I'm on a crusade to organize the garage and this is going to be my first purchase. Then followed up with some pairs of cabinets and maybe a smaller wheeled project cart.
You are welcome. I walked by this in Sam's club for a few years before getting it. It is a nice addition to the garage. Thanks for commenting and watching.
Great video. Just built mine in a few hours, but can’t figure out how to adjust the drawers. It says adjust the oval feature on the front of the slider, but it doesn’t match the actual sliders for any of the drawers. Thanks in advance.
Other than all the time it takes to put one together, I think I will be going to Sam's this week and picking one of these up. Thanks for a great review.
It's a nice looking box but a 500 lb loading capacity seems a little weak. For that reason I think I'm going with US general and Yukon boxes from harbor freight
You probably have a lot of tools. I don't have much at home. This was more about organizing the garage. Thank you for commenting and watching. Have a great remaining week and weekend.
This Came up in my recommendation videos...I just made a video on my channel doing the exact same project lol, son of a gun is HEAVY! Nice video sir, I subbed 😁
@@htnowpro lol, that's exactly why I waited on putting mine together until recently. This Texas heat and humidity would have killed me fighting that thing in July.
I have the same box. I had 2 of my employees put it together. I haven’t really paid much mind to it until today and I’m noticing the drawers are sagging. They claim it’s been like that the whole time. Any recommendations on leveling the drawers? I don’t have any direction and wasn’t present for the assembly to see how it’s put together. Any help would be much appreciated. Thanks !!
Hello Tim, there is some adjustment room where the screws attach the drawers to the slides. The video at 6:20 Shows my final adjustments. I know it's a short, fast clip but I think you can see what you need to do to balance the gap between the drawers. Hope this helps. Thank you for watching and commenting. Stay safe.
How has the butcher block held up? I am also in FL and a little worried about the humidity warping it. How do you like it in general since it has been a few years? Thanks for the review!
It has held up grate, no warpage and looks like new. I try not to any heavy work that would damage it. I am very pleased with it and have nothing but good things to say about it. It dresses up the garage real nice. Thank you for watching and commenting. If you decide to get it I hope it meets all your needs. Have a great week.
The price is $409.98 at Sam's club. I am very pleased with it. Helps clean up the garage and helps you organize your tools. Thank you for watching and commenting. Stay safe.
Thank you. Probably a little less then 8 hours with a lunch break 😄. I'm still enjoying it. Looks good and functioning good. Not Snap- On industrial strength but very good for a home garage. Thanks for watching and commenting.
This was a transitional period. We had to move the shed. Later we put it out side and it was OK, till hurricane 🌀 IAN came along. Now it is gone. I recently went with shelves. Thank you for watching and commenting. Have a great weekend. th-cam.com/video/RfuSldv8Ol8/w-d-xo.html
When you visit Seville site it appears that the product is made in the U.S.A. there is no information to tell you otherwise...until you purchase the cabinet and get it home ...then suprise...made in china...so thats why its cheap
Made in China applies to iPhones, iPad, and many things. You could also say...it's made in China and thats why it's affordable. I know, I have a Snap On tool box that costs thousands but for a home storage solution this is nice and substantial enough to get the job done. Thank you for watching and commenting. Stay safe and have a great week.
@@htnowpro The point is when you purchase products from China are in fact supporting a regime who is currently opressing the people of Hong Kong, Muslim minority in the Western part, Tibetans, Indians, has major human rights violations, illegally occupaying Spraty Islands.. etc....
Thank you for sharing. Every tool has specific intended uses. This meets many needs but not all. It dresses up the garage and holds tools. Some do not have the need to hold 100 pounds in each drawer. I also have a huge capacity SnapOn toolbox and would estimate not many drawers are loaded with that kind of weight. Of course, we can all purchase higher end products. The determining factor is "what are your needs and budget?" Have a great week. Thank you for watching and commenting.
Boy, I was looking very tired at the end. I started out very early clearing a place to park the work bench. Long day. Please hit like and subscribe.
Just bought one. This Video gave me The Heads Up how to go about Building It Thanks.
Thank you so much. Enjoy your new tool bench. I know you will;)
I'm on a crusade to organize the garage and this is going to be my first purchase.
Then followed up with some pairs of cabinets and maybe a smaller wheeled project cart.
That sounds like a great plan. It's going to look great and also will make things so organized.
Looks like it could use castors in the center other than that Looks great 👍
That would be a nice addition 👍. Thank you for watching and sharing. Have a great New Year!
Many thanks for putting this video up! Very helpful.
You are very welcome 😊. Glad to be of some help. Thank you for watching and commenting. Stay safe.
Thanks! Great video. I'm considering purchasing one.
You are welcome. I walked by this in Sam's club for a few years before getting it. It is a nice addition to the garage. Thanks for commenting and watching.
I bought one, that's why I found your video. looks good!
Cool. Enjoy 😉 . It makes a great addition to the garage. Thank you for watching 👀.
Great video. Just built mine in a few hours, but can’t figure out how to adjust the drawers. It says adjust the oval feature on the front of the slider, but it doesn’t match the actual sliders for any of the drawers. Thanks in advance.
Glad it helped. I guess I don't under stand the question. I don't remember any adjustments except for slight movement before tightening.
Other than all the time it takes to put one together, I think I will be going to Sam's this week and picking one of these up. Thanks for a great review.
You are welcome. Yes, it surely takes a lot of time and patience for sure. 👍
How lonf does it take to assemble
Took me about 6 hours. Thank you for watching and commenting. Stay safe a d have a great weekend.
Looks like a well built tool chest. I'm debating between this one and a Yukon box from Harbor Freight and this one just has a better look.
I agree 👍this does have a nice look and dresses up the garage well. Thank you for watching and commenting 🙂. Have a wonderful weekend.
It's a nice looking box but a 500 lb loading capacity seems a little weak.
For that reason I think I'm going with US general and Yukon boxes from harbor freight
You probably have a lot of tools. I don't have much at home. This was more about organizing the garage. Thank you for commenting and watching. Have a great remaining week and weekend.
Great Job! I’m sold! 😁
This Came up in my recommendation videos...I just made a video on my channel doing the exact same project lol, son of a gun is HEAVY! Nice video sir, I subbed 😁
Took me a long time to put together in the Florida heat. Thank you for watching and subscribing.
@@htnowpro lol, that's exactly why I waited on putting mine together until recently. This Texas heat and humidity would have killed me fighting that thing in July.
How is the Seville ultra Hd holding up? Also I want to add vice on top
About how long did it take you yo out it together?
It's holding up great. Sorry for the delayed response.
I have the same box. I had 2 of my employees put it together. I haven’t really paid much mind to it until today and I’m noticing the drawers are sagging. They claim it’s been like that the whole time. Any recommendations on leveling the drawers? I don’t have any direction and wasn’t present for the assembly to see how it’s put together. Any help would be much appreciated.
Thanks !!
Hello Tim, there is some adjustment room where the screws attach the drawers to the slides. The video at 6:20 Shows my final adjustments. I know it's a short, fast clip but I think you can see what you need to do to balance the gap between the drawers. Hope this helps. Thank you for watching and commenting. Stay safe.
How has the butcher block held up? I am also in FL and a little worried about the humidity warping it. How do you like it in general since it has been a few years? Thanks for the review!
It has held up grate, no warpage and looks like new. I try not to any heavy work that would damage it. I am very pleased with it and have nothing but good things to say about it. It dresses up the garage real nice. Thank you for watching and commenting. If you decide to get it I hope it meets all your needs. Have a great week.
@@htnowpro awesome, thanks for the update!
@@mikewilliams4089 you are very welcome.
why do you have a shed inside te garage?
It was there just temporarily. It's outside now....lol.
This is on Amazon right now at 260 bucks. Wow!!
Wow is right. Last week I think it was $599 at Sam's Club.
troll
Just 2 questions. Is each box light enough for one individual to move. Second, do you know approximately how long each box was?
It takes two people to move. Length I'm not sure of. Ck Sam's Club
@@htnowpro Do you think it's longer than the "72
@@azn2xcbbjai Overall dimensions without push bars: 72" x 20" x 37.5"H
With the box it will be a little more. Fit in my Navigator
Nice video you might wanna bring it closer up next time 📱
Thank you 😊. Yes Many times I get caught up in the project and neglect good photography 👍. Thank you for watching and commenting.
Why is there a shed inside your Garage :o/ It's weather proof, you know? :op
Yes, but it's not Hurricane proof.
It's not in there anymore. Lol.
I’m curious as to why build a shed in the garage?? Lol
It was only temporarily in the garage. Long story.
what was the price? i been looking too! where did You get it?
The price is $409.98 at Sam's club. I am very pleased with it. Helps clean up the garage and helps you organize your tools. Thank you for watching and commenting. Stay safe.
Nice job. Do you recall the assembly time? I know you mentioned all day but is all day 8 hours or 12 hours?
Thank you. Probably a little less then 8 hours with a lunch break 😄. I'm still enjoying it. Looks good and functioning good. Not Snap- On industrial strength but very good for a home garage. Thanks for watching and commenting.
How much?
$409.98 at Sam's club.
Thanks for watching.
Is anyone else gonna mention the garage inside the garage lol.
This was a transitional period. We had to move the shed. Later we put it out side and it was OK, till hurricane 🌀 IAN came along. Now it is gone. I recently went with shelves. Thank you for watching and commenting. Have a great weekend. th-cam.com/video/RfuSldv8Ol8/w-d-xo.html
When you visit Seville site it appears that the product is made in the U.S.A. there is no information to tell you otherwise...until you purchase the cabinet and get it home ...then suprise...made in china...so thats why its cheap
Made in China applies to iPhones, iPad, and many things. You could also say...it's made in China and thats why it's affordable. I know, I have a Snap On tool box that costs thousands but for a home storage solution this is nice and substantial enough to get the job done. Thank you for watching and commenting. Stay safe and have a great week.
@@htnowpro The point is when you purchase products from China are in fact supporting a regime who is currently opressing the people of Hong Kong, Muslim minority in the Western part, Tibetans, Indians, has major human rights violations, illegally occupaying Spraty Islands.. etc....
@@iflowinc1 Have mercy its just a tool box, 😂😂😂
@@iflowinc1 they are all made in China. Most of the husky and entry level Milwaukee boxes too
Good video but the garage looks nothing like pictured when completed. LOL. Jk
Thank you 😊. It looks a lot better now.
th-cam.com/video/ESFjo80wv-4/w-d-xo.html
Garbage. Capacity should be minimum 75 lbs per DRAWER.100 is better. That junk is a toy. Go to HF and get a toolbox
Thank you for sharing. Every tool has specific intended uses. This meets many needs but not all. It dresses up the garage and holds tools. Some do not have the need to hold 100 pounds in each drawer. I also have a huge capacity SnapOn toolbox and would estimate not many drawers are loaded with that kind of weight. Of course, we can all purchase higher end products. The determining factor is "what are your needs and budget?" Have a great week. Thank you for watching and commenting.