"Mosquito Helicopter Ballet"
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- All Ultralight Flying is minimalist in nature. In order to meet the weight requirements, structures and engines are pared down to the barest material needed for the strength required. They become models of aeronautical engineering.
One of the most complex of all flying systems is the helicopter. The mechanism used in order to allow the spinning wings (rotor) overhead to perform while the craft maintains forward motion is akin to the proverbial "Swiss Watch".
Tying both of these engineering challenges together is an elegant, spare, flying machine from Australia called "The Mosquito".
Doug Bryant of Wichita, Kansas dances his Mosquito through a variety of maneuvers in what Cameraman/Director/Editor Brian FitzGerald calls "Mosquito Helicopter Ballet". This music video is a segment of the movie "Ultralight Flying Millennium 2" by Brian FitzGerald. More on it can be seen here:
fitzvideo.com/p...
![ผัวเถื่อน - ยูริ โตเกียวมิวสิค [ OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/P08ORRVDGl8/mqdefault.jpg)
I’m half way through building my affordaplane and i just had to find plans for one of these ultralight helicopters on ebay 🤦🏻♂️ here i go again building more toys
Good luck mike
Super popular in Australia.
Gee, well thought and planned, make mass production and sell them at reasonable price.
Go here:
composite-fx.com
very nice, he knows how to fly that little heli.....cheers
Wow ... I like it ! Simple prototype and smooth modificated 👍
composite-fx.com/
This helicopter is just how much coin we make
They will tell you here:
composite-fx.com/
congratulation , mmm i would like to have the plans , help me please
He should teally keep his visor down in case of birdstrike.
Kt mau belajar cara membuat dan merakit helikopter,mohon ada petunjuk dan tutorialnya
composite-fx.com/
Why is his left foot bouncing on the yaw pedal?? Is that from being nervous or from the tail blades being unbalanced? (I noticed theres some tail vibrations)
it might just be from the motor if he built it himself
I think it's natural nerves really. I have the same problem flying an RC heli at times. With my hand though of course. If I'm sort of on the edge of my abilities, I may shake a bit.
Doug is doing the Wichita two step. Doing just fine too. It will gradually go away as he acclimates to this bird -
Scott Ream The type of engine used for a single-person helicopter
I was just thinking the same thing
Sir can you please tell how you made it and what you used
Please go here:
composite-fx.com/
Blue Skies & Tailwinds!™
Brian FitzGerald - The Sky Surfer
very nice, are those fuel tanks on top of your head? and what type of engine are you using? :)
Trymore Kefasi Yes, those are his fuel tanks. At that time he was using an MZ-202 engine but he has since switched to a Rotax 503.
Curios here. No smart comments. I did the jet ski thing for about five years. Almost every weekend seriously. Colorado River. Anyhow, the "Skis" that I saw broken down more than any were those with Rotax motors. When I started to view videos of ultralights and so on, I saw that many used Rotax motors. This seemed odd to me due to my anecdotal "evidence".
I also noticed that Yamaha motors seemed to be virtually bullet proof. The stock ones anyhow. However, I don't see Yamaha motors in Ultralights. Is there anything to this?
On that note. (Dependable motors.) Is a turbine more dependable than say a tried and true four stroke motor designed for the air such as a Lycoming?
Great video! In addition to my RC helicopter, I have 6.5 hours in the jump seat of a Huey while performing aeromedical transport, so I have some idea how choppers fly. This sure looks nice, and possibly the only one I could ever own (or fly). I am, as is always the case, quite disappointed that instead of hearing the sound of the engine, we get cornball "music."
J. D. Schultz, Sr. Inm
Which engine (bicycle, car or anything else ) you used in this project ?
You can't hear the engine just wind noise. You can mute the music and play Nascar in the background and get a better idea of what it sounds like.
very kool,,,,,,would like to hear the heli sound,,,,,,
I doubt it. It sounds like a bunch of bees in a mason jar after you shake it up.
You can start up your chain saw and get the same motor music.
Me personally, I didn't like the racket but decided to put one of my all time favorite tunes under it.
Brian FitzGerald + Nevertheless, I'd rather hear the engine. 1000 to 1.
That Fan is big enough for any hot day
Moga orang indonesia ada yg bisa bikin seperti ini
Tentu
composite-fx.com/
Amazing ... I don't know how he can control the balance without overturning while flying.
I am Indian very nice
Thanks! See more here:
composite-fx.com/
You didn't have any fun at all, you never smiled anytime. what was wrong? 9/21/2017
Doug's a serious guy...
you have great man sir
wow amazing
What does it cost for something just like that?
Sir please tell us where these spare parts are available
check here:
mosquitohelicopters.com.au/
SUPER VIDEO
Thanks!
Check out my other stuff at:
www.fitzvideo.com
Why Does your left foot pulsate on the tail pedals.hopefully I will get a xel soon.great control of the air mosquito.Thanks R.M.
Doug had a transient vibration that he later dampened. I believe it started in the tail rotor and caused the boom to flex ending up at his foot pedal. Vibrations like that are a common factor with helicopters.
Dear Petr,
I am not a dealer. I just produced this movie as part of a documentary I made. I will send your info to the guy flying The Mosquito, though. He is a dealer.
Blue Skies & Tailwinds!™
Brian FitzGerald - Wichita
With that lawn mower engine if you had a blade on the bottom you could cut the grass at the same time. Lol.!!! Just kidding, great machine.
Great point!
الله يعاونك
Why is the pilot's left foot continually twitching for crying out loud? 😎
It has to do with the large number of competing vibrations coursing through all helicopters. They tend to manifest at one spot in the frame and in this copter they show at that foot petal.
Cuánto es el costo y especificaciones técnicas gracias
Go here:
www.innovatortech.ca/
Very good
Отличный flying stool !
would rather hear the bird than music
Listen to a chain saw then.
The best
Триммера под хвостовой не хватает...
Go here:
composite-fx.com/
31 grand in kit form
40 grand bought from the factory (usd)
You should plan on getting 40 hours instruction time.
I am buying a small 🚁 I helicopter
Good man.
COME TO SUMATRA INDONESIA TEACHENG MAKE HELIKOPTER
Go here:
composite-fx.com/
*very expensive and complicated suicide machine*
I disagree. A Buddy of mine saw Doug recently. He seemed quite alive.
Full vedio about how to build mosquito helicopter
Go Here:
composite-fx.com/
Does he have Parkinson's Disease or is it the tail rotor that unstable?
Almost perfect.…/about simple/
Sir pls helicopter components name pls all parts
Go here:
composite-fx.com
Looks easy and simple how can I build ine
Go here:
composite-fx.com
If someone want this thing....how money ? 😁
Go here:
composite-fx.com/
Hola algún asesor para inf de ventas de rotor
Ven aquí:
composite-fx.com/
Maaf....mesin apa yang digunakan itu...
آسف .... ما الجهاز الذي يستخدم ذلك.
I got my commercial and instrument rating in helicopters, and I miss it every day, but I have to admit I would be terrified to fly that thing!! How are you managing your engine power or manifold pressure and rotor RPM without gauges? Is the throttle using a correlater, or is it 100% manual? Yikes! I would at least need a rotor RPM gauge! It's so critical especially the lighter the helicopter is and the smaller the engine is the preferred rpm range for the main rotor can be a very small range between minimum and maximum rotor RPM. It becomes even more critical when you're using a light low inertia rotor system that is highly susceptible to very rapid changes and rotor RPM.
+TomVaillencourt
Dear Tom,
I did the music video and the interview. This is part of my movie "UFM2".
I'm certain he has a rotor tach. This is a two cycle engine so he is using a tach on it also but he told me he ran it 100% all the time.
I think you haven't seen the interview part yet. Check it out here:
th-cam.com/video/7yUprHABFe8/w-d-xo.html
You also might like my latest post (a POV movie) called "The Search for Mustang Valley":
th-cam.com/video/SYRAuxkCdWw/w-d-xo.html
Blue Skies & Tailwinds!™
Brian FitzGerald - The Sky Surfer
I did watch the Mustang Valley video right after you posted it! Another fantastic video as usual!!!
Just fly the fucking thing and don’t worry about all that shit
Utterly superb.
Thanks a lot 😊
Aska engle or bled funtion ka kitna kimot he bateye
I think you are asking the cost. It is in the $30,000 US range.
Good day, where can I get hold of the plans for this helicopter, please advise I will much appreciate it.
Try here:
composite-fx.com
Eu quero um melhor fazer que comprar
Eu acredito que eles são vendidos como kits também. Confira este site e talvez eles possam ajudá-lo a atingir seu objetivo:
www.redbackaviation.com/mosquito-helicopter-mosquito-air-mosquito-xe-xel-kit-helicopters/
Hello sir please
I'm India Orissa
Go here:
composite-fx.com/
Good
Apa boleh saya pinjam?
Sure.
ممكن اتواصل معاك صانع الطائره
composite-fx.com/
J
Sir what its engine called
MZ 202. That's what he had on it when I shot the movie. After that he replaced the MZ with a Rotax 503.
I noticed the tail rotor rotates in the opposite direction as most helicopters, usually they rotate up into the main rotor wash, was this portion of the video run backwards or does it actually turn this way ?
There is no reverse video in this piece. What you see is what I saw. You can find more about the Mosquito on their website.
www.innovatortech.ca/
I want to be fly this helicopter
Can u explain how you control the yaw of the homemade helicopter
Go here:
composite-fx.com/
How I get this Helicopter?
Go here:
composite-fx.com/
Beautiful !!
Perfect !!
Pbs pela postagem e forte abraço.
Rj Brasil. Bons vôos..
Go here:
composite-fx.com/
what engine is that used for
He later put a Rotax 503 on it that worked better. 48 hp.
Es un video de efectos especiales de grabación o de un pequeño helicoptero?
It is the real thing:
composite-fx.com/
People, it’s time there’s a semi-automated mini heli. The thing takes off and lands if you can’t, takes over mid air if you want. Open this thing up man let’s start getting everyone in the air!
That's what a variety of folks are trying to do with drone-type craft. If you search the web you will find a lot of experiments in that direction. I think the main thing to conquer, though, is the noise inherent in the design. Whenever you have propellers turning at the high speeds drones use, you get a lot of racket from the tips.
Maybe a ducted fan drone can work.
How to make routers blade
Go here:
composite-fx.com/
I like, I from Indonesia
Go here:
composite-fx.com/
Muy buenas ideas de la gente
!Si!
I notice his left leg keep pushing the pedal. Always
It was from a sympathetic vibration in the whole system.
Where are the drivers airbags?
Saludo,, me gustaría saber donde comprar las palas y el plato cíclico del helicóptero,, estoy construyendo el mío en Colombia
Estimado señor,
Lo mejor sería que vayas a su sitio web y les preguntes. Es aquí:
composite-fx.com/
Blue Skies & Tailwinds! ™
Brian FitzGerald - El surfista del cielo
www.fitzvideo.com/
Karpya hame esko modne ke bare m sikhay
Is it still operational
composite-fx.com/
Hola buen día para todos, estoy muy interesado en el elicoptero, como se hace para adquirir uno
Go here:
composite-fx.com/
SUPER+++++!!!! Tudi jaz želim, da bi, koliko denarja je potrebno, da bi helikopter?
I think it is in the $30,000 range. You can talk to the guy in the movie about it, Doug Bryant. Here is his email: debryant1@cox.net
Don't forget! Flying helicopters takes training and practice.
Have you looked at "Sky Boogie" on my TH-cam Channel, yet?
I think you will like it.
Later,
Brian - Wichita
What is the cost for it
I think they are around $27,000 US
Go here:
composite-fx.com
What is cost in INR
Check here:
composite-fx.com/
How i get this helicopter
Dear Ayman,
I will forward your email address to the dealer. He is the pilot in the movie and his name is Doug Bryant.
Blue Skies & Tailwinds!™
Brian FitzGerald
Bom dia
Me manda o projeto desse helicóptero pra mim
buenas gentileza quien es el fabricante y cual es el costo? disculpe el idioma.
composite-fx.com/
هنيئا لك التحليق عالياً.اتمنى ان ياتي يوما ونحلق مثلك لنحقق احلامي،تحياتي من الجزائر
شكر! يمكنك أن تطير أيضا. ألق نظرة على بعض مقاطع الفيديو الخاصة بي. إن Quicksilver Ultralight في متناول يديك ، لكن لا تأخذ الوقت الكافي لتتعلم كيف تطير قبل أن تقلع بمفردك.
انتقل هنا أولاً للانتقال إلى قناتي في TH-cam:
www.fitzvideo.com/
السماوات الزرقاء و Tailwinds! ™
براين فيتزجيرالد - سكاي سيرفر
buenas tardes, soy de Argentina, se pueden conseguir los planos de construccion?
Es bueno saber de ti. Me gustaría visitar Argentina algún día. Aquí hay un par de sitios web que tienen que ver con el Mosquito:
www.mosquito-helicopter.info/
y
www.composite-fx.com/Compfx/Welcome.html
¡Buena suerte en tu búsqueda!
Brian FitzGerald - El Sky Surfer
How high up can it go ?
Δεν σηκοσετε πιο ψηλά 😃😂
Ναι. Δεν φαινόταν να θέλει να πάει ψηλότερα αν και το μηχάνημα μπορεί να πάει πολύ ψηλότερα. Στον Νταγκ αρέσει να δοκιμάζει τις ικανότητές του κοντά στο έδαφος.
A mi me gustaría diseñar uno, si alguien me pudiese ayudar o decirme qué precio tiene.
Please go here:
composite-fx.com/
ผมอยากได้ครับ ผมขอซื้อต่อได้ไหมครับ
ไปที่เว็บไซต์นี้:
composite-fx.com/
How much did it cost?
Does it fly from California to New York?
Lol
Nice! Could you put wheels on the landing legs if ya wanted to?
You are smart !! what a nice achievement. Could you please tell me what the exact name of engine you used here ?
The name escapes me right now but it was made in Italy. That one blew up so Doug switched to a Rotax 503.
You can find more here:
www.mosquito-helicopter.info/Mosquito_Model_XE285.html
Quero um desse quanto custa
I hope can make the helicopter as the same ....
Get started here:
composite-fx.com/
I want pay bro
Check it out here:
composite-fx.com/
How many to engine
Good project
Indeed. Check out this site for more:
composite-fx.com
is ur tecnologey for poor pepole if yes very good sir
+vishal
Sorry, Vishal. This machine costs about $27,000 U.S. It is not cheap. Like they say, it is not gasoline that keeps airplanes flying - it's MONEY!
सर मै इस हेलिकॉप्टर प्रोजेक्ट को देखना चाहता हू यह मुझे कहा मिलेगा फोन नंबर भेजो न
OK. Being English speaking, I ran that through the web translator and got "Sir, I want to see this helicopter project".
Since these "artificial intelligence" translators are not quite there, my guess is you want the website.
Now it is your turn to translate.
Here is the Mosquito site:
www.innovatortech.ca/
Oh....yes....oh no.....