EVERYBODY PLEASE Use 2 zip ties on the breakaway. One as the break point and the other that HOLDS the breaking zip tie onto the anchor / chain links so we don’t end up with thousands and thousands of zip ties being left all over the world by kayakers! The second zip tie keeps the broken one attached to your anchor so that when you retrieve it after breaking away you can then dispose of it properly and not leave it strewn across the ocean floor.
Funny how when it was time to demonstrate how it drops and fits in the deploy tube you connected to both lines, the breakaway and the main. Is that because the main cable gets stuck outside the deploy tube when you reel in your anchor? I hope not. 🤔🤔🤔
sorry for late comment. However, I have been researching kayak anchors and have seen a lot of peeps putting not only an anchor but also a trolly with a rod. Which would you suggest?
Enjoyed your detailed anchor wizard video. I have a hobie pro angler 14. Do you have any videos on anchor wizard detailed videos for this kayak? Thanks
When using the trolley system donyou run the end of the anchor line through the D-ring and connect to anchor? Or is there a different setup like you showed at the end of the video where line through D-ring then through deploy tube to anchor?
Did you try this? I think the anchor line would have to be connected to the trolly system after the deploy tube for it to work. And in that case you’d have to be able to reach back to the deploy tube each time, which isn’t possible on every kayak. At least not on the very rear where I’d like to mount mine. I suppose you could add a short 1-2ft tether fixed to the D-ring with a very small ring on the other end to connect to the anchor line that could fit through the deploy tube? Not sure if that would work without trying it, but on paper it makes sense to me.
@@ThisTall so my work around was to had a clip to the trolley which I then connect the anchor line to once anchor is deployed and I can then use the system had advertised and then unclip from the anchor line an bring in the line with the anchor wizard and pull the anchor up the chute and out of the water
I want that anchor, brand new to kayak fishing and still trying to put my set up together. Really excited about the new hobby and if I win this anchor it’ll just be one less thing I have to worry about to get out on the water safely
Is there a way to install tube section of anchor wizard without drilling into the kayak. I do not have access to the interior of kayak at the stern of kayak. I do have a track, but do not want to drill hole if it can be avoided. Thanks in advance! I have a 2023 Native Slayer 12.5
Nice set up. Love my Jackson BR. But the only thing I seen about the anchor trolley add on is that you would hook it up between the anchor and launch tube, not between launch tube and the hand wench (the spot where your hand was). Its a nice setup for fresh water for sure. But in saltwater, I like the option to unhook my anchor from anchor trolley and drop the line in the water (obviously with a float on the end) to fight the big fish. Once done, paddle or troll back to your float and re-hook. Keep it up, love the videos.
Am new to anchor in my Big Fish 120 . Winter fish around Englewood, Stump Pass . 12’ deepest water I fish in . I used 3 chains 12” long in bike intertubes
I understand the break away system, but what about trying to free yourself in terms of avoid flipping due to crazy swells from big boats. Is there a way to quick release the system or any ideas how to do so. Thanks tight lines🤙
Yes, they sell floats that are designed just for that. The float attaches to the end of the anchor rope and you attach your anchor line to the float with a carabiner, then you can unhook from the float leaving your anchor at the bottom but then returned to the float to retrieve your anchor. If that makes sense, thanks for watching
Ya, try unclipping that line you said shouldn’t be clipped in with the other one and then reel in. Gonna hang up every time on the front of that chute when retrieving.
Exactly the video I was looking for! I needed pointers on setting up my anchor wizard and anchor trolley system. P.S. Your (very long and detailed) video about installing the Yakattack HD Anchor Trolley system was amazing. Thanks so much for making such detailed videos - I really appreciate it!
I want that anchor, it would help me fishing very big lakes on my kayak I kept getting dragged out by current and dont have time to fish the spot i want
![ปฏิเสธไม่ไหว (Crush on you) - LIPTA feat. No One Else [Official MV]](http://i.ytimg.com/vi/NBw1jF342vw/mqdefault.jpg)
I want that anchor!
ANNNNNNDDDDD... You are the lucky winner!! Congrats!! Email me and I will get your info sent over to TightLine Anchors!!
@@KayakUSA1 Sweet!!!!
I’d really like to see how an anchor trolley works with the anchor wizard. Did you ever install it?
When are you going to do the video with you installing the Anchor Trolley for this big rig that will work with the Anchor Wizard?
EVERYBODY PLEASE Use 2 zip ties on the breakaway. One as the break point and the other that HOLDS the breaking zip tie onto the anchor / chain links so we don’t end up with thousands and thousands of zip ties being left all over the world by kayakers! The second zip tie keeps the broken one attached to your anchor so that when you retrieve it after breaking away you can then dispose of it properly and not leave it strewn across the ocean floor.
Nah
Funny how when it was time to demonstrate how it drops and fits in the deploy tube you connected to both lines, the breakaway and the main. Is that because the main cable gets stuck outside the deploy tube when you reel in your anchor? I hope not. 🤔🤔🤔
This was my thoughts too..
sorry for late comment. However, I have been researching kayak anchors and have seen a lot of peeps putting not only an anchor but also a trolly with a rod. Which would you suggest?
I use an anchor always, 🤙🏼
Enjoyed your detailed anchor wizard video. I have a hobie pro angler 14. Do you have any videos on anchor wizard detailed videos for this kayak? Thanks
Actually have one coming soon for ya! Maybe even an anchor give away in that video too.. 😉
I won't that Anchor. Will this anchor work with a 16-foot fishing boat?
Hey grerat video, but I was looking for a standard Anchor Trolly which allows me to change which way my Kayak faces.
Hey brotha my real question is can you use the anchor wizard with a anchor trolley system?? If how would you do it ??
Yep, just pull slack in your anchor line, feed it through your pulley. 👍🏼
@@KayakUSA1sorry I don’t get it still
I want that anchor for my Kayak !!!!Best I've seen in along time !!!!
I have a 10lb mushroom anchor, will the anchor wizard work with that?
Definitely!!
When using the trolley system donyou run the end of the anchor line through the D-ring and connect to anchor? Or is there a different setup like you showed at the end of the video where line through D-ring then through deploy tube to anchor?
Did you try this?
I think the anchor line would have to be connected to the trolly system after the deploy tube for it to work.
And in that case you’d have to be able to reach back to the deploy tube each time, which isn’t possible on every kayak. At least not on the very rear where I’d like to mount mine.
I suppose you could add a short 1-2ft tether fixed to the D-ring with a very small ring on the other end to connect to the anchor line that could fit through the deploy tube?
Not sure if that would work without trying it, but on paper it makes sense to me.
@@ThisTall so my work around was to had a clip to the trolley which I then connect the anchor line to once anchor is deployed and I can then use the system had advertised and then unclip from the anchor line an bring in the line with the anchor wizard and pull the anchor up the chute and out of the water
I WANT THAT ANCHOR! It would be perfect for my duck hunting rig.
Anchor wizzard is a nice system...but with most serious fishing yaks being powered...have you installed a 12 v windlass ..for anchor?
I want that anchor, brand new to kayak fishing and still trying to put my set up together. Really excited about the new hobby and if I win this anchor it’ll just be one less thing I have to worry about to get out on the water safely
I wannnnnnt that Anchorrrrrrr.....💪🔥
" I WANT THAT ANCHOR " New to the sport of kayak fishing, and this would be the best first mod! looks like an amazing setup!
Yup........ I WANT THAT ANCHOR! Thx!
Great video. I was in the market to find an anchor set up. Keep up the good work.
Glad I could help
I want that Anchor. That's Awesome.
Is there a way to install tube section of anchor wizard without drilling into the kayak. I do not have access to the interior of kayak at the stern of kayak. I do have a track, but do not want to drill hole if it can be avoided. Thanks in advance! I have a 2023 Native Slayer 12.5
Just purchased my first kayak. Can't wait to modify it appreciate the videos
"I WANT THAT ANCHOR " Thank you!
I want that anchor. For reals! West Texas winds are no joke! Got me a new kayak and would love to stay out while I wet a line or two haha
I WANT THAT ANCHOR... this anchor seems like a great product and anyone would be lucky to have one...
I want that anchor!! Great video, thanks for sharing. I have to do this for my kayak and my sons!
Alright! An anchor for MY Jackson Big Rig! I want that anchor!
I don't have access to add a nut to the bolt. What hardware would you suggest in this situation?
Oh HECK YES! I WANT THAT ANCHOR!
I want that anchor. It’s great that these guys are looking to give back to the community.
I want that anchor. Superb content. Just have to watch every segment. Easy-ish.
cant seem to find any videos on what screws to use, if you cant get hands inside to use nuts/bolt. Any recomendations?
Nice set up. Love my Jackson BR. But the only thing I seen about the anchor trolley add on is that you would hook it up between the anchor and launch tube, not between launch tube and the hand wench (the spot where your hand was). Its a nice setup for fresh water for sure. But in saltwater,
I like the option to unhook my anchor from anchor trolley and drop the line in the water (obviously with a float on the end) to fight the big fish. Once done, paddle or troll back to your float and re-hook. Keep it up, love the videos.
Awesome video, I want that anchor
Awesome video! I can use this as reference when I win that Anchor! I WANT THAT ANCHOR
I WANT THAT ANCHOR! Thank you!
i want that anchor! really great anchor
Everybody has said it….but I mean it! I want that anchor
I want that anchor!! Cool!
I’m new to kayak fishing can you send a good build list to include a recommended kayak
Great video.....I'm ordering one right now!
I want that anchor! 🙌
Thats a great looking anchor. I WANT THAT ANCHOR!!!
just bought it. thank you for the video, would you mind if I put a link to your video on my channel to let my subscribers know about your install?
No problem, Thanks for watching 👍🏼
Hi I did what you said on your last show. I do want that anchor. Lol... yeah right.
I want that anchor. love your channel
Sweet! I want THAT anchor!!
I want that anchor, keep the content come very helpful and informative
“I want that anchor”. Thing is sweet!
I want that anchor!! Dude love the videos keep them coming.
I want that anchor and another great install video !!!
I WANT THAT ANCHOR!
I WANT THAT ANCHOR....!!!!
Am new to anchor in my Big Fish 120 . Winter fish around Englewood, Stump Pass . 12’ deepest water I fish in .
I used 3 chains 12” long in bike intertubes
Nice! I WANT THAT ANCHOR!
So there is no way to quickly release the anchor in an emergency or just to keep a fish from wrapping up in it?
Cut it off, as long as you have a float on it.
@@gregstabryla9945 His point is that you can’t fit a float on this thing if the anchor goes through the deploy tube.
"I want that anchor" Great video.
I want that anchor. It’s a really nice looking anchor
Yep I need that anchor
I understand the break away system, but what about trying to free yourself in terms of avoid flipping due to crazy swells from big boats. Is there a way to quick release the system or any ideas how to do so. Thanks tight lines🤙
Yes, they sell floats that are designed just for that. The float attaches to the end of the anchor rope and you attach your anchor line to the float with a carabiner, then you can unhook from the float leaving your anchor at the bottom but then returned to the float to retrieve your anchor. If that makes sense, thanks for watching
@@KayakUSA1 Helpful comment.
I want that anchor!🤘🏼🇺🇸
I WANT THAT ANCHOR
Definately want that anchor. Just got my sportsman in a while ago! I want that anchor.
I want that anchor!
Thanks for the opportunity
I want that anchor!! Thank you TJ!!
Just bought first kayak but don’t you need a way to quick release with float for retrieve
Snap hook with a float?
I want that anchor!!! Love it!!
I WANT THAT ANCHOR. Good tip on using that breakaway is a must! 🤞🏼🤞🏼
Absolutely I want that anchor!
I want that anchor!!! Definitely would help me out for catfishing!!!
Merry Christmas!!! I’m planning on getting the Big Rig so I’ll be interested in the build. Thanks TJ!!
"I want that anchor". I have been looking at those for my kayak
I want that anchor ! Solid built and ready for fishing !
I definitely want that anchor!
I want that anchor!!!! But also thank you for the awesome videos!!!
Anchor knot I use is a loop with a match stick. The match stick will break releasing loop.
Ya, try unclipping that line you said shouldn’t be clipped in with the other one and then reel in. Gonna hang up every time on the front of that chute when retrieving.
Yep I think that’s exactly why he had it hooked up when he demonstrated it..
Hi from Sydney Australia
I want that anchor 😎
Exactly the video I was looking for! I needed pointers on setting up my anchor wizard and anchor trolley system. P.S. Your (very long and detailed) video about installing the Yakattack HD Anchor Trolley system was amazing. Thanks so much for making such detailed videos - I really appreciate it!
Great install vid! I was wondering if it could be used with a trolley but you answered that.
Thanks Dusty! I'll be adding a trolley system soon!
That’s one awsome anchor set up love it want it
Pretty epic anchor!!! I want that anchor!
Nice, I want that anchor!!!
Tight lines everyone 👊 I want that anchor.
Sweet anchor!
I want that anchor !!! It would be sweet on my Hobie
Merry Christmas! Hoping for the anchor! 😁
I want that anchor! Looks like an awesome anchor.
I want that anchor!! Please please! 👊🏻🇺🇸🇺🇸
Appears that anchor will hit the yak with every retrieve, am I wrong?
Merry Christmas TJ!!
I want that anchor!!!
I want that Anchor!
I definitely want that anchor
I Want that Anchor! Working on modding my Ascend 128t!
I want that anchor, it would help me fishing very big lakes on my kayak I kept getting dragged out by current and dont have time to fish the spot i want
I want that anchor!
Josh
Awesome build