Kaabo Wolf X E10 Error 10 Troubleshooting

Hey everybody, I’ve been too busy to edit lately, so I’m test driving the Vision Pro. Please forgive the lower production value of these past few videos. The higher quality stuff is in the works
In this video I’ll explain how to troubleshoot a Kaabo wolf warrior X with Error 10

[@enjay8950]

Thanks for the informative video man, good job. Looks like you're busy with all those scooters in there.
I was wondering, and you might know, On that Kaabo, what controls the headlight? It has high, low, and strobe. Do you know if there is a way to modify it to remove the strobe and just have high and low?

[@ElectricScooterRepair]

The 3 modes are built in to the headlight itself. If you can pulse the power (switch it on and off) it will cycle through the modes but the scooter is setup to avoid that and without replacing the headlight that's all it can do.

[@XYuxgDiabloX]

Hey I’m trying to assemble my wolf warrior x and have no clue where the cables go. Is there any diagram I can follow (preferably with colour)?

[@ElectricScooterRepair]

You're replacing the "junction box"?

[@user-ee4zx6bk5t]

I have a brand new Engwe Y600 scooter and it is showing a J-10 error code. Beeping and flashing lights on the left side of the deck. Do you know what might be wrong with the scooter. Thanks

[@ElectricScooterRepair]

I've never seen that model, sounds like a communication error.

[@hanyu5549]

Appreciate all the information, I fixed my steering notch issue by following your other video. I have a wolf warrior x gt and one of the charge ports won't work. The chargers themselves are fine. Is this a common occurrence? Any tips on how to troubleshoot?

[@ElectricScooterRepair]

First thing to do is open up the deck (shown in another video) and check the 6.3A charging fuses. Most likely one has blown. These are 5mm x 20mm fuses.

[@mikkel4765]

I have a kaboo Mantis 10 pro it shows e10 on the display and the back motor dont work, it says different things online maybe its the display that dont talk to the controller there could be a error or it could be the controller . I am stuck you got any clues maybe? Dit your back motor work when its showed e10. Sorry for your time i just dont no what to do i live in Denmark we only have scooter shops for small segways and like that😅

[@nafi.j]

My wolf Warrior 11 plus having a strange prob. The throttle works by itself I don't have to press it. I have already changed 3 throttles but the prob is there. the only way I stop the scooter is by pressing the brakes but as soon I release the brakes it jumps back again. Any idea what's wrong?

[@ElectricScooterRepair]

I've seen that happen before, most likely somethings gone wrong with the one or both of the controllers. the rear controller is the first on to try swapping out.

[@jeanshavershian4006]

Have you solved the problem?

[@ElectricScooterRepair]

Guess you need to watch the video again!

[@Justplay121]

Hi, I was wondering if you know why my Kaabo Skywalker 10c controller don't last very long, I replaced it 3 times already and it's getting too expensive to replace so often. Every this happened it won't let me charge. I tested the charger and battery were ok. If anyone have the same problem please share. Thanks.

[@ElectricScooterRepair]

I don't have enough info here to say for sure but that kinda sounds like a bad battery, can you describe the symptoms for me?

[@staytreed9123]

Hey