Most definitely. Best purchase we have done. It was a slow start to understand and troubleshoot the issues but once we identified all of them they are great bikes
Hey bro we have chatted before through a clone thread but I had a question if you could help. Those front turns , i ordered them as well super clean , The white wire is the wire that is like a running light right? or if you remember the way you wired it in that would be mad helpful, thanks bro .its also a vader 125
Try the pwk carbs make them vm 22 seem weak with my 125 I had better trottle response and top end with 24mm pwk with then I added a z40 cam fits right in 30$ Amazon couple with a port and polish woke it up was gettin 68mph with Just 17t I made a video on the Z40 Cam the only one who made a video about it You have to switch the end bearings which is if easy and then I had to space my end bearing out 16th of an inch so basically knock it all the way in and then pop it out 16th of an inch so it wouldn't rub on the camp's rocket it ripped made a huge difference they come with HD Springs too 30 bucks can't beat that I went to the details on at 4 valve though I'm running a 28 mm PWKI tune with If are I even welded up my own custom exhaust I've already made like 3 of them Instead of spending the money by an exhaust I bought a welder instead from Harbor freight same price I can make it as many as I want
Is the new swing arm you mentioned in the beginning of the video longer than the stock ? If so how much longer is it, how much did it cost u and do they come in different colors like chrome and what brand is it and where did you order it from, I really like how these bikes look n stand with a slightly longer swing arm like anywhere from one to two inches longer , anything longer than that looks ridiculous to me. I would really like to find one that’s 1 1/2 inch longer that would be perfect, I rather replace the swing arm than install those kits that you insert into the existing swing arm, I rather it be one sold piece which is my personal preference which looks and rides 100% comfortable and I don’t have to worry that something will go wrong like it getting stripped or just simply malfunctioning while I’m out riding. It would be much appreciated if you or anyone else in the comments section could point me in the right direction to purchase one but not to crazy on the price. I was thinking of getting the extended swing arm that comes on the ice bear and just sanding off the paint and fix any welds and just spray it with a couple of coats of some good clear but I don’t know if it would fit but I would really appreciate one that is made from a better quality. Thanks for the video bro FOR showing us your CHERRY AF RIDE HOMEBOY IT LOOKS AND SOUNDS TUFF!! CHEERS FROM EAST LOS ANGELES CALIFORNIA EVERYONE, RIDE HARD N RIDE SAFE MINIHEADS.👌🏼👨🏼🦲👍🏼🛵🏍🛹🌲🔥🍻🍄🥊😉✌🏼💯💯🌲🔥
have you had any problems with the gas tank leaking? RedFox powersports are slow walking me and my vader was bought Feb. 28th.. they have the worst customer service ive ever experienced. the lady hung up on me and THEN BLOCKED ME!!! Im talking redfox!
Dude. I’m sorry. Yea no we haven’t had any issues with the tanks. We had them for about a year now and no issues at this point I would check to see if you can get another tank.
I know this comment is a year old, but can't find a grom for less than $2.5k here and that's typically trashed, without a title, etc. 99% are >3k in my area no matter the year, miles, etc. It's crazy.
My favorite “Freddie line” about the minis…”you don’t know you need it till you get one”. You guys did some 🔥🔥 work on this bike!!
You know it!!
One of the best I've seen
Thanks
the bike looks so bad ass . you guys should start building these and selling them 😉😉
Dude that be dope! Lol
@freddieRODZ you would make Hella money. all 3 of them look soo dope.
Def seems worth it compared to a grom at 4000! Are you guys happy with yours
Most definitely. Best purchase we have done. It was a slow start to understand and troubleshoot the issues but once we identified all of them they are great bikes
i read bore kits are a pain especially since i will be a new rider…. you’ve convinced me to get this bike!!!
Just have to have patience and do your research.
Did you have to do any mods to get the mirrors to fit or are they the exact ones from the link you gave us?
They fit with the protaper bars. Not the stock bars
Hey bro we have chatted before through a clone thread but I had a question if you could help. Those front turns , i ordered them as well super clean , The white wire is the wire that is like a running light right? or if you remember the way you wired it in that would be mad helpful, thanks bro .its also a vader 125
I wanna be in the grom videosssss 🥺 The squad is overdue for some mini adventures! 🙌🏽
Nice
th-cam.com/video/vnjRNz81MFs/w-d-xo.html
Try the pwk carbs make them vm 22 seem weak with my 125 I had better trottle response and top end with 24mm pwk with then I added a z40 cam fits right in 30$ Amazon couple with a port and polish woke it up was gettin 68mph with Just 17t I made a video on the Z40 Cam the only one who made a video about it You have to switch the end bearings which is if easy and then I had to space my end bearing out 16th of an inch so basically knock it all the way in and then pop it out 16th of an inch so it wouldn't rub on the camp's rocket it ripped made a huge difference they come with HD Springs too 30 bucks can't beat that I went to the details on at 4 valve though I'm running a 28 mm PWKI tune with If are I even welded up my own custom exhaust I've already made like 3 of them Instead of spending the money by an exhaust I bought a welder instead from Harbor freight same price I can make it as many as I want
Yes. We have the TB cam on it too. It’s nice. I think my brother is getting the real mikuni and it’s gonna rip too
Idk if it’s already been answered but how are you running two front brakes and a clutch ?
That’s a rear brake and a clutch
Shiii now i want one
Hey just curious on what website you got that nice seat off of
Amazon
Was it worth doing the big bore? You should do a video of the big bore vs a stock 125 if you still have one
I have a video for the big bore. So yes it was worth it
Did you use the stock clutch cable
Yes
you ever upgrade engine mount bolts to larger ones?
No. Since we have a 3rd engine mount. Under the engine. It’s solid.
@@freddieRODZ hold on. the grom clones have the 3rd engine mount ? the bd125 doesnt so which ones do?
No I meant we added the 3rd mount so no need to change the bolts.
What axle sliders are you using?
Mkstunts
Where did you get the wrap?
@@marleymeeko eBay
Is it a Honda Grom wrap and you made it work? I can’t find wrap for the Vader BD125-10 clone
@@marleymeeko check 77decals. Those are the ones we have. They fit pretty good.
What is the actual name of the brand of this grom clone?
Boom Vader
what is the website for the seat, on amazon they are like 150 smh.
That’s how much we got it for.
Is the new swing arm you mentioned in the beginning of the video longer than the stock ? If so how much longer is it, how much did it cost u and do they come in different colors like chrome and what brand is it and where did you order it from, I really like how these bikes look n stand with a slightly longer swing arm like anywhere from one to two inches longer , anything longer than that looks ridiculous to me. I would really like to find one that’s 1 1/2 inch longer that would be perfect, I rather replace the swing arm than install those kits that you insert into the existing swing arm, I rather it be one sold piece which is my personal preference which looks and rides 100% comfortable and I don’t have to worry that something will go wrong like it getting stripped or just simply malfunctioning while I’m out riding. It would be much appreciated if you or anyone else in the comments section could point me in the right direction to purchase one but not to crazy on the price. I was thinking of getting the extended swing arm that comes on the ice bear and just sanding off the paint and fix any welds and just spray it with a couple of coats of some good clear but I don’t know if it would fit but I would really appreciate one that is made from a better quality. Thanks for the video bro FOR showing us your CHERRY AF RIDE HOMEBOY IT LOOKS AND SOUNDS TUFF!! CHEERS FROM EAST LOS ANGELES CALIFORNIA EVERYONE, RIDE HARD N RIDE SAFE MINIHEADS.👌🏼👨🏼🦲👍🏼🛵🏍🛹🌲🔥🍻🍄🥊😉✌🏼💯💯🌲🔥
@@roorozco4517 yoooo it’s the same size as stock. As far as where we got it it’s been a few years since and I think the site is no longer working.
What sub cage/12 bar is on that?
MK stunts
Xpro vader125cc can I build stunt bike like this
That is the exact bike
@@freddieRODZ is jincheng grom clone same?
@@Soulriderpowder yes. They all the same.
@@freddieRODZ how much does it cost to build cage for stunt and what should I do
If I master wheelies on this am I gonna be able to to wheelie on 1200 Harley
Can u stretch the clone
Yea
Where can i buy the fairings
Partzilla for grom fairings.
U can drop this bike n everything I protected?
Pretty much.
Part links
In the description
Can you help me build my clone
Join the clone army Facebook group.
as far as i can tell no one has found a shifter thats not 2 inches longer than stock.
I’m sure it’s somewhere lol
have you had any problems with the gas tank leaking? RedFox powersports are slow walking me and my vader was bought Feb. 28th.. they have the worst customer service ive ever experienced. the lady hung up on me and THEN BLOCKED ME!!! Im talking redfox!
Dude. I’m sorry. Yea no we haven’t had any issues with the tanks. We had them for about a year now and no issues at this point I would check to see if you can get another tank.
u can get a used grom for 2k it will outlast any chinese pile
Agreed. We got these when groms were highly priced a couple years back. Even the used ones
I know this comment is a year old, but can't find a grom for less than $2.5k here and that's typically trashed, without a title, etc. 99% are >3k in my area no matter the year, miles, etc. It's crazy.