👉 Step 1: Disconnect the Hardwire Kit
Turn Off the Car: Ensure the vehicle is completely turned off.
Remove the Hardwire Kit: Uninstall the hardwire kit and undo any wiring connections to the fuses.
Inspect the Fuses: Check for blown fuses caused by the installation. Replace any damaged fuses with the correct amp rating.
👉 Step 2: Reset the Vehicle's Electrical System
Disconnect the Battery:
Disconnect the negative terminal of the car's 12V battery for 10-15 minutes.
This allows the car’s systems to reset.
Reconnect the Battery: Reattach the negative terminal and turn the car back on to see if the error clears.
👉 Step 3: Check the FCW and Other Systems
Cycle Through Gears:
Turn on the ignition and try shifting through all gears (P, R, N, D).
This might reset the transmission system if it's electronically controlled.
Check for Warning Lights:
If the FCW failure persists, note any other warning lights that appear, as they might be related.
👉 Step 4: Scan for Diagnostic Trouble Codes (DTCs)
Use an OBD-II Scanner:
Plug in an OBD-II scanner to check for any error codes stored in the ECU (Electronic Control Unit).
Focus on codes related to the transmission, FCW system, and other electronic modules.
Clear Codes:
If no critical faults are found, clear the codes and restart the car to see if the issue resolves.
👉 Step 5: Revisit Hardwiring Installation
Fuse Tap Inspection:
Double-check that you tapped into a fuse that is not critical to the vehicle's safety systems (e.g., airbag, FCW, or ECU fuses).
Use an accessory fuse (usually marked ACC or cigarette lighter).
Voltage Check:
Ensure your camera hardwire kit is not back-feeding power into sensitive systems.
👉 Step 6: Professional Help
If the problem persists:
Visit a Mechanic or Dealership:
They can diagnose and repair any damage caused during the hardwire installation.
Explain the Issue:
Mention the hardwiring attempt to help them pinpoint the source of the problem quickly.
✅ Preventative Advice
When installing a hardwire kit, always use a fuse tap designed for the purpose, and confirm the compatibility of the circuit you're tapping into.
Consult the vehicle’s wiring diagram to avoid interfering with critical systems.
If you're lucky, resetting the system and replacing blown fuses should get your Honda Accord back to normal. Good luck!
@Dashboardwarninglights thank you very much, I backtracked as advised and it came down to the fuses not being in the correct slot..it had the #8 MISS SOL 10a fuse being put into one of the slots that was not suppose to have a fuse in it and no fuse at all in its slot. Thank you very much Sir!! It's so hard to believe that a tiny 10a fuse can cause such a gigantic problem like that..the mechanic was trying to charge $1050 for reset and a modular or modulator replacement or some mechanic jargon after he just ran a OBD a couple times, the thing looked like it was made by playskool I shit you not..I believe he had already knew what was wrong but he wanted to make it sound like it was serious to get my money..I really appreciate you...take care and ✌
@thebrokeway9838
I'm glad you were able to figure it out and avoid unnecessary expenses. Some mechanics, unfortunately, do try to upsell repairs, but your persistence saved the day. It's a great reminder to always double-check the basics before agreeing to costly fixes. I’m really happy I could help-take care, and safe driving!
Don’t forget to subscribe and like for more tips and solutions!
When i start my bmw for 4 minutes it says nothing and then i get a notification that my Collision Warning System is deactivated
@sxythe1734 If your BMW is displaying a notification that the Collision Warning System is deactivated after a few minutes of running, it could be due to several reasons. Here are some steps to diagnose and possibly fix the issue:
👉 Check for Obstructions: Ensure that the sensors and cameras related to the collision warning system are clean and unobstructed. Dirt, snow, or debris can block the sensors, leading to deactivation.
👉 Battery Voltage: Low battery voltage can cause various systems in your car to malfunction. Have your battery checked to ensure it is in good condition and properly charged.
👉 Software Update: Sometimes, a software update can resolve issues related to the car’s electronic systems. Check if there are any updates available for your car’s software and have them installed by a professional.
👉 System Reset: Try resetting the collision warning system. This can sometimes be done through the vehicle’s settings menu or by disconnecting the car battery for a few minutes (ensure you know your radio and other electronic settings before doing this, as they may be reset).
👉 Check for Recalls or Service Bulletins: Occasionally, manufacturers issue recalls or service bulletins for known issues. Check with your BMW dealer to see if there are any such notices for your vehicle.
Addressing the issue promptly is important for ensuring your safety and the proper functioning of your vehicle’s safety systems.
Where are the forward sensors?
@jonitaite6800 Forward sensors are typically located at the front of a vehicle or machine and include various technologies such as radar, lidar, ultrasonic, and cameras. They are usually positioned in strategic locations like:
Front Bumper: Common placement for radar and ultrasonic sensors for detecting obstacles and assisting in parking.
Grille: Often houses radar sensors to aid in adaptive cruise control and collision avoidance.
Windshield: Camera sensors for lane-keeping assistance, traffic sign recognition, and forward collision warning.
Side Mirrors: Can contain cameras or sensors to cover blind spots and provide additional forward-looking coverage.
Front Fenders: Sometimes used for side-facing sensors that still have a forward-looking component for detecting cross-traffic.
These placements ensure that the sensors can effectively monitor the area in front of the vehicle or equipment to enhance safety and operational efficiency.
The blinker fluid is low
@connerthomas3840 don't worry about the "blinker fluid"-that’s a bit of a joke! Cars don’t actually have blinker fluid; it's a humorous term sometimes used in automotive circles.
If you’re experiencing warning lights, here are some real things to check:
Forward Collision Warning System: This light can come on if there's an issue with the sensors, possibly caused by dirt or obstructions on the front of the car. Give the sensors a gentle clean and see if the light resets.
Just change or charge your battery easy fix
I clean the camera....and start the car...symbol was not on dashboard😊
@user-ck5kp9dn3k I talked about this video in Steps
Since you cleaned the camera and the light is no longer on, it suggests that the system is back to normal operation 👍
Mine says FCM radar disabled because this car is so fragil that under 1 year, the issues have no real protection.
@orbiteflow8909 your vehicle’s Forward Collision Mitigation (FCM) radar system is disabled, likely due to damage or misalignment. This can happen if the radar sensor (often located behind the front grille or bumper) is exposed to impacts, dirt, or harsh weather conditions.
👉 Clean the Radar Sensor: Check the front bumper or grille for dirt, debris, or snow obstructing the sensor. Clean it gently with a microfiber cloth.
👉 Check for Damage: Inspect the sensor and its mounting area for cracks, misalignment, or damage.
👉 Reset the System: Turn the car off, wait a few minutes, and restart it. This may clear minor glitches.
👉 Calibrate the Radar: If misaligned, the sensor might need recalibration. This requires specialized equipment at a dealership or repair shop.
👉 Inspect Wiring and Connections: Look for loose or damaged wiring near the radar unit.
If the issue persists, visit a professional technician or dealership. They can run diagnostics and recalibrate or replace the sensor if necessary.
📍 I hope you can fix it quick and that there is nothing more serious.