Hyundai elantra clutch master cylinder replacement | Hyndai Elantra 2012 hard to shift gears
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- Hyundai Elantra Clutch Master Cylinder Replacement : amzn.to/3caRwBJ
energizer 357 : amzn.to/3qz6VE6
visit my website:
www.propphotog...
follow us on
/ prop_photography
/ photographyprop
Canon T6s/760d: amzn.to/3iZ3gej
Canon 50mm Ef lens : amzn.to/3BBvRgV
Canon Zoom EF-S lens : amzn.to/3FHdzxq
US and Canada
Tablet compatible with Dji fly App
amzn.to/36BvS7s
amzn.to/3azdm0G - Samsung
amzn.to/3rgE9Fv - Ipad Air 2
Dji Products
Mini 2 : click.dji.com/....
Fast Charger : amzn.to/3n7sW80
Osmo Pocket 2 : click.dji.com/...
ND filter set mini 2 : amzn.to/3b1uyxu
Osmo Pocket ND filter: amzn.to/3o997y5
Asia :
Mavic mini 2 : invol.co/cl1znhs
world wide : click.dji.com/....
Camera used: invol.co/cl285ek
Buy fast charger : invol.co/cl1pylw
Unlimited movies : invol.co/cl1cbm2
multifunctional extension tube for macro photography : amzn.to/33gm9Bm
speed light : amzn.to/3rHZx85
Tripod : amzn.to/3tkdp7y
Best video on this subject. Excellent explanation. Thank you
Glad it was helpful!
Thank you so much my friend , I have a 2013 elantra gt and started to grind when going to reverse. I had the same wear issue and replacing the master cylinder solved it.
You made it easy.....I can try with the old one now....thank you.....I live in canada too and you saved me a couple hundred bucks
glad it helped you!
Yes brother even if you need any help I am here to help
Thank you!
The clutch pin finally went on my 2005 Hyundai Elantra what do I order and how hard is it to replace it
@@sylviagriffen639 this only works on manual car. the model of your clutch master cylinder might be different from mine as it is 2005.
Getting ready to perform this fix on 2015 Elantra, meanwhile my 2024 Santa Fe is back at the dealer with a leaking sunroof seems its draining into the windshield!
Thanks, I just replaced my clutch master cylinder, car is 13 years old 172k miles, it solved the gears crunching when I put on reverse. The hole was very worn out. BTW, there is a bleeder screw on the slave cylinder.
Just done this on my hyundai i40 ..64 plate ..and thanks saved hundreds of pounds ...👌
welcome! glad it helped!
Definitely useful, i might need to do this some time after replacing my clutch on my Elantra
yeah, the thing is wearing out again and I may have to replace it before the winter comes.
Thanks bud , I have 2013 elentra gt ,I heard grind when I reversed , same problem , so I will replace it soon ,
Thanks
Very helpful, thank you so much. Will be doing this repair to my 2013 Elantra coup soon
glad I helped! thank you for watching.
@@herreraschannel8930 hey actually just one question, where is the clutch bleeder valve on the transmission? I was unable to find mine. I would legit be so grateful if you made a video explaining it
@@threedaysgracefanful there are 2 ways of bleeding it one on the master clutch cylinder and one infront of your engine almost in the middle part its hard to see it on top, you have to see the location underneath then open the valve from the top.
Can I replace only the push rod that is woreout?
@@p3k4d0rproductionz unfortunately no you have to buy the whole clutch master cylinder.
Thanks for video my Veloster 2012 is already giving up
Hi,
Thanks for making this video.
Yesterday, I was driving my elantra MT. I was on full stop and when the traffic light turned green, I had difficulty switching from neutral to first gear. I turned off my engine for 10secs, and started it again.
The clutch went up automatically and I was able to switch the gear to 1st gear
check your clutch hydraulic the master or the slave one infront of the engine below the intake manifold.
the video helps as mine just went out at a red light....that mixed with the fact my transmission fluid was way too low and wouldn't let me shift gears....yea big bad problem...thanks for the video though...now I'll know how to replace the part
How did you know your transmission fluid was low and how did you fill it back up?
I just recently had my slave and master cylinders replaced. I was able to get pressure in the clutch after the repair but after sitting overnight, the problem with no pressure came back. My mechanic and i are really confused why this happened. Do you have any experience with this?
Salamat po manong sa inyong video. Medyo mahirap na makita yung master cylinder sa engine bay.
Hey! Thanks for the video. Hey do you know why would the clutch pad will wear out after replacing the master cylinder?
It wouldn’t. The clutch pad likely was on it’s last leg. I suspect my clutch disc but I see my master leaking. I’m going to replace the master cylinder but anticipate having to also do the clutch if this doesn’t take care of it
I buy a hyunday with thr clutch too low almost touch the back , I think can change...thanks for you advice my frien.
welcome!
I tried every fix including master and slave cyls, damper, it seems to last for a time but back to low bite.
yes because of the cheap plastic rod they use on the master cylinder. We just have to deal with it.
Useful video mate. Thanks
Thanks very helpful
Can you please explain how u bled the system
you dont need to just leave it open and it will bleed it self... press clutch few times with lip open
What happens when you can't push clutch pedal in after replacing master and slave clcindar
Haha, I can see the satisfaction of completing a job. Still a little confused on the bleeding..
yes especially if you saved a ton on labour and parts.
How did you bleed the master. Day two and I still can’t figure it out! Costing me more in renting a car then to take it to a mechanic.
what is the problem are you having right now? is it hard to get into gears? or you don't have pedal at all?
There's a bleeder valve on the sl*ve cylinder
Is their some kinda clip or something other than the two bolts to get the master cylinder out I took the 2 bolts out and it still won't come out.
sorry this might be late but you have to twist the clutch cylinder clockwise and push it out.
I will say that if you replace this and are capable, fitting a metal bushing in the master cylinder rod wouldn't hurt. they wouldn't wear out if they weren't made from plastic or at least had a bushing. such a silly issue.
Yes that's what I thought but when I did that the center of the hole is not accurate it is in off position. Now it is starting to wear out again. That plastic rod.
how long did it take?
I am sorry how long did it take? can you clarify it pls thank you.
Boss anung dot ang fluid sa clutch master
kung ano ung dot flud nung brake mo un din ang gamit sa clutch master cylinder sir.
Clutch master cylinder $40 on Amazon.
Please help 08 Elantra
what is the problem?
I need help with what to order. The clutch pin finally went today 2005 Elantra
@@sylviagriffen639 can you take a picture of the part?
Clutch pedal still stays on the floor after replacing have to pull pedal up no pressure building