Add Wi-Fi Controls & Camera To Any 3D Printer - Plug & Play - Beagle V2 Camera
ฝัง
- เผยแพร่เมื่อ 5 มิ.ย. 2024
- This might be the easiest and cheapest way to add Wi-Fi controls and a camera to just about any 3D printer using the new Beagle V2 Camera. This full setup is basically just plug & play.
Beagle V2 Camera - bit.ly/BeagleV2Camera
(10% discount code: 3DPRINTERCAMERA)
Beagle V2 Camera - Amazon US: amzn.to/3pTqkly
(5% discount code: BeagleCamera)
Beagle V1 Camera - bit.ly/BeagleCamera
($5 discount code: BGCAMSAS)
Beagle V1 Camera - Amazon US: amzn.to/44tXJ58
STL File for Beagle Camera Threaded Tripod Base Mount (cults3d) - bit.ly/REPLACEMENT-THREADED-B...
STL File for Beagle Camera Threaded Tripod Base Mount (My Website) - gomeowcreations.myshopify.com...
3D Printers that I used in the video:
ELEGOO Neptune 3 Max - bit.ly/NeptuneMax
Prusa MINI - bit.ly/Original-Prusa-MINI-Plus
3d Printer Filament That I Use:
PolyLite ABS - bit.ly/PolyLite-ABS
PolyLite ASA - bit.ly/PolyLite-ASA
PolyFlex TPU 95 (Flexable) - bit.ly/PolyFlex-TPU-95
PolyLite Silk PLA Blue - bit.ly/PolyLiteSilkPLABlue
NylonX Filament - bit.ly/MatterHackersNylonX
PolyTerra Marble PLA - bit.ly/PolyTerraMarblePLA
TECSONAR Tricolor PLA - amzn.to/3H79d5N
Build Series PLA - bit.ly/MatterHackersBuildSeri...
Build Series Silky PLA - bit.ly/BuildSeriesSilkyPLAMat...
Build Series ABS - bit.ly/MatterHackersBuildSeri...
Build Series PETG - bit.ly/MatterHackersBuildSeri...
PRO Series Filament - bit.ly/MatterHackersPROSeries...
Amazon 3D Printing Filament:
PLA - amzn.to/3gsLE9Z
PETG - amzn.to/3pXjjvu
ABS - amzn.to/3wsTRjS
ASA - amzn.to/2RX8dtM
Polycarbonate - amzn.to/3cLdr38
Nylon - amzn.to/3iNGeI2
________________________________________________
Note : Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. 😁👍
________________________________________________
#beaglecamera #3dPrinting #DIY #octoprint #RandyMay - แนวปฏิบัติและการใช้ชีวิต
Beagle V2 Camera - bit.ly/BeagleV2Camera
(10% discount code: 3DPRINTERCAMERA)
Beagle V2 Camera - Amazon US: amzn.to/3pTqkly
(5% discount code: BeagleCamera)
Beagle V1 Camera - bit.ly/BeagleCamera
($5 discount code: BGCAMSAS)
Beagle V1 Camera - Amazon US: amzn.to/44tXJ58
STL File for Beagle Camera Threaded Tripod Base Mount (cults3d) - bit.ly/REPLACEMENT-THREADED-BeagleCameraV1
STL File for Beagle Camera Threaded Tripod Base Mount (My Website) - gomeowcreations.myshopify.com/products/beagle-camera-mount
3D Printers that I used in the video:
ELEGOO Neptune 3 Max - bit.ly/NeptuneMax
Prusa MINI - bit.ly/Original-Prusa-MINI-Plus
3d Printer Filament That I Use:
PolyLite ABS - bit.ly/PolyLite-ABS
PolyLite ASA - bit.ly/PolyLite-ASA
PolyFlex TPU 95 (Flexable) - bit.ly/PolyFlex-TPU-95
PolyLite Silk PLA Blue - bit.ly/PolyLiteSilkPLABlue
NylonX Filament - bit.ly/MatterHackersNylonX
PolyTerra Marble PLA - bit.ly/PolyTerraMarblePLA
TECSONAR Tricolor PLA - amzn.to/3H79d5N
Build Series PLA - bit.ly/MatterHackersBuildSeriesPLA
Build Series Silky PLA - bit.ly/BuildSeriesSilkyPLAMatterHackers
Build Series ABS - bit.ly/MatterHackersBuildSeriesABS
Build Series PETG - bit.ly/MatterHackersBuildSeriesPETG
PRO Series Filament - bit.ly/MatterHackersPROSeriesFilament
Amazon 3D Printing Filament:
PLA - amzn.to/3gsLE9Z
PETG - amzn.to/3pXjjvu
ABS - amzn.to/3wsTRjS
ASA - amzn.to/2RX8dtM
Polycarbonate - amzn.to/3cLdr38
Nylon - amzn.to/3iNGeI2
________________________________________________
Note : Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. 😁👍
________________________________________________
#beaglecamera #3dPrinting #DIY #RandyMay
Great video Randy. I think this might be a perfect way for people get an octoprint like setup with out any….setup. Glad they made some of these much needed improvements!
Hey Randy! I just want to know if you're ever going to do jewelry videos again or if you're done with that? I loved your jewelry vids, and I miss them. You're so great at designing and making jewelry. I learned a lot from you and your vids, please bring them back! 😢
I will at some point. I just got ready burned out doing that and then the 3d print stuff was taking over that main channel so I made this channel for all of that. That being said I'm getting a little tired of doing just review after review videos on new tech. I want to start actually using everything that I have to make cool projects.
I do have a project in mind showing how to use a 3D printer to 3D print a flat lap machine so you can make your own stone cutting machine for about $100
That would be so cool, I look forward to seeing that! Well, I follow you, so I guess I'll just have to sit tight till you get a chance to do some jewelry work. Good luck with the lap machine vid, I can't wait to see it. Keep posting, and I'll keep watching!
Perfect timing i was looking at this camera for sometime and have a Neptune 3 Max, glad this cam is able to be used
😁👍
Did you end up getting the camera? I have a 3 Max also but not keen on losing print size, did you need to change it?
@@scottsavill7207 I ended up not getting a camera as i only use my Max for larger projects, for the most part i use my Bambu X1C which has a camera. I may look at it in the future
I have a ender v3 Se and been looking at the creality wifi box with cam or what you just had idk what is better
0:34 the hole looks like it says "69" Niceeeee
Lol yeah it does, I honestly never thought of that. Nice 👍