thank you so much for posting the adaptions. i got mine wired and working... the weird thing is the main ambient light (long one running the length) does not dim with the handle or grip LEDs. also the controls in the MIB are different.
@@mrfixpl that is what i thought as well, i also think i have something coded wrong in the 5f unit. my ambient light scroll bar is completely different. i will post a video of me messing around with it if you are curious feel free to check it out.
Great Job . Wanted to do the same on my Tiguan MK2 . I need help with the wiring , what pins did you use on the 32 connector for the driver and the passenger doors ??? Helppp plz
Hi! You did really nice job! Could you please give me an advise? I retrofitted GTD door panels on my 7.5 Golf, installed everything due to ETKA, code everything like you did (thanks a lot for coding instructions), but inner door light isn’t bright at all. I read literally everything in 009 block, couldn’t find any mistake. Your advises and help are appreciated
@@mrfixpl I tested with headlight light switch on: Ambient light is working, the light under the handle also is working on the 100%, my “problem” light under the open handle is working on 1%. Then I change light intensity on my multimedia, ambient and light under the handle response correctly, even if I move toggle to 0% - they both switched off, my “problem” light stays in current state (1%). Then I switched all the lights in my car - problem light is switched off too.
Looks great, I've been following this install although my MK7 already has these door cards :D I'm curious about something you showed in the first video which was the LED strip glowing red instead of white if you flip the two cables. Does that really work and is safe to try? Also, one of the door handle LED's is flashing a lot or turning off regularly. Do you know if there is there any way to replace those? Thank you!
AFAIK this white/red thing was installed in EU-spec cars, not in NAR. But you can try it. I think it's safe. In Seat Leon (which is basically Golf MK7) BCM controls the color and switches from white to red in SPORT mode. While you're at it check the connection of the handle LED. Maybe it's just a loose wire.
@@mrfixpl That's lucky since I live in the EU, so I will definitely try it! I still haven't put the door card clips in since I retrofitted the door exit lights with the VW Ligo projectors :D and I will check for loose wires in the meantime, hopefully that's the problem since the light still comes on sometimes!
@@mrfixpl And thank you very much for the help! I've been following you since I've got my OBDEleven and ended up learning about many other Golf related things 👌🏼💪🏼
How do I do these codings using VCDS ? Is there any translation from these parameters to the ones showed on VCDS ? I don’t have obdeleven just VCDS and some of these coding lines are missing there. Sorry for my bad english
Hey MrFix i hope you Can answer My question I have eBay ambient that works with 5 controllers through Bluetooth. Would i be able to put My main controller and Connect that door led to the correct pin in the 32pin Connected and make the Lights work as oem without coding. I only need the power to work as oem. I dont need to change lights in the car screen
Hello, Golf 7 variant 2015 Retrofit front door panels with warning lights below the door card,door handle illumination and ambient illumination. Door panels with this options come from a donor car. Door control module = 5Q4 959 592 = module ok for retrofit I think Door controle module 32 pin connector : Pin3 = power for door handle illumination Pin 8 = power for ambient illumination Pin 16 = power for warning light Pin 5 = ground (brown cable window swith)(ground for warning light and handle/ambient illumination) I followed this wiring diagram. Coding according to information from mr-fix : 💻 #Coding 5F → Adaptation → Vehicle function list BAP → interieur_light_0x08 → Activated 5F → Adaptation → Car_Function_Adaptations_Gen2 menu_display_ambient_illumination → activated menu_display_ambient_illumination_over_threshold_high → activated 42/52 → Long Coding → Byte: 01 → Bit 01 → enable (ambient) 42/52 → Long Coding → Byte: 01 → Bit 03 → enable (door handle) 42/52 → Long Coding → Byte: 01 → Bit 02 → enable (warning light) 09 → Security Access → 31347 09 → Long Coding → Byte: 17 → Bit: 01 → enable (Ambient door panel light) 09 → Adaptation Interior light; light configuration → Ambiente_Applikationsleisten_in_Tuertafel → installed Ambient lighting → Defaultwert Ambienteprofil Tuer → 50% Interior lighting: parameter → p_adaption_kundenwunsch_tuer → 3C ??? 09 → Adaptation → Interior lighting: parameter p_helligkeit_andereTuer_auf_zuendung_aus_tueren → 96% p_helligkeit_andereTuer_auf_zuendung_ein_tueren → 96% p_helligkeit_dieseTuer_auf_zuendung_aus_tueren → 96% p_helligkeit_dieseTuer_auf_zuendung_ein_tueren → 96% p_helligkeit_einausstieg_tueren → 96% p_helligkeit_entriegelt_tueren → 0% p_helligkeit_Fzg_geschlossen_schluessel_ab_tueren → 96% p_helligkeit_Fzg_geschlossen_zuendung_aus_tueren → 127% p_helligkeit_Fzg_geschlossen_zuendung_ein_tueren → 126% p_helligkeit_HD_auf_zuendung_aus_tueren → 127% p_helligkeit_HD_auf_zuendung_ein_tueren → 126% p_helligkeit_max_tueren → 100% p_helligkeit_Tueren_geschlossen_HD_auf_zuendung_aus_tueren → 100% p_helligkeit_Tueren_geschlossen_HD_zu_zuendung_aus_tueren → 100% p_helligkeit_Tueren_geschlossen_schluessel_ab_tueren → 100% 09 → Adaptation → Interior lighting: parameter p_t_verzoegerung_ausstieg_tueren → 0s p_t_verzoegerung_einstieg_tueren → 5s p_t_verzoegerung_entriegelt_tueren → 0s p_t_verzoegerung_oeffnen_tueren → 0s p_t_verzoegerung_schliessen_tueren → 0s p_t_verzoegerung_schluessel_ab_tueren → 0s p_t_verzoegerung_verriegelt_tueren → 0s ERROR= Interior lighting: parameter → p_adaption_kundenwunsch_tuer → 3C ??? What is the correct value? From this step and the steps below I have a problem with OBDeleven. Cannot save the parameters or I get the following message: adaptations function cannot be performed , mess,length of format incorrect. Someone a solution? Thank you , Best regards, Bjorn
Great work! I started to prepare for a similar retrofit in my Touran 5T. I was always wondering which lights go into the door handle circuit and which for the ambient light circuit. For door handle - only the upper one? The rest for ambient light? Thank you
Hi, awesome videos ! My door control module end with 393E , but in the coding option i do have ambient lighting options and in adaptation all the ambient lightning settings are there...do you think im good ??? Thanks
Hi mate ! I've followed and did all your retrofits, but I have a small problem with the LED strip line on the door. The brightness is quite low, even tho I have set it to 100% on the MIB. Either on white or red, the brightness is around 50% of actual brightness. Can you help me ? Thanks !
What type of wiring do I need? 18 AWG? Also, my door module ends with 393, so it's a really basic one. Do you think I can connect to something else? Like window swich lighting, or something else? Thanks
Need OBDeleven?
🎟 Get 10% OFF with code: MRFIX10
🛒 mr-fix.info/redirect/obdeleven
You’re a skilled man 👍
Looks brilliant with led lighting
Golf MK7 Las Vegas edition 😀
Thank you so much that brilliant keep the videos coming
✌️
Thats fantastic! Thank you
👍
Awesome work, good job.
😀👍
thank you so much for posting the adaptions. i got mine wired and working... the weird thing is the main ambient light (long one running the length) does not dim with the handle or grip LEDs. also the controls in the MIB are different.
That's strange. As far as I remember the grab handle and the LED strip is on circuit.
@@mrfixpl that is what i thought as well, i also think i have something coded wrong in the 5f unit. my ambient light scroll bar is completely different. i will post a video of me messing around with it if you are curious feel free to check it out.
Dobra robota
Great Work!!! you you didn't show the rear doors
The warning lights working correctly when you open- closed doors??
Great Job . Wanted to do the same on my Tiguan MK2 . I need help with the wiring , what pins did you use on the 32 connector for the driver and the passenger doors ??? Helppp plz
Hi! You did really nice job! Could you please give me an advise? I retrofitted GTD door panels on my 7.5 Golf, installed everything due to ETKA, code everything like you did (thanks a lot for coding instructions), but inner door light isn’t bright at all. I read literally everything in 009 block, couldn’t find any mistake. Your advises and help are appreciated
"isn’t bright at all" as in "stays off"?
@@mrfixpl I tested with headlight light switch on: Ambient light is working, the light under the handle also is working on the 100%, my “problem” light under the open handle is working on 1%. Then I change light intensity on my multimedia, ambient and light under the handle response correctly, even if I move toggle to 0% - they both switched off, my “problem” light stays in current state (1%). Then I switched all the lights in my car - problem light is switched off too.
Looks great, I've been following this install although my MK7 already has these door cards :D
I'm curious about something you showed in the first video which was the LED strip glowing red instead of white if you flip the two cables. Does that really work and is safe to try?
Also, one of the door handle LED's is flashing a lot or turning off regularly. Do you know if there is there any way to replace those?
Thank you!
AFAIK this white/red thing was installed in EU-spec cars, not in NAR. But you can try it. I think it's safe. In Seat Leon (which is basically Golf MK7) BCM controls the color and switches from white to red in SPORT mode.
While you're at it check the connection of the handle LED. Maybe it's just a loose wire.
@@mrfixpl That's lucky since I live in the EU, so I will definitely try it! I still haven't put the door card clips in since I retrofitted the door exit lights with the VW Ligo projectors :D and I will check for loose wires in the meantime, hopefully that's the problem since the light still comes on sometimes!
@@mrfixpl And thank you very much for the help! I've been following you since I've got my OBDEleven and ended up learning about many other Golf related things 👌🏼💪🏼
A lot of work
It seams like a lot of work, but once I exactly knew what to do, second side was done within 30-45 minutes.
How do I do these codings using VCDS ? Is there any translation from these parameters to the ones showed on VCDS ? I don’t have obdeleven just VCDS and some of these coding lines are missing there.
Sorry for my bad english
Hello how did you do the coding? With VCDS i cant see the adaption channels for parameters?
Hey MrFix i hope you Can answer My question
I have eBay ambient that works with 5 controllers through Bluetooth. Would i be able to put My main controller and Connect that door led to the correct pin in the 32pin Connected and make the Lights work as oem without coding. I only need the power to work as oem. I dont need to change lights in the car screen
Hello,
Golf 7 variant 2015
Retrofit front door panels with warning lights below the door card,door handle illumination and ambient illumination. Door panels with this options come from a donor car.
Door control module = 5Q4 959 592 = module ok for retrofit I think
Door controle module 32 pin connector :
Pin3 = power for door handle illumination
Pin 8 = power for ambient illumination
Pin 16 = power for warning light
Pin 5 = ground (brown cable window swith)(ground for warning light and handle/ambient illumination)
I followed this wiring diagram.
Coding according to information from mr-fix :
💻 #Coding
5F → Adaptation → Vehicle function list BAP → interieur_light_0x08 → Activated
5F → Adaptation → Car_Function_Adaptations_Gen2
menu_display_ambient_illumination → activated menu_display_ambient_illumination_over_threshold_high → activated
42/52 → Long Coding → Byte: 01 → Bit 01 → enable (ambient)
42/52 → Long Coding → Byte: 01 → Bit 03 → enable (door handle)
42/52 → Long Coding → Byte: 01 → Bit 02 → enable (warning light)
09 → Security Access → 31347
09 → Long Coding → Byte: 17 → Bit: 01 → enable (Ambient door panel light) 09 → Adaptation Interior light; light configuration → Ambiente_Applikationsleisten_in_Tuertafel → installed Ambient lighting → Defaultwert Ambienteprofil Tuer → 50%
Interior lighting: parameter → p_adaption_kundenwunsch_tuer → 3C ???
09 → Adaptation → Interior lighting: parameter p_helligkeit_andereTuer_auf_zuendung_aus_tueren → 96% p_helligkeit_andereTuer_auf_zuendung_ein_tueren → 96% p_helligkeit_dieseTuer_auf_zuendung_aus_tueren → 96% p_helligkeit_dieseTuer_auf_zuendung_ein_tueren → 96%
p_helligkeit_einausstieg_tueren → 96%
p_helligkeit_entriegelt_tueren → 0%
p_helligkeit_Fzg_geschlossen_schluessel_ab_tueren → 96% p_helligkeit_Fzg_geschlossen_zuendung_aus_tueren → 127% p_helligkeit_Fzg_geschlossen_zuendung_ein_tueren → 126% p_helligkeit_HD_auf_zuendung_aus_tueren → 127%
p_helligkeit_HD_auf_zuendung_ein_tueren → 126%
p_helligkeit_max_tueren → 100%
p_helligkeit_Tueren_geschlossen_HD_auf_zuendung_aus_tueren → 100% p_helligkeit_Tueren_geschlossen_HD_zu_zuendung_aus_tueren → 100% p_helligkeit_Tueren_geschlossen_schluessel_ab_tueren → 100%
09 → Adaptation → Interior lighting: parameter p_t_verzoegerung_ausstieg_tueren → 0s p_t_verzoegerung_einstieg_tueren → 5s p_t_verzoegerung_entriegelt_tueren → 0s p_t_verzoegerung_oeffnen_tueren → 0s p_t_verzoegerung_schliessen_tueren → 0s p_t_verzoegerung_schluessel_ab_tueren → 0s p_t_verzoegerung_verriegelt_tueren → 0s
ERROR=
Interior lighting: parameter → p_adaption_kundenwunsch_tuer → 3C ???
What is the correct value?
From this step and the steps below I have a problem with OBDeleven.
Cannot save the parameters or I get the following message:
adaptations function cannot be performed , mess,length of format incorrect.
Someone a solution?
Thank you ,
Best regards,
Bjorn
Can you Show us how we can build the rear light in the back doors?
You can use 3rd party parts from AliExpress or make custom ones. So far I've managed to add just the LED behind the door grab handle.
@@mrfixpl yes :) but i dont know where the Right cable :D
Great work! I started to prepare for a similar retrofit in my Touran 5T. I was always wondering which lights go into the door handle circuit and which for the ambient light circuit. For door handle - only the upper one? The rest for ambient light? Thank you
Hi! How do you do this install, but do the blue lights like in the golf r? Any link or tips on where to buy them.
Excuse me, I hadn't seen part 4 yet ;)
Do you know the PINs of the door module for the door entry lights (puddle lights from wing mirror) i would like to retrofit them to leon 5F
Hi, awesome videos ! My door control module end with 393E , but in the coding option i do have ambient lighting options and in adaptation all the ambient lightning settings are there...do you think im good ??? Thanks
Hi mate !
I've followed and did all your retrofits, but I have a small problem with the LED strip line on the door. The brightness is quite low, even tho I have set it to 100% on the MIB. Either on white or red, the brightness is around 50% of actual brightness. Can you help me ? Thanks !
What type of wiring do I need? 18 AWG? Also, my door module ends with 393, so it's a really basic one. Do you think I can connect to something else? Like window swich lighting, or something else? Thanks
What did you tap into for the back doors
Hello may I ask, how can I configurate from vcds the ambient light? Do you know the coding please?
great job mate ....what about this on on MK7,5 i tried all the coding and no succes.
Skip coding, just do adaptations.
Hello Laroussi, Did you manage to install it on MK7.5? I'm stuck on coding
The 4 pin connector is that's to be used in the rear doors or what is it for ?
Hi, from which wire do you get the positive? Plz help
Can you confirm if these settings work for Golf 7.5?. Enjoy your work.
Sometimes channel names are little bit different but it should work in Mk7.5 as well.
@@mrfixpl Its just the Adaptations only, then, in 7.5, and not the long coding?
What is coding without strip only handle led