Chrysler 200 ABS Repair/Hub Bearing replacement
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- Customer brought in vehicle with abs and traction control lights on. Scanned using my launch x431 to find trouble codes c1041 and c1011. graphed all wheel speeds to begin my diagnosis and ultimately find the root cause of the problem and get repaired. Thanks for watching!
Amazing video, just purchased this car from a dealer today and on the way home both the abs and traction light came on. thank you very much for the information. i would love to see more of these if you replace anything more on the 200.
Glad it helped
Holy spit, I thought replacing the speed sensors would do it, but now I realize I have much bigger problems to get that ABS light off. This car is so dangerous in the snow, almost no control. Thanks for the video!
Very welcome! Thanks for watching!
Great video. Very simple and clearly showed step by step. 👍
Glad it was helpful!
You have a very cute assistant laying in the doorway ❤️
Good work! Enjoyed the video. Keep them coming !
Thanks, will do!
Thanks for this great video very helpful
Glad it was helpful!
Hi buddy. Please, tomorrow I will change the mine, but, I don’t have drill or other special toll; when do I stop tightening because I only have a normal wrench, no torque indicator..... and no, I'm not a mechanic.....
Find a man that weighs exactly what the torque spec is in pounds, cut your wrench off at exactly 12 inches, and have that man stand on the very end of that wrench to tighten it with the wrench positioned perfectly parrellel to the ground. I would strongly recommend just buying a $15 torque wrench tho
@@BustedtoBuilt RTFOL....
Thanks for the video
You're very welcome thanks for the view!
Great job. Where is your workshop? I have the same problem in my Chrysler.
Brown City, MI
I liked the functionality of your scan tool. What make was that one?
This is a launch x431 thanks for watching!
Hi my Abs, brake light and the sliding car blink on and off while driving and the odometer goes from my current speed to 0 all at the same time. No one has been able to figure out how to fix. Any idea how what’s causing it. Please help.
Any associated trouble codes?
any update? My 2011 has the same exact problem and I cant find the answers anywhere
Alternator
Had everything replaced 2 yrs ago at Midas before the one year warranty was over everything was doing the same thing as before. They didn't honor their warranty after I paid almost $800, they wanted another $600 to fix what was wrong with it and possibly more depending on what was wrong. In that 2 yrs I've replaced tires 8 times, brakes 5 times now the mechanic working on my car had to replace everything Midas did and the problem the whole time was the wheel bearing fused like this. My mechanic just works on cars for extra cash, it's not his career so he doesn't have these tools so I'm hoping he can do it or I'll have a new lawn ornament. 😂😭
Shouldn't be a bad repair, hope it goes well!
What if the traction control light was coming on and the car was going into limp mode but the abs light was not coming on? Possible same problem?
I have a 2013 200, it was the electronic throttle body on mine. It's fairly easy to replace, $ 140 from amazon. There's videos on removing and installing. Inside the unit are PLASTIC cogs that move to open and close the butterfly, the teeth on the cog goes bad,stripped. When the cog rotates to where the teeth are fine, the vehicle runs fine, but as the cog rotates to the stripped section, the butterfly doesn't open properly and the car runs poorly. Best of luck to ya. I got 150k on mine and it's still going. Has been a pretty damn good little car, for a chrysler.
Sounds unrelated
My abs light, traction control light and brake lights are on and this may be the issue. My check engine light is also on and the error code says system voltage low, could this also be the reason?
Unlikely this is your issue
How much does this cost
I charge an hour labor
Hi my car has the abs light, the traction control also check engine light. And my speed meter will cut out sometimes, only after my brake light comes on it will go back. I’ve replaced the wheel sensors on both sides. But still nothing happened. Any ideas
Beyond me
ayyy its been 7 months what happened? i have the SAMEEE thing happening on my 2011
Speed sensor and wheel bearing, two different parts
❤
Thanks!
That was super helpful
Glad it helped!