Roof chopping, customising and stretching the back of the cab - 64 Toyota Stout build.
ฝัง
- เผยแพร่เมื่อ 6 มี.ค. 2024
- In this episode, I deconstruct the roof and rear wall pieces and commence the roof chop and cab extension.
I ended up chopping it below the window, this was the window will stay proportionate.
When the roof is chopped, the top piece moves downward and the B pillar pieces need moving outwards at the base to line back up with the outside of the body. This creates a wedge of blank space which needs filling. Instead of filling the gap, I made some new upper a pillars and whilst doing so, I deleted the rain gutters, extended it 60mm, added a swage line and rounded the edge of the door opening off.
Whilst removing the rain gutters, I added a little subtle lip to the back of the cab above the rear window. To take away a bit of guesswork, I drew the back of the cab to scale on the computer and then printed the template. The technology is there so why not use it.
I also made quite a few new pieces to replace rust/ save plugging up spot weld holes. the lower corners were remade as they fell short after the body drop and body section.
In the next video I'll be filling in the back of the floor after the cab extension. Cheers for watching! - ยานยนต์และพาหนะ
![บุกร้านไอศกรีม VJ วุ้นเส้น !!!! [ดูคลิปเต็มหน้าช่อง] #Short | PANG ORNHIRA](http://i.ytimg.com/vi/g549nEhKZdc/mqdefault.jpg)
Awesome build. I love that it's some of the best metal shaping I have ever seen, and it's happening in a shed with dirt floors down under!
Thankyou! I appreciate the kind words 😊
Agree
Found this on insta initially which led me here. Some of the best metalwork skills I have seen here in Australia. I only wish I was that talented. Well done and looking forward to further videos. Loved the cab stretch too.😊
Artistry at it's finest. Hello from Edmonton Ab Canada. Why do you hammer the welds? Is that to relieve the metal so it doesn't change the shape?
У меня ещё на начале видео слова закончились, остались одни эмоции. Супер, Божественно👍🤗
You should be able to press the like button more than once !!
Awesome work !
Thankyou!!
Well said, i agree.
I’m 62 you rock I can learn a lot from you.
Thankyou!
I've said it before...and i'll say it again...top quality work and finish....
Always appreciated. Thanks 😊
I accidentally saw this video on TH-cam and watched all the videos with this cabin. And I immediately subscribed to your channel. It's immediately obvious that you are a fanatic of your work.
Thankyou for the sub!!
@@khaosdesign3441 How did you learn to handle metal like that? Did someone teach you?
I haven't seen a woman this skilled ever! Awesome work I'm jealous !!
Thankyou!!
I would say I have never seen anyone this age, this skilled. A master. Maybe the rare person after 30 or 40 years of the the trade might be this proficient.
i agree
never mind shes a girl i havent seen anyone that talented in general in a long time she belong at some highly renound car customizers like ring brothers foose or something like that she's amazing
Не заздріть. Краще порадійте і використайте її досвід для своє справи.
Best part about your videos is they are great tutorials for anyone wanting to learn 😊 your skill now is amazing I can't wait to see what you do over the next 10-20 years
Thankyou!! 😁
If I saw that at a show or on the streets I would have assumed a team of people did this not just a single person alone that's insane skill work
Thankyou!
Found your channel an hour ago. Watched the floor pan/tunnel video. Im speechless.
Thankyou!!
Same, i have to seeing all that car building videos. my feelings are like that 😵💫😮😁
Dunno why the gods of Algorithm served this up. Saw the bulkhead (firewall) and wondered who would make panels for something as old and oddball as this. All was revealed and I was hooked. Always nice to see skills at this level. Top stuff.
Thankyou!
@@khaosdesign3441 Kudos where it's due. That you're one of the 51% without a Y chromosome came as a surprise quite a long way in. As someone who was repeatedly told 'you can't' when I was a kid, it occurs that if young lasses were to see work like that demoed in this vid, it might say to them contrary to society's expectations: 'You can if you want to'.
Mechanical engineer by trade myself. Such impressive work, i wouldn't even know where to begin with a project like this. Art and fabrication together. So excited for the next update!
Thankyou! Glad you are enjoying the build
That is some REALLY impressive metal working 😮
Thankyou!
Amazing work as usual. This is Ron Covell level of panel fabrication. Beautiful work 🤘🤘
Thankyou!!
I don’t know where she’s from but she’s talented and beautiful.
I fell in love with the master and his work! Well done!
Not a dude but thanks!
Awesome 👌. Nothing short of magic. Would love to hear how u learned the trade n the tools n equipments you use. Pls make longer videos covering more details and some explanation of tricks n tips... from ur fan 😊
Thankyou!! Yes I do plan on making a video like that. I just hate talking in camera 😅
Khao, the best way to talk on camera is too get a friend to ask you questions it works... you are incredibly talented
For such a young lass to have such fine skills in dismantling a cab piece by piece and then to rebuild it is a master class standard of workmanship! You leave a few guys in this field of fabrication for dead. I can think of a few here in the UK and the USA (I am not even in their league) that are nowhere near as skilled. Obviously a lost of time, effort, money, dedication and discipline makes your skills shine!
Thankyou!! Appreciate the kind words :)
Much respect! You have crazy mad skills! You have more natural talent than ppl I've seen on TV. Great work!👍
Thankyou!!
The master skills at her best taught well piece by piece but in the end she was perfect
Thankyou!
your work speaks for itself, PPE exists for a reason.
Agreed. I was cringing.
Чем дальше, тем исходного авто всё меньше. Остается произведение искусства ручной работы.
Thankyou!
@@khaosdesign3441 keep going. Great, inspiring job, especially welding. Welding quality far beyond repair or restore, it is literally art. And sheet metal forming, ahh… so good. I’ve personally never seen such specialist 👍
Just discovered your channel through this video. This is some magnificent craftsmanship!
Thankyou!
I can’t even line up two square pieces let alone anything like this. You are absolute magic.
Thankyou! It’s all just patience I think. Anyone can do it if they put their mind to it
Work that is second to none. I'm speechless.
The best body work I have ever seen . So neat. No short cuts. Beautiful TIG welding.
Thankyou!!
Just WOW ma'am. This just came up on my feed and I'm impressed!!! Used to do body and paint in the 80s through the late 90s. Hated the rush rush of the commercial body shops so went back to welding. Still welding, but thinking of going back to fixing my cars /trucks on my own time with no pressure from anyone. Awesome work!
Thankyou! Yes there’s nothing better than working on your own clock. I find it really enjoyable.
WOW! You have the best sheet metal skills! Absolutely flawless.
Thanks for the video!
Thankyou!!
Damn, that's some serious skill, only just found this but will be watching more!
Thanks!!
es para quedar con la boca abierta tu trabajo THE QUEEN OF METAL muchas felicitaciones y sigue deleitándonos con tu obra
Thankyou!
Your fabrication is just unbelievable when you post some it's like okay students sit down classes is in session
Thankyou!!
It really is a pleasure to watch you work. Excellent work.
Thankyou!
You are very thorough in you rebuilds. A good trait that too many men don't have. I like it because when I had vehicles I always tried to do the best I could with what was available that I could afford.
Thankyou! I try to be :)
Just amazing skills, the luv and passion just shines through.
Thankyou!!
Your sheet metal skills are awesome!
Thankyou!
You really know how to make a welder fabricator inadequate, I am humbled.
That panel fit up. Oh so nice. I love how you hammer each tack to keep the fit up in line. Not too close. Not too gapped.
Thankyou! Prep is everything
Very very nice work! Well done.
Thankyou!
The skill... the time involved! It is a pleasure watching a master work the metal! Such a great video!
Thankyou!
That's some serious metal fabrication skills.
Thankyou!!
Amazing, I've been metalshaping in the aviation industry for over 35 years and have been following metalshapers all over the web and you by far are one of the best out there. New subscriber.
Thankyou!!
The quality of your work plus your very strong design sense makes you a real top class fabricator. I have seen a lot of people try what you are doing, but few who seem to have the vision and the skills to make anything they want to a very high standard.
Thankyou!! I appreciate the kind words
I just can't stop smiling thinking dam she's good and with basic tools. The way you just cut it all up you are one of not many who can see it in you head finished. Im looking forward to starting on my bubble top with big wings after I finish my 39 chev pick up . Keep up the great work your giving me great motivation 👍
Thankyou! That’s nice to hear 😁
Від задумки до її реалізації довга дорога. Я радий, що Ви не боєтеся труднощів і наполегливо досягаєте своєї мети.
Thankyou!!
I'm blown away by your work
Thankyou!!
Very inspiring metal work,this will be one nice Stout.
Thankyou!
She is the best fabricator I've ever seen in my life 60+, car guy from Calif. The Rain Woman of car fab or maybe an Asperger-ish fab savant in the bush. Wow. Thank you for sharing.
Thankyou!!
En España estamos alucinando contigo,eres única!!
Thankyou!
Your metal work craftsmanship is so good, you don't even need to mud and paint it!
Thankyou!
Your chanel just popped up as a recommendation and Im so glad it did. Ive never seen custom work like this, im blown away by what ypu are able to do with metal, you have some really interesting tools and an amazing skillset, fantastic work!
Thankyou!!!
I cant believe you left that one piece of original metal on the back..haha. That's insanely awesome work.
Haha yeah there’s not much left of it. Thanks!
Absolutely amazing fabrication skills, and thats coming from and old school panel beater fabricator, just had to subscribe, Absolutely loving every bit of these videos, now in my mid sixties, you go girl bloody loving it, Cheers 🍻 KC Cradle Mountain⛰️ Tasmania Australia 🇦🇺🤝🇦🇺👍😊😎
Thanks for the sub and appreciate the kind words 😁
@khaosdesign3441 my pleasure I'll be watching 👀 😎 😊 ☺️ 🇦🇺🍻🍻
Ultimate panel work plus makes it look so easy great editing.....
Thankyou!
Beyond sick design...such a creative mind.
Thank you! Cheers!
great skills. love your work.
Thankyou!
Her nickname should be chick Foose absolutely incredible girl wow love your channel. You guys should have a posters of the cars you’ve done. I know they’re cliché or whatever but you still sell them online that people could download and make them posters for their garage. They’re incredible. Thank you.
Thankyou!!
She is the best I ever seen. fabricating. Every part of this Truck God bless her
Thanks!
You are my F,ing spirit guide just found your channel so good
Thankyou!!
Incredible work, I am at a loss for words
Thankyou!
Beautiful design, master craftsmen skills, an inspiration to anyone who wishes to do custom body fabrication. Awesome project being stunningly executed,
Thankyou!! 😊
Fantastic work. The sheer amount of hours you covered in this video is staggering. Amazing, keep it up.
Thanks yes a lot of hours!
FANTASTIC. We need more video!!
I am very surprised in south Korea.
Thankyou! Working on it :)
More of this content, love this kinda work and your work.. outstanding!
Thankyou!
Lady coach maker in shorts…. Didnt start out the day thinking this is how it would end but man am I glad it did! Work is so clean, designs so sharp cant wait to see it all come together! Amazing talent would love to hear your story! Keep killing it 💪💪💪
Thankyou! I’m in shorts because it’s been around 35°c here most weekends. Glad you like the video 😁
Don't know what to say but...AWESOME!!!
Thankyou!
There are not many people that would tackle that especially as far as you have there is nothing left that you have not fabricated. This is looking like Australia's next best street machine.
Thankyou!!
My goodness. That is a lot of work for a toyota. But! Its our prject and i will sit back in my chair and watch the meistro.
Thankyou!!
You're awesome at what you do. I used to help make airplane parts and loved it. Keep it up.
Thankyou! Will do
You're amazing. Beautiful build. Respect and best wishes
Thankyou!!
You are a true artisan! I have so much respect for your ability.!
Thankyou!!
This is the most beautiful work I've ever se noen unreal
Thankyou!!
전 한국사람인데요 우연하게 보게 되었는데 부식된 곳을 제거하고 수리하시는게 다른 유뷰버들이랑 차별점이라고 생각됩니다 멋져요 고마워요
Awesome work. Done to perfection.
Thankyou!
stunning...stunning...stunning........
Thankyou!
Второй день смотрю и не могу оторваться. У меня просто нет слов что бы выразить свой восторг! очень круто! за музыку отдельное спасибо
Absolutely Wow....😮😮😮
My brother is a builder and studied at a program by a long-time hot rod customizer. Remade the bed and tailgate for his 47 Food pickup much likes from me. I was awe shocked when you went to the metal brake.... 😮😮😮
Thankyou!!
Thank you for making this video, you have a great day!
Thankyou for watching! You too
keep up with the vids. enjoying the build and the content editing. not much fluff, just builds. better than the majority of those that think I want to see them as talent. no I don't. give me sped up builds.
Thanks! Yeah I hate those sorts of videos too. I try and minimise the talking but sometimes the process needs a bit of a brief explanation.
Top metal fabrication work !
Thankyou!!
That is some very impressive body work done.
Thankyou!
@khaosdesign3441 What thickness material are you using? 1mm or 1.2mm?
Extremely impressive! Not “just” the skills in design, shaping and welding, but also that you take it all apart and work on every panel separately, unlike so many others who just cut a slice out of the pillars, leaving old rust inside, not welding up inner structures etc. This will be much more than just a show car, this is done right!
Wish I had the skills and knowledge!
Thankyou!! I plan to drive it so I want to make sure it lasts a long time. Thankyou for appreciating the work :)
@@khaosdesign3441Please make more long videos! I follow several sheet metal fabricators, and your work is not only on top qualitywise, but also artistically. A Ford ‘32 has been done almost to death, but your Stout is new and fresh, and your designs like the lowered floors, the firewall etc. are soooo cooool!👍🏻
I work in a metal shop and we mainly do sheet metal fabrication. I can honestly say that this kind of skill is rare these days.
Thankyou!!
Mesmerizing work.
Thankyou!!
Perempuan yg benar2 bisa mengerjakan pekerjaan laki laki. Skil dan seni yg menakjubkan
Thanks!
Great metal working skills Miss.
Thankyou!!
Really unbelievable nice job, mastership compliments from Sweden
Thankyou!
Hello, you should teach at school. This job is amazing .Big thanks for sharing this .
Thankyou!
Been a MiniTrucker sense the mid 70’s so when the Stout popped up and as I was watching the first video went to channel WOW time to binge !
Wicked Mad Skills 👏
The Tunnel
Thankyou!!
Rebuilding a complete Ute one piece at a time, Mad Skills!
Thanks!
I just discovered you channel tonight, and I'm absolutely fascinated with your rare combination of excellent design, coupled with serious, old-school fabrication techniques. This build is amazing, and I just subscribed so I can follow the rest of the build!
Thankyou!!
True perfectionist at work
Thankyou!
Amazing work. That looks super clean!
Karl from Make It Kustom suggested to stop by here, and really glad he did. Looking forward to seeing what comes next!
Thankyou!! That’s good of him :)
Had I not seen it for my own eyes ?
Creating replacement panels ?
This is the Epitome of Craftsmanship. Well Done
Thankyou! 😁
I dont know how old you are nor do I care. I just wish I had a shop because I would hire you in a heat beat. That was some of the best metal work I have ever had the plasure of watching. Your a natural and I wish you all the best.
Thankyou for the kind words :)
skills of a coach builder!! so nice.
Thankyou!!
Fantastic! Master of your craft😊😊
Thankyou!
Wow, great metal work!
Thankyou!
Stumbled onto this awesome build, and so glad i did!
The metal shaping and finish is up there with the best on YT!
Cant wait for more on this project, its gonna be epic 👍
Thankyou!!
This is awesome 👍
Thankyou!
Seen a lot of car customisers but none any better than this lady. You go girl!
Thankyou!!
You have some incredible metal shaping skills, and I love seeing your project come to life. Pretty amazing! I just subscribed to your channel, so now I’m gonna go back and watch all the other videos.
Thankyou!!